Holidays in the country are always associated with spending time on fresh air. Furniture provides maximum comfort of stay. Alternatively, other options may be considered. Making a gazebo takes a long time and is not always possible. Therefore, they prefer to make swings from metal, which is quite possible with your own hands. Drawings and materials for garden swings will help you in installing the structure.
Swing design
Garden swings are designed for outdoor seating. Measured swing has a good effect on peace of mind, conducive to conversation. But to achieve this, it is necessary to choose the right design, and, if necessary, develop a unique drawing.
When designing, it is necessary to take into account the following nuances:
- Seat size. It must accommodate at least three people.
- Maximum load capacity. Calculated based on seat size.
- Stationary or portable design. For a summer residence, it is preferable to choose the latter option.
- Availability consumables, tools. Joining elements is best done using a welding machine. Constant vibrations can negatively affect the reliability of the mechanical connections of components.
Additionally, it is necessary to provide a protective and decorative covering for the seat. It could be wooden lining, fabric pillows or their equivalent. From a performance point of view, wood would be the best option.
Drawings of a classic swing
For quick production, it is recommended to use a frame structure. The swing will consist of a base made from a square or round section. The seat is attached to or chains using hinged blocks. To protect against direct sun rays and rain they prefer to make a canopy.
Design and manufacturing specifics:
- The side parts of the structure are made trapezoidal. Optimal width base – up to 1 m.
- Stiffening ribs are required. They will increase the stability of the swing.
- To make the seat, two corners are welded, and then horizontal transverse strips are attached to them.
- The protective visor can be removable or stationary. The optimal manufacturing material is polycarbonate sheet.
The advantages of this swing are: large selection appearance, the possibility of using artistic elements in design. The disadvantage is the relatively large mass. Two people are required to carry the mobile model.
Hanging models
This option is applicable for only one person. The main advantage of a hanging swing for a summer cottage made of metal is the ability to attach the seat to the ceiling of the veranda or to a tree branch. An alternative is to make a fixing frame from metal pipes. This option is much more difficult, since professional bending of the workpieces will be required.
The main difficulty in manufacturing lies in the formation of the hemisphere of the seat. As a base, you can take a tubular frame and install rattan branches on it. Also use any other similar natural material. A fastening is made in the upper part to secure the structure.
In practice, such swings are rarely made of metal. Most often, drawings of classic models are used. If the technology is followed, they can last for decades.
DIY metal swing: very often when arranging the yard of a private house or garden, they are installed swing. Such structures are made of metal, wood, car tires and other available materials. But in order to achieve a truly high-quality result, use drawings and photos of do-it-yourself garden swings made of metal: dimensions and performance characteristics These products allow you to use them for a long time.
Features metal swing designs are strength, reliability and durability
Classification of DIY garden swings made of metal: photos and features
For the construction of metal structures are used various materials. That's why there are so many design solutions. This is evidenced by numerous photo of a DIY metal garden swing, which can be found on the Internet.
Futuristic swing design made of metal
The following materials are used for the manufacture of structures:
- metal corners;
- square profiles;
- I-beams (steel beams);
- pipes (round profile);
- brands (aluminum profiles).
Hanging swing made of thin pipes located on the terrace of a country house
Pay attention! Based on these elements, both family-type benches and children's rocking chairs can be created with equal success. small size.
Before you start planning and designing garden swing drawings do it yourself made of metal, you need to decide on the type of future design. To do this, you can study ready-made systems offered by modern industry.
Original swing hanging type with metal frame
How to make metal: photos and examples of products
If you're wondering how make a swing with your own hands for children, take factory-produced options as an example. Such products have a correctly calculated design and are represented by a large number of interesting design solutions. All you need to do is create a similar swing from scrap materials.
Suspended from a metal frame on chains
Classification of products from manufacturers:
- free-standing garden structures. This type of product can be installed in any place that you consider suitable, since they do not require the manufacture of additional support or hangers. A swing of this type can be not only metal, but also wooden;
Material for garden swing Can serve both metal and wood
- sofa swing, which can be used by both adults and children. In the second case, the product allows several skaters to sit on the bench at the same time. The designs are comfortable and safe, equipped with a comfortable backrest. During periods of heavy rain or winter time swing are easy to remove, since their design is of a block structure. Products can be metal or wood;
Mobile version of the swing made of metal with a seat made in ethnic style
- designs equipped with a reclining backrest and a mosquito net. They can be used as children's metal swing for the garden. You can add other accessories to create additional comfort;
- swing, made by forging, which have many advantages.
Factory garden swing made of metal installed in the garden of a private house
Photo of a DIY garden swing created using the forging method
Swing of this type are made primarily for installation in areas country houses. To create these products, you will need skills in handling a welding machine and metal, or you can hire an assistant. In this case swing are more durable and powerful than other options for metal structures. In addition, you receive an original product that can become an interesting decorative addition to the landscape and exterior of the house.
Diagram with installation dimensions garden wrought iron swing(1 inch = 2.54 cm)
Metal products made by forging have a high cost. But it is justified by its excellent decorative characteristics.
Useful advice! Use similar structures to maintain the overall design of the house and its surrounding area with installed fence, window bars, street lamps, benches, balconies, stair railings, canopy() or gazebo, which are created according to this technology. To achieve unity in design, forge the same or similar pattern on all listed products.
Weightless in appearance and graceful forged swing with colorful pillows
Characteristics of a DIY metal garden swing
Metal structures have the greatest number of advantages compared to products made from other materials. That's why this happens on the Internet large number photos and drawings of do-it-yourself children's swings made of metal.
Technical and operational swing characteristics metal based:
- long service life is one of the main advantages. The metal is not subject to the harmful effects of such factors as, for example, rotting processes. Breakage due to drying out is also excluded;
Wicker cocoon swing with a metal frame will become unusual decoration yard of a private house
- practicality - destructive influences on buildings environment(ultraviolet radiation, rain and other types of precipitation) cannot affect the strength characteristics of the material;
- reliability - thanks to the increased strength of the metal and its durability, the resulting structures are very strong;
Metal pipes are an excellent material for creating a frame for a children's swing
- budget - metal has a lower cost when purchased than wood high level quality (wood low quality will not be able to ensure the strength of the product, therefore for creating a swing it does not apply);
- variety of modifications - assortment modern swing, which you can purchase or make yourself, is extremely wide, which allows you to choose a design that fully suits your individual preferences.
Unusual hanging swing made from thin metal pipes
Disadvantages of homemade metal swings for a summer house
Despite the external attractiveness of metal products, they themselves will not be able to fit harmoniously into summer cottage as it happens with swing made of wood. To do this, you will need to stylistically support their design by adding similar elements to the exterior of the house or garden.
Pay attention! Metal structures can be do it yourself, however, you will need to study welding technology and acquire the appropriate skills, as well as purchase or rent the necessary equipment.
Cozy metal swing with wicker plastic seat
One of positive characteristics material, namely the hardness of the metal and its durable structure, can also be considered as a disadvantage. On the one hand, durable and solid swing- what is needed for a summer residence, on the other hand, they can cause serious injuries that a person can receive as a result of an impact. Compared to wood, which is soft by nature, metal is many times more dangerous.
Metal products are susceptible to corrosion. Rust can lead to gradual deterioration, so the durability of the structure can only be ensured if it is properly maintained. To prevent corrosion, it is enough to promptly coat the metal with a layer of paint intended for metal surfaces And street conditions operation.
Hanging children's swing with a frame made of metal
Drawings and photos of do-it-yourself garden swings made of metal: dimensions and technology
Manufactured DIY garden swing may have different type frame. Based on this feature, the following design options are distinguished:
- collapsible;
- welded
Welded types of swings require the use of a welding machine and other special equipment. As a result, you will have a strong and rigid supporting part, which will allow you to operate the structure for many years without any risk to health.
Frame mounting dimensions garden swing from profile pipes
If you do not know how to handle a welding machine, choose a swing with a collapsible design. The principle of assembling the frame is to twist all the elements of the product with bolts and nuts. Anyone can do this kind of work.
Pay attention! Over time, in a DIY metal garden swing, the threads at the joints gradually become loose under weight and other loads. As a result, backlash (free space) appears. It can cause the structure to collapse, resulting in possible injury to a person. To prevent this, secure the elements using groovers and locknuts. Do not forget to regularly tighten the joints with a wrench.
Modern design metal swing for garden
Brief classification of DIY metal garden swings
The easiest way is to create a design using ready-made drawings of a DIY metal garden swing. Looking at the diagrams, you can see that the configuration of the supports varies.
The A-shaped frame base consists of two crossbars that are connected to each other at the top. There is a jumper approximately in the middle of their height. It is designed to increase the rigidity of the structure. There are supports without a jumper, which are L-shaped.
Bright children's swing made of metal with A-frame support legs
Another type of support is elements with a crossbar, forming a U-shaped base. Creating such a structure takes less effort, but the swing is less stable. Their operation will be long and safe if the foundation supports are placed in deep holes in the ground and well concreted.
In addition, all metal products can be divided into two groups:
- stationary – supporting part swing securely concreted;
- portable - fixed using anchor bolts or bent reinforcement, which is driven into the soil.
Metal swing located in the garden of a private house will become a favorite place to relax
Technology for creating a swing with your own hands from a profile pipe
Hanging swing are considered the most common design options. They are convenient, practical and comfortable. Equip the product with a canopy to protect it from direct sunlight. Thanks to this, the seat will not overheat, and the riding process will become even more comfortable.
To make a canopy for DIY metal children's swing textiles, tarpaulin, wood with soft tiles in the form of a roof can be used. But most suitable material is cellular polycarbonate. Polycarbonate sheets are transparent, so it will not be dark under the canopy. At the same time, they perfectly diffuse direct sunlight.
Drawing of a frame for a garden swing from a profile pipe
List of necessary tools and materials
Before you make gardening, make sure you have the appropriate tools:
- Bulgarians;
- building level and tape measure;
- welding machine and protective equipment(for working with the device);
- electric drill;
- a set of drills designed for working with metal and wooden surfaces;
Mobile hanging swing-chair with metal frame
- screwdriver;
- set of wrenches;
- self-tapping screws designed for fixing polycarbonate sheets.
For the work you will also need to purchase materials, namely:
- metal profile(pipes and corner);
- boards or blocks of wood for assembling the seat;
Metal swing of an original shape suspended from a tree branch using a rope
- bolts equipped with semi-countersunk heads (for seat assembly);
- washers and nuts for bolts (for seat assembly);
- elements for fastening made of stainless steel or galvanized (carabiners, pendants on bearings, eye bolts, chains);
- anchors or bent reinforcing bars of great length (for fixing the structure to the base);
Device diagram and mounting swing frame dimensions made of metal
- sheet cellular polycarbonate(canopy roof);
- protective agents for the frame (primer with anti-corrosion properties and painting composition for metal surfaces);
- protective means for the wood from which the seat will be created (stain, varnish, set of brushes for surface treatment).
Selection of designs for creating a metal swing with your own hands vast and limited only by your imagination
Drawings and photos of a do-it-yourself metal swing: preparatory stage
At this stage, a zone for swing installation, the dimensions of the structure are determined. Optimal size hanging bench is 1.5 m. This is enough for swing it was possible to accommodate two skaters or lie down for one.
Useful advice! Be sure to leave a gap between the post structure and the side of the bench. Minimum size– 300 mm.
Dimensions for making metal children's swings
According to garden swing drawings with your own hands from a profile, the design consists of the following elements:
- support frame rectangular shape at the base;
- sidewalls made of a pair of pipes fastened together by welding;
- horizontal crossbar for hanging the bench.
Process creating a garden swing design consisting of metal pipes
This information will help with further assembly. Thanks to this structure, the structure acquires the required level of rigidity. By choosing the right base width, you can build a very stable product. Take the rule as a basis for your work: the larger the angle that is at the top of the triangle between the base and the sides, the more stable the structure will be.
Diagram of the swing frame structure made of metal with A-shaped posts: 1 - flange; 2 - nut; 3 - crossbar; 4 - eye nut; 5 - support frame stand; 6 - frame coupler; 7 - bolt
General dimensional parameters are calculated individually. The indicators regarding the polycarbonate canopy and hanging bench are adjusted to them. Experts recommend that it is mandatory to prepare drawings indicating all dimensional parameters of the structure to make it more convenient to work with the material. Subsequently, this will save you from mistakes and save time.
Various sizes mobile swing chairs made of metal. Similar designs can be made with your own hands.
Do-it-yourself assembly of a swing from a profile pipe according to drawings: frame part
It is recommended to start work on assembling the frame from the side parts. To do this, based on the drawings, you need to mark the pipes and cut them using a grinder. Please check the dimensions for accuracy before assembly. All four sidewall elements must be similar to each other. They need to be connected in pairs using the welding method. As a result, you should have two identical L-shaped parts.
Diagram of the frame structure with dimensions for metal garden swing
Next sharp end, located at the top of each of the parts, is sawn off at the same level. This procedure is performed so that a small support platform can be formed to fix the horizontal crossbar.
Useful advice! Use a pre-prepared template for your work.
Metal swing with your own hands unusual shape can become the main attraction of a personal plot
The width of the support frame (short side) must correspond in size to the distance that is formed between the paired pipes of the side parts of the structure. The sidewalls are welded to the support frame rectangular in shape, and then a horizontal crossbar (on top of the side posts).
All stages of assembling the frame part must strictly obey the laws of geometry: the side posts have a vertical type of arrangement, the horizontal crossbar (beam), intended for hanging the bench, runs parallel to the base. To control assembly parameters, use a building level.
Frame diagram children's swing from a profile pipe
Wooden swing seat assembly technology
- an important stage of construction. Especially if you are creating baby swing drawings made of metal with your own hands. At the base of the seat there should be a frame base made of steel angle. To get a bench with comfortable backrest, position it at a certain angle relative to the seat. The optimal angle size is 120°.
Garden swing family type with metal frame and wooden seat
To make the corner bend correctly, make a triangle-shaped cutout (60°) on one shelf. The frame part for the seat is made of a rectangular metal profile using the welding method. The side parts should be connected along the edge zones using horizontal jumpers. The connection zone should also be in the place where the structure bends.
Three different swing seat options with a metal base to which wooden slats are attached
Useful advice! If you wish, you can improve the design by adding armrests to the seat. They will increase comfort and safety.
Regardless of whether you are creating a DIY swing for children or making a product for adults, the back and seat should be completely smooth. Suitable for these purposes wooden blocks or boards carefully sanded with sandpaper (first coarse grain, then fine).
Unusual swing hanging type with metal frame
Boards are cut required size and are attached to the frame through pre-made holes with bolts so that their heads are recessed. Before final assembly of the structure wooden elements are treated with an antiseptic and a varnishing composition, and metal ones with a primer and paint.
Eye bolts are mounted in the corners of the frame part of the bench. The chains will be attached to the ears of these bolts with carabiners or threaded couplings. To hang the bench, you will also need to install eye bolts at the corners of the product or above the edges of the seat.
The procedure for making a garden swing with metal frame
Making a canopy for the structure
The process of making a visor is optional. But if you are creating a swing design with your own hands for children, you should think about comfort and protection from the scorching sun, as well as precipitation.
To do this, you need to make a rectangular structure, which will be based on a metal frame reinforced with jumpers. A sheet of cellular polycarbonate is fixed on top of the structure. The canopy is installed at a slight angle, so that precipitation will flow down freely.
Metal swing sofa type with a canopy, installed in the courtyard of a private house
To make the frame part of the canopy, take several metal profiles with a small square section. All these elements are held together by welding, after which the canopy can be attached to the upper frame part of the swing. This is also done using a welding machine.
When all assembly work is completed, the structure is subject to final processing. The surface of the swing is covered with a primer and then painted in any color you like.
Various options for creating a canopy
made of polycarbonate over the swing
The final stage of construction
Once the paint is completely dry, a polycarbonate sheet is attached to the canopy frame. To do this, use self-tapping screws with sealing washers.
Useful advice! Cover the end part of the sheets with a polymer profile. It will protect the hollow polycarbonate structure from insects and dust, maintaining its beauty and neatness.
A wide range of colors is one of the advantages of polycarbonate. You can choose the color of the visor to match the color of the swing or, conversely, make it contrasting. Moreover, the color of the material has a direct impact on the level of scattering of sunlight.
A wooden pergola serves as the basis for hanging a metal swing
The finished product must be securely fixed on a concrete platform. If the structure is installed on high-density soil, several clamps made from reinforcing bars can be used to fix the frame. You should first sharpen the ends of the clamps, which will allow you to drive the rods 0.5 m deep into the ground without any problems.
It is better to use as a fastener on a concrete platform anchor bolts. They are installed in advance in appropriate places. After tightening the nuts, cut off the excess threads with a grinder. At this point, the construction of the structure is completed.
A swing in the courtyard of your house is one of the central structures. They can be single-seat children's ones, but it is better to choose a more durable and spacious option. Knowing how to weld a swing and having some skills welding work, can be manufactured and installed useful design from metal on your own.
Available for sale various options in width and finish. But the price of such products is quite high, so the desire arises to weld a simple swing for a child yourself.
Before work, you need to think through the entire structure, make drawings or sketches. To start work, you need to decide on the size of the seat. The overall dimensions of the swing depend on this.
Dimensions
The simplest version of a rocking chair is a board secured with ropes to a tree. But most people are interested in a permanent structure that can serve several generations, so they want to weld a metal swing.
They are usually made from thick-walled pipes with a diameter of 50 mm. For an accurate calculation, you need to decide on the number of people who will ride on the swing at the same time.
It is customary to take an average seat length of 600 mm for 1 person, but a larger distance may be needed. If two or three riders are riding, it is customary to add 1 m for each.
In shape it can be a simple seat, or a bench with a back. It all depends on the imagination and capabilities of the performer. A common option is a seat for two people with a length of 1600 mm.
Materials
To weld a durable seat, you will need:
- corner with shelf 30 mm;
- profile pipe 25/25;
- steel plate 4 mm thick and 40 mm wide;
- wooden boards, 50 mm thick;
- wood stain and impregnation;
- primer and paint for metal.
These are the main materials for making the seat. In addition, you can weld a frame for a small backrest with a width of 400 mm. In this case, it will be safer to ride on the swing.
First, the lower part is made from the corner. It is assembled taking into account the fastening of the seating boards. The shelves should form a box. 2 standing profile sections 250 mm long are welded to the front side at the corners. We fix a profile 400 mm long at an angle of 200.
The plate is cut 100 mm larger than the width of the base. We clean all the edges with a file to remove burrs and give the edges a semicircular shape. At a height of 250 mm, the plate is welded to the rear pillar parts.
Place small potholders on the front pillars, and bend the protruding edge along the diameter round pipe and the rounded end at the bottom is grabbed to the stand.
You get safe handrails for the swing. After this, on the back of the profile a jumper is made at the top of the racks. Measure the middle of the back and weld a metal plate jumper to it.
Preparing the boards
After you have successfully welded the seat of a swing for two children (or adults), all that remains is to trim the joints and check the quality of the seam. When making a children's swing, attention to the quality of the seam should be increased. It is inspected and, if necessary, covered again.
Boards are cut to the size of the base, the edges of which are rounded manual router or a simple plane and a bastard file. The front board is also processed in this way from the outside.
Holes are made in the base for fastening the boards. They can be drilled with a drill or burned through by welding. It is necessary to burn with inside. Metal deposits from the outside are cleaned by welding. The same operations must be performed to secure the boards to the back of the swing.
The boards are adjusted and secured using wood screws and checked to see if they fit well. Then they are removed, treated with impregnation and a layer of stain or paint is applied.
It is necessary to process parts from all sides so that the swing seats last longer. After applying the impregnation, you must clean them with sandpaper.
Hanging the seat
Now you need to decide on the method of attaching the seat to the main structure of the swing. In other words, understand how best to hang it. There are several options:
- secure with a rope or rope;
- using metal chains;
- fastening parts made from profile pipes.
Each method has advantages and weaknesses.
Rope or rope is not a very durable material, is not resistant to weather conditions and can break due to friction over time. In addition, such a swing will constantly twist and get tangled. This option is not very reliable, although it is simple and fast.
Chains are a durable material that is not exposed to the atmosphere. They are galvanized and are not destroyed by severe corrosion. Installation is quite simple.
On the top bridge of the swing you need to weld 2 brackets with rings. Weld rings with identical pieces of chain inserted on the seat in the corners.
At the top they are attached in pairs to the rings. To do this, a cut is made on the ring and a chain link is inserted into it. Then the incision site is welded. The design is durable, easy to manufacture, but there is one drawback - it constantly gets twisted and tangled.
The third method, using a profile pipe, best suits the requirements of durability and safety. To do this, you need to weld 2 standing parts of the required length on the sides of the bench. Then I attach them to bushings with pressed bearings. This is a safe, durable and reliable method.
Frame installation
It is necessary to decide on the method of attaching the swing frame. If it is portable, then the entire structure at the bottom must be tied with a profile pipe and secured with crutches driven into the ground. In the case of a permanent installation, they dig a trench using a shovel, insert embedded elements and fill the foundation with concrete.
The height of the swing should be at least 2.5 mm, the width of the base 1 m. The swing from pipes is made in the shape of the letter “A”. Cut 4 pieces of thick-walled round pipe 3 m long.
A base measuring 3x1 m is made from a profile pipe. The thick-walled pipe is cut at an angle. At the top, at the junction, the corners are cut at a large degree, and at the bottom they are installed at the corners of the base. All parts are secured by welding.
Then you need to make the upper jumper and weld the frame into a single unit. To impart rigidity to the structure, the joints of the parts (nodes) are secured with sheet metal gussets.
All joints are welded, beaten, and the quality of welding is checked. The joints are cleaned with a grinder and a sanding stone, after which the swing frame is installed on the foundation and welded to the embedded parts.
Last stages of work
All that remains is the work of attaching the seat on the stand-up parts to the crossbar of the swing. You need to buy 4 bearings with an internal diameter of 15 mm. The bushing is selected according to the outer size and one bearing is pressed into place on each side. The bushings are pressed onto a rod with a diameter of 15 mm.
It is necessary to bend the rod and weld the resulting bracket to the upper jumper. These nodes also need to be strengthened with additional scarves. Now set the seat at a sufficient distance from the floor and weld the pillar parts to the bushings. This joint of welded parts must be of high quality.
All that remains is to clean the joints with a grinder and use a file to remove all burrs. Metal parts degrease and apply primer, paint oil paint for outdoor work. After drying, install wooden parts backs and seats.
The garden swing is ready. Now children and adults can enjoy outdoor recreation. You can additionally equip the swing with a tarpaulin awning or simply install a beach umbrella.
In various ways you can achieve comfortable conditions for relaxation in the country. Along with beautiful gazebos and comfortable benches, do-it-yourself garden swings for a summer cottage are also of no small importance.
A swing is a place where you can ride, relax, and sit when there are no other places in the garden. Photos of a swing at the dacha with your own hands can be easily seen on the Internet, and a number of rules or instructions will help you without any problems. special effort create such a useful product.
And note, such swings are intended not only for children, but also for adults. The most important thing is to correctly calculate the weight for which the future swing is intended, as well as correctly build a safe and reliable design swing.
Classification and properties
Typically, swings for a summer house are made from such traditional materials like wood and metal. To decorate external characteristics an object or to add reliability and safety to a structure - elements of decorative forging are often used in work. Also used when working:
- bars;
- elastic and durable rope;
- metal pipes;
- plastic;
- old armchairs or chairs without legs, which serve as the basis for future swings;
For a successful result, of course, you should first make drawings of the swing, as well as an approximate model.
Garden swings can be created in absolutely different shapes and types. An original and comfortable swing will also become a great option garden decor or landscape of any dacha.
Mobile swing
They are a lightweight design, so moving such a swing from one place to another is very convenient and quick. For example, during rain or in winter, you can move such a swing to the veranda. The size of such swings is not so large.
Family swing
The design of such swings is already more durable and massive. They are endowed with a high and wide back, and look like large benches for relaxation, only without legs. That's why they are called that, since all family members can fit on such a swing.
To ensure a high level of reliability during the operation of the swing, the swing is fixed to a frame, most often U-shaped. The swing is fixed using tight chains or cables.
You can also build a roof over such a swing so that it doesn’t get wet during rain, and you can enjoy nature while riding on the swing.
DIY baby swing
A separate group of products, which in most cases is a boat or a chair suspended in the air. Children's swings must meet all safety and reliability standards.
Suitable for adult children, but little ones can only use it with the help of their parents.
The size of a garden swing in most cases depends only on you. You can also make children's swings in larger sizes.
The type of swing design is also variable:
Hammock-shaped swing. Such swings are located on crossbars made of wood or metal. A person sitting on such a swing feels like he is floating above the ground. This swing is especially great for reading books and listening to music.
Single swing. The designs can be varied, and the installation of crossbars is not even required. Installing such a swing is not a very complicated process. They can be installed absolutely anywhere. Most often it is a swing made of pipes. We are talking about metal pipes.
Hanging swing. Question: “How to make such a swing?” does not have a complex answer, because everything is very simple.
Pay attention!
A swing is a regular seat that is suspended on several ropes or chains. As a rule, the fastenings are located on the sides.
You see how many options for creating a garden swing you have in your arsenal.
The key point, of course, is to take care of safety while relaxing on the swing. All possible circumstances should be taken into account and the swing should be provided with maximum reliability and comfort.
Do not forget also about the aesthetic properties of creating a swing. A beautiful and original swing, made in a special style, will attract the attention of neighbors and guests, and children and relatives will enjoy relaxing on such a swing.
Photo of a swing for a summer house with your own hands
Pay attention!
We all have moments when we want to do nothing and just sit and enjoy our free time. A garden swing made from a profile pipe, which you can make yourself, is suitable for this. You can calmly sit on it, lie down or take a nap. There are two- and four-seater options. Some models can protect from rain or sun, and comfortable seats guarantee comfort.
Design and design of a rocking chair made of a profile pipe with a polycarbonate canopy
In addition to the positive aspects, the swing also has advantages from a practical point of view. They have a stable backbone built from 4 strong legs. Due to the fact that the basis of the design is a metal profile, such swings can withstand heavy weight: from 230 to 280 kg.
Detailed drawing with the dimensions of the rocking chair design for the garden The frame gains strength and a long service life because the steel for the frame is not afraid of many destructive environmental factors. The frame is heavy, so it’s not even scary for strong wind. There are 2 types of garden models:
- portable, they can be placed anywhere and put away for the winter;
- stationary - installed for the entire period of their service.
Choose the type depending on how often you are on.
DIY garden swing - step by step instructions
The price of a good model is not always financially accessible, so there is only one way out - to do it yourself. Now we will learn how to make the classic version.
You need to start planning and construction with a support; it is responsible for the stability of the entire structure. For production, a profile pipe measuring 50 mm is taken, welding machine, bearings, metal brackets.
Drawing with dimensions of a garden swing from a pipe for self-assembly To hang the seat you need chains or metal beams. At the beginning of work, a plan is prepared.
- Drawing. You need to calculate everything, sketch out a diagram with exact measurements. This will ensure the accuracy of welding and installation of the structure.
- Blanks. In accordance with the drawing data, pipes from the profile are cut.
- Preparing for assembly. Before welding, nicks and other defects are removed.
Names of elements and structure of a pipe swing with a canopy The work should begin with the manufacture of the frame; the sequence of actions can be studied below in the list:
After making the frame, you can proceed to the next step. The seat is suspended on metal rods, chains or high-strength ropes. To make it wood will do, plastic. The size depends on your requirements.
The use of metal chains to suspend the seat simplifies the entire design The most common are 2, 3 and 4 seater swings. They can be left “naked” or covered with leatherette or waterproof fabric. To make the seat soft, you can place foam rubber under the upholstery. It is better to make the mattress cover removable so that if it gets dirty, the insulation can be washed or removed.
There are many different swings for relaxation: or without. The visor is an optional element, but it has a number of conveniences:
Metal swing chair with corrugated canopy - protects from sun rays;
- creates cover during light rain;
- covers the seat from falling leaves and other objects if the swing is under a tree.
For manufacturing, you can take metal or wood. The choice of top is quite varied:
In addition to the main parts, you can use additional elements, for example, curtains, pillows. They will add sophistication and increase comfort.
To give a swing a long life, you need to choose high-quality materials.
Ready project and a drawing with the dimensions of a metal country swing It is important to take into account all the nuances and take care of the structure from time to time. Suspension elements are responsible for safety. They must be as durable as possible. They must be secured with special responsibility. If these are chains, then monitor the integrity of the links.
If metal rods are chosen, they must be firmly welded. When choosing a rope, special knots are made for fastening.
Using ropes in a rocking chair The last option can only be used in swings that are not designed for heavy loads. Why do craftsmen recommend metal for the frame:
- more durable than wood;
- long service life;
- it gives stability correct installation and rational use.
Before starting work, you need to plan everything in detail, transfer the plan to a schematic drawing.
Drawing with dimensions of a pipe frame for installation in the garden 
Interaction scheme various elements swinging structure Interesting ideas, with detailed description, can be found in construction manuals. To get an exceptionally positive experience, you need to follow simple rules.
When welding a structure, remember to be safe when working with power tools. Tie the connecting parts tightly. Securely anchor the legs into the soil to prevent them from loosening and tipping over.
The right place on the site for a swing with a canopy will provide a comfortable daytime rest in the garden The components must match each other. If the seat is heavy, then it should be supported by more powerful fasteners.
When operating, use adequate loads and do not leave small children unattended.
Watch the video for a review of the finished swing made from pipes and wood.