DIY decorative fence. Decorative fences for flower beds made of stone Decorative fences for the garden

A non-standard decorative fence that harmonizes with the exterior of the house will attract the views of all neighbors in their summer cottages. If you make a decorative fence with your own hands from scrap materials, it will give you pleasure from the work done and pride in your creation. It is not difficult to carry out such work. It is necessary to come up with a design for a decorative fence, study the materials used and the principle of construction of the structure.

Beautiful fencing for personal plot

Houses and surrounding areas have always been fenced. Now such a building not only encloses the site, but also has a design function, emphasizing the individual characteristics of the house and its owners.

The most traditional type of wooden fence: neat painted picket fence

Decorative fences are a must well-groomed area. They divide the territory into zones and delight the eye with their appearance. To build them you need creative ideas and opportunities for implementation.

Fences are created to implement the following functions:

  1. Decorative – to decorate the area around the house.
  2. Division of zones - divides the territory into recreation areas, garden, vegetable garden, swimming pool, etc.
  3. Protective – for fencing from neighboring residential areas.
  4. Barrier – restricts passage to a forbidden place on the territory. Used when there are small children.

An example of a concrete fence on a site

Let's define what a decorative fence is. The structure has a small height. It can be created for an artificial lake and other parts of the exterior of the house.

Owners of summer cottages often make a ledge to separate the alley or paths from the rest of the lawn. The fence is additionally illuminated with solar-powered lanterns.

Identical fences are placed to highlight similar zones and create a complete design of the territory: large stones of the same type are laid out, and a low plastic ledge is laid along the entire perimeter of the beds.

Fence from willow twigs for the garden

The height and length of the decorative fence are determined by the place of its application.

For flower beds and gardens, barely noticeable fences are needed; walls 1 meter high and higher are used to protect the territory. They are made from heavy, massive materials.

The design of the fence does not have to be invented. To do this, you can use the Internet. The network allows you to study a large number of photos depicting different ones made with your own hands from scrap materials.

Drawing of a forged decorative fence

Advantages

If you decide to make a decorative fence with your own hands, it will decorate the area garden plot and such construction will save cash. This fencing is distinguished by a variety of shapes and types, which allows you to create it elegant and functional.

Wooden fence for the front garden

It is made entirely from different materials, therefore, creating a hedge gives freedom to the artist’s creativity. The materials from which such barriers are made can be found even in the forest.

If this is not possible, you will have to buy raw materials. In any case, it will be cheaper than hiring workers to install permanent fencing.

Option for making a dividing line from rods

Flaws

The disadvantage of a decorative building is its unreliability. Since it is not permanently installed, the building is susceptible to demolition due to hurricanes and strong winds, especially in the suburbs. If a decorative fence is installed around the perimeter dacha area, it will not save you from robbers and intruders.

Despite everything positive aspects, such protection is easy to overcome

Each material from which the fence is made has its own disadvantages:

  1. Concrete structures have a high cost compared to other materials. They require a foundation to be installed on the ground. Only after this can you begin to build the fence. In this case, you will not be able to cope on your own, since such a fence is heavy. You will have to hire a specialized car.
  2. or wooden structures are highly flammable. Therefore, due to a fire, the tree may completely burn out and the fence will need to be rebuilt. To avoid this unpleasant moment, you will need to spend money on fire-fighting agents that are used to process such material. However, the main disadvantage of such a structure is that it is short-lived.
  3. Plastic buildings quickly fade in the sun and become dull. Because of this, the barrier has to be thrown out and a new one installed, because general view the area is deteriorating. Plastic often breaks, which means that the fence must be constantly monitored and prevented from mechanical damage. Many manufacturers commit the sin of using toxic raw materials when making fences, so living next to such a fence will be unsafe.

An example of making a beautiful fence with a minimal budget

Ideas for constructing wooden barriers

Building design can get boring at any time. The owner’s task is to build the fence so that, if necessary, it can be easily dismantled.

When designing, craftsmen sometimes use two or more types of materials. Thus, the fence becomes especially attractive and makes the eye stop on it. When choosing raw materials, you need to be guided by your capabilities and goals. In order to do right choice, you should study photos of finished fences, as well as each material separately.

The choice of one model or another is directly dependent on the budget

Tree

Installation diagram of the foundation and picket fence

It is important to remember that a wooden fence does not last long. It must be painted every year to prevent the wood from rotting from natural exposure.

Blanks made of wood are designed in the form of a picket fence, chessboard, wickerwork, lattice or vertical. Most often, owners of summer cottages install classic vertical columns. This type of structure combines simplicity of design and installation.

Drawing for installing a wooden fence on metal poles

When making DIY wooden creations, coniferous trees are used. Usually they take cedar or pine. This wood is more resistant to natural influences and therefore lasts much longer than other raw materials.

Plan for a wooden fence on concrete supports

Stone

Stone barriers have been produced since the time humans began working. They are highly durable, reliable and beautiful. Making a garden fence with your own hands will not be easy, but the result will not disappoint. All materials for production can be found in nature.

The photo shows a stone fence.

The process of laying a stone fence wall

Boulders, gravel, limestone, dolomite stone and crushed granite are used in fencing. If there are no stones suitable for building in the area surrounding the dacha, you can buy them. Artificial stone is especially popular.

It looks no worse than natural, but costs several times less. However, erecting a building made of stone is a very long and labor-intensive process. It requires attention and patience.

Sketch with dimensions of the main elements of the fence from natural stone

The most important advantage of stone raw materials is its natural texture. The finished fence does not require additional parts, since it has the necessary decorative qualities. Photos of such barriers convey the uniqueness of each stone.

Drawing of a metal picket fence with dimensions

Among the shortcomings are:

  1. Heavy weight of raw materials. To move it, you will need to rent special equipment.
  2. Annual anti-corrosion treatment.

It is quite possible to build a metal structure relying on your own strength. For her self-construction You will need special tools and welding equipment. There are a large number of articles and books that describe step-by-step the installation of a metal workpiece.

Scheme for installing a dividing line from a chain-link mesh

Brick fence diagram

A brick fence has the following advantages:

  • reliability. If you install a brick fence in accordance with all standards, it will protect your summer cottage from the effects of external natural irritants and strong gusts of wind;
  • durable use. Brick is not afraid of sudden changes in temperature and pressure, so it will withstand any natural conditions;
  • unnecessary maintenance. The brick structure does not have to be painted or covered with protective materials. It is strong and therefore copes with natural influences on its own;
  • appearance. Brick can add sophistication to a home.

The photo shows a beautiful brick fence.

Example of construction combined with overall aesthetics

You won't be able to save on the cost of bricks. It must be of high quality, but it is always expensive. However, building a structure with your own hands will avoid additional expenses.

Assembling modules from concrete significantly reduces construction time

Concrete is heavy, so transporting it will require special equipment. This is the additional cost of concrete design. When choosing a concrete fence as a fence from neighbors' summer cottages, you should focus on the size of the territory.

DIY concrete fence installation diagram

It is easy to build a concrete building yourself, since it is a prefabricated structure.

Plastic

Decorative plastic fencing is installed to decorate flower beds and alleys in a summer cottage. It is short-lived and fades quickly. If there is a sudden change in pressure, the plastic may burst. It should also not be used as a safety fence as it will not protect against anything.

Appearance of a plastic fence

The advantages of a plastic fence are:

  • ease and speed of installation;
  • low cost of material;
  • ease of use.

Plastic fencing products often imitate natural materials. By spending a minimal amount of money, you can depict any composition on your site.

Pattern of country fencing made of plastic in the form of wicker

It is a dense vegetation of the required length. To create a living fence, conifers or deciduous trees. Less commonly used ornamental plants. IN dacha conditions Most often, living plantings are used.

The photo below shows a hedge.

The idea of ​​protection from living plants

The plant hedge is regularly formed using scissors and pruning shears. An unusual fence requires special care to keep it looking beautiful.

Pros of a living fence:

  • changing shape at any time;
  • unusual solution;
  • budget option;
  • environmental conservation;
  • protection from dust and wind.

Scheme and rules for creating a hedge

To grow green hedge, requires a long time and constant care. If these factors do not frighten the owner of a summer cottage, he will grow beautiful fence, forcing to attract the attention of all passers-by.

From scrap materials

To make a decorative fence from scrap materials, glass bottles, tires, pipe scraps, rods, etc. are suitable. Almost any recycling product is suitable for building a country fence.

Fence made of glass containers

Glass bottles can be beautifully color-matched, laid and secured with cement. A vertical barrier is also built from bottles. To do this, the bottom of the bottle needs to be drilled. Each bottle is threaded onto a metal pin. Several of these structures are installed vertically. Bottles can be painted in different colors.

A shape for a flower bed is cut out of tires, painted and plants are planted. Several made flower beds will decorate the garden plot.

Ideas for creating flower beds from waste tires

The catalog of our online store contains more than 170 accessories for landscape design. The cost of curbs and fences depends on the materials and design.

Benefits of accessories

  • . Curbs. Made from high quality plastic or polypropylene. Fixed to the ground with plastic nails. The standard length of the packaged product is 3 m. They are installed on the border of a bed, flower bed or lawn. Weather resistant. Fan structures are used to create multi-tiered flower beds.
  • . Border tapes. They help create shaped flower beds. Used in the design of lawn edges and separation of bulk materials.
  • . Decorative fences. They are constructors that are connected using special latches, which allows you to make a fence of any shape. Fixed to the ground with mounting feet. Length - 3 m. Some options are suitable for creating sandboxes.
  • . Decorative gravel. Used in the design of alpine slides, flower beds, creating paths and compositions. For these purposes, you can choose multi-colored pebbles, white or gray marble chips, and decorative stones of different colors.

Also in the catalog select weather vanes, bridges, garden figures, artificial grass and other products for decorating a personal plot.

Payment and delivery methods:

  1. Buy goods online with delivery
  • . You can pay for your order in cash or by bank transfer.
  • . You will agree on the date and time of delivery with the operator by phone when confirming the order.
  • . The conditions for the free provision of the service depend on the city, amount and weight of the product.
  • . Unloading of goods, lifting and carrying are considered additional services and may be paid separately, check with the store operator.

Detailed information about intervals and zones by city, conditions for unloading and picking up orders is available on, where you can independently calculate the cost of your delivery in advance, indicating the postal address and parameters for unloading.

2. Order and pick up where you want

  • . When filling out the order form, indicate the date and time convenient for you to visit the hypermarket.
  • . You can pay for your purchase in cash or by bank transfer at the store's cash desks.

Purchased goods can be picked up independently at any of the OBI stores in Moscow, St. Petersburg, Ryazan, Volgograd, Nizhny Novgorod, Saratov, Kazan, Yekaterinburg, Omsk, Krasnodar, Surgut, Bryansk, Tula and Volzhsky.

Modern decorative fencing is an integral part of decorating a suburban area. With its help, you can zone space and fence objects for security purposes. For example, installing such a structure around a lake will protect vacationers from accidentally falling into a body of water. A decorative fence for a summer house performs an aesthetic function. The overall picture of the site will look harmonious if the fence is made in the same style as other objects.

Depending on the goals and design idea for installing a fence on the territory country houses and dachas use natural materials, plastic, as well as improvised means. Fences for external borders or internal zoning of space are most often made of plastic, wood, stone, concrete, and stainless steel. You can buy decorative blocks for fence posts, as well as other fencing elements, at any specialized store.

Many owners find for themselves non-standard solutions registration local area. Do-it-yourself decorative fences for flower beds are made from the following available materials:

Today it is quite easy to buy a decorative fence. However, having made it yourself, you can enjoy not only the original design, but also the creation process itself. By choosing materials that you already have at home, you can save money. Alternatively, you can purchase any materials in the store and handle the design and installation yourself.

Plastic fence for flower beds: justified popularity

Plastic has been used relatively recently to create various types of fencing. At the same time, it is very popular in the construction industry. Widely represented on the market various models plastic structures for decorative fences. They are used to highlight flower beds. In addition, plastic picket fences are installed for zoning a site, fencing a playground and small ponds, and arranging decorative borders.

Important to know! Picket fence is a general name that describes a certain appearance of a section of fence. The design involves placing planks (pickets) vertically, at a short distance from each other. Traditionally, pickets are mounted on a horizontal plank and secured to posts driven into the ground.

Installing a plastic decorative fence has a number of advantages. First of all, this is an affordable option. Competitive prices allow the client to choose any design for their site. Specialized stores offer a wide range of plastic sections and blocks for fencing installation. Color palette This material is also very diverse.

Depending on the purpose of the fence, you can choose sections of different shapes and sizes. If you need to mark flower beds, the height of the fence can be 15-20 cm. Such fences often turn out to be quite durable due to their small size. If you need to fence your front garden, you usually buy taller sections. The sizes must be selected depending on which plants will be adjacent to the fence. For medium-sized bush plants and flowers, blocks 50-60 cm high are suitable. For large garden vegetation, you can choose higher sections.

Decorative fence for the garden made of plastic

A plastic fence for a summer residence can easily copy other materials. Depending on the stylistic features of the site, you can choose fences that imitate wood, brick, stone, etc. At the same time, a plastic fence does not need to be updated every season or protected from the external environment and corrosion. Plus it's beautiful and bright on both sides. You can select plastic fencing blocks for any design project.

To decorate a site, a plastic decorative mesh for a fence, called “wattle fence,” is often used. It looks simple, but noticeably refreshes the area. If there is a need to close the area, blind sections are installed. However, in case of strong gusts of wind, the fence metal frame may get hurt. In the photo country fences You can find many options for using plastic mesh. It is not as durable as metal, but does an excellent job of fencing flower beds and front gardens.

Decorative blocks for a plastic fence are easy to install with your own hands. They can be placed both on a flat surface and on slopes. Most often, blocks are inserted into the ground with light pressure. If necessary, any section of the fence can be easily removed and rearranged. If any part of the structure fails, it will not be difficult to buy and replace the missing part. After all, one of the clear advantages of plastic fencing is its affordability.

Plastic fencing for playgrounds

Due to their properties, plastic fences are often used to fence children's playgrounds. Such structures can be installed both in the local area and inside the house. Moreover, they are very easy to care for. Children's safety is a priority issue in any area where children are located. There are several types of plastic fencing.

Pay attention! Plastic from which fences for children are made play areas, absolutely safe. Children's dishes and some toys are made from the same material.

For very young children under 2 years old, a so-called playpen is most often installed. It looks like a closed circle 70-80 cm high, in which children can spend quite a lot of time. Therefore, it must be as durable as possible. It is important that the blocks do not contain sharp parts or protruding corners that could injure the child.

Fences inside the house are usually used to block children's access to any premises. It would be undesirable for children to stay in rooms where there are dangerous objects, tools, etc. Door barriers are installed to ensure safety. The structure is bolted or placed sideways.

Children's playgrounds must be fenced for play. For such structures there are necessary safety criteria. To prevent taller children from tipping over fences, the height of the fence should be at least 130 cm. Sharp corners and parts should be excluded. It is necessary that the tops of the fence be flat so as not to injure the child during active interaction with the decorative fence.

Decorative fence for a summer cottage made of wood

Decorative designs offer excellent competition to plastic structures. wooden fences. They are used not only for zoning the territory, but also for erecting a fence around the entire site. Since it is one of the simplest natural materials, it has been used in home furnishings for many years. Therefore, today there are a lot of options on the market for decorating areas with wooden fences.

Traditionally, wooden fences are secured to metal posts. The supporting supports are dug into the ground and then filled with concrete. This strength can provide maximum protection for the fence from any external influence. Runs must be made on the pillars, standard size which is 50 mm by 100 mm, after which it will be possible to fix wooden fence. Classic style involves fixing the boards vertically.

No less relevant and interesting is the design of a decorative wooden fence, which is called “herringbone”. Outwardly, it somewhat resembles large ones. The materials and installation follow the traditional style with vertical planks. However, the boards, unlike the classic version, in this case are fixed into purlins horizontally, at an angle of 45°.

Depending on your goals, you can change the angle of the boards. This creates the opportunity to regulate the amount of light that will fall on the area. If you need to create a good shadow and cover the area from prying eyes, the boards are fixed very tightly and almost perpendicular to the ground.

Related article:


Advantages and types of designs, tips on choosing materials and selecting tools, step by step instructions installation of fencing.

When there is a need for a large amount of sunlight to penetrate an area, the angle of the boards is changed in the other direction, creating gaps in the masonry.

Palisade: going to the store or making a fence for your dacha with your own hands

For many years, a wooden fence called a palisade has not lost its popularity. The stockade has been used since ancient times to protect the territory from uninvited guests. The tops of the stakes were specially sharpened so that they could perform protective function. This style is good because prepared stakes can be bought in specialized stores, or you can make them yourself. At the same time, their price is low, but to prepare the material you need to know certain rules.

The bars for erecting a palisade should be made from dry wood, selecting trees of approximately the same diameter. The raw material will need to be dried. Drying wood should take place in a well-ventilated room. In this case, direct exposure to sunlight on the logs should be avoided. They need to be dried for an average of 20 days, after which the wood is adjusted in height, creating pointed edges if desired. Along the entire length, the bars are cleaned of excess knots and uneven textures.

Pay attention! A picket fence made of birch pencils will create a unique color on your site at a very reasonable price.

Installing a palisade on a summer cottage

To install a palisade, metal supports are most often used. Before installing the beams, it is necessary to dig a trench, the depth of which is approximately 1/10 of the height of the stakes. The trench is filled with cement mortar, which ensures maximum strength and durability of the future fence. Since wood is a natural material, it should be treated with an antiseptic before shrinking. This increases the service life of the structure and creates an obstacle to rotting and other natural negative processes.

After preparing the installation site for the palisade, you can begin fixing the treated stakes. They are driven tightly together using special pads on the tool. This is necessary in order to avoid damage to the tops of the fence. There are several traditional design styles. The most commonly used installation is a convex solid palisade, a simple concave palisade, and a double concave palisade. These and other options for the design of palisade fencing are widely represented in the photos of fences for dachas.

Garden fence made of stone: popular materials

There are many advantages to stone fencing. Among them, the main advantage can be identified - the durability of such fences. This material does not require special care and is highly durable. Large selection types of stone allows you to design the site taking into account any design project. The only drawback can be considered relatively high prices for material for stone fencing.

Cobblestone is currently recognized as the most affordable (and therefore relevant) option. It goes well with any wooden structures, and also behaves well in cement mortar. Depending on which minerals predominate in the rock, cobblestones can be brown, terracotta, reddish, or golden. Therefore, a decorative fence for a flower bed using cobblestones will perfectly complement any landscape design.

You can often see in the photo a decorative fence made of sandstone. This stone in nature is also presented in a variety of color scheme. It lends itself perfectly to any type of processing. On the market you can find rough, torn, and hewn sandstone. By its nature, this type of stone is resistant to frost.

Good to know! The official residence of US presidents, called the White House, is built of sandstone.

Dolomite is considered an excellent material for fencing. It is sold in flat plates of various shapes - it is a stone sedimentary rock. Its extraction is carried out in quarries by explosions, after which the dolomite is processed using a grinding wheel. A decorative fence for a garden made of dolomite can be made of any shape using different types geometric masonry.

Limestone and its variety, shell rock, are considered very recognizable materials. This breed has sandy yellowish tones and a relief texture in appearance. Feature limestone - its pliability to any processing. This material is easy to grind and saw, which, however, is also a disadvantage of such a fence. Limestone absorbs moisture very well, so it is susceptible to external negative influence environment. For the feasibility of its operation, you need to consult with specialists in advance.

Granite is rightfully considered the most durable, durable and expensive. The most common stone is dark gray in color. It is mined in blocks and also in crushed form. This is a volcanic rock, so it has maximum resistance to any climatic conditions. Granite stone is not often used for a decorative fence at the dacha. This is a very durable, but at the same time quite expensive material, and therefore experts advise using more affordable types of stones for garden fences.

Decorative fence made of rubble stone

Rubble stone is fractions of various types of stones irregular shape. It is widely used in construction, as it has an excellent quality-price ratio. Thanks to its properties, a fence made of rubble will protect the area from noise, dust, and prying eyes. In addition, it looks reliable and presentable. You can also use rubble to create decorative fences with your own hands. This design will fit perfectly into any landscape designer project.

Rubble stone is sold in small pieces of irregular shape. There are the following types of bute fractions:

  • torn, with uneven edges over the entire area;
  • torn, with corners in certain places for ease of laying;
  • with smooth sides;
  • “flagstone” up to 15 cm thick.

The irregular, torn shape of rubble stone appears due to the fact that it is mined through the process of explosion. The first type, which is not processed in any way, is best selected manually. This will allow you to get good fragments for the future fence. For forming decorative pillars for a stone fence, the second version of the rubble, which has pronounced angles, is suitable. When laying, you need to carefully consider each fragment in order to ultimately form beautiful decorative blocks for fence posts.

Rubble stones with smooth sides are most often used to create fence walls. They can be easily laid horizontally, while creating an impressive, durable wall. Rubble flagstone is also perfect for this purpose. Working on such a decorative fence for flower beds will require patience and skill. A tiled garden border for flower beds will fit perfectly into any landscape: a decorative fence for flower beds made of this stone looks noble and presentable.

Decorative concrete fences: durability and beauty

Due to its properties, a concrete fence is reliable protection plot. You can purchase a decorative concrete fence that combines strength and an aesthetically beautiful appearance. Concrete sections will cost less than stone or brick fencing. They are cast in special forms, with the help of which they create drawings and openwork compositions on the slabs.

Simple manufacturing techniques enable manufacturers to provide a wide selection of concrete fences that meet different styles and designs that contribute to home decoration. The most common installation technology is one in which a fence fragment consists of three horizontal slabs placed on top of each other. The entire block is installed either on supports or using so-called glasses.

You first need to mark the area and prepare a site for installing the supports of the concrete fence. The pillars are mounted at a distance of approximately 2 m from each other. To prepare the glasses yourself, you need to dig holes with a depth of 70 cm to 130 cm and a width of 40-50 cm. The hole must be dug deep in such a way as to exceed the freezing depth of the ground. Depending on the region, the depth of the pit can vary and vary in size by almost half.

Useful advice! At the initial stages of installing a fence, you should use a level - a geodetic instrument to identify the height difference between the supports.

Then you need to fill the prepared holes with crushed stone, about a third. A mixture of gravel and sand, stones, concrete waste or brick chips are also suitable. When the supports are installed in these holes, it is recommended to fill them with crushed stone or other material used. This will create a more stable structure. The columns must be aligned in height to avoid installation errors and ensure a strong fixation.

For convenience and precision of the design, they are inserted into the grooves of the supports. wooden beams. They remain in this position until the pillars are finally ready for the installation of concrete slabs between them. When there is no longer any doubt that the supports are level along the entire perimeter of the fence, cement and sand are poured into the glasses, mixing them to the consistency of thick sour cream. Traditionally, one part cement to 4 parts sand is used. After the mixture has been poured into the holes, you should check one last time whether the posts are level.

This solution dries in about 12 hours. If you have to install a fence on uneven terrain, add soil to the gaps at the base of the fence. After the main structure is ready, all that remains is to insert decorative concrete blocks for taking into grooves. This is just one installation method. The good thing about it is that you don’t have to hire hired workers to do the installation work.

Stainless steel fences for the front garden: types of metal fencing

Decorative metal fence - beautiful modern solution for decorating a dacha or country house. This material easily withstands any environmental influences and does not corrode. In addition, it is resistant to mechanical damage. A stainless steel fence can maintain a presentable appearance for up to 50 years. It does not require processing or special care.

It is easy to create stylish decorative fences from metal for flower beds, front gardens, recreation areas, games and other objects in the local area. Rust resistance is determined by the amount of chromium that is included in the material. Steel containing up to 15% chromium works well under normal conditions. If this value exceeds 15%, the material is resistant to corrosion processes in a particularly aggressive environment and in conditions of high acidity.

There are a lot of options for assembling metal structures. Use individual fragments(pickets) or finished spans. In photos of decorative fences you can often see combined fences (for example, with materials such as concrete, stone or brick). For installation of structures using metal elements use bolts and rivets. In some cases, installation will require welding machine. The ability to install such a stylish fence with your own hands is a clear advantage of this fencing option.

Fences in the form of a lattice with stones - “German fences”

A very reliable option is to create a fence using metal structure filled with stone. Such models are called “German” fences. These are stylish modern fences that are distinguished not only by their impressive appearance, but also by their ease of installation. If you buy ready-made elements of a metal frame, you don’t have to resort to the services of blacksmiths. The stones that fill the interior space may have various shapes, sizes and colors.

To install you will need to create concrete foundation. In this case, you can either use the pit method of placement (that is, concrete only those places where the pillars will be located), or fill a trench throughout the entire territory of the fence. The pillars are located at equal distances from each other, and fence sections are installed between them. It is most convenient to use pipes square shape. However, they can have any design based on the site design project.

It is recommended to use a metal rod for sections. It provides significant reliability and has an attractive appearance. In this case, the rod can be bent in different ways, giving it an original appearance. Of course, forging elements will affect the price of a German fence. However, this type of design is attractive both in its simple design and in more intricate design solutions.

Decorative fences for flower beds made from scrap materials

Many owners of summer cottages and country houses create fences with their own hands. Photos of such works of art can be easily found on the Internet. This method is economical, but not always easy to implement. But for a decorative fence with your own hands, you can choose any available materials. If you need to expand the structure, there will be no need to search for and purchase missing elements.

Do-it-yourself fencing for flower beds is made from plastic or glass bottles. They are selected by color and shape, and then inserted into the ground straight or at an angle. The convenience of this method is that you can zone the territory of flower beds or beds of any intricate shape. There is also the option of combining glass containers with concrete solutions. It is more reliable and original.

If the household has an old, incomplete or simply unnecessary set, it is perfect for creating a fence for a flowerbed with your own hands. The simplicity of this method is beyond competition: elements of the dishes are inserted into the ground, forming any patterns or designs on the site. You can insert old DVDs in the same way. Due to their texture, they will charmingly “play” in the sun.

Pay attention! You can decorate a flower fence in a retro style using old vinyl records. It is enough to cut them in half and insert them into the ground.

No less popular are decorative garden fences made from waste car tires. They can be cut in any suitable way and inserted into the ground, performing various design ideas. Very often, old rubber is painted with colored paints, creating original compositions in the local area. Craftsmen make animals, birds and other figures from tires, which is perfect for decorating a site for families with children.

When it comes to decorating a dacha or country house with decorative fences, there are no trifles. It is important to choose the material and installation method that will hide the shortcomings and emphasize the advantages of the local area. A properly selected fence will be a wonderful decoration of the site.






















Fences arose not much later than houses - this is hinted at by the common root in the words “fence”, “city” and “garden”. For most people, they were protection from the dangers of the outside world. A couple of centuries ago, a decorative fence could only be found in the garden of a titled person.

Times have changed - in a modern suburban area, a fence is not only a means of marking the boundary of the territory, but also a way to improve the appearance of the garden and add the finishing touch to a thoughtful exterior. Decorative fences help draw the attention of guests to the details of the garden composition. In a close community of amateur gardeners original fences certainly become a subject of discussion (and who knows, maybe a cause of slight envy).

Classic garden tradition - figured picket fence and arched entrance Source housenliving.com

Choosing a decorative fence

A decorative fence will not become an obstacle for an intruder and will not protect the owners from prying eyes. This fence performs other functions:

  • Zoning. Decorative fencing is an excellent separator between functional areas within a suburban area, easily separating, for example, a residential area from a recreation area.
  • Accent. The fence in front of the front area (in front of the facade of the house), together with the overall design, serves as the calling card of the owners, an indicator of their aesthetic taste. An elegant fence around a flower bed draws attention to the flower arrangement.
  • Decoration. Such designs give a finished look to flower beds and flower beds without blocking the sunlight.
  • Limitation. The fence sets boundaries for plant growth, protecting paths from grass growth, and the soil in high flower beds from crumbling.

Clear identification of the recreation area: stone border around the flower bed and bench Source pinterest.com

In order for decorative fences for a dacha to fit harmoniously into the landscape, it is necessary to clearly understand their purpose (the purpose of the fence), which will help you decide on the material, size and design. The characteristics of flowers and herbs growing nearby are also taken into account:

  • A fence can be symbolic if it separates a lawn, a path or the edge of a low terrace. You can cross it and calmly continue on your way.
  • A fence 40-50 cm high protects flowers and herbs from energetic pets and the nimble younger generation.
  • The fence must be strong if lemongrass, honeysuckle or climbing rose. They are capable of weaving around a fence and knocking it down.
  • The fence may have additional features. A curb with a raised edge allows the lawn mower to cleanly trim the edge of the lawn.

Natural frame garden path- a fence of fresh flowers Source zabavnik.club

Decorative garden fences: choice of material

Decorative fencing for the garden can give garden territory a feeling of lightness and sophistication. Both natural and artificial materials are used to make fences:

Tree

Technological progress has given humanity many new materials, but wood is still the most popular option, cheap, environmentally friendly and easily fits into any landscape style. Although wood is a short-lived material, the demand for wooden fences is not weakening. Wooden decorative fencing can be divided into several types:

  • Fence (picket). It is easy to recognize by its neat, evenly spaced vertical planks (slats). The picket fence clearly marks the boundary and is therefore often used in the foreground of the site. The classic version is painted in white and has a height of no more than 1 m, with timely care can last quite a long time

A wooden trellis does not deprive the plant of life-giving sunlight Source southerngreenusa.com

  • Lattice fence (trellis). Each section of such a fence looks like a frame on which slats are attached at a selected angle. The design does not provide privacy, but is aesthetically pleasing and can be used as a base for climbing plants.
  • Palisade The ancient powerful fence made of logs pointed at the top has been reduced to the size of a decorative fence around flower beds, flower beds and paths. For arrangement, pegs are used, the height of which can be experimented with (it can be made linear, stepped, with different cutting angles of the stumps, or left random). The texture of the wood is emphasized with stain or clear varnish. Sometimes a log is sawn into pieces of the required length, which are dug around the perimeter of the flowerbed and form a chain of stumps.

The main disadvantage of wooden fences is their fragility. The most thorough processing protective compounds and varnishes will not save the tree from rotting at the point of contact with the ground.

A border made of timber is convenient for a flower bed with low-growing flowers Source: seattlehelpers.org

Plant materials

  • Wattle fence. Traditional fence southern regions has won a strong place among fans of ethno-style. A fence made of intertwined willow (hazel, willow) twigs is an excellent decorative technique for separating zones on a site or fencing a large flower bed. An additional decoration can be a pair of clay pots strung on protruding stakes. This manufacturing technique is used to create a flower bed-basket, suitable for low-growing flowers.
  • Bamboo. Bamboo is durable and lightweight material with a beautiful smooth surface and is often used as an alternative to wood. Bamboo fencing is found in gardens decorated in oriental style. It can last 15-20 years if a wax coating is applied to the surface. The disadvantages of the material are its cost and processing complexity.
  • Forest material. A fence made from thick branches and snags collected from the forest can have an authentic look and be attractive due to its lack of symmetry. Many people will like a country-style fence made of birch or pine poles.

Metal fence as a fence for a recreation area Source in.pinterest.com

Metal

Welded and forged fences are a beautiful and expensive category among decorative fences. They can be divided into:

  • Standard, assembled from prefabricated elements at the factory.
  • Exclusive (copyright), made by a craftsman to order.

All metal fences are durable, have a respectable appearance and are combined with a variety of architectural styles. Most often, a metal fence looks like a decorative lattice attached between brick pillars- coniferous or climbing plants are often planted near it.

Video description

How to make decorative fences in the video:

Sometimes, to fence a flower bed, scraps of corrugated sheeting left over after building a fence or replacing the roof are used. Pieces of suitable size are driven into the soil around the perimeter of the flower bed. This curb lasts quite a long time, as it is made of galvanized metal with a layer of anti-corrosion protection.

Flowerbed fenced with slate slabs Source gameasphalt.ru

Stone, natural and artificial

From natural or artificial stone The result is durable fences that give the site a natural look. IN landscape design use:

  • Natural stone. The pleasure is not cheap, unless you live at the foot of the mountains. Borders and decorative fences are held together concrete mortar or laid using the dry method. Granite, marble, basalt, slate, pebbles and sandstone complement any design perfectly.
  • Mosaic border. A unique design can be obtained using not only river pebbles or paving stones, but also fragments ceramic tiles(often in combination with glass). Stones and bricks of different textures are also suitable for decoration.
  • Brick. Most available material for edging paths and flower beds; It looks especially harmonious next to a house lined with the same material. Sometimes the curb or fence is covered luminescent paint, thanks to which they glow in the dark, giving the garden mystery and showing the boundaries of the paths. For strength, a decorative brick fence does not need a foundation.

The path is separated from the flower beds by a brick border Source etokirpichi.ru

  • Gabion. In modern landscape design this is called metal mesh filled with stones (the main purpose of gabions is to strengthen landslide slopes, bridge cones, and river banks). The mesh is welded from galvanized steel and filled decorative stone- large pebbles, basalt, granite or quartzite. The size of individual stones should not be smaller size cells.
  • Concrete. Strange as it may sound, concrete decorative fences for summer cottages are becoming more and more in demand. New technologies make it possible to produce decorative concrete sections and blocks of different shades - from light (which can be painted after installation) to natural and bright. External side such elements can be smooth, or repeat the texture of natural stone, brick, slate or tile. Such a decorative fence turns out to be just as impressive and durable as a stone one, and is much cheaper.

Decorative plastic fence Source dizainexpert.ru

Plastic

Manufacturers offer a wide range of plastic decorative fences of various colors and sizes. Plastic fencing the shape is tape or sectional; they can be used for:

  • identifying areas of the site (garden, vegetable garden, barbecue area);
  • decoration of flower beds, front gardens and flower beds;
  • garden path design;
  • fencing for children's (sports) playgrounds.

Video description

About gabion in landscape design in the video:

Plastic fences have many advantages:

  • Light weight durability, easy installation.
  • Durability. The service life is 20 years.
  • Diversity. There are picket fences, mesh, wicker and combined options(blind at the bottom and lattice at the top).
  • Easy to use. A plastic fence is resistant to temperature changes, does not require periodic painting (like a wooden one), and is easy to maintain (if necessary, you can wash off the dirt with water).

Plastic mesh prevents lilies from growing Source dizajnhome.ru

Be careful when buying something that is too cheap plastic products. It is likely that a decorative garden fence made of low-quality material will quickly fade, collapse and release volatile chemical compounds that are dangerous to humans.

Available materials

For some it is trash, but for others it is a source of inspiration that allows them to create a work of art. The gardens are decorated with decorative fences made of:

  • Plastic or glass bottles. Most often, bottles are buried with the neck down, forming an original fence along the edge of the flowerbed.
  • Car tires. They (according to the idea) can be cut or painted; from several tires different diameters you will be able to build an original multi-tiered flower bed.
  • Household items. There are flower beds and borders decorated ceramic plates, vinyl music discs and even car wheel discs.
  • Slate. The material remaining after re-roofing is suitable for constructing a durable (albeit discreet) decorative fence. Slate is dug in around the perimeter, with inside strengthening with wood or pieces of reinforcement.
    • Acrylic rod fence separating the pool from the garden Concrete structure doesn't look like an unnecessary detail Source telegraf.com.ua

    Multi-tiered flower bed with concrete fencing Source houzz.com

    Conclusion

    In modern suburban areas, fences have long ceased to be simply a barrier from the outside world. Thanks to the imagination of the owners and designers, they turned into a decorative detail that plays a significant role in the design of the territory. From the variety of shapes and materials, it will not be difficult to choose those that in the best possible way fit into the overall composition of the site.

The garden has been dug up, the seedlings are ready for planting, but in addition to vegetables and useful crops, I would like to pay attention to the beauty of the garden, namely the fencing of the flower beds. Flowers growing singly or in pairs, hanging in garlands from balcony boxes, or arranged into a single composition under the windows of your favorite home will bring joy after a hard day and allow you to take a break from work. But how to preserve this beauty? How to protect flowers from the ubiquitous lawnmower line, from children who are always running somewhere, from dogs who strive to lie down on them? Let's look at a few examples of making a fence using available materials and a minimum number of tools.

Natural stone border

Stone is not an enemy to plants. Many people know that the sculptures created from durable granite, centuries later, brought to this day the beautiful faces of ancient women and the muscular torsos of men. Frozen in stone, they still amaze with their beauty.

And why not use this durable material to decorate your favorite petunias, lupins, cosmos, and marigolds. Granite and marble, of course, are not the most cheap option, but you can resort to the help of improvised representatives of the stone world, for example, cobblestones, which can be found almost everywhere. Having made a considerable reserve, you can cover a fairly large one, thereby protecting it from lawn mowers and other cutting tools.

Options for the shapes of a natural stone fence depend only on the author’s imagination and the amount of source material. The advantage of this fence is its durability, but the disadvantage is its small height and, over time, natural subsidence deep into the soil.

Flower garden fence made of wooden pegs

I'm tired of the old baseboard, why throw it away? Miniature, up to 20 centimeters, wooden fences look very unusual and pleasant, enclosing plants of medium height. The construction of such a fence will take several hours and a couple of meters of old plinth.

  1. First of all, you need to decide on the height, mark it on the base, and saw off the pegs that will make up the fence.
  2. To make it easier to insert such blanks into the ground, it is advisable to make acute angle, and leave the top straight.
  3. The pegs are either dug in or driven into the ground 5 - 10 cm for greater strength. Thus, the workpiece is a peg 30-35 cm long.

The advantage of such a fence is its original shape. The disadvantages include the difficulty of setting a straight line, but using a level, you can achieve greater accuracy.

Fencing made from glass bottles - simple and affordable

Glass is not a new material, much less expensive. After all, you probably have a bottle of beer, champagne, Coca-Cola or lemonade next to the trash can in your house. They will serve as an excellent basis for a decorative fence. All you need to do is collect required quantity glass bottles. For an average sized flower bed you will need approximately 20 -30 pieces. For winter period It will not be difficult to collect such an amount.

The construction technology is extremely simple; after digging a small hole, you need to stick a glass bottle with the neck down and dig it in for greater strength. An ordinary building level will help you maintain a straight horizontal line.

Fences made from glass bottles are durable and look great next to low plants.

Considering possible ways improvement of a flower bed, every owner is looking for the simplest and affordable option. This is easier than creating a fence from stone chips, wood or glass bottles. Let's look at a few more options for decorating floral splendor:

Wooden rods and tree branches as a decorative fence

Twigs and branches - for the fire or for work? It couldn’t be easier to build original barriers from the branches of an old tree that fell under an axe! Naturally, branches are taken as a basis, but their selection is very important.

To decorate a flower bed, it is advisable to use straight or slightly curved rods. Branches that have knots or shoots are not suitable for work, since when green spaces grow, the stems will hang on them and cling. It is advisable to clear straight branches of bark and dry them. The ideal option is also to impregnate them with antifungal agents, but this is not necessary.

The construction of such a fence is carried out as follows:

  1. Straight base stakes are driven into the ground at a distance of 10-15 cm, and twigs or branches are laid between them;
  2. Fastening, for greater stability, is carried out with twine or fishing line. The height of the structure depends on the number of rows placed in this way.

The advantages of the design are simplicity of execution and naturalness appearance. The disadvantages include low durability, generally from 2 to 3 years, and the possibility of bending under the influence of weather conditions.

Another option for wicker fences is a vine fence. It looks very aesthetically pleasing. The method is similar to building from branches and twigs, only due to the length of the main material in the process of laying out the rows, the main support pegs are intertwined.

The advantages of this version of landscaping a flower bed are its excellent combination with the landscape and its aesthetically simple appeal. The downside is that it has a short service life and possible corrosion of the material. Wood processing products will help correct these shortcomings.

Macrame in garden design

The macrame technique, which is based on a special weave of threads, can become a beautiful and an unusual option flowerbed design. Naturally, the main material will be durable twine. You can take any drawing. Detailed diagrams can be found on the Internet or in craft magazines.

The original baubles will be fastened with wooden pegs, which can also be braided to match the main motif. The advantage of this work is its originality. The disadvantages include a fairly long operating time and a short service life.


Fence from dishes (photo)

The dishes are beating fortunately. All that was left of my favorite set were three plates, which were not only embarrassing to put on the table, but also offensive to the point of tears. The saucer is cracked or split in half, no problem, we collect the fragments for the fence, they will serve as an excellent basis for the creative design of a flower bed.

Simply stuck into the ground or embedded in cement mortar, once works of ceramic art, today will become original decoration flowering plants. The simplicity, durability and unusual nature of such a fence is a definite plus; the only disadvantages include some danger for children, because it can break and injure.

DVD discs playing in the sun's rays

Many video and audio lovers often have a fairly large number of unnecessary discs in their homes that have already played their contents millions of times and have lost their freshness and quality. By combining them with a paper clip, wire or fishing line into a single canvas and securing them on base pegs, you can give the flowerbed an unusual, bright and shiny look in all respects.

The disadvantage of such an idea is only the short service life of this fence. Otherwise, she can become original solution in landscape design of any site.

Plastic bottles - a flight of fancy

Leftovers after feasts can also be useful to the decorator of flower beds. Inserted like glass bottles, carefully painted in different colors, they will illuminate the green space with bright notes.

However, it is worth remembering that plastic is subject to deformation when temperature changes, so before directly inserting the bottles into the ground, you should carefully fill them with sand. Possible deformation under the influence of weather conditions is a disadvantage of these fences.

Decorative fences enclosing your flower garden

Items such as an old fence, remnants of roofing tiles or wall plastic, unused metal tape in a roll, forged products and other available material can become an interesting basis for creating a flower fence.

Their presence, in various configurations, will add a touch of chaos and modern colors to the green ornament of plants, forcing the owners and guests of the summer cottage to look at the classic forms from a different perspective.

The variety of design options for flower beds sometimes amazes the most experienced gardener. Wood, glass, stone chips, knitting, weaving and many other materials reveal countless creative ideas owners of summer cottages and simply lovers of aesthetics and beauty.

Let's consider a few more ideas aimed at fencing for flower beds, which use improvised non-standard materials.

Stone border - a classic option for fencing a flower bed in a country house








Creating and decorating flower beds is undoubtedly an exciting creative activity, and flights of fancy here are unlikely to be limited to familiar shapes and materials.

By creating an object of landscape art against the backdrop of your favorite plants, each owner will be able to feel like the creator of something new, unusual, original. The main thing is a positive attitude and focus on a truly grandiose result.