Bathroom ideas with shower. Shower stall in the interior of the bathroom. Small bathroom - shower stall, here's a good solution

Shower cabins have both advantages and disadvantages:

Pros Cons
In small bathrooms (for example, in Khrushchev-era apartments), a cubicle is an excellent option, which, thanks to its dimensions, will help you fit everything you need into a small space. In a cabin, unlike a bath, you cannot lie down and relax after a hard day.
IN wooden houses old floors may not withstand a full bath, so a shower is the only way out in such a situation. If there are small children living in the house, they need a bath. Daily water procedures develop children and improve their health.
The shower cabin looks laconic and modern. Perfect for a bathroom decorated in a minimalist style.
The cabin helps save water and sometimes time.

It is more difficult to care for a shower stall: you need to wash not only the tray, but also the glass partitions or doors.

A shower room is much more appropriate in a house where there are elderly people. It’s easier to get into there than into the bathroom, plus there’s the option of putting a bench. It is impossible to wash clothes or store water in the cabin.

Types of showers

The choice of shower depends on the size and features of the bathroom, as well as the financial capabilities of the owner.

Shower cabin

Also called closed box. Consists of a pallet, walls and roof. The tray is made of either plastic or acrylic, and the doors are made of clear or frosted glass. Inside, the cabin can be equipped with various additions: hydromassage, radio, lighting, Turkish bath function. A stationary shower is easy to install - only a drain hole is required.

The photo shows a box with a low tray, equipped with a mirror, a seat and a shelf.

Shower corner

This is a compact and practical design that fits in any room. The corner uses two walls, which makes it quite economical option. The model does not have an upper plane, and in apartments on the ground floor or a private house there is often no pallet. Products can be square, semicircular or multi-faceted: the choice depends on the area and capabilities of the bathroom.

The photo shows an open semicircular corner with a curtain in a country interior.

Combination bathtub and shower

This design combines the functions of a shower and a bathtub: it can be either a bowl equipped with a watering can, or a full-fledged shower box with a high tray and additional equipment. Suitable only for spacious rooms, as it takes up a lot of space. There are also showers built into niches, which are closed with hinged or sliding doors.

The photo shows a multifunctional shower cabin with a high bowl.

Homemade tile shower with glass doors

This product looks laconic, stylish, and most importantly, gives plenty of scope for imagination. You can make a shower stall yourself with a base made of concrete or brick. Plumbing communications are hidden under a concrete layer, and the foundation and floor are made with a slope to allow water to drain. The design without a threshold with a drain, which is made according to the same scheme, but without a threshold, looks even more minimalistic.

To many, porcelain tiles seem cold, but the tiles heat up quickly and maintain the temperature, so using such a shower is pleasant and comfortable.

The photo shows the bathroom in classic style, into which a shower room with a threshold fits perfectly.

Space layout

The dimensions of the bathroom are the main factor that determines the layout. The cubicle will fit perfectly into a narrow bathroom, but it will also look great in a large bathroom. The design with or without a low tray looks airy, and the glass doors seem to dissolve the shower room in space.

The photo shows a bathroom in gray tones, equipped with a cubicle with a glass hinged door.

The layout of a small room allows you to place the cubicle in the corner to save as much space as possible: this frees up space for the washing machine, sink and laundry basket.

How to arrange a room?

You should think about the design of the bathroom at the design stage. Because of high humidity the room must be provided with good ventilation.

It is also recommended to immediately decide on the style - will it be a classic interior in light colors with elegant antique furniture and fixtures or, for example, functional modern furnishings with a loft twist. Shower stalls will fit into any interior.

The photo shows a classic-style bathroom with a full-wall mirror.

As additional decor, you can use contrasting vases, carpets and curtains. A bathroom with a window can be decorated indoor plants. But it’s better not to leave hygiene products in sight, otherwise the room will seem cluttered.

The intensity of lighting depends on the size of the room. Lamps must be placed on the ceiling, in the shower area, and also near the mirror.

Finish options

As a rule, paint is used to decorate a bathroom with a shower stall, wall panels or ceramic tiles. Ceramic products of various shapes are often combined with each other: square, rectangular, “hog” and “honeycomb”.

The shower room can act as an accent, provide zoning of space, or, conversely, not stand out from the general background. This is especially true in a small room, for example, in a white bathroom, when the design fits into the decor and does not attract attention to itself. For more spacious rooms and eccentric ideas, cabins of any color are suitable.

The photo shows a black cabin with gold accent accessories.

In addition to tiles, ceramic or mirror mosaic. It is also environmentally friendly and resistant to stains, and the variety of shades allows you to create any pattern or geometric pattern and make your bathroom unique.

Small bathroom design

Choosing a shower cabin for small room, it is recommended to focus on models that occupy only one corner of the room. Wall or corner placement significantly saves space. Unlike bulky cabins with a high tray and many functions, laconic corner products or homemade cabins with a ladder they will take up minimal space.

The photo shows a small bathroom with a shower in emerald tones.

To visually expand the room, it is worth using light shades and reflective surfaces: mirrors, furniture with glossy facades, glazed tiles. Transparent (not matte!) shower doors will also help create the impression of free space.

The photo shows a small bathroom in a minimalist style with a transparent cabin.

Photo of a combined bathroom

Sometimes, in order to expand the room, a partition is removed between the bathroom and the toilet. Together with the shower stall, there is enough space for a washing machine.

The photo shows a luxurious bathroom with a shower, decorated with black tiles with a pattern and patina.

To make a bathroom with a shower look more spacious and tidy, designers recommend using a wall-hung cabinet under the sink and a wall-mounted toilet.

Photo gallery

One of the trends recent years– the bathroom should be perceived as a room. Shower enclosures, especially prefabricated ones, help create a stylish and functional interior.

Will help you come up with a bathroom design photo, small size A bathroom is a rather complex room to decorate, but it can also be made stylish and functional. Examples finished interiors will irreplaceable assistants: they can be inspired, partially or completely borrowed.

Bathroom interior options with shower

The design of a bathroom in Khrushchev must obey certain rules. Successful interior always based on color, light and furniture arrangement. And only with the correct combination of all components can you get a decent result.

Play of light and color in a small bathroom

Design specialists and lovers of interiors that please the eye never tire of talking about the role of color schemes. Indeed, correctly selected and combined shades literally transform the room. To do right choice, it is worth remembering the basic rules for the influence of color on the visual perception of the size and proportions of a room:

  1. Cool tones always push boundaries. A small bathroom will look more spacious. But cool shades don't always look flattering. For example, pale blues and pale greens are often reminiscent of Soviet design. An excellent alternative would be shades that have become widespread recently: mint, emerald, cool gray.
  2. Warm shades make a room smaller. But they help to smooth out the dampness and coolness of the bathroom a little. To prevent the effect of reducing space from being too striking, it is better to choose moderately active tones. Vanilla, warm beige - great solution. Bright tones, like tangerine, will put pressure on the psyche.
  3. White - universal color, which can be used in absolutely any room, be it a bathroom in a Khrushchev building or a penthouse. This color is always associated with cleanliness, freshness and spaciousness. And, contrary to popular belief, dirt on it is much less visible than on black or chocolate. White can be used throughout or as accents.
  4. Combining colors will help make a small bathroom visually larger. A gradient from light (at the ceiling) to dark (at the floor) tone will “raise” the ceiling. A contrasting horizontal stripe will make the room more spacious.

And don't forget about the influence of light. In a typical apartment bathroom there is no natural light source, and sun rays always make the room more spacious and the atmosphere in it more inviting - what to do? Replace natural light to artificial. There should be a lot of lamps. Minimum ceiling and a pair of mirrors on both sides. If desired, spotlights can be added to the cabinets.

How to choose and install a shower cabin. Video

Lots of furniture - not enough space

Of course, every owner wants modest square meters Everything you needed fit in, and at the same time the design of the small bathroom was stylish and original. You can get as close to the goal as possible with the help of rational distribution of area.

The easiest way to enlarge a bathroom is to create a combined bathroom.

Then the missing square meters can be “stealed” from the toilet. If this option is not suitable, you will have to look for alternative ways.

Increase quantity free space can be done in several ways:

  1. Give up the bath in favor of a shower. A washing machine or laundry basket will fit into the vacant space.
  2. Make all cabinets narrow and tall or even wall-mounted. A typical small bathroom usually cannot boast of an abundance of storage space, but in vain. Shallow wall cabinets not only at the mirror, but along the entire perimeter of the room will solve the problem of lack of space. And you can install a pencil case in a narrow partition.
  3. Select functional models. It is better to abandon the “tulip” type sink; perhaps it has its advantages, but an additional cabinet in a small bathroom is much more important.
  4. Furniture facades match the color of the walls. This trick will make a room of 5 square meters visually larger. Get a spacious bathroom.
  5. Ergonomic shapes. Furniture and plumbing fixtures that follow each other’s shapes will help save precious centimeters. In this case, there will be no need to leave non-functional gaps. In a small bathroom with an area of ​​up to 5 square meters, such areas will significantly save space.

When arranging furniture and plumbing fixtures in a cramped bathroom, you should be guided by the “desirable-necessary” principle. It is better to move all elements that can be discarded outside the room, and choose the necessary furniture of modest size and regular shape. And then the design of a small bathroom will be stylish and functional. And the miniature size will give the renovated bathroom in the Khrushchev an indescribable charm. The main thing is not to clutter an already cramped room.

But not all recommendations of specialists in the design of a 3 sq. m bathroom can be implemented by an amateur. You can focus on your feelings or remember the win-win options. And it doesn’t matter on what area these ideas will be recreated.

  1. Mirrors always and everywhere expand space. Don't be afraid of this material. With its help, you can create a masterpiece on five square meters.
  2. A large drawing makes the room smaller. Large flowers or geometric shapes Suitable only for spacious bathrooms. For the design of a 3 sq. m bathroom, they are too intrusive.
  3. The horizontal layout of rectangular tiles always expands the space.

Decorating a bathroom with an area of ​​about three or 5 square meters is extremely difficult. But nothing is impossible. Imagination, desire and useful tips will help make the design of a 3 sq. m or 5 sq. m bathroom complete and original.

How to decorate a bathroom with a shower installed in it? This question often arises both among owners of private houses and among residents of standard city apartments. But in your own home, bathrooms are usually spacious, and therefore arranging all the necessary accessories in them is much easier than in a cramped combined bathroom, as well as coming up with a design and finishing. Unfortunately, on the Internet you can most often find sketches and designs for premises, the vast area of ​​which remains a pipe dream for most apartment owners.

A small one with a shower cabin, the design for which is much more difficult to come up with, is almost not discussed. But through this room there are also various engineering communications, requiring a certain camouflage, which also complicates the registration process.

It is about bathrooms with a shower stall, organized in small areas, about the possible difficulties of their design, taking into account certain nuances, that will be discussed in this publication.

Preparatory work

In order for the finished bathroom, fully equipped with all the necessary accessories and finished, to look as originally intended by the owners, preparatory measures must be carried out that will streamline all further stages of work.

Drafting

First of all, a project is drawn up for the bathroom, in which the bath will be replaced with a shower. Usually this process aims to make the room more spacious or combine the bathroom with the toilet, so that, if possible, even expand the kitchen or hallway, depending on the layout of the apartment.

The main task of design is to be able to fit everything you need into a limited area

When developing a preliminary project, you need to remember that it is quite possible that adjustments will have to be made to it in the future after all communication pipes are opened. Masking boxes may be added to the sketch, since, depending on the project, there may be a need to relocate and extend water and sewer pipes.

Preparing the premises

Having thought through and completed on paper an approximate “layout” of the location of all items, you can move on to the next stage of work. It can be carried out in different ways:

  • Removing all old bathroom accessories.
  • Dismantling the partition between the bathroom and toilet, if it is decided to combine them into one room. This process should be carried out only after agreement with regulatory authorities.

Next, after dismantling all the elements, you need to get rid of the debris and thoroughly clean the walls and floor from dust. If the walls are tiled or finished with other decorative materials, they also need to be removed immediately.

If it is decided not to move the toilet, but to leave it in its original place, then it is recommended to dismantle it last. If you can live without a bathroom for some time, then it will be much more difficult to do without a toilet.

Planning and installation of utilities

When the room is free of everything superfluous and unnecessary, it becomes possible to freely inspect the condition of the old pipes and, based on the bathroom design, think about how best to lay out the pipes by making the appropriate drawing.

If the renovation is carried out only in the bathroom, and sewer riser remains in the toilet, it is recommended to hide both the water supply and drainage pipes in the walls. To do this, grooves are cut into which communications are installed - this will also help save some of the space.


In addition, it is recommended to install at least one socket in the bathroom, since very often this element is not enough to turn on a hairdryer. It may also be needed for washing machine, if it is planned to be installed in this room. The electrical cable also needs to be hidden in the wall, first enclosed in a corrugated tube, and the socket itself must be purchased with a special one, with increased moisture protection.

After all the pipes and cables have been installed, the grooves are sealed with cement-sand or gypsum plaster mortar.


If the bathroom is combined, then all water supply and sewerage communications are usually combined and compactly mounted near the central sewer riser. It will still not be possible to move it, so the entire communication node can be disguised at once with a plasterboard box.


Special attention focuses on the method of connecting the shower stall itself to the sewer riser. Some pallets have a very low drain pipe, so to connect it to the waste pipe you will have to either bury it in the floor or raise the booth itself to required height. The pallet is raised using special adjustable legs, or a brick pedestal is laid out on which the shower stall is installed.


If the bathroom is combined and a shower cabin is installed instead of a bathtub, then some prefer not to install a box, which can spoil the interior design, but to install a masking wall made of plasterboard with an elegant shutter door. This option is especially suitable when, when combining a bathroom and toilet, the central sewer pipe ends up in the middle of the rear wall of the room.


It is necessary to leave an inspection window so that utility workers have free access to pipes, valves and meters. Well, an elegant door will cover the entire interweaving of pipes, so the door should be selected last, to match all the existing finishing.

It is also necessary to take into account that the inspection window must open freely, which means it cannot be blocked by any bathroom accessory.

In order to create such a wall or box, you will need to purchase a special galvanized metal profile and moisture-resistant drywall.

It is recommended that before starting the installation of the frame, you need to think carefully, and best of all, even draw the location of each of its elements so that the structure is strong, and the window for access to the pipes is of sufficient size and located in a convenient location.

Waterproofing bathroom surfaces

Even before installing the masking box, after sealing the grooves and removing debris from the room, the floor must be covered with waterproofing. This must be done especially carefully around all pipes of any purpose passing through the ceilings (feed-through sleeves).


When waterproofing, pay special attention to corners and pipe passages

It is very important to waterproof the joints of walls and floors well, covering the walls with the composition to a height of no less than 120÷150 mm, and in places where plumbing fixtures are installed, even above the level of connection points (plumbing “sockets”). In these places, a special sealing tape must be glued, and only after these strips have dried, it is necessary to cover the entire surface of the floor with a waterproofing compound.


The future bathroom is completely waterproofed

Waterproofing will save apartment owners from unnecessary troubles if emergency situation, from which, unfortunately, it is impossible to completely insure yourself. Water spilled on the floor surface will not flow to neighbors living on the lower floors. To prevent water from leaving the bathroom, the door must be equipped with a threshold, which also needs to be waterproofed.

Waterproofing the bathroom floor is the most important stage of renovation!

There are several types of materials used for these purposes. A special publication on our portal will help you understand their diversity, choose the most optimal one and become familiar with the main technological methods of implementation.

How to choose a shower stall

Having prepared the room for the installation of all the necessary accessories, you can start choosing the purchase of a shower stall. In order not to make a mistake with the dimensions, you must first take accurate measurements from the area where the cabin is planned to be installed, and accurately determine the area that can be allocated for it.

Moreover, if you plan to purchase a booth, even if it has an almost triangular shape in plan with a small semicircular protrusion, then you should still take a square as a basis. The model you like in the store should be measured there from all sides, so that at home you can transfer these dimensions to the place for installing the cabin.

Prices for River shower enclosure

River shower corner

Currently, the assortment of specialty stores offers a variety of shower stalls - from the simplest to those equipped with numerous additional options. Naturally, their prices also vary greatly. In addition, they can be different types, shapes made from various materials.

Shower stalls are mainly divided into two types based on their basic design - open and closed. What they are should be of interest first of all.

Open showers

Open showers are those that are limited by side walls but do not have a ceiling.

Walls in booths open models there may be two or three, they can be installed in the front of the structure and against the walls. In addition, there are options that have only front walls, which are attached to a frame mounted on the wall.

Such cabin models are considered economy class products, since they are mainly equipped only basic set functions. They are often also called “shower enclosures”. Cabins without rear walls, require enhanced sealing at the junction of the pallet with the wall, the same as during installation regular bath.


The absence of some additional functions is also explained by the fact that they will be useless in a structure of this type, since it does not have a ceiling, and, for example, “aromatherapy” or “sauna” will be effective only in an enclosed space.

Open booths are produced that can be installed without a pallet, but such models should still not be installed in high-rise apartments, since even if high-quality waterproofing is done, there is a possibility of flooding in the lower floor apartments.

In addition, the floor will have to be raised with a screed by at least 70 ÷ 80 mm in order to lay the waste pipe in this layer and mount the drain. Such a screed, even without taking into account it’s all the same necessary finishing floor, will significantly increase the weight of the floor structure, which can be extremely dangerous, especially for old houses.

It is not advisable to purchase a booth with a tray that has low sides, as this can also lead to flooding of the lower floors.


The only way to correct the situation (except for the screed) is to install the pallet in a well-waterproofed podium, which is usually made of brick. It is already possible to hide the drain pipe in it and lead it to the sewer, observing the obligatory slope of 2 - 3 degrees.

It is better to use such options for bathrooms of private houses, when the water from the pan is immediately drained into the sewer pipe.

Closed cabins

Closed type showers are otherwise called boxes. They differ from shower enclosures in that they have a tray, walls on all sides and a roof. Such cubicle cabins can be equipped with only the main function - a shower, or be multifunctional.


They are given a variety of shapes - in plan they can be a rectangle, circle, semicircle, triangle, etc. Their dimensions along the perimeter or diameter depend on the parameters of the pallets, which, in turn, can also differ in height and material of manufacture.

Bath with shower

Another option that will take up not much more space in the room than a regular bathtub. This is a whole complex that allows you to lie in hot water and relax or invigorate with a shower.

“Symbiosis” of bath and shower

This compact accessory is produced in different variations, and can be equipped only with a shower or have many other functions, including original lighting and even the ability to listen to music.

Sometimes such a cabin can have a rectangular shape, like a regular bath. There are also corner options, but they will require more space than a standard accessory.

Homemade shower cabins

Such a shower cabin can be built by the apartment owner himself, but it would still be better to purchase a ready-made shower tray. Of course, you can fold it yourself, but you shouldn’t load the ceiling - it’s enough to make a podium around the perimeter from brick.

Two walls or one, as planned by the designer, can be made of brick and covered with tiles or built from glass blocks.

The size of a homemade shower stall will depend on which tray is suitable for a particular room.

On sale you can find glass blocks of different colors and textured patterns, so you can choose them to suit every taste. These elements are also quite easy to install - the main thing is to constantly monitor the verticality of the masonry.

All that’s left to do is build a partition

Installing walls in a bathroom is almost the same as erecting partitions from different materials, including glass blocks. How - read in a special publication of the portal.

Shower trays

As mentioned above, the tray determines the shape of the shower stall. It can be square, rectangular, triangular, oval, or have an asymmetrical shape. Another defining parameter of this element in the cabin design is depth. Pallets can be deep - up to 450 mm, shallow - from 100 to 180 mm, and flat, only 30 mm deep.


Typically, pallets are equipped with an anti-slip textured coating. They are selected according to color, which should be in perfect harmony with all the accessories of the cabin or with color scheme interior design of walls, floors and ceilings.

Pallets are made from different materials - it can be cast iron, steel or acrylic.

  • Cast iron enameled pallets are highly reliable and can be installed on a steel frame or a brick podium. They are perfect for homemade shower stalls.

  • Steel pallets are also coated with enamel, but they are less durable because they have thin walls. When installing them on a frame or an empty podium inside while taking a shower, the sound of falling water will be very loud. Therefore, in such cases it is recommended to coat the back side of the pallet polyurethane foam, which will create a noise-absorbing layer. Steel pallets are less durable than cast iron, but if handled carefully they will last at least 10–12 years.

Steel pallets are inexpensive and quite practical with careful care
  • Acrylic trays have recently become the most popular, as this material is highly hygienic, pleasant and quite warm to the touch. The acrylic tray is lightweight and quite durable if installed properly. If scratches appear on it, they can be easily rubbed off with fine-grained sandpaper.

The shallow tray is mounted in special frame. If this option is chosen for a homemade shower stall, then a podium must be installed for it, exactly according to the shape of the bottom.

Some trays can also be used as a shallow bathtub. In such varieties it will be necessary to install a “drain-overflow” system.

  • You can also build a homemade pallet if it is small around the perimeter and in height, that is, it will not overload the ceiling. For cladding it is recommended to use mosaic tiles, as it will create a non-slip surface.

When embedding a sewer pipe into a homemade pan, you must remember that it must be located at a slope of at least 2 ÷ 3 degrees.

Shower walls and doors

These shower enclosure guards are made from impact-resistant glass or acrylic. Acrylic walls and doors can have varying degrees of transparency and vary in color, but glass is easier to clean, since water does not linger on it and quickly drains without leaving marks. In addition, it does not become cloudy over time, unlike clear acrylic panels.

Doors in the shower can be hinged or sliding, consisting of two or four leaves. Sliding type doors have a higher degree of tightness in the closed position. The doors move using rollers and do not require extra space to open them.

Prices for popular shower cabins

When choosing a stall with a hinged door design, you will need to think in advance about installing other accessories in the bathroom, since they should not interfere with the doors, otherwise they can be accidentally damaged.

Additional functions of shower cabins

A few words need to be said about the additional functions of shower cabins, since some of them are also reflected in the interior design.

  • Backlight. The finished shower cabin can be equipped with lighting, which is carried out using special waterproof lighting devices. This feature allows you to shower without turning on the main lighting in the bathroom. In addition, specially designed lighting has a therapeutic effect on the human condition (in medicine this concept is called chromotherapy).

In this case, the lighting can come not only from the walls and ceiling of the cabin, but also the streams of water coming out of the shower head are colored. Colors can be changed using the remote control, depending on your mood and which body system should be affected.


  • Aromatherapy. This function allows you to fill the cabin with aromas with healing effects. To achieve this effect, steam and water are passed through a chamber containing an aromatic balm. The aromatherapy function can only be installed in closed cabins, otherwise the desired effect cannot be achieved.
  • Tropical shower. This function simulates heavy rain, and this effect is achieved using a specially installed nozzle in the ceiling of the cabin. “Tropical shower” relaxes muscles and nervous system, so it is recommended to take it before bed.

The "tropical shower" nozzle is usually mounted in the roof of the shower stall
  • Contrast shower. This function has the opposite direction: if summer shower relaxes, then a contrasting one will give vigor and increase efficiency. During the procedures, an alternating supply of cold and hot water within a predetermined temperature range.
  • Hydromassage. Hydromassage devices can be horizontal and vertical. A horizontal hydromassage can be installed in a deep tray, which is essentially a whirlpool bath.

Vertical hydromassage is the one for which nozzles supplying air and water flows are installed on the side walls of the cabin. The quality and variety of available massage functions depends on the number and location of nozzles. Hydromassage can improve well-being, normalize blood circulation and have a positive effect on intestinal function.

  • Turkish bath. If this function is provided in the booth, then inside it you can create a special microclimate with 100% humidity at a temperature of 40÷60 degrees. This option is achieved using a steam generator that generates and dissipates steam inside the cabin.

It should be noted that in order to achieve the effect of the hydromassage function and create the microclimate of the Turkish bath, the pressure in water pipes should be no less than 2÷3 Bar.

In addition to these functions, shower cabins can also be equipped with voice control, music, and dispensers. detergents and much more.

When purchasing a shower stall with an abundance of different functions, you must immediately expect high energy consumption. Connecting the cabin to electricity must be done with a separate cable, which must be grounded, so you should invite a specialist for installation and connection.

Is it possible to install a shower stall yourself?

Practice shows that this is a rather difficult, but still quite feasible task. Advice on this is given in an article on our portal specifically dedicated to this issue.

Video: variety of shower cabin models

Bathroom finishing

The surfaces of a bathroom with a shower stall installed in it are most often tiled with ceramic tiles, since this material is ideal for this room. However, there are other options.

Wall decoration with plastic panels


The range of PVC panels is very diverse

They are perfect for decorating walls in the bathroom; they can be found in a large variety in hardware stores. An important condition for their installation is the maximum possible evenness of the wall surfaces. This is necessary especially if the bathroom space is very small and installation will have to be done using glue.

The advantage of choosing plastic panels is that they are more affordable and any novice craftsman can install them, and this is especially important for saving money, of which quite a lot is spent during repairs.

An important condition for the quality of installation of this material is the tight connection of the panels to each other and careful sealing of all joints.

The most “budget” option for wall decoration in the bathroom is PVC panels

Upon purchase quality panels and following the technology of their installation, you will get a beautiful, durable, hygienic coating that will last for many years. How to do it yourself - in a special publication on our portal.

“Classic” wall decoration – ceramic tiles

Cladding with ceramic tiles is a more labor-intensive job, since you need to master the technology of laying it. Therefore, in order for the result to be impeccable, it is often necessary to invite a master veneerer, and his work will not be cheap. It is especially important to carry out the process according to all the rules if you plan to decorate the walls with tiles with an ornament or fit panels into the main masonry.


If you still decide to try your hand at this work, then the walls will need to be leveled to perfection. This task can be dealt with by using sheets of plasterboard, which are mounted on the wall using construction equipment. glue mixture. Such leveling is possible if the walls do not have excessively large differences. For surfaces in the bathroom, only moisture-resistant plasterboard with green front surface.

Use drywall to level the walls!

Ideally smooth gypsum boards will level the surface and become a good basis for further finishing, including ceramic tile cladding. In conditions limited space bathroom is more advantageous, directly to the surface. How this is done is in a separate article on the portal.

Floor finishing

The floor in the bathroom can be tiled with ceramic tiles, covered with a moisture-resistant laminate, or decorated with a self-leveling epoxy coating.


Ceramic tiles on the floor must also be laid skillfully, otherwise level differences may form. This will not look aesthetically pleasing, and in addition, it can lead to injuries, since it is easy to trip over or scratch your foot on the protruding tiles.

If the shower tray has low sides, then flooring made only from ceramic tiles.

Tiling the floor - how difficult is it?

The process cannot be called simple, but if you strictly follow all the technological recommendations, you can do it yourself. To decide on it, it is recommended to study the special publication of our portal.

  • The floor can be decorated with laminate if a closed shower stall with high tray walls is installed. With this option, the risk of water overflowing and hitting the floor surface will be much lower.

Laminate has an advantage over ceramic tiles in that its surface is much warmer and less traumatic, which is very important when getting out of the shower.

The “disadvantage” of this coating can be called more short term its operation. But if you purchase material with a higher resistance class, lay and use it carefully, and do not walk on such a floor in shoes with hard soles, then the laminated coating can last quite a long time.


  • A self-leveling epoxy or polymer floor is suitable for a bathroom that has a shower stall with any tray, since it performs two functions at once - both waterproofing and decorative coating. The disadvantage of this type of floor is that to install it you will have to invite a professional, whose work will be quite expensive. And the set of materials for such filling itself will cost a “good” amount.

A modern approach to finishing a bathroom - self-leveling epoxy flooring

A self-leveling polymer floor with patterns, fillers or even a three-dimensional design will look very advantageous in the bathroom. In addition, the problem of waterproofing is immediately completely solved. To learn more about the technology and evaluate your capabilities, read the special publication of the portal.

Prices for the range of floor tiles

Floor tiles

Bathroom ceiling

The ceiling in the bathroom is decorated using different materials - these can be plastic panels, suspended ceiling, slab, painted, decorated with polystyrene foam tiles, made of plasterboard suspended structure and others.


The most important element bathroom interior - beautifully decorated ceiling

The ceiling in the bathroom - a special approach

Each type of ceiling finish has its own advantages and disadvantages, both during installation and during operation. To find out, read the special article on the portal.

Design options for bathrooms with shower

To imagine what they might look like different options shower cabins in the interior of small bathrooms standard apartments, it is proposed to consider several possible design solutions more details.

Option No. 1

In this case, the combined bathroom is arranged in a room whose area is usually reserved only for the bathroom.

Compact location of all necessary elements, contributed to the fact that a fairly large area of ​​the room remained free. For this purpose, a simple compact shower cabin without additional functions with a medium-depth tray was chosen, so it does not weigh down the interior. Its matte-transparent walls, as well as a mirror that reflects the opposite wall, help expand the space.

For the walls and floor, two types of light-colored tiles were used, which harmonize perfectly with each other. As decorative decoration A ceramic narrow border with an ornament is used that includes both colors used in the interior, which simultaneously unites and separates them.

Light colors and floor tiles laid diagonally, visually expands the room.

To prevent the room from appearing narrow due to the height of the ceiling, white tiles are laid not to the entire height of the wall, but in the form of a wide insert, which is framed by a narrow border of ornamental tiles. The upper part of the walls is decorated with a stripe of the same color as bottom part interior - it seems to make the ceiling lower, and the room does not seem too narrow. Combining color between floor planes and panels also expands the space.

The central sewer pipe has a shelf design that is not only functional, but also fits perfectly into the design.

We can say about this interior that the designer thought through every detail of its design - from the color scheme to the placement of all accessories. Moreover, a space has been prudently left where, if desired, the apartment owner can easily install a washing machine and secure a towel rack.

Option No. 2

In this case, free space in the bathroom appeared due to the combination of two rooms - the bathroom and the toilet. When demolishing the wall between these rooms, part of it was prudently preserved to convert it into a medium-height partition separating the bath and toilet areas. The compactness of this element makes it almost invisible in the interior; moreover, its preservation made it possible to preserve the location of the heated towel rail, which was simply replaced with a smaller version.


The interior uses two shades of the same warm color, which makes the room lighter, and the white ceiling echoes the interior elements, which look like light spots against the background of a dark orange tone. The border separating the color zones is a kind of “highlight” that adds aesthetics to the design and emphasizes the panel area.

Such a color scheme, although thought out in warm sunny tones, still requires more intense lighting, since the dark orange tint of the panels and floor does not support it, but rather absorbs it. Therefore, only the white ceiling and accessories located on a dark background look like light spots.

For this bathroom, a compact, simple shower cabin without additional functions with transparent walls was chosen, which contributes to the effect of expanding the space, and the rounded shape of its doors softens the lines of the interior. Smooth lines and warm colors are capable of setting a person up for relaxation, which is good for the evening hours, when water procedures are taken before bed, but does not at all contribute to the mood for increased performance.

It should be noted that this design is not well thought out color scheme, since the room requires additional lighting. The arrangement of all interior elements is successful, quite compact and occupies a small area. The rest of the room can be used to install other traditional bathroom items and appliances.

Option #3

The interior in this case is made in cool colors. Although the room is quite bright and does not require additional lighting, the chosen gray and white finish looks rather dull and “official”. There is thoughtful neatness in the interior, thanks to the rational arrangement of all accessories, however, it seems to be absent home comfort. If selected facing material of this shade and the room is already decorated in a similar style, then a rug of a bright warm color placed on the floor and a colored panel on the wall will help correct the situation. These details will add warmth, comfort and light to a dull, monochromatic interior.


The layout of the room is successful, but the design style is somewhat “cold”

TO positive aspects This design can be attributed to the horizontal arrangement of rectangular tiles on the walls and diagonal ones on the floor provided by the designer. This solution visually expands the space and makes the room more voluminous.

In the option under consideration, a shower cabin has been chosen, which has a massive shape and a greater number of functions. It is the center of the interior and the first one, upon entering the room, attracts attention, and the remaining elements seem to support its presence, filling the space.

In general, the interior is decorated with professional precision and calculation. The only drawback is its monotony and coldness of color.

Option No. 4

This small bathroom is located in small apartment, the so-called “Khrushchev”. Having such a small room, you have to think through the installation of each of the elements with special care, and the shower cabin with its compactness can be called the only rational solution.


Managed to fit literally “on the spot”

IN this interior, despite its small area, the sewer line and pipes running next to it are perfectly camouflaged with the help of a built-in box. Moreover, the box fits perfectly into the design, without standing out and, it would seem, not taking up space at all. The shower stall successfully found its place between the wall and the protruding part of the box. Although it does not look compact in a small room, it looks very aesthetically pleasing and neat. The semi-circular sliding doors of the cabin have frosted glass, and this additionally contributes to the visual expansion of the space, since they close the corner of the room in which the booth is installed, thereby blurring the boundary of the wall.

The room is decorated in light colors, and tiles the color of baked milk are used. This approach, combined with the white color of all accessories, enhances the lighting of the room.

In the interior shown, the area is used as rationally as possible with a well-chosen color and arrangement of all the elements necessary for this room.

Option No. 5

Another room that seems to make it impossible to place in it everything necessary for hygiene procedures. However, the skillful designer did an excellent job here too, choosing compact accessories and successfully placing them in the space.


There was even space in the room for a pencil case, a washing machine and a mobile trolley table, on which detergents and towels were conveniently placed.

Moreover, a shower cabin was chosen for this bathroom, which has a deep tray that can be used almost like a full-fledged bathtub. In addition, the cabin is equipped additional functions, as well as a seat, which makes holding water procedures as comfortable as possible.

The walls and floors were decorated using ceramic tiles contrasting color. Cladding material is used for the panels dark blue, and the top of the wall is made white, which makes a small room without natural light, quite light. A narrow border, separating two colors and having them in its ornament, softens the sharp transition from the dark lower area of ​​the wall to its upper, light part.

We can say about this interior that it contains everything necessary for receiving procedures. Moreover, despite small space, there is quite a lot of space left for free passage to any of the accessories.

In conclusion, I would like to note that in order for the interior created in the bathroom to be used for as long as possible, it is very important to carry out preliminary preparation of the room, as well as choose the right accessories for it. Having followed all the recommendations for arranging this room, the owners will receive a comfortable bathroom that will last for decades.

At the end of the publication - another interesting option design design bathroom with installation of a shower stall.

Video: bathroom interior with shower

Small apartments in modern cities often have cramped bathrooms, so small in size that it seems impossible to fit plumbing equipment and necessary communications into them. Look at the photo - how well the shower cabin fits into the interior of a tiny bathroom. This invention became a way out for registration. This article is all about bathroom design with.

Choosing a shower for a small bathroom

By giving preference to a shower stall, many believe that this way they can save space, this is especially true for small rooms. But often the bathtub has the same dimensions as the shower stall, and the latter, due to its large height, looks very voluminous and bulky. When choosing a shower for a small bathroom, you should follow certain rules:


Options for placing shower cabins

It is worth recognizing that there are very few options for placing a shower in small bathrooms:

  • The most frequently chosen solution is equipment installation in the corner of the room. This option is acceptable in rooms of regular shape, closer to a square. In the photo you can see several options for installing shower cabins in small square-shaped rooms.

Corner shower cubicle

  • Shower installation allowed in protrusions and recesses, if any in the bathroom. When placing a shower, gaps should be provided between the plumbing fixtures, furniture and the stall, which are at least 0.15 m.
  • The shower should not block access to washing machine, should not interfere with the opening of cabinet doors and bedside tables.

We install a shower stall in accordance with the existing bathroom layout. It is necessary to plan the arrangement of plumbing equipment and furniture in the bathroom, especially in a small room, taking into account the location front door. The attached photos show how the necessary equipment should be correctly positioned.

The location of the shower stall in a square bathroom

  • When the door is located in the middle square room, the shower cabin can be installed in any corner.
  • If the room is rectangular with an entrance in the middle, the shower stall is installed along one of the long walls.
  • If the doors are located in the corners of the room, then the shower stall should be installed in the opposite corner.
  • The cut corner of the bathroom will be balanced by installing a shower stall in it.
  • If the door in the bathroom is “moved” from the center to the side, then the showers will look most harmonious in the far corners or along the far wall.

Calculate the place so that it is convenient to leave the shower room

How does the color of a shower stall affect the harmonious design of a bathroom?

The influence of the color of shower equipment on creating an overall harmonious space is enormous. Light color shower stall: white, ivory, pale blue - can visually expand the room, especially when all bathroom equipment is combined in a single style solution.

Attention! Black, blue, steel shower stalls look massive, bulky and require a large amount of free space. For small rooms it is not recommended to choose such colors of plumbing equipment.

Subtleties and tricks when designing a bathroom

In a cramped bathroom, the design needs to be thought through to the smallest detail; many aspects matter, even the quality of the rug. All accessories for a small bathroom should be selected according to special rules:

  • Mirrors and the mirror surface of the ceiling visually expand the room. Be sure to purchase a mirror and hang it on the opposite wall from the shower stall.

  • A separate conversation about rugs - they visually narrow the space. It is not necessary to cover the bathroom floor with carpets and rugs, especially shaggy ones. In addition, dust accumulates in rugs and serves as a source for the development of mold and mildew.
  • Minimalism in the decoration of small bathrooms with showers - here best option when choosing a style. The main thing here is not to overdo it - you should provide places for storing household chemicals, washing powders, toothpaste, toilet paper and other bathroom accessories. Cabinets or shelves can be placed on the sides of the shower stall, providing the necessary breaks between the equipment.

Avoid large quantity decorative elements in small bathrooms

  • The economic aspect is also worth considering when buying a shower cabin - cheap models will not last long, and they are not reliable. You should purchase shower stalls from well-known companies that have proven themselves positively.

Taking into account simple rules, make a bathroom with a shower stall, multifunctional and comfortable room is not particularly difficult even for inexperienced designers.

Installing a shower stall in a small bathroom: video

Shower cabin for a small bathroom: photo






Taking water procedures should be comfortable, otherwise they will not bring the desired effect. Many of us prefer to take a shower in the morning and evening - it energizes us in the morning and helps relieve tension in the evening after an active, eventful day. With this choice, it makes sense to abandon the traditional bathtub, where you have to worry about splashes flying onto the floor or a slippery bottom that threatens to fall, in favor of a more advanced plumbing device. This is a completely new level of safety, and the design of a bathroom with a shower - which is what we will talk about later - looks much more interesting and modern.

What are the advantages of such plumbing:

  1. Multifunctionality, the ability to choose types of water procedures. If in an ordinary bath there are few bathing options, then shower cabins, especially hydroboxes, combine the functions massage room, spa salon and bathhouse.
  2. Compact sizes. The parameters of the smallest shower cabin are 76x76 cm. It can save space even in bathrooms built in Khrushchev, freeing up space for a washing machine or storage sections.
  3. Low water consumption compared to a standard bath.
  4. Varied design. A bathroom with a shower can be decorated in any style, even classic - modern models can easily “adapt” to the desired image. To see this, just look at the photos below:

Tip: Bathrooms in exotic style It is better to equip it with a stationary shower corner, which provides wider decorative possibilities. Its opening, if necessary, is designed in the form of an arch, a portal, and so on.

Photos with the most striking examples of showers in non-standard bathrooms.

Bathroom design with shower, what to consider

When choosing a model of a plumbing fixture, they are guided by the style features and size of the room.

  1. For a small bathroom, open-type shower cabins, rectangular or corner, are suitable. The latter will become the best option in Khrushchev-type houses.
  2. Volumetric hydroboxes are installed in spacious rooms. One of the important advantages of the design is complete insulation from external environment. Thanks to this, the air humidity in the bathroom is reduced, which makes it possible to use furniture from natural wood, and decorate the walls not only with tiles, but also with wallpaper or fresco painting.

Such techniques are indispensable when we create a classic bathroom interior with a shower, otherwise it is difficult to achieve the feeling of luxury and elitism that is characteristic of this style.

If you want to make your plumbing fixtures invisible, as if dissolving in air, you should pay attention to shower enclosures without a tray with glass door or walls. They may have different sizes and configuration, fitting perfectly into the space.

Despite the stylistic “loyalty”, shower cabins look most organic in modern interiors and this must be taken into account. In the photo: the trends that are most relevant today: minimalism, modernism and eclecticism.

Shower corner - device features

For all its advantages, a fully enclosed cabin leaves little room for maneuver, which is sometimes necessary to create a functional and ergonomic space.

For bathrooms with a small area or a complex configuration, it is more practical to choose a shower enclosure - a structure that is attached directly to the walls of the room and does not have a roof. The tray for such cabins can be factory-made or home-made, equipped at the installation site. In the second case, the cabin will not be limited standard sizes, which will allow it to optimally fit into the existing layout.

Pros and cons of a bathroom with a shower corner

Advantages:

  • You can choose a very compact model and increase the free space.
  • The shower cabin in the bathroom will not disrupt the overall style, since it does not have its own design.
  • Open models are convenient for children and the elderly.
  • Repairs will not require large financial costs, installation is quick and easy.
  • The device does not require special care.

Flaws:

  • Limited functionality. A rain shower or Finnish sauna is not available in these models.
  • The design of the shower is stationary and, once installed, it cannot be moved, unlike a hydrobox.
  • There may be problems with waterproofing and drainage in models without a tray.

Attention: when installing the cabin directly on the floor, you will need to dismantle the existing covering down to the concrete slab, and then pour a new base with several layers of waterproofing, installing a drain ladder into it. The shower floor is made with a slight slope so that the water does not spread throughout the room, but immediately goes into the drain. For cladding, choose non-slip tiles, or additionally lay a rubber mat.

Different types of open cabins. Characteristics with photo

This is what it looks like bathroom design with shower corner rectangular shape. The structure is installed between two walls or attached to one of them. On photo Below you can clearly see the features of the open shower.

Photo bathrooms with corner shower. Such models occupy a minimum of space and are indispensable in small bathrooms.

These photos show the design of a bathroom with a shower tray. If you decide to purchase a ready-made cabin base from the manufacturer, rather than install it yourself, you should consider several key points:

  1. Acrylic is recognized as the best material for pallets - it is inexpensive, aesthetic, durable and strong. With a properly made base, such a device will last for many years without losing its performance. Ceramic and enameled steel trays are also good, although they have fewer advantages.
  1. A shower base measuring 80x80cm is considered optimal for small spaces; it is comfortable for people of average build.
  1. Pallets are produced with different heights sides - from 4 to 45 cm. The deepest models can be used as baby baths.

Spacious bathrooms are not a reason to give up a shower corner, because it “gets along” perfectly with a traditional bathroom. Isn't it true, they look harmonious together in the selection photo below? Such a duet is also practical: if you want to relax in aromatic foam and celebrate at your leisure, we have a bath at your disposal, and when you need to quickly freshen up and put yourself in order, a shower.

High comfort of hydrobox

A hydromassage shower box is a multifunctional device that gives ample opportunities healing and relaxation. After its installation, owners will not have to worry about technical issues: collecting water, draining, switching to different modes is carried out automatically.

Hydrobox is an at-home spa that allows you to:

  • take a steam bath and sauna
  • take aroma and chromotherapy sessions
  • do inhalations and therapeutic massage
  • pamper yourself with exotic treatments like a tropical shower or hammam.

In addition, the closed box is equipped with many auxiliary devices that make staying in it even more comfortable. These are radio, telephony, touch control panel, compartments for detergents, lighting, and so on.

Shower cabins of this type are good for everyone, except for their size - even the most compact of them are not suitable for a small bathroom. Perhaps the prices will seem huge to some, although today there are many affordable models.

It is better to make the design of a bathroom with a shower box neutral, then the impressive device will easily turn into the main accent. The preferred styles are modern, hi-tech or loft, although the installation is also used in classic interiors.

It’s better to imagine what a bathroom with a hydrobox will look like by looking at these photos:

Shower cabins are a worthy alternative, and sometimes a necessary replacement for a conventional bath. Their diversity makes it possible to choose the best option for each specific room. Thanks to the shower, the bathroom will acquire a stylish, elegant look, and taking care of personal hygiene will become much easier and more enjoyable.