Finishing the veranda outside and inside. External and internal decoration of the veranda What materials can be used to decorate the unheated veranda of the house

The finishing of the veranda can be done by the most different materials. At the same time, you need to take into account that this room is unheated, so it is not recommended to use finishing materials that are not resistant to moisture and temperature changes. In addition, it is not recommended to save money when purchasing finishing materials.

All finishing work can be done independently, without the help of specialists. First you need to create a rough project for the work, then select and purchase materials. The first step is usually to finish the ceiling, then the walls, and finally the floor.

Regular wood trim.

What materials are suitable for finishing the veranda?

The choice of suitable finishing materials is of decisive importance.

Finishing should be done with high-quality materials that are resistant to various negative influences.

This is especially important if the veranda does not have full glazing and insulation. Then the finish will be subject to severe exposure to atmospheric factors, which cannot but affect its performance characteristics.

The most popular material for holding finishing works on the veranda there is a wooden paneling. It is suitable for finishing the ceiling and walls of a room. The lining is made entirely of wood, has an attractive appearance, is pleasant to the touch and exudes a pleasant woody smell. At the same time, the lining, with additional processing, is resistant to various influences, which allows it to be used in different climatic conditions.
Interior finishing can be done using plasterboard sheets. It is important to purchase moisture resistant drywall, which can be used to sheathe the ceiling and walls. This is a material that is safe to use and not exposed to fire. Plasterboard sheets can be easily cut and bent, so the final decoration of the room can be done using a variety of design techniques.
The inside of the veranda can also be finished with MDF. This is a facing material that imitates natural wood. It is quite strong and durable, but is susceptible to moisture, so it cannot be used to decorate the outside of a structure. The best option is use in closed and.
Panels made of polyvinyl chloride. PVC panels are used in recent years increased demand. Panels on modern market are presented in a wide variety of shades, textures and types, so you can easily choose an option for your veranda or terrace. PVC panels are characterized by increased resistance to moisture, high and low temperatures, and chemicals. They are easy to install with your own hands. Caring for the material also does not require special costs.
Siding. Interior finishing using siding is extremely rare. Still, this is a material for finishing work on the outside. It is great for cladding country houses and various buildings on the site. In stores you can find models with imitation wooden lining, natural wood, stone, brick and other materials.

The choice of one or another type of finishing material will depend on the personal preferences of the owners and financial capabilities.

Veranda ceiling decoration

Before finishing the interior of the veranda ceiling, it is necessary to thoroughly treat all wooden elements with an antiseptic composition.

After processing, the frame base is installed, for which they use wooden blocks(suitable size 30x50 or 50x50). They must also be treated with antiseptic compounds. The bars are fastened to the roof rafters using self-tapping screws or long nails. The spacing for fastening the bars is 30-40 cm. In this case, it is important to maintain the horizontal installation of wooden elements, for which you need to use a building level.

Also, a waterproofing material must be attached to the rafters, which will protect the heat insulator and finishing materials from moisture. Thermal insulation materials in the case of a veranda can be mineral wool slabs, polystyrene foam and other traditional insulation materials. Only after this can you begin to attach the outer cladding to the ceiling.

The easiest way would be to attach a wooden panel to the ceiling of the veranda. Installation of wooden lining is carried out strictly perpendicular to the frame bars. It must be nailed to the end with galvanized nails. After covering the ceiling with clapboard is completed, it is recommended to sand it and coat it with any suitable paint and varnish composition.

If the ceiling of the veranda is planned to be finished with PVC panels, then the work is carried out in the following sequence:

First, the initial profile is installed on a wooden sheathing, with which it will be possible to assemble individual PVC panels with each other.
After this, you need to insert a panel sheet into the grooves of the initial profile. The panel is fastened using separate fasteners or self-tapping screws.
Then the next panel is installed in the groove, which must be secured in a similar way.
Further, the work is carried out in the same sequence.
During the installation process, it is necessary to leave a small gap of 10-20 mm in size, which will ensure trouble-free expansion plastic material when exposed to high temperatures.

In the same way, siding panels or MDF can be hemmed onto the ceiling of the veranda. Considering that MDF and siding are presented in stores with many models with a wide variety of designs, this option has recently become a priority for many country homeowners.

If it was planned to hem plasterboard sheets on the ceiling, then it is better to abandon the use of wooden sheathing in favor of a specialized metal profile.

The elements are installed directly on the profile, to which the plasterboard sheets are attached. It is better to fix the sheets using self-tapping screws. Upon completion of the drywall installation ceiling surface it needs to be puttied and cleaned, which will prepare it for final finishing.

Finishing the walls and floor of the veranda

Finishing the walls of the veranda is quite simple: first of all, you need to install a wooden frame made of bars. It is important to carry out the installation as smoothly as possible, checking the accuracy of the installation with a building level.

Nice wood paneling.

If you plan to make a warm veranda, then after installing the wooden sheathing, the walls need to be insulated using a suitable thermal insulation material. Before laying the insulation, a waterproofing film is installed, which will protect the insulator and finishing materials from moisture and condensation. All used wooden materials must be treated with an antiseptic composition. After this, the selected facing material to the wall.

The veranda flooring needs attention special attention. The choice of one type of coating or another will largely depend on operating conditions. To finish the floor of the veranda, you can use terraced or massive board, laminated panels, ceramic tiles and other popular flooring materials. Waterproof laminate and terrace board – best option for finishing. These coatings are quite easy to install, durable, and do not require special maintenance conditions.

Waterproof laminate and decking boards can be used even in cases where the veranda is completely open to the outside and does not have glazing.

In addition, in such cases, as an alternative floor finishing solution, preference can be given to traditional ceramic tiles or modern PVC panels. It is also possible to use linoleum. It is worth noting that new linoleum models have a fairly attractive appearance and excellent performance characteristics, so their cost can be quite high.

Exterior decoration of the veranda

The outside veranda can be finished wooden clapboard, although many experts recommend refusing to use it in external cladding, even if the material has been processed protective compounds. The most popular solution for exterior finishing terraces and verandas is siding, the models of which can imitate a variety of finishing materials. Siding can be easily attached to any base.

For facade works usually used horizontal siding equipped with locking connections. In this case, finishing can be done independently. The main thing here is to make a frame (sheathing) on which installation will be carried out plastic panels siding.

Immediately after the construction of the veranda is completed, many people think about finishing it. After all, it’s not enough just to build it; you need to properly protect it in order to extend its service life. And besides protective function, high-quality finishing plays a decorative role. After all, you must admit that people are greeted by their clothes. And the veranda is the calling card of every home. Therefore, it is important to choose high-quality finishing materials that will cope with all tasks. But, you may encounter the following problem: there are a lot of finishing materials, but you only need one.

Let's look at how to cover the outside of the veranda, find out the advantages and disadvantages of this or that method, and also consider the technology of covering the veranda. This will help you choose the material and work with it.

Material requirements

Since we are talking about covering the outside of the veranda, it is important to understand the seriousness of the choice of material. It must meet certain requirements. For example, have you seen someone wallpapering a house or veranda? No? But why? The thing is that the material is simply not made for outdoor use. The wallpaper will fade in a few days, peel off, or get wet in the rain. From this example, you can understand that the material for covering the veranda must meet certain requirements. Here is the list:

Withstand precipitation in the form of rain, fog or snow.
Resist the influence of ultraviolet rays, do not fade or warp.
Be resilient in front of sharp fluctuation temperatures
Be frost-resistant and durable.
Withstand various physical and mechanical damage.
Be bioresistant and not susceptible to mold, mildew or insects.
Be aesthetically attractive.

Only such materials for covering the veranda can serve you well, remaining durable, reliable and beautiful for many years. What can you choose from? Let's look at the list suitable materials, and video installation instructions for each of them.

Wooden lining

One of the most popular materials for finishing both inside and outside. The lining is made of wood, therefore it is environmentally friendly. In addition, the appearance of the products is simply magnificent. As for the plating process, it is simple. It all comes down to creating wooden frame and fixing the lining on it. Due to lock connection, no seams are visible. The connection points are hidden. But you can fix punks in different ways. Often, clamps, nails, screws or staples are used for this.

Here are the advantages of the products:

Great looks.
Ecological cleanliness.
Easy to install.
With proper processing, the material will be protected from moisture and other atmospheric influences.
The lining is strong and durable.
Thanks to the classification of products, you can choose products according to the price category for yourself, ranging from inexpensive to luxury.
Possibility of laying insulation under the lining.
Versatility. Can be used both outside and inside.

The installation process itself is simple. You can see the technology from this video:

Siding for covering the veranda

This is a unique material that is created for outdoor use. It has all the advantages that we talked about above. There are several types of siding:

metal;
cement;
wooden;
vinyl.

Most often, the last two options are used in finishing verandas. The installation technology is somewhat reminiscent of lining, since here you also need to build a frame and fix the siding to it. But there are some details and subtleties in the work that are different. The material itself is very worthy and is widely used for covering not only verandas, but also houses in general.

Here are the benefits of siding:

Long service life (50 years minimum).
Has a wonderful appearance and a variety of color options.
Easy to use, easy to clean, no need to paint or repair.
It is light weight and flexible.
It is universal, you can choose the material of manufacture yourself.
Installation is quite simple.
Copes well with temperature changes and harsh weather conditions.
It has holes for ventilation and condensate drainage.
The material for covering the veranda will not rot or be attacked by insects.
Durable, practical and does not fade.

Due to its advantages, siding takes a leading position among other cladding materials. Although, like everything, it has some disadvantages:

the material cannot be called environmentally friendly, although this is not so important for cladding the outside of the veranda.
vinyl products burn very well, emitting harmful and toxic smoke;
vinyl products for the veranda become brittle at low temperatures;
metal siding is easy to damage. By bending it once, you will not return it to its former appearance;
Wood siding has a short service life.

You can see siding installation in this video:

Other popular materials for covering verandas

Most often, the materials described above are used for cladding. Although, there are other options that are also in demand. One of them is facing brick. If your house is completely covered with this material, then it would be foolish to use any other material for the veranda. Facing brick quite expensive, but has its advantages. We can note reliability, strength, external beauty, durability, resistance to precipitation and temperature fluctuations. The material is not afraid of impacts and ultraviolet rays. Therefore, we can say that this option is a guarantee of reliability.

If we are talking about wooden house, then the veranda for him can be made in exactly this style. Many people sheathe the veranda with wood; this includes lining. However, a block house or imitation timber (false timber) is often used for these purposes. These are some of the types of lining that differ in appearance and characteristics. A block house is a lining that imitates rounded timber. The material has a convex shape, so after covering the veranda it may seem that it is entirely made of wooden beam. But imitation timber creates the effect of ordinary timber, has rectangular shape. Take a look at the photo to understand the difference in appearance of the materials.

You can decorate the veranda in one way or another. It's up to you to decide. It all depends on desire, preferences and financial capabilities.

It is not always possible to sheathe a veranda. There is another finishing option, which is plastering. Often the house itself is finished using plaster, so the veranda can be made like this. At the same time, you have the opportunity to insulate it from the outside. It is enough to sheathe the veranda with insulating material. plaster the surface using reinforcing mesh, and then perform finishing putty or plaster. At the same time, various plastering options appear. This can be bark beetle plaster, fur coat, structural, decorative or textured plaster. There are plenty of options, and the choice is up to you. At the same time, the material will perfectly resist external influences and protect the insulation inside. So, you can kill two birds with one stone at once. Look at the photo to see what the bark beetle looks like on the surface.

Let's sum it up

As you can see from this article, covering the outside of the veranda is a responsible matter and cannot be delayed. Thanks to the variety of finishing materials, you can choose the option that resonates with you. You will not only protect building material, from which the veranda will be made, but you can also insulate it and give it a beautiful appearance. Then everyone who sees your beautifully decorated veranda will understand that respectable people live in this house. Do not forget about the requirements for the material, and when purchasing, consult with sellers. There is no need to save in this matter, since all efforts and funds may be wasted. Remember the main principle: quality comes first. Then your veranda will last for many years.

It should be as comfortable and aesthetically pleasing as the entire building. This could be the front entrance, which gives the first impression of the interior, or an extension intended for recreation or household needs. One way or another, one of its main purposes is to serve as decoration, without which the house would not look so elegant. It can be designed in the same style as the main building, or differ from it, creating an interesting composition with it and successfully complementing the facade. The walls and ceiling will require a durable and fireproof finish, so we’ll tell you how to cover an unheated one outside and inside.

How to cover an unheated veranda inside and outside

Material requirements

One of the main tasks is to create a coating that does not allow heat to pass through and protects from drafts. At the same time, the walls must breathe, otherwise in the cold season it will be stuffy and uncomfortable inside, especially when it is turned on. A vent valve may solve the problem. Similar devices usually used in city apartments where impenetrable plastic double-glazed windows are installed.

If the house is intended for living all year round, the coating will be required to have good thermal insulation properties. It is advisable to put a layer of thermal insulation under the finishing, covering it with a film that does not allow moisture to pass through. Without such protective measures, water will penetrate into the voids and begin to destroy the material, expanding when it freezes. There will be a smell of dampness in the room, and there may be a smell in the corners.

If the building is garden plot used only in summer, the outer finishing layer must still have good waterproofing properties and reliably protect brick, concrete or wood from getting wet.

One of the most important requirements- fire safety. For a log house or structure made of timber, relaxation can be allowed, but it is still worth making a choice in favor of a non-combustible coating. In the event of a fire, it will retard the flames and may save the lives of people in the building.

Important qualities are also non-toxic. The coating should not cause allergies. If it has a strong chemical smell, it should not be used under any circumstances. Even in an open room it will be impossible to get rid of this “aroma”. When burned, the material will likely release toxic gas. Unscrupulous manufacturers try to sell their goods as quickly as possible. It is usually sold in markets where no one monitors the quality, and is very cheap, so it is better to purchase it in construction stores, where the quality of the product is beyond doubt. Price serves as one of the indicators of quality.

The cladding is required to maintain its properties despite frost, rain and exposure to ultraviolet radiation. If you plan to paint it, it is better to choose the most durable compounds.

How to sheathe the outside of the veranda

Lining

In the case of open verandas, no protective measures are required.

It is most often used for cladding. This is an environmentally friendly material. It is not expensive and has all the necessary properties. To protect the boards from exposure to microorganisms, they are treated with an antiseptic. To protect against moisture, use varnish and. It may contain antiseptic substances. Each board has a small protrusion on one edge that extends beyond the next one. This is necessary to close the voids at the joints. If necessary, the covering is cut and attached to the sheathing with nails, clamps, staples or self-tapping screws.

Wood looks great with any material. If, for example, the question arose - how to cover the pillars open veranda- it’s better to choose a lining.

Siding

In second place in popularity is. It comes in four types:

polymeric;
metal;
cement;
wooden.

It is more resistant to rain and frost, does not fade in the sun and does not require additional processing. Its service life is several times longer.

There are also disadvantages. Polymer products burn well, emitting acrid toxic smoke. Metal ones are fireproof, but they are easy to damage. If you bend one part or make a dent in it, it will no longer be possible to straighten it.

Installation is carried out on the lathing using special fittings and baguette.

Brick

It has the highest strength characteristics. He is not afraid of impacts and scratches. He doesn't care about rain and snow. The service life of a brick is not limited.

Plaster

If the building is built securely and load-bearing structures do not “walk”, its outer part can be covered with plaster. There are decorative compositions and mixtures with improved technical characteristics. You can add any color dye to the composition.

Polycarbonate

Walls and roofing can be made transparent using polycarbonate plates. They are monolithic and hollow. Products can have any color, smooth or textured surface. The material transmits light perfectly and is highly durable. This allows it to withstand loads from more than a meter layer of snow. It weighs a little. To install it, you do not have to assemble massive structures. The slabs are attached to a frame or sheathing.

OSB

For rough finishing, you can use oriented strand boards (OSB). By technical specifications they are superior to natural wood finishes. On open terraces, they are used to make not only enclosing structures, but also floors.

How to sheathe a cold veranda from the inside

WITH inside Heat and waterproofing may also be needed. It is done in the same way as with the external one. The exception is open and semi-open structures.

How to cover the walls

Regardless of what the finishing will be, it is better to protect the load-bearing structures with heat and water insulators. Used for insulation mineral wool, expanded polystyrene foam, polyurethane foam. To protect this layer, polyethylene-based waterproofing is laid on top. Polyurethane foam is applied by spraying using special equipment. In other cases, the work can be done with your own hands. Porous slabs are laid on a wooden sheathing. The seams between them are filled polyurethane foam, the excess is cut off with a knife. Polyethylene is nailed to the top of the sheathing. The joints are sealed with metal tape.

For a comfortable stay on the terrace in the cold season, additional insulation is not required if the walls are made of thick logs or aerated concrete blocks. The thickness of the masonry in this case should be at least 25 cm.

Most often, lining is used for finishing. This is a rare case when a building material has a pleasant natural smell that is good for health. If the terrace serves as the entrance to the home, polyvinyl chloride panels are suitable as cladding. They are easy to wash and are not afraid of moisture. They don’t look as elegant and colorful as natural wood, but unlike it, they keep their shape well when there is a temperature difference in an unheated room.

MDF boards have proven themselves to be quite good. They look like solid wood, but lack most of the disadvantages inherent in birch or pine. The vulnerable point is the edges, which must be closed during installation, having previously been treated with an antiseptic. Otherwise they will crumble.

How to cover the ceiling on the veranda

In first place in popularity is again lining. She is not required to withstand heavy loads, and nothing threatens her at the top.

PVC panels, MDF and OSB boards are also used for ceilings. Weaving and bamboo surface look good.

When choosing plaster, it is better to focus on compositions for facades. They are not afraid of humidity and temperature changes.

You can assemble a transparent polycarbonate roof. In this case, a ceiling will not be required, but even cellular coatings will not be able to create the required level of thermal insulation.

How to finish the floor

Floors have the highest strength. A dye can be added to the solution, but the main advantage of this solution is its reliability.

If the coating requires strength and high decorative characteristics, the best solution there will be tiles. There are a huge number of tiles that differ in price, properties and composition. The material is environmentally friendly and is not afraid of water. There are special coatings that are characterized by increased strength and abrasion resistance.

At low humidity, you can lay linoleum, rubber, even, but it’s better not to risk it. Too much accumulates in an unheated room large number condensate Better to use floor boards, varnished, painted and treated with antiseptics.

Material prepared by: Artem Filimonov

The veranda is a useful open extension that will become an additional area for the house and a transition zone between the living quarters and the street. Most often it is built from wood, and this material needs additional finishing for maximum durable protection from rotting.

The constructed veranda can be lined with siding or MDF panels, but the most environmentally friendly, beautiful and comfortable option– wooden lining. Knowing how to sheathe the inside of a veranda with clapboard, you can create a pleasant interior, and external cladding It will look great from the outside.

Choosing material for home decoration

Lining – classic material for finishing wooden houses. It consists of planed boards on both sides with fastenings that are convenient to install on the frame and connect to each other thanks to a special side profile.

Lining can vary significantly in quality, so it is important to choose the right material for finishing your home. Main options and their features:

Important! When purchasing lining, it is advisable to open the packaging directly in the store and inspect the planks. Often, an unscrupulous manufacturer places a defect in the middle, and then it will be very difficult to prove anything.

There is also a classification according to profile types. Such planks are called eurolining, and they are represented by several types of profiles: “American”, “Softline”, “Landhau” and some others.

Among them, a variety that stands out is the block house - these are wooden slats that replicate a rounded log. With their help, a timber veranda can be turned into a log frame, and from the outside it will be difficult to distinguish the cladding from real tree trunks.

The block house looks beautiful both outside and inside. It can be additionally painted in any color, special vertical strips cover the joints of the “logs”, and the wall will look very neat.

Preparing the veranda for cladding from the inside

It is better to purchase already dried material: planks that have been dried in a special chamber can be used immediately. If you decide to purchase an inexpensive lining natural humidity, then it is better to buy it at the very beginning of summer, and install it only in August. In a few months it will be completely dry and ready for installation. How to line a veranda with clapboard inside?

It is necessary to prepare the following tools and materials:

The wooden planks themselves. The quantity depends on the area of the walls of the veranda: it can only be partially closed, and then it will be possible to get by with minimal costs.

If the glazing has a small area, you will have to calculate the area of each wall and subtract the area of the windows from this value. The result obtained is divided by the area of one plank, and the required quantity is obtained.

Timber for frame construction. Installation will require installation of sheathing in increments of approximately half a meter. Depending on the size of the room, you can calculate the required quantity.
Fastening elements. For internal cladding, clamps are most often used - fasteners that are installed on the base and into which strips are inserted.
Paint or varnish with which it is planned to cover the wood. It requires mandatory processing, otherwise it may suffer from rotting and insects.

When all materials and tools are prepared, you can proceed to installation.

Lining on the inside

How to cover a veranda with clapboard? The first step is to create sheathing on the walls. If the wall is completely flat, as for example, when building a frame-panel veranda, you can do without it, but more often you still have to install a frame and level it with wooden planks. Walls made of timber or logs cannot be perfectly flat, so they have to be adjusted.

To install the sheathing, a beam with a cross-section of 20x40 mm is used; it is attached to the wall at a distance of no more than half a meter between the frame elements. To aerated concrete or brick walls it is attached with dowels, and to wooden ones with self-tapping screws. After this, the frame is checked with a level and wedges are placed for leveling.

The sheathing can be located in both horizontal and vertical directions. But at the same time, the lining will run strictly perpendicular to the frame, so you need to decide how you want the veranda to be finished.

When all frame elements are secured, you can proceed to installing the panels. This work can be done in several ways:

Installation of clamps. This is the most common solution, as it allows you to install the lining without violating the integrity of its surface. Hidden fastening will allow you to sheathe the walls neatly and evenly.
Fastening using staples and a construction stapler. It is also hidden: the staples are driven into the tongue of the lining and attached to the frame. After this, the tenon is closed by the groove of the next plank, and the connection will not be visible from the side.
Hidden fastening with nails. This is a similar method, since the nail heads will be invisible from the outside of the room. To completely hide them, you have to use a finisher.

Once all the strips are installed, you can proceed to decorative finishing sheathing. It is advisable to prime the surface of the lining, then the paint will lie more evenly and will last much longer.

You can choose any shade: you can choose a color in accordance with the furnishings and color flooring, you can purchase a transparent varnish that will only protect the wood from destruction, but will not hide it natural beauty. There are a lot of options available today, and they will allow you to reliably preserve the cladding for many years.

External cladding of the veranda with clapboard

External cladding should be more than just decorative. She will have to endure constant negative impact natural factors, therefore, when choosing, you need to pay maximum attention to strength and reliability.

It is important to choose the right tree species, since the durability of the cladding largely depends on this. The most reliable options:

Larch panels. This tree is practically not subject to rotting, and under the influence of moisture it will only gain more strength. Larch has a pleasant pattern and beautiful color.

Larch is a heavy and very dense material; working with it will not be easy. But on the other hand, it will last much longer than any other breed. This is a fairly expensive type of wood.

Oak is another durable type of wood, but it is also one of the most expensive. Oak panels look just great, so they don’t need to be covered with any opaque means; a regular water-based varnish will be enough.
Cedar – conifer It is not subject to rotting, has a pleasant aroma and a special color. The only negative is the high cost, but the cedar cladding will not need to be changed for a very long time.

More democratic and familiar solutions are pine and spruce; they can be purchased at low cost. These are resinous rocks that can resist decay for a long time, but it is advisable to protect them as much as possible from negative impacts nature. Spruce has more light color, but over time it begins to darken.

Pine will also change color, so they need to be stained. For finishing you can use acrylic, alkyd, oil and other paints, large selection makes it easy to choose the right shade.

How to cover the veranda with clapboard from the outside? General principle The work will be similar: you will need to install a frame and cover it with wooden panels with the chosen method of attaching the planks. However, if you want to make an insulated veranda that will be pleasant to be on even in winter, you need to add a few more steps:

The frame is installed, and the step between its elements should be 1 cm less than the width of the panels of insulating material. This is necessary in order to securely fasten it in the cells of the frame without gaps.
Insulation is placed in the cells of the frame. For this work, you can use mineral wool slabs: it is non-toxic, does not interfere with normal air exchange and retains heat well. It is attached to the wall with special dowels with large heads.
The insulation is covered with a layer of waterproofing, which will protect the mineral wool from premature destruction. The waterproofing film will not allow moisture to enter the insulation.
After this, a second layer of sheathing is installed. It allows you to create an air gap between the insulation and the finishing cladding. For this sheathing, a thin beam is used.
The last stage is finishing cladding. The lining is installed and treated with the selected finishing coating.

As a result, the extension will receive multi-layer protection from the cold, and in combination with warm glazing, the ventilated façade will create a comfortable space. Such a veranda will turn into a full-fledged living room, which will be pleasant at any time of the year.

Veranda or terrace in a private house - great place for the recreation of its inhabitants.

To make it comfortable and create an atmosphere home comfort and peace, its internal arrangement must be given an appropriate appearance.

The most commonly used material for constructing a veranda is wood. And before proceeding with the interior decoration of the veranda, it is necessary to coat the wood parts with an antiseptic solution.

It must be taken into account that this is a non-residential and unheated room, therefore special requirements are imposed on the materials used for interior decoration. To interior decoration verandas had a good appearance for a long period of time and did not require frequent repairs; it was necessary to use high-quality, moisture-resistant materials. If you have basic skills in performing repair work finishing the veranda can be done with your own hands.

This work must begin with drawing up an estimate. Plan the order of work, select and purchase in advance required material so that the interior finishing is done quickly and efficiently. List of works for finishing the veranda:

Selection of materials.
Ceiling finishing.
Covering the walls of the veranda.
Floor covering.

What materials are used to finish the veranda?

If you want to get a beautiful veranda finish, choose quality materials is crucial. The peculiarity of the selection of materials is that in most cases an unglazed veranda attached to a house is more like an open terrace, which is seriously exposed to external environment. Therefore, the material must not only correspond to a certain design, but also be resistant to high humidity, temperature changes and sunlight.

The most common material for such work is wood lining. This material can be used to cover both the walls and the ceiling of the veranda. It's environmentally friendly natural material, has a beautiful appearance and a pleasant smell of wood.

Drywall is waterproof. Environmentally friendly, non-flammable material, easy to install, easy to process, allows for a wide variety of finishing.

MDF is a material that imitates wood. Durable material, the surface of which is made with wood imitation. However, when it gets wet, it swells and loses its quality. Can be used for finishing closed verandas.

PVC panels. Inexpensive, moisture-resistant material, has a rich texture, a wide variety of colors and shades. Easy to install, easy to clean. Durable and non-flammable material.

Siding is practical, inexpensive material. Available in various colors, with imitation wood, house block, lining. Does not rot, is resistant to fire, temperature changes, has a long service life, and is easy to maintain.

Return to contents

Ceiling finishing procedure

The process of making a ceiling begins with its preparation. First of all, it is necessary to treat with an antiseptic and fire retardants. wooden structures veranda ceiling. Then install the frame under the sheathing. The frame is made of bars measuring approximately 30x50 mm. Before installation, the bars are impregnated with an antiseptic.

After it has dried, using self-tapping screws, the bars are attached to the roof rafters in increments of about 50 cm, maintaining horizontality, which is maintained using a level.

If the veranda is closed, the ceiling is insulated, which allows you to use the veranda until late autumn. To insulate the ceiling, first a waterproofing film is installed and attached to the rafters, then insulation is installed between the rafters. Mineral wool or expanded polystyrene is used as insulation. After completing this work, the ceiling is sheathed with clapboard or other material.

The lining is laid perpendicular to the frame slats and nailed into the end with thin galvanized nails. After installation, the surface of the lining is sanded and varnished.

When covering with PVC panels, a starting profile is installed in the corner of the room on the sheathing; it helps to assemble the panels together. Then a panel sheet is inserted into the profile groove. It is attached with self-tapping screws or special holders. The next panel is placed in the groove, secured, and so on. During installation, a compensation gap of about 2 cm is provided, which is then covered with a plinth.

Similarly, the ceiling of the veranda is covered with siding and MDF.

To install drywall instead of wooden blocks as lathing, it is better to use a special metal profile. Elements are installed on the profile, to which sheets of plasterboard are attached using self-tapping screws.

After this, the surface of the veranda ceiling is puttied, cleaned, and it is ready for finishing. You can glue it as a decoration vinyl wallpaper, paint or cover with artistic plaster.

Return to contents

Veranda wall cladding

A frame made of wooden blocks is installed on the walls, the verticality of which is checked with a level. If necessary, the walls are insulated. A waterproofing film is installed on the outside of the wall, which is secured with slats, then insulation is installed and the sheathing is attached. Wooden elements are pre-treated with an antiseptic. Then lining or other finishing material is attached to the frame. And their finishing is carried out.