Polyurethane foam is a unique building material that is widely used for installation, sealing of structures and increasing their thermal insulation. Lovers of garden decorations have expanded the scope of application of this building material. Garden figures from polyurethane foam Every owner can easily do it with his own hands country house or a summer cottage. In this article you can see photos of finished crafts, as well as popular sculptures made from polyurethane foam.
1. Light weight.
2. Ease of use (applied to any surface, easy to cut).
3. The ability to make crafts of any size.
4. The finished product is not affected by precipitation and temperature changes.
Conditions for using polyurethane foam for garden sculptures
Conditions for using polyurethane foam for garden sculptures
If you have never worked with polyurethane foam, we recommend that you read the instructions from the manufacturer. Do not forget that the foam inside the container is liquid mass, and upon contact with air it begins to harden. Complete hardening occurs after 10-12 hours. When working with foam, use products personal protection. It is not recommended to carry out work at sub-zero air temperatures.
Before each use of the foam, shake the container well. While working, keep the can with the cap down so that gas does not escape from it and all the foam can be used. You should not apply many layers at once, as the uncured ones will fall off. Do everything gradually, apply the next layer at least 10-15 minutes after the previous one. For ease of application, use a special gun.
The appearance of a polyurethane foam figure directly depends on the type of frame. You should first find a picture of the figure or make a sketch so that all the nuances are taken into account and the finished product looks like a wooden or plaster sculpture.
To make the frame, you can take different materials, for example, plastic bottles or iron cans are suitable. Wooden planks, fittings and wire will also be useful to you. To make the sculpture stable, you need to fill it with sand.
Now you can start decorating the craft with foam. Distribute the foam evenly over the frame, taking into account the future reliefs of the craft. Once it has completely hardened, you can stationery knife remove unnecessary parts and correct defects. If necessary, add foam to places where you forgot or want to correct something in the craft.
A layer of putty will help protect the mounting foam from destruction. To garden craft turned out smooth, grout with sandpaper. Now take acrylic paints and cover the figure. Preferably two layers or more. To extend the service life of the future masterpiece, it is coated with varnish on top.
Garden figures can be additionally decorated with the most different materials, for example, beads, flowers or make LED backlight so that the sculpture glows at night.
In order to make a snail for the garden, you will need half a bottle of foam. Cover the table with oilcloth and begin applying foam for the base of the snail. When the first layer has dried a little, apply the second and insert a kefir bottle to make the snail's neck. Cover your neck with foam too and form a head with your hands.
Give the snail horns and a slightly elongated muzzle. After this you can start making the shell. To do this, a round mound of foam is applied to the snail's body. Now insert a bucket, which will be intended for flowers and will turn the garden craft into an original flowerbed.
Use a marker to mark where your snail shell begins and ends, and make curls. When the foam is completely dry, sand the product. All that remains is to decorate the snail and the garden craft is ready.
Materials:
- old saucepan;
- can:
- oil or acrylic paint;
- foam container;
- wire;
- beads.
1. Separately fill the pan and jar with foam and let dry.
2. The jar is the head, and the pan is the body of the frog. Fasten these parts with wire and secure with foam.
3. In the place where the frog’s arms should be, secure the wire and also cover it with foam.
4. Now shape the head and body so that they look like a frog. Make the lower legs as well.
5. Paint the craft with paints and then insert the eyes. The frog is ready, now it can be placed near a pond in the garden or near the pool.
To make a garden fox figurine, you will need a plastic bottle. Fill it with sand or pebbles, then the wind will not be able to turn your product over. Foam the bottle, but not immediately in a thick layer, but gradually, pausing for about 15 minutes for the foam to set.
You can use a rubber tube to make the paws. To make the legs flexible, insert a wire into the tube. The tail can also be made from a tube, which will need to be well foamed. For the neck use cardboard cylinder from under the toilet paper. Place some kind of round blank for the head on it.
Foam everything well and give the sculpture the appearance of a fox. After that, paint the figure oil paints and varnish. Keep in mind that if the paint is white, the varnish will make it yellow.
You can use a plastic ball as the frame of the kolobok. Place it on some kind of support, such as a jar or bowl. Now apply the foam, waiting for each layer to dry. To make handles, insert wire.
Also form the scarf from foam, and you can make the ears from cardboard. When the foam is completely dry, use a utility knife to cut out the eyes, mouth and nose. Make legs from wooden boards. All that’s left is to color the craft and the bun – it’s ready!
It is interesting that from polyurethane foam you can make not only garden figures, but also an original lantern that will give your garden plot a touch of exclusivity and help decorate your garden in a unique way. Japanese style. To make a lantern stand, take a pipe that needs to be foamed on the bottom side and installed on a level surface. wooden base. For the lantern bowl, you can use a plastic bowl that needs to be secured on top.
Now pour the foam in layers, waiting for each layer to partially dry. Come up with a design to decorate the lantern, draw a diagram and implement the idea using polyurethane foam. You need to make a hole in the center of the bowl so that you can secure the lid with self-tapping screws. Insert the bars into the bowl and foam them.
Attach the lid to the bowl with self-tapping screws. Now cut out a smaller square from the chipboard. Foam it on one side and secure the racks on the other. In the center of the squares you need to make a hole in order to insert a lamp into it later. solar battery. Hide the wires.
After this, a roof is made from a large piece of plywood, which is installed on racks. To make the relief design beautiful, first draw it with a marker on the surface of the lantern, and then carefully cover it with foam.
Garden figures made of polyurethane foam master class
The finished product is completely painted. To install it, you need to dig the pipe a little into the ground or make a small flower bed around the lantern.
DIY polyurethane foam figures will help transform any garden plot. Even without the skills of a sculptor and artist, you can make a beautiful sculpture that will enliven your exterior.
polyurethane foam can also be used to decorate rooms or building facades.
Konokhova Marina
How decorate the area Psychologists consider aesthetic perception as emotional cognition of the world.
Crafts made from polyurethane foam. We have a new kindergarten. To make it interesting and fun for our children to come to kindergarten , we decided to place Skazka with us. But she didn’t come to us on her own; we created her with our own hands to the delight of our students and their parents.
Little Bambi with his mother.
Cockerel and his friendly family.
Swan loyalty.
In a forest clearing
Corner of the swamp inhabitants.
And in just one month, fairy-tale heroes settled on our territory. They are all very funny, which is why they attract our kids. The kids really enjoy looking at them and taking pictures with these characters.
Material. For our own crafts used exclusively waste material (plastic bottles, pieces of old hose, canisters)
Besides available material, we needed assembly room foam and paints...and great desire.
To make a friendly rooster family, we used empty oil cans, scraps of fiberboard (beak, tail, comb, polyurethane foam, paint.
One more touch and the job is finished...
To make a crocodile, we needed two plastic bottles,
tape and foam assembly room.
Making a snail.
Thank you for your attention, if my material is useful to someone, I will be glad.
Reading time: 6 minutes
Landscape designer with 4 years of experience
The garden plot should be well-groomed and beautiful. Garden decorations are now at the height of fashion and have entered mass production. You can make them yourself using sealant for construction work. What are the properties of this material, and what kind of garden figures do craftsmen make from polyurethane foam with their own hands?
Pros and cons of working with polyurethane foam
Like any material, foam sealant has its advantages and disadvantages. Advantages:
- Easy.
- Can be applied to any surface.
- Can be adjusted.
- You can make small and large crafts.
- The products are wear-resistant and moisture-resistant.
Foam figures Flaws:
- Sunlight and precipitation negatively affect the material, it darkens and cracks. A paint coating is applied to the finished product.
- The cylinder cannot be heated; it is under pressure. Otherwise there will be an explosion.
- The sealant is porous; plaster and gypsum are applied to finished crafts.
- Foam cannot be washed off the skin with water, only with acetone, kerosene or another solvent until the composition has hardened.
What can be made from polyurethane foam
Using this material, various decorative figures are made to make the garden plot or cottage look original. What DIY crafts are made from construction foam:
- With a smooth surface - mushrooms, frogs, gnomes, storks, buns, Christmas tree toys.
- With a textured relief that replicates the skin of animals - fox, donkey, dog, fish, horse, hedgehog.
- In the form of household items - a decorated ball, vases, flowerpots, country lanterns, a volcano.
Polyurethane foam bun Tools and materials for work
Home conditions will not interfere with making high-quality, beautiful decorative ornaments for a garden plot. To work with polyurethane foam, you need simple materials at hand. Basic list of tools for making crafts:
- Foam for installation. In cans with a tube or a pistol. The pistol is more convenient.
- A sharp painting or stationery knife - trim off excess.
- Protective gloves. It is better to take latex ones, they are more durable than fabric ones.
- Sandpaper for sanding products.
- Paints and brush for decoration.
- Cleaner.
Tools for working with polyurethane foam
For the frame of garden figures use:
- plastic bottles;
- cans;
- hard wire;
- wooden planks;
- rubber hoses of different diameters;
- adhesive tape;
- if the frame is slatted, then you will need a nail to connect the planks to each other.
How to make figurines for the garden with your own hands
Before starting work, carefully read the instructions for use printed on the package with the substance. It is liquid inside, and as soon as it comes into contact with the air flow, it hardens, forming a dense foam. Completely hardens within twelve hours. Simple rules for making figurines:
- You cannot work outside in sub-zero temperatures.
- Be sure to wear gloves, the foam is toxic.
- The working surface is prepared in advance by covering it with paper or oilcloth.
- Shake the foam before use.
- When working, hold the can downwards. This prevents gas from escaping and uses more material.
- First, a layer is applied, after hardening - the next one. Otherwise the structure will collapse. Each freezes for 15 minutes.
- To weight the frame, sand, earth, pebbles or pebbles are taken.
- The surface of the polyurethane foam is sticky and takes up to 12 hours to harden. Therefore, be careful if the material gets on your skin, use acetone.
Foam lizard
The frame determines the appearance of the craft made from polyurethane foam. Before starting work, find an image of the figure, a diagram. The product is decorated after installation, strengthening and weighting of the base. The foam is evenly distributed, giving the product the desired shape with your own hands.
After the sealant has completely cured sharp knife cut off unnecessary parts and irregularities, and foam where necessary. Putty is applied to prevent the product from falling apart. Sand with sandpaper, leaving the surface without roughness.
Donkey made of polyurethane foam Cover the figure with a thin layer of transparent varnish. One or more layers are applied to the dried layer as needed. This increases the wear resistance of the polyurethane foam sculpture. Artificial flowers, beads, and LED bulbs are used to decorate the finished structure.
Mushroom
If you have never made crafts for your garden plot from construction foam with your own hands, then it is best to start with an ordinary mushroom, and only then develop creativity. The design is based on a simple plastic bottle. A primer will also be required.
Foam mushroom How to make a mushroom from foam sealant:
- Pour sand and pebbles into the container to weigh it down. This is the future leg.
- Cover the workpiece with a layer of foam, and make a thickening at the bottom for stability.
- Cut out a mushroom cap from foam plastic. The lid does not have to be perfect; asymmetry will add naturalness.
- Apply sealant on it in the shape of a cone or hemisphere.
- Then connect both parts using copper wire and glue.
- After drying, carefully cut off the protruding parts and prime to remove pores.
- After the primer has dried, the figurine is sanded and coated with varnish in two or three layers.
Dwarf
Garden gnomes are classic figurines for decoration. personal plot. To make fairy-tale characters, in addition to foam, you will need:
- large plastic bottle;
- pieces of wire;
- building gypsum;
- acrylic paints;
- newspaper.
Garden gnome made of polyurethane foam After preparing the workplace and tools, start working. What to do:
- First, fill the bottle with weights to make the figurine stable.
- Apply a layer of foam.
- Mark with wire the place where the arms and legs and the gnome's cap will be.
- Wrap newspaper around the wire.
- Foam the details.
- After drying, cut out the parts with a sharp knife, removing excess pieces.
- Eyes are inserted (available at a decor store).
- Sand the figure with sandpaper until completely smooth.
- Cover the person's face and arms with a bandage soaked in plaster solution.
- Apply a thin layer of plaster.
- Leave to dry for 24 hours.
- Paint the finished gnome with acrylic to your liking and apply protective agent. Insert a flashlight into your hand, then the figure will decorate and illuminate the area.
Frog
It is easy to make a garden frog from foam for installation. The main thing is to follow the instructions.
Making a foam frog How to do:
- Apply a layer of foam to the pan and tin can and leave for an hour and a half to set. A saucepan is a preparation for the body, and a jar is used for the head.
- It is good to glue both parts together.
- Apply a thick layer of foam to the structure, and while it is sticky, use your hands to form the outline of an amphibian.
- Twist the wire and insert it where the frog's upper and lower legs are.
- Cover with foam.
- The eyes are made from twisted wire and drawn on.
- After drying, sand the product, paint with acrylic paints and apply varnish.
- A frog is an ideal decoration for a garden plot. You can install it next to the pool.
Video
There are many craftsmen in Rus' - what modern Kulibins can’t come up with! Owners of a private farmstead, country house, have a natural desire to beautifully arrange the surrounding space. Of course, you can buy any sculptures in a store or on the market, but hand-made jewelry not only pleases the eye, but gives great scope to creativity and imagination.
All you need is a little patience, spatial imagination and original crafts from polyurethane foam will take their rightful place in landscape design your garden plot.
Properties of the material used
For your information: ready-made figures are not afraid of snow, rain, or wind, but from direct sun rays It's better to hide them.
Polyurethane foam has found wide application in many areas. Recently, it has become very fashionable to make beautiful sculptures and figurines from it.
In terms of their decorative value, they are much superior, for example, to tires, plastic containers, garden decorations of which, clearly emphasize the use of these recycled materials. Foam crafts look presentable.
Let us note some properties of this material:
- Processing is not particularly difficult; even a child can easily cope with this process;
- The extra fragment can be easily removed in the same way as the missing part can be added;
- In the process of working on a figure, waste foam material can pollute the surrounding space, so work should be organized in an open area;
- The sculpture should be sculpted only when this polyurethane foam sealant is completely dry.
Attention: if you do not have sculptural experience, then immediately creating a complex craft will be problematic. Start with something simple: a bun on a stump, ladybug on a sheet. This will be a great training start. Examples of easy-to-make works in the photo below:
Operating rules
Getting started creative activity, be sure to carefully read the rules that any master needs to know:
- Cover your workplace with old wallpaper, newspapers, cellophane;
- Read the manufacturer's instructions on the cylinder;
- You should only work outside when the air temperature is above zero;
- This product household chemicals in aerosol packaging is toxic: work with rubber gloves;
- Often a frame is used to make crafts. And since foam is very lightweight material To prevent the sculptures from being blown around the garden by the wind, weigh them down with sand, crushed stone, gravel;
- Immediately prepare a solvent, acetone or a means to wash off this sticky material - it may be very necessary;
- We use only paint for painting that is intended for outdoor use;
- The finished product must be coated with colorless varnish; this is necessary not only to improve appearance, but also for resistance to adverse weather conditions.
Please note: the hardening time depends on the brand of polyurethane foam sealant. On average, a thin layer hardens within half an hour.
What materials will you need?
Depending on what you decide to sculpt, the selection of the necessary available materials depends.
We present to your attention a constant set of items that you will need when you make products from polyurethane foam with your own hands:
- It is much more convenient to use pistol foam;
- A stationery knife with additional blades (you have to change them often when working - they quickly become dull);
- Latex gloves to protect your hands (fabric ones quickly become unusable);
- To “sand” the surface of products during work, you need coarse sandpaper, and to polish and bring the work to perfection, use fine sandpaper;
- PF paints and brushes for exterior work (aerosol paint adheres worse, if you decide to use it, you will have to do two or three layers);
- Color for paint (to achieve the desired shade);
- A set of artistic brushes of different sizes;
- Furniture colorless protective varnish (especially if you use acrylic paint);
- A rag for cleaning the barrel of a gun;
- To make the frame of the intended craft, you will need various plastic or unnecessary plastic containers, planks, fittings, wire, pieces of old linoleum and other waste material;
- Weighting agents (foam has little weight, crafts need to be weighted with some available material). Small stones, gravel, crushed stone, and sand are usually used as weighting materials;
- Putty: very convenient for adjusting some details during the revision process.
Idea: on the eve of the New Year, disposable plastic masks of various animals and fairy-tale heroes. Their price is pennies. And you can successfully use it either as a mold for decorating the face or muzzle of your hero, or simply by attaching it to the right place.
A unified algorithm of actions when creating any craft
It is better to engage in this type of creativity outdoors in warm time of the year. If you have to work indoors, make sure that the room is well ventilated. Cover the work area with polyethylene; the foam will not stick to it.
After reading the instructions on the cylinder, we begin to work step by step:
- Shake the can vigorously several times. At the same time, you need to hold it with the cap down;
- Initially, the foam “sets” within an hour, and finally dries, depending on the thickness of the applied layer, within 10 hours;
- Do not apply a lot of foam at one time; it tends to fall off under its own weight;
- Place the product frame horizontally. Initially, a layer of no more than 5 cm is applied;
- An hour later, after drying, the craft must be turned over, its surface moistened and the same steps repeated;
- After drying, fill unnecessary voids with foam, and remove excess fragments with a stationery knife;
- Bring to a smooth surface with sandpaper. It’s better to fix it on a wooden block;
- Start decorating after complete hardening;
- We have already talked about colors above. As for additional decor, buttons, balls, colored glass, wire of various textures and cross-sections and other improvised, natural or waste materials do a good job of this role;
For your information: if you want the fruits of your creativity to please your household longer, use putty for additional leveling: it is completely unaffected by ultraviolet radiation.
And, of course, strict adherence to safety precautions during work comes first (pictured below).
Jack of all trades
When all required material prepared, let's get to work. There is no need to hold in your imagination an artistic image of what you have decided to breathe life into. There should be a picture or photograph before your eyes, you should see clearly what you want to get in the end.
The frame can be made not only, as mentioned above, from plastic containers. The product will be more durable if it is welded from thin reinforcement or twisted from thick wire. According to the sculptors, the manufacturing process is simple.
But if you are doing this work for the first time, you need to start from the simple to the complex:
- Try making flat images first: apply a solid spot on cellophane, and after drying, you can cut out the desired figure;
- Then try to make voluminous, small, simple figures;
- The next stage: make larger figures, based on a circle, an oval;
- Next, you can try your strength and talent in making medium-sized frame crafts;
- After all the stages have been completed, consider that you are already a master, proceed to perform more complex work, you have already acquired the necessary skills.
Well, now, to the point.
Craft No. 1
We offer you several step-by-step instructions for making crafts. We will go, again, from the simple to the complex.
Let's take a step-by-step look at how to make a Christmas tree from polyurethane foam with your own hands:
|
|
From a regular cardboard box we cut out three isosceles triangle(you can cut out four or five, if desired). Their size doesn't matter. If the base is wide, then the Christmas tree will be wide, and if the base is high, then the Christmas tree will be taller |
|
It doesn’t matter how you glue it, as long as it sticks |
All these triangles are first from the inside out, folded as in the photo and glued together with tape. |
|
|
We assemble a triangular pyramid layout and align it. We also fix it on top in several places with tape. |
|
|
A rectangle is cut out of the same cardboard, which will serve as a base and at the same time a stand. |
|
|
We install a triangular pyramid on the base so that, firstly, there is finished product the bottom, and secondly, when blowing in the polyurethane foam sealant, our base would protect the surrounding surface from unwanted contamination. |
|
|
We begin to blow out the pyramid, going slightly beyond the boundaries of one triangle, and immediately hide the joints. If something remains not under the foam, don’t worry, it’s easy to fix later. |
|
|
The foam pressure should not be high. All sides foam in 2-3 minutes. The Christmas tree is almost ready. |
|
|
Let the foam harden. We look to see if there are empty holes anywhere - if there are, carefully fill them and leave them until they harden completely. |
|
|
We decorate our Christmas tree with rain or homemade toys. It looks very nice. |
Craft No. 2: snowman
Advice: if you need to foam very small space, and a standard tube does not fit there, try using a match to carefully heat this same tube and pull it out. Just do it carefully, it breaks easily.
Let's continue winter theme. Now let's look at how to make a snowman out of polyurethane foam step by step.
|
|
Place an ordinary balloon on the tube of a spray foam gun and tie it tightly with twine. |
|
|
We need two hot air balloon. We pump polyurethane foam sealant into both, one by one, let it harden and cut off the ones we no longer need. air balloons with frozen foam, knife. The top ball should be one and a half times smaller than the bottom one. We leave the scraps, they will be useful to us later. |
|
|
The bottom ball is on top, and the top ball from below needs to be slightly trimmed, so the workpieces will better overlap each other and hold steady. These trimmings will also be used. Using sandpaper or a fine kitchen grater, sand both parts and remove all the unevenness that remained after cutting with a knife. |
|
|
Cut off the trimmings from the upper and lower balls (these will be the legs) slightly at a bevel so that the lower ball can be installed in these recesses. |
|
|
We make the legs in a mirror image. We install the lower ball into the recesses made. He becomes more stable. |
|
|
Again, from scraps, we cut out the arms so that they fit against the body (pictured). |
|
|
We take a glue gun and use hot glue to securely fix all the parts and coat the joints between them. |
|
|
Next, we make a carrot nose out of the same foam. Carefully glue it to the desired place. |
|
|
Paint the workpiece in two layers with acrylic paint. It is difficult to paint on a porous surface. You need to fill every pore, and to get into it you need soft, thick brushes. After the first painting, let the workpiece dry completely, then lightly sand the surface and apply a second coat. |
|
|
We paint the nose with nail polish, and blue buttons work well for the eyes. We give our snowman a bucket (a cap from an unnecessary bottle of medicine) in one hand, and a broom (a small, worn-out watercolor brush) in the other hand. We tie a scarf from any fabric that we have at home, and dress our miracle in a hat. The final touch: draw a joyful smile with a marker. |
Craft No. 3: decorative tree
Apartment interior designers have recently picked up the idea of decorating walls with trees. This decoration can be found not only in children's institutions, but also in offices and even in apartments.
A tree is a symbol of well-being. We invite you to familiarize yourself with step by step instructions making this decor.
|
|
We take old wallpaper, and on its back side we draw a full-length silhouette of a tree. If you want to make a spreading tree, glue two or even three strips of wallpaper. This drawing should be placed on a flat surface under a canopy or in a well-ventilated room. |
|
|
We begin to draw the first layer of foam, gradually filling the entire silhouette. If you have a hollow in the tree, select it separately. |
|
|
Gradually increase the volume. If necessary, after drying, apply a second or even a third layer. Is the tree supposed to be in volume? Then stick branches where necessary, the length and thickness of which corresponds to your plans. |
|
|
Let the workpiece dry completely. Then we mix the paint with the color and begin to paint the bark of our tree. If necessary, we remove unnecessary things or add the necessary details. |
|
|
We wait until it dries completely. |
|
|
Carefully, using a stationery knife, we trim our tree along the contour. Turn it over to the reverse side and carefully apply glue to the entire area with a brush. |
|
|
Using strong adhesive, glue the piece to the wall. |
|
|
We finalize the details: grind, sand, add or remove fragments. Finally paint and coat with clear varnish |
|
|
We decorate at our discretion. The version in the photo has been modified according to the author's plans: some details have been added, and once again the work is carefully coated with white acrylic paint and colorless varnish. The craft located in the hall is an interesting decoration for the interior of a children's institution. |
|
Wood in the interior is fashionable |
Another option: wood, modified to perfection, is a stylish and trendy decoration for any home or cottage. |
Craft No. 4: Three Little Pigs
Now let's discuss the fairy tale theme. When creating your next masterpiece, you can slightly adjust the product as you work.
In order not to get dirty, it is better not to touch the raw foam, and when it is covered with a thin film, you need to cover the product again layer by layer. This way you can achieve the desired contour.
|
|
We make a blank from a five-liter plastic bottle, a bucket of mayonnaise. Instead of legs there are four sticks. If necessary, add weighting agent to the containers. Everything is secured with tape. The workpiece should become stable. |
|
|
Apply foam at the top and let it dry. |
|
|
Turn over and cover the entire piece with foam. |
|
|
We cut out ears from cardboard and attach them to the head while the foam is still damp, then we “foam” them too. Do not touch until completely dry. |
|
|
After drying, we begin to work with a stationery knife. Cut out the desired image: remove the excess parts. If you have removed what is unnecessary, foam it again, let it dry and achieve the desired result. |
|
|
We process it with sandpaper, it can be primed and prepared for painting. |
|
|
Thus, we prepare three figures and decorate either the garden or vegetable garden. |
Conclusion
Making figures from polyurethane foam is a fascinating business. As you understand, from this building material You can make absolutely any shape. Think over the frame, design, image of your hero - and get to work.
We recommend watching the video in this article, which will help you clearly look again at some aspects of the execution technique. Don’t hold back the flight of your imagination, create for the joy of yourself, your friends and loved ones.
The sculpture always attracts the views of others with its three-dimensionality and volume. It is always interesting to look at a sculpture, to find new details in it that do not immediately catch the eye. In that the sculpture seems more accessible, it differs from an ordinary drawing, which, one way or another, lies in the same plane.
But even in childhood, many of us simply loved to sculpt various figures from plasticine. Surely, if you loved doing this and were good at it, then you will also be good at making crafts from polyurethane foam. Sculptures made from polyurethane foam can become almost masterpieces of art; you can install them, for example, on your summer cottage, then your guests and neighbors in the area will be able to admire them.
When starting to make a particular sculpture, you must remember that:
- Polyurethane foam is a very light material, so it will be necessary to make a frame for the sculpture. Additional fastenings will also be needed, these could be pins, pegs or something else;
- Polyurethane foam is quite sticky, so you need to wear cotton gloves when working with it. Read about how you can wash polyurethane foam here;
- Polyurethane foam contains some toxic chemicals, so it is necessary to work with it outdoors, and it would also be a good idea to use a respirator when working with polyurethane foam.
Tools and materials necessary for working with polyurethane foam.
What you definitely need is a gun for working with polyurethane foam. To work with such a gun you will need professional polyurethane foam. You will also need (to wash the gun) a foam cleaner; you can also use it to clean any surface that accidentally gets stained with foam.
The finished sculpture will need to be painted. And for these purposes you will need acrylic paint, which is pre-diluted with water.
After the sculpture is painted, it will need to be varnished. In this case, a varnish that is used for facade works. So we buy it. Some varnishes can indeed produce a yellowish tint, but on sculptures it will not be so noticeable.
It’s interesting that not only sculptures can be made from polyurethane foam, but also used in other ways, for example, to decorate flower pots, I just won’t focus on this in this article.
Garden crafts made from polyurethane foam.
If you decide to make your own sculpture from polyurethane foam, then you must understand that this work requires compliance with certain rules. In addition, this work is quite painstaking and consists of successive stages.
First, you need to think over the image of the future sculpture. You can use almost anything as a frame for it: tin cans, pipes, buckets, bottles, which are connected to each other using tape or the same polyurethane foam.
If you set out to save a little money, then to give the sculpture the required volume, you can use various newspapers, then the layer of foam can be thinner, and the foam will last much longer. The foam must be poured layer by layer, and each layer of foam must dry for at least 20 minutes. If you don’t succeed right away, and the foam doesn’t lie quite as it should, don’t despair, you can always cut off the excess with a knife and do everything again.
Crafts made from polyurethane foam are very creative and very exciting process, thanks to which you can feel like a real sculptor, and your loved ones will definitely appreciate the result of your efforts. I also advise you to read the article: DIY crafts for the cottage and garden.
Crafts made from polyurethane foam video
Interesting DIY crafts made from polyurethane foam
Greetings, visitors to the crafts site. Recently, wandering through the vastness of the global network, I came across interesting photos - these were crafts made from polyurethane foam. This question interested me and I began to dig further. As a result, we got a mini-review of DIY foam crafts.
Now I’m trying to make simple things myself, namely garden figurines from polyurethane foam. I am not endowed with the talent of a sculptor, so I try what I am capable of.
So, let's begin our review of crafts made from polyurethane foam.
I was very impressed by the work of one enthusiast who managed to create the body and interior of a car from polyurethane foam.
Of course, a lot of time was spent and labor invested. But the result is impressive. Below are some photos of the DIY process and ready-made option car.
Continuing the automotive theme, it is worth saying that very often Russian car tuners at home make quite nice and comfortable podiums for acoustics.
As a rule, this cannot be done without the use of polyurethane foam. Its main advantage is that it is easy to process (cut, putty, paint, etc.) and is sold in any hardware store. Examples of foam podiums are shown in the photographs.
Crafts made from polyurethane foam can be works of art.
This is proven by craftsmen who manage to make sculptures from it. These can be figures of people or models of buildings. But in any case, to create such foam crafts you need the talent of an artist and sculptor, which is not given to everyone.
We come to my favorite topic - crafts made from polyurethane foam for garden decoration.
These are the so-called decorative garden figurines and original flower beds in the form of animals, plants, houses, etc.
Perhaps, I would also include flower vases made of polyurethane foam into the same category.
How to make garden figurines from polyurethane foam?
I really liked the golden vase in one of the photos below. By the way, making such a vase is simple: take a jar or glass, pour it over with foam, and then, when the mounting foam hardens, paint it.
With flower girls and figurines it is more complicated - first a foam base is created, then it is finished with a knife, then it is puttied, cleaned and painted. It turns out cool, and most importantly - unique.
For today, these are all crafts made from polyurethane foam that have interested me.
As soon as I find something interesting, I’ll immediately add to the article or write a new one.
In conclusion - a traditional video. This time it illustrates the creation interesting jewelry from polyurethane foam:
Did you like the article? Share the link with your friends!
Related articles:
Interesting ideas and DIY shell crafts
What can be made from wire using your imagination?
DIY apple crafts
Cool ideas and crafts made from stones
What can you make from a computer mouse?
What can you make from matches with your own hands?
Easter craft for kids preschool age 625 x 469 · 37 kB · jpg Source
Creativity 500 x 476 · 104 kB · jpg Vir
Set of decorative foam for 600 x 464 · 30 kB · jpg Source
Set of decorative foam for 600 x 266 · 16 kB · jpg Source
Themes: New Year, crafts, templates 800 x 566 · 501 kB · jpg Source
Decorative foam at 7 674 x 505 · 36 kB · jpg Source
Easter craft for preschool children 625 x 469 · 53 kB · jpg Source
Easter craft for preschool children 625 x 469 · 49 kB · jpg Vir
Easter craft for preschool children 625 x 469 · 42 kB · jpg Source
Easter craft for preschool children 625 x 446 · 46 kB · jpg Vir
File bookmark.pdf 316 x 500 · 44 kB · jpg Source
Keys and houses with handles and handles 575 x 383 · 141 kB · jpg Source
Cut the shell of the orange cut 1200 x 1200 · 745 kB · jpg Source
Tags: harley, davidson 600 x 430 · 96 kB · jpg Vir
READ OUT
Decorative foam Decorative foam
Decorative self-adhesive film 2271 x 1524 · 127 kB · jpg Source DIY gift wrapping 1280 x 859 · 66 kB · jpg Source Easter crafts for preschool children 625 x 469 · 37 kB · jpg Source Photo / Handicrafts / Crafts for the holidays 640 x 480 · 72 kB · jpg Original ship from
Plastic filler Plastic filler
Decorative foam Decorative foam
Products made from colored paper for her 625 x 469 · 30 · kB jpg Source of crafts from colored paper for her 625 x 469 · 27 · kB jpg Source of crafts from colored paper for her 625 x 469 · 52 · kB jpg Source of crafts from colored paper her 625 x 469 · 23 kB · jpg Source Crafts from colored paper
Pen for creativity Pen for creativity
Foam for creativity, hot glue 575 x 470 · 174 · kB jpg Source Set of decorative foam 600 x 464 · 30 · kB jpg Source Set “Do it yourself.
Girl 900 x 1200 · 287 kB · jpg Source Set "Do-it-yourself doll. Girl 900 x 1200 · 245 kB · jpg Original craft
Craft for creativity Craft for creativity
365 IDEAS of ships, creative forces 604 x 503 · 73 · kB jpg Source viola doll set with hands 900 x 1200 · 299 · kB jpg Source Set "Do it yourself."
Prefabricated Foam Artifacts: Manufacturing Properties
Girl 900 x 1200 · 287 kB · jpg Vir Set of decorative foam for 600 x 266 · 16 kB · jpg Vir Set decorative
from 10. Ratings: 99.
Crafts for the garden made from polyurethane foam
Garden sculptures and crafts made from polyurethane foam
How to make a tree on the wall with your own hands from foam
DIY bas-relief.
Master class on making bas-relief “TREE”
The secret of wall decoration Bas-relief, Master class from Alexey Pimenov clip – 2 wall relief decoration
Our project lives and develops for those who are looking for answers to their questions and strive not to get lost in a stormy sea of often useless information.
On this page we told (or rather, showed :) you How to make a tree on the wall with your own hands from foam. In addition, we found and added for you thousands of other videos that can answer, it seems, any of your questions.
However, if the site still does not contain the information you are interested in, write to us, we will prepare it for you and add it to our site!
If it’s not difficult for you, please leave your feedback on how complete and useful the information posted on our website was about How to make a tree on the wall with your own hands from foam.
Polyurethane foam bun
Every owner of his own plot dreams of making it beautiful, unusual and cozy. In order to bring this idea to life, we suggest trying to make a kolobok sculpture with your own hands from polyurethane foam and available materials.
How to make a bun?
First of all, let's stock up on everything we need:
- polyurethane foam, if you are interested in this work, you may need more than one cylinder;
- foam gun;
- special cleaner for hands and washing the gun from foam;
- several pairs of gloves, preferably fabric-based;
- a small round object (for example, a ball or even a small saucepan) that will be used as a base;
- strong wire for hands;
- thick cardboard;
- small wooden blocks that are useful for legs;
- sharp knife.
Let's get to work.
- We apply several layers of foam on our base, drying each one well for about 15-20 minutes.
Have you noticed how the foam increases in size? Please keep this in mind for the future. If this is your first time holding a foam gun in your hands, we’ll give you a little advice: near the handle there is a screw with which you can adjust the thickness of the jet.
- We make handles from wire. We bend it, insert it into the body of the future bun and foam it, not forgetting to dry the layers.
- Foam is also used for the kolobok scarf. If you suddenly manage to apply it not quite evenly, then use a knife, carefully giving it the desired shape.
- Cut out the bow ears from cardboard. We cut them into the gusset on top and foam them just like everything else.
- We treat the blocks prepared for the legs with foam and attach them to the body of the bun.
- Half an hour after applying the last layer, when the figure has dried, cut off all excess and proceed to shaping the face, cutting out the eyes, nose and mouth.
- That's it, all that remains is to decorate your hero. There's a little trick here. It is best to choose oil paint. After painting the figurine twice, take it outside. After standing in the sun for a couple of days, the foam will settle a little and yellow spots may appear.
Foam crafts for the garden | Little mermaid and cat made of polyurethane foam
After such “airing”, it is worth painting the bun for the third time.
- If you want your bun to be bright, then after the last layer of paint has dried, coat it with varnish. If you plan to create another figurine in the future, then try to find ship varnish, because... Compared to other varnishes, it gives a lesser yellowing effect.
But any varnish for outdoor use is suitable for the kolobok.
This is how quickly and easily you can create a real fairy tale on your site that will delight not only children, but also adults.
From polyurethane foam you can make not only kolobok-themed crafts, but also a huge number of interesting and simple sculptures that will last for many years. Just if you go out at night, don’t be afraid of your creations, and don’t forget to warn guests about them.