Today, more and more people are finishing the facades of private houses with siding. This material appeared with us quite recently, but has already managed to displace many types of cladding used before it. This happened because siding is not at all expensive, but it is very aesthetically pleasing. appearance and easy to install.
If you decide to decorate the facade of your house with siding yourself, then first you need to find out what types of this material are on the market. Among them, the most commonly used are:
- vinyl siding;
- metal siding;
- fiber cement siding.
In addition to the three listed types, there is also basement siding. It imitates stone or wood, and it is almost impossible to understand from a distance that it is neither one nor the other. Recently, they began to decorate not only the bases of houses, but also entire facades. This material looks very impressive. Among the options for finishing the facade of a house with siding, you can choose not only different textures, but also combinations of colors and shades.
Vinyl siding is most often used for finishing houses in country houses and gardens. Its advantages include:
- long service life - from half a century;
- resistance to corrosion;
- inertness of the material - it does not react with chemicals;
- relatively low cost;
- has a rich palette of colors and textures;
- does not melt or burn;
- prevents condensation;
- it is easy to care for;
- there is no need for periodic treatment with antiseptic substances and painting.
Metal siding has special edges with holes for fasteners. It is durable, light-resistant, and can last 30-35 years. The material is not exposed to high and low temperatures, as well as harsh climate. Its advantages are:
- Metal siding can be installed both horizontally and vertically;
- variety of components;
- has increased reliability. This applies to both the material itself and the locks;
- installation is carried out on any type of surface;
- work can be carried out in any season;
- a wide range of different colors.
Fiber cement siding is produced by mixing cement, wood fibers, various additives and water. The mixture then hardens and becomes very durable, waterproof, fire-resistant and insect-resistant.
A house decorated with this material looks very aesthetically pleasing. If over time you get tired of its color, fiber cement siding can be painted. In addition, it does not require complex care - it is enough to wash it with plain water.
If you have set yourself the task of self-finishing the facade of the house with siding, the photos presented in this article will help you decide on the type of material.
Installation of sheathing under siding
The cladding can be attached to any surface. Facade finishing wooden house siding is carried out on the same principle as finishing brick house. Doing this yourself is quite simple, the main thing is that the base is level.
To secure the material to the wall, it is necessary to mount the lathing. It can be metal or wood. The first will require U-shaped profiles with a cross-section of 27x60 mm, and the second will require bars measuring 40 and 70 mm. The walls of the house need to be prepared in a certain way, namely:
- remove window and door frames, as well as all other convex elements;
- remove dirt and old peeling paint or other finishes;
- if there is lining on the walls, then you should check the reliability of its fastening, secure the loose elements with self-tapping screws;
- after this, the surface of the walls must be treated with an antiseptic. This is done to prevent the development of mold and mildew due to moisture accidentally getting under the casing.
Next, markings are applied to the surface of the prepared walls. The distance between the beams or profiles will depend on how dense and heavy material you have chosen. The lighter it is, the larger the sheathing pitch can be and vice versa.
In addition to the weight of the selected type of siding, it is also necessary to take into account the availability strong winds in your region. If they are constantly present, then it is better to reduce the step.
The direction of the sheathing depends on the direction you choose to install the cladding. If it is installed vertically, then the sheathing should be mounted horizontally and vice versa.
If we are talking about finishing the facade of the house basement siding, there are exceptions here - “Dolomite” can only be attached to a vertical sheathing.
To install metal sheathing, steel plates with perforations are used - hangers or special brackets. The work sequence looks like this:
- We install profiles on both edges of the wall. We will focus on them when leveling the plane;
- Using a hammer drill, we make holes in the wall according to the markings. We insert plastic dowels into the holes and secure hangers or brackets;
- If you want to insulate the facade, then before installing the main profiles you need to fix the thermal insulation to the wall. For this purpose, a slot is made in the material plate opposite the suspension, after which the thermal insulation is put on it. In the same way, a film protecting from the wind is mounted under the sheathing;
- We attach to the brackets located at the edges metal profiles. We stretch a cord or rope between them, along which the remaining profiles will be aligned;
- to give the structure additional rigidity, we make lintels from profile scraps and connect them perpendicularly to the main profiles;
- Upon completion of work, it is necessary to check the resulting plane using a level.
Wooden sheathing is cheaper than metal sheathing and is much easier to install. Before starting work, the beams must be treated with an antiseptic to prevent the process of rotting, as well as the formation of mold and mildew. Sequence of installation of wooden sheathing:
- We cut the beams to a length equal to the height of the wall. If the beam is shorter than the wall, you will need to join it with another piece, but this is best avoided;
- just as in the previous case, we first attach the brackets, and then press the bars against them, align them and fix them with self-tapping screws;
- If you do not put insulation between the wall and the siding, then the sheathing can be attached directly to the wall. In this case, they drill into the bars through holes, through which they are fixed on its surface. To level the sheathing, mounting wedges made of plastic or wood are used.
Facade cladding with fiber cement siding
Fiber cement siding, like any other, is produced either in the form of slabs or in the form of narrow slats of great length. The surface of the material can be smooth or textured. Sequence of work:
- the material is attached to the sheathing using steel nails with a small head;
- nail each fragment, retreating from the edge by 2.5 cm. Next, the nail will be covered with the top plate and will become invisible;
- panels with a thickness of 12-15 mm can be fixed not only with self-tapping screws, but also with clamps - special brackets that create an invisible fastening;
- screws are screwed into thick places, retreating from the edges by 2-3 cm, otherwise chips may appear;
- steel clamps are attached to vertical profiles with self-tapping screws from 0.5 to 2 cm. Such fasteners have the following advantages:
- convenience and ease of installation;
- the cladding remains intact in case of deformation from high temperatures;
- uniform load distribution;
- aesthetic appearance;
- saving time and effort.
- after the frame is assembled, installation begins, moving in the direction from bottom to top. Lay out the elements of the material, starting from architectural features Houses;
- you need to cut the slabs as little as possible and strive for continuity of step in height;
- First, the basement ebb is installed. The distance from its edge to the ground should be 5-10 cm. It is fixed with self-tapping screws on vertical profiles;
- after this, install the bottom row of clamps and attach the vertical strip to the main vertical profile at the joint between the plates;
- the first plate is supported by clamps. In this case, its end parts rest against the vertical seam bar. The cladding in the upper part is secured with clamps. The next slab will rest on them;
- thus, the first row, the second and all subsequent ones are mounted. The horizontal edges of the slabs are joined “lockwise”, and the vertical edges are filled with sealant. Before doing this, it is better to protect the edges of the siding with masking tape so as not to stain or spoil the appearance;
- finishing internal corners, join the slabs at right angles, finishing the outer ones at an angle of 45 degrees. For subsequent application of sealant, it is necessary to provide edges of 0.3-0.5 cm;
- window and door openings are framed either with galvanized steel coated with a polymer or with fiber cement boards.
Finishing the facade of the house with metal siding
By the time wall cladding begins, roofing work must be completely completed. You also need to mount drainage system and finish all manipulations with heavy equipment, such as a hammer drill. Otherwise facing material may be damaged.
Now you can begin installing the siding:
- We attach the starting bar to the wall;
- we trim internal and external corners;
- we frame the openings of windows and doors;
- we install a connecting strip, which is an N-shaped profile;
- we cover the facades of the house with siding;
- fix the finishing strip.
To properly install the trim panel, you need to lift it up until it is aligned with the starter strip. After the lock clicks into place, the material will fall into place. Vinyl cladding is installed in exactly the same way.
To ensure that you do not have any difficulties when decorating the facade of a house with siding, the video below clearly illustrates this process.
The façade is outer side any building. It is important that it not only creates its expressive and beautiful appearance, but also ensures its high protection from external negative impacts. Therefore, many builders use various elements. Recently, facades of houses for siding have been in great demand, and for good reason, because this material has beautiful view, and also has a very simple installation. And in order to choose a suitable base, it is worth familiarizing yourself with its properties and varieties.
Material characteristics
Siding is a material that belongs to the types of cladding bases for the facade. Due to it, you can not only protect the facade from destruction from rain, sun, snow, but also give it a more beautiful appearance.
In appearance, these are small panels that are easily connected to each other. For façade cladding, it is placed not end-to-end, but in a herringbone pattern, so moisture does not get inside these seams. This type of finishing first appeared in America in the 19th century. Later, this cladding, due to its beautiful appearance, began to be used for facade finishing in Europe.
Advantages and disadvantages of house facades for siding
The advantages of siding include the following qualities:
- siding for the facade has convenient installation - the panels are quickly assembled, even beginners in this field can handle their assembly;
- the siding facade of the house is beautiful, bright and expressive;
- thanks to this material, high protection of wooden buildings from the formation of fungus and mold is ensured;
- the panels have fire-resistant properties. They do not ignite even with strong heat;
- long service life;
- have simple care;
- when exposed to sunlight, the siding surface does not fade;
- the base has high water permeability because it has increased resistance to moisture;
- panels can be purchased at an affordable price.
But, despite the presence of positive qualities, it has negative characteristics:
- does not apply to environmental materials;
- some varieties are highly fragile; when bent or under slight pressure, the panels can simply burst or crack;
- some varieties are highly flammable.
Since siding can be of different types, finishing the facade with siding can be made of any type you like. It is often used for private houses and cottages. So what types of siding are there? It is worth highlighting the most common:
- vinyl;
- acrylic;
- metal;
- wooden;
- wood-cellulose;
- steel;
- made of zinc;
- cement.
Acrylic 
Wooden 
Metal 
Vinyl 
Made from zinc 
Fiber cement Vinyl
Vinyl material is used for finishing low-rise building structures. This material consists of PVC, so it is suitable for the facades of private houses, cottages, bathhouses, garages, and various outbuildings.
Main features of this material:
- low weight - since these panels are made of polyvinyl chloride, their weight is much smaller and lighter in contrast to metal material;
- easy installation - due to the fact that vinyl panels are quite light and easy to install;
- the base of this type is not susceptible to moisture, for this reason it will not be affected by corrosion over time, which means it will last a long time;
- it is quite easy to process and is a flexible material, but not in winter time year;
- PVC siding can be used not only to protect the building from various negative factors, but also to give the house a beautiful, bright and aesthetic appearance;
- Absorbs external noise quite well;
- no polyvinyl material required great care. Simply spray it with water from a hose.
Acrylic
Acrylic siding has recently become often used for cladding various structures. The design of the facade using acrylic cladding will become bright and expressive. Thanks to its qualities, covering the facade with siding will be an excellent protection on the street from external negative factors.
Advantages of this material:
- has high strength both panels and sheets. This material has a high degree of protection against negative external factors;
- acrylic siding is not exposed to chemicals;
- has a small degree of deformation. This property concerns impacts, ultraviolet radiation, and strong temperature changes. Due to their plasticity, acrylic panels are quickly restored even after severe damage;
- Another feature of the acrylic facade is the color, which can be varied. When choosing this material, you can choose not only the color, but also the shade.
Metal
House siding facades are often made of metal panels. They are highly wear-resistant, easy to maintain, and they also give buildings a beautiful appearance.
Wooden
If the house is built of brick, but you want to make it wooden, then in this case you can use wood panels. Moreover, they have a variety of designs, structures, and colors.
Positive qualities of this material:
- beautiful appearance;
- house cladding can be made of various types of wood;
- provide high reliability;
- have increased resistance to moisture;
- due to the presence of resins in the composition, wood panels provide high protection to the structure;
- can be used for walls made of any base and with different coatings - paint, plaster, putty;
- simple installation - even non-professionals can handle the installation of wood panels;
- There are no difficulties during care. Simply spray the surface of the panels with water from a hose.
Wood pulp
Siding made from wood-cellulose base is the most inexpensive, which in appearance is no different from wood. It is a mixture of tree species, which are pressed under high pressure and temperature into boards similar to MDF. For high strength and water resistance, resins are added to the composition.
Positive qualities of wood-cellulose material:
- environmentally friendly;
- low cost;
- a wide selection of colors - this quality gives everyone the opportunity to choose suitable panels for cladding the house;
- simple installation - the panels are attached using the tongue-and-groove method.
Steel
Steel siding is panels that have a highly durable structure. They can have a variety of designs and can be made from different types metal From the outside, they have different colors and shapes - lining, ship plank, crown (the shape of logs), as well as other types.
These panels can be used for finishing houses, garages, cottages, and they are also used for finishing public and industrial buildings.
The advantages of steel material are as follows:
- high strength;
- varied design;
- low fire resistance - steel material does not ignite;
- durability;
- not exposed to external negative conditions;
- wide application;
- easy installation and further operation.
Made from zinc
Zinc material is very rare in construction market. Even though it has a high cost, it justifies it. This material has high strength, which can protect the entire house for a long time from external negative influences - rain, snow, wind. Although it was invented quite recently, all reviews about it are only positive. Available in different colors and shapes, so you can easily purchase required material. Be sure to first look at photos of house facades.
Cement
Recently, siding from cement base. It can be used as basement siding for facades. The features of this material are as follows:
- the composition includes cellulose and cement fibers;
- has high reliability and practicality;
- has elegant colors that give the home a cozy feel;
- An excellent option for using it as an option is stone siding. Stone siding will make the house not only protected, but also unusual;
- fits harmoniously into any landscape design;
- released in different options, colors;
- has low cost.
Siding for finishing the facade of houses is very comfortable material, which can protect the house from destruction for a long time.
In addition, it gives it a more aesthetic and beautiful appearance. Selecting this material will not be difficult, especially since there is now a wide range of it on the construction market. And the cost of the panels is not too high, of course it depends on the base.
Video
The video will demonstrate options for finishing house facades with siding.
Photos of facades under siding
The selection contains photographs depicting buildings decorated with siding.
External finishing work pursue several main goals, of no small importance among which is attractive decorative look. On at the moment Many materials are used, but houses covered with siding look the most original and aesthetically pleasing. The products are presented in a wide stylistic variety, which allows you to realize your design imagination.
The use of different types of siding for finishing the outside of a house
There are several main types of material that are in stable demand.
Vinyl
The most popular products are made of PVC. The cheapest options are made from recycled materials, which reduces attractiveness and durability. Quality panels stand out for their wide decorative variety, including various imitations.
Among all types of such siding, the block house especially stands out. When used, the coating takes on the appearance wooden log house thanks to reliable reproduction of color and texture.
Vinyl block house - imitation of a wooden frame
Acrylic
Can be used as an alternative to vinyl. The material also applies to polymer type, but has more modern technology manufacturing, which consists in the use of special components. The front coating of such parts is not subject to fading, which helps maintain decorativeness and color saturation throughout the entire service life.
Acrylic siding - quality and color saturation Wooden
It is produced on the basis of a composite, which includes wood raw materials and cellulose. Due to pressing, the material becomes resistant to moisture. Decorative and protective treatment of such parts is most often carried out on last stage manufacturing. You can update the coating after 3-5 years if you want to change the design.
Wooden siding - warmth and comfort Externally, the elements completely reproduce the look of a wooden board, so this finish is difficult to distinguish from natural.
Metal
This facing material includes two varieties:
- Steel products are very popular, since covering a house with such siding allows you to get an excellent imitation of rounded logs. The effect is ensured by an external coating, which is applied in a special way. The result is a rich color and the desired texture. A type of metal siding called “ship beam” is also popular.
Metal siding “ship beam” - Aluminum parts do not have such a wide decorative range, so they are more suitable for cladding industrial and commercial buildings.
Fiber cement
It is made on the basis of cement and cellulose, which ensures high performance properties. Like the previous variety, it perfectly imitates the texture of a wood surface, which can be seen in the photo below. But it is extremely rare due to its high price.
Fiber cement panels - excellent characteristics, but high cost Note! Fiber cement and vinyl options can include not only façade materials, but also products for the plinth, which are successfully used for complete cladding of the house. There are three main types of imitation: stone, brick and wood chips.
Accessories
In order to finish the house with siding on the outside according to the technology, it is necessary to use special fittings. Also, additional elements make it possible to highlight the main color scheme, because most often they are of a different shade. The use of components allows you to harmoniously combine different panels.
How to choose siding color
To sheathe beautifully private house or cottage, you need to pay great attention to the selection of shade. To do this, many factors should be assessed: the size and shape of the building, the presence of other buildings nearby, the need to adhere to the old design idea.
Possible solutions
Different colors of siding allow you to emphasize the advantages and hide the shortcomings of the object.
Light coating
These are white, beige, cream, soft blue shades that significantly transform small houses, giving them volume and solidity. These colors are suitable for buildings with climbing hedges or surrounded by low-growing trees or shrubs.
An interesting effect is obtained if a house covered with beige or other light-colored siding is framed by a small front garden without massive ornaments and decorative items.
When choosing such a finish, it is necessary to place the accents correctly. The fact is that a completely monochromatic facade will not add zest to the building, so it is recommended to highlight windows and doorways. For this purpose, deeper tones are used, combined with the main skin.
Houses sheathed in white or beige siding will look more expressive if the windows and doors are highlighted with dark elements Dark cladding
This design can be gray, dark blue, brown, deep cherry. These colors give the house austerity, visually making it smaller. But for the right choice it is necessary to evaluate the location of the object and the surrounding space.
Thus, brown and rich green tones in the outer skin are especially relevant when you are around big trees with a spreading crown. Although light shades can be used in such cases, dark options can emphasize the status of the owner and his commitment to order.
As in the previous version, we must not forget about accents that help smooth out tension. If you completely decorate the building with too dark shades (blue, black), then the house will look gloomy and uninhabited, so some details need to be highlighted in light.
Small light elements will perfectly complement dark trim Bright lining
This coloring should be clearly thought out. The fact is that overly rich solutions can quickly become boring, cause fatigue, or increase irritability. The shape of the house plays an important role: it should be non-standard, without the same straight lines.
For example, panels yellow you can cover the entire building if it has more than one floor. The complex shape of the roof, facade and windows at a significant height will create an unusual effect. But it is advisable to highlight all openings with white or dark components.
Photo of a house with bright yellow siding To correctly combine the facade and roof, you need to take into account some tips.
Classic combinations
The most popular solution is to combine dark and light shades, the latter being used exclusively for walls. This style is chosen if it is necessary to achieve complete harmony with the surrounding space and avoid pretentiousness. You can also cover the base with stone or use special siding for this.
A monochromatic solution is also classic, but this option will make the house faceless and uninteresting. To avoid this, corners, openings, and the edges of the roof overhang are highlighted. This structure looks whiter, stylish and individual.
Since siding is often chosen to imitate wood (log, timber or herringbone), the walls reproduce texture and texture natural material. In this case, cherry-colored tiles or green corrugated sheets are laid in advance.
You should know! The reverse combination (light roof and dark facade) requires a responsible approach, since the object may turn out to be incomplete, lacking coherence. To avoid this, light accents are placed on a dark background, and all corners and edges of the roof are highlighted in the same shade as the walls.
Non-standard solutions
To make houses decorated with siding more expressive, you can use unusual combinations. So, if the roof is calm blue, then the facade is decorated in yellow, turquoise or beige.
The brown roof is perfectly complemented by light green walls.
Blue and gray surfaces will look standard. To make such a composition look more complete, it is decorated with catchy accents.
A green roof can have many combinations if you want to achieve non-standard solution. Yellow, gray and turquoise panels are suitable for this coating.
If the walls have a complex shape, you need to choose one primary color and highlight all the protrusions with another. This technique is used to level out the massiveness of the structure.
Warm and cool shades are suitable for rustic style. The surface can be covered with basement siding imitating natural stone or the color of baked brick. The base must be highlighted. The appearance of any house will benefit if the pediment differs from the main cladding. You can also create a wide border separating it from the rest of the house.
Siding combination options
The use of different colors when decorating the facade allows you to give a private or country house individuality. Several basic methods are used for this.
Horizontal and vertical installation
The arrangement of panels in different directions is great solution, if you want to make the structure more expressive. In such a situation, there is no need to use different shades color range: the desired effect can be achieved if the main part of the facade is faced horizontally and the pediment vertically.
Interesting options obtained when covering multi-storey buildings. In this case, you need to create a visible border between combined multidirectional elements. The building acquires outline and shape, which allows you to hide existing shortcomings.
Covering in two colors
When choosing this method, the shades must match each other, so it is advisable to have samples of products to evaluate real result. Because it often happens that pictures in catalogs distort the real color.
Facing technology: walls are divided into sections that will be completed in different styles. The tone of the connecting profile for joining the panels is also thought out; it should not attract much attention to itself.
Most often, this combination is used to highlight corners, but it is also suitable for areas above and below the window opening.
Finishing the facades of private houses with siding is quite common nowadays. There is a demand for such material, and for good reason.
True, the work is not cheap if you hire specialists. But if you do everything yourself, then the price of the entire structure will be significantly lower.
Our article will be devoted to this topic. Instructions for performing this work will be provided.
Before installing, you should think twice before making purchases. Finishing with siding has its pros and cons.
And it will be bad to be disappointed after finishing. First, you should look at photos and videos on this topic and then look at all the parameters of this finishing material.
So:
- Finishing the facades of private houses with siding is quite durable and will serve for many years. But this is only if the installation is performed correctly.
If installed and fastened incorrectly, the plates heat up and simply turn out over the entire plane. This is one of the disadvantages of siding; - It is a non-toxic material that will not harm your health;
- During installation, it is possible to carry out additional insulation and hide external communications;
- Finishing the facade of a house with siding with your own hands will significantly reduce the cost of work and reduce the cost. Installation is not that difficult and anyone can do it.
You just need to follow the technology during the work. You don't need any special tools for the job; - The disadvantages include a poor reaction to frost. At very low temperatures, the material can become quite brittle and can easily be damaged mechanically.
Finishing a house with siding
All work can be divided into several stages that are worth performing. The durability of the structure and the correct geometric shape will depend on this.
What is required for proper installation
For continuous work, you first need to correctly calculate and purchase necessary components that will be needed during the work.
So:
- First of all, you will need scaffolding. Then you will feel comfortable at altitude. After all, you need to move freely there, and this is a rather serious issue;
- We calculate the number of siding panels. Everything is simple here. Let's take it total area and divide by the area of one element, this data is on the packaging of the material.
We get the number of elements. An integer is the number of parts.
But here you should first plan your placement correctly. And take into account the waste that you cannot use after trimming; - After this, you should think about the frame, which can be made using metal beams or wood. With the first option everything is clear, but for the second you should take into account that you will need the right purchase.
You should purchase timber with a moisture content of at least 12 percent. Fastening should be done at a distance of at least 50 cm;
External cladding at home solves several problems - improving the design of the facade, protecting walls from weather conditions and insulation. The value of anyone finishing material consists of a combination of several factors - durability, accessibility, decorative properties, ease of installation and maintenance. Finishing the house with siding meets these conditions. Therefore, this is one of the most popular technologies, especially considering that there are several types of facade panels, united by a common name.
Finishing a house with siding – good combination traditions and modernity Source holds.ru
Types of siding and their features
Siding was invented by American settlers. It was made exclusively of wood and consisted of ordinary boards, which were mounted horizontally overlapping in such a way that the upper ones hung over the lower ones. Nowadays there are only several types of materials, and decorative forms even more.
Wood siding
In the classical interpretation, this is edged board, which is attached to the crate. Nowadays, facing the facade of a house with wooden siding is often called “American” in honor of the birthplace of the technology. And in its usual form, a house sheathed in this way looks good, albeit somewhat rustic.
This is what the classic “American” cladding looks like Source hi.aviarydecor.com
Fans of rustic style will certainly like the slightly rough appearance of the façade, made of unedged boards– it gives the house a unique flavor, despite the modern “filling” of the wall pie made of insulation and a protective membrane.
Brutal style for a wooden house Source pinterest.cl
This fastening method, which ensures that the cladding is impenetrable to wind and precipitation, gave impetus to the appearance of profiled facade boards. It greatly simplifies the installation process, since the geometry itself sets the exact step, and inner side mounted to the sheathing with continuous flooring.
The beveled profile of the board with a tenon will make installation easier and faster Source notperfect.ru
Even better in this regard for finishing the facade of a wooden house with siding is “American” lining. To the beveled profile and the protruding edge of the front part, a tenon was added at the upper end and a groove at the lower end, which ensure complete tightness of the skin and protection of the facade from direct penetration of cold air in winter and hot air in summer.
Heat treatment of the “American” façade board significantly increases its service life Source parki48.ru
Fiber cement siding
The composition of this type of siding for finishing a house is artificial stone. But unlike its closest “relatives” among facade panels (the surface of which is made to look like slate, limestone or brick), it imitates cladding wooden board. And in terms of decorative abilities it is in no way inferior to the best examples of natural analogues.
Fiber cement panel is not inferior in “beauty” to wooden siding, but significantly exceeds it in service life Source 2gis.ru
On our website you can find contacts of construction companies that offer finishing and insulation services for houses. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.
Installation takes place according to traditional scheme– with self-tapping screws in the upper part so that the protruding edge of the overhanging panel covers the attachment points. And the inner side, unlike classic siding, is located on the sheathing as a continuous flooring, like a profiled facade board. Although from the front side the cladding resembles a traditional herringbone installation.
Although this is a relative of concrete, the fastening is no more difficult than wood Source fibro-siding.ru
In terms of durability and performance properties, fiber cement siding is one of the best in its class - it belongs to non-flammable materials, painted in mass, practically does not fade in the sun, is absolutely resistant to high humidity and fluctuations in its level, does not change its geometry when the temperature decreases or increases.
Wood polymer siding
This material is made from recycled wood and polymer and is commonly referred to by the acronym WPC, where the “k” stands for composite. Initially, the technology itself was planned as a way to recycle wood waste and obtain boards (panels) for use in the open air - terraces, facades, small architectural forms V landscape design
WPC has the same “specialization” as wood, but is much more durable Source notperfect.ru
It turned out that the cost of production turned out to be higher than that of similar products made from natural raw materials of coniferous species (including larch). But given the long guaranteed service life (from 25 years) without fading, cracking and warping, such siding will pay for itself in the long run. Moreover, it does not require treatment with antiseptics, fire retardants or paint coating.
There are different types structures of WPC profiles for cladding a house with siding. They differ in the thickness of the front part, the shape of the “lock”, the number and location of stiffeners. But they have one thing in common - an imitation of a high-quality wooden board.
Ideal surface quality is achieved already at the manufacturing stage Source woodexotic.ru
And although the type of front surface of the sheathing and the method of joining the panels are more similar to lining or imitation timber, they are still called “siding”.
Metal siding
There are two types of metal from which they are made façade panels“for siding”: aluminum and steel. It is quite clear that the second option is popular for private housing construction due to its higher strength.
The simplest profile is a ship's plank Source zaborprofil.ru
The production technology of steel siding for the facade of a house is the same as that of corrugated sheets or metal tiles - it is a cold-rolled galvanized thin sheet with a protective and decorative coating. And the profile, which has several stiffening ribs that imitate some kind of wooden cladding panel, is responsible for its resistance to mechanical stress. Therefore, those statements that indicate that metal siding is more in demand for cladding commercial or civil buildings than for residential buildings are incorrect.
There are three profile options:
- Herringbone is a classic siding.
- Shipboard - lining or timber.
- Block house is a rounded log.
Photo of finishing the facade of a private house with metal siding (block house) is popular for a rustic style Source 2gis.ru
Vinyl siding
This is one of the popular types facade finishing. The main reason is affordable price. In addition, polymer panels have sufficient strength (provided that the sheathing is done correctly), simple installation and equally simple maintenance, high resistance to any weather conditions, a large palette of colors and textures, and a very attractive appearance. And in terms of durability it surpasses any facade board made of natural wood(even taking into account its heat treatment).
Vinyl siding, although it is an “economy option,” can look very attractive Source liversal.com
Of course, the decorative properties of vinyl siding for the facade of the house is lower than that of natural, composite or fiber cement. But this is if we talk about imitation wood paneling– like metal panels, its artificial origin is obvious. And it copies stone or brick cladding quite convincingly.
One of the options for finishing house siding is vinyl panels to look like stone. Source pinterest.co.uk
New vinyl siding products include: famous company Vinylit Fassaden GmbH. She has a series special type facade panels, which differs from standard ones not only in the profile type, but also decorative design– imitation of decorative pebble plaster.
New on our market - siding with effect decorative plaster Source okostroy.ru
The cost, as well as the appearance, of such cladding no longer belongs to the economy class - on average, a “board” with an area of 1 m² costs almost 2,000 rubles. And the explanation is simple - to some extent, this siding can be called a composite material made of polymer and chips natural stone, which is literally “recessed” into the front part of the panel.
When is the best time to install siding?
Facade cladding is classified as “dry” construction technologies. The only stage when they can be used mortars– This is the preparation of the surface for installation.
If brick wall does not have cracks or crumbling areas, then before covering it can simply be treated with a primer with antiseptic properties. And this is only necessary if the climate is humid, the house is surrounded by trees (or is located on the leeward side of a hill) and there is a high risk of mineral-based fungus or mold in conditions of poor ventilation of the facade.
If it is necessary to sheathe wooden house, then treatment with an antiseptic is mandatory.
Therefore, when they say that siding installation can be carried out at any time of the year, they are lying a little - for preparatory stage often required positive temperature air (average daily should not be lower than +5°C).
Video description
About possible errors When installing siding, watch the video:
Siding installation
Each type of facade panel and each profile has its own installation technology.
There are several general mandatory conditions:
- the cladding uses the technology of a suspended ventilated facade with simultaneous insulation of the walls;
Insulation for siding is a mandatory layer of the façade “pie” for our climate Source dekoriko.ru
- it is necessary to calculate the materials as accurately as possible so that there are no large residues left when there is “overkill” and there is no need to buy more if there is a shortage (painted panels from different batches may not have the same shades);
- must be precisely calibrated zero level at the starting strip or the first panel from the bottom - it is this that is responsible for the “simplicity” and correctness of the cladding of the entire wall;
- if the panels have a connecting groove, it should be at the bottom so that moisture does not collect in it;
- all openings and corner connections must be issued with appropriate profiles.
Video description
You can clearly see how siding work is done in the video:
Conclusion
Siding is a universal façade panel. They are able to reproduce the texture of all building materials and are suitable for any home, and decorative possibilities are limited only by the construction budget. Therefore, if you have settled on the option of finishing the facade of the house with siding, then it is better to choose the appropriate color with a designer who will help you choose best option for your home.