DIY chair: furniture accessible to everyone. DIY fireplace chair DIY soft chair made from scrap materials

The idea to make a baby easy chair DIY has a number of advantages. The main one is the opportunity to save money. Homemade furniture costs several times less than purchased items. At self-production interior items can be selected optimal design, size and color of the final product.

Children's room

The room for the child should be spacious enough for games, cabinets, tables and chairs, toys and other accessories. And most importantly - a comfortable and functional place to relax. Installing a bed is not always justified, especially in small rooms. Frame products also do not always meet safety aspects. In such cases, parents think about how to make a children's bed that can be transformed into a chair. This is a feasible task that can be solved without the involvement of specialists.

Thanks to a creative approach, you can make safe upholstered furniture that a child can independently move, disassemble and assemble.

Frameless chair that can change shape

Such products consist of several pillows fastened together. These interior elements have many advantages.

They are as follows:

Light weight. To make transformable furniture, timber, plywood and heavy pressed boards are not used. The chair can be easily moved to a new place when the need arises.
Safety. The accessory does not have hard surfaces and sharp corners that children may hit. When unfolded, the height of the soft part above the floor does not exceed 20 cm - a child falling in his sleep will not cause him any discomfort.
Presentability. Properly made and tastefully decorated furniture looks beautiful and representative, fitting organically into the interior.

A folding chair without a frame is easy to maintain and repair. It can be easily disassembled into component parts that can be quickly replaced or updated.

What you need

Before starting work, it will be necessary to conduct a survey of the premises and draw up diagrams. You need to measure the size of the free niches and the area that can be occupied by furniture. If you make several identical items, you can use them to assemble a sofa or corner for spending time together with your child’s family or friends.

To do child seat with your own hands, you will need to accurately calculate the need for materials. It is advisable not to skimp on fabric and make all pillows the same color on both sides. This way the furniture will look much better when unfolded.

Calculate the pattern frameless chair you can use paper copies of each pillow and ottoman to scale. The cut rectangles are laid on the fabric roll strip layout so that there is less waste. Separately, it is advisable to add a supply of material to the calculations for replacement in case of damage to the product.

To make a chair with your own hands you need the following materials:

foam rubber slabs 10 cm thick;
upholstery fabric;
inexpensive chintz;
braid 2 cm and 5 cm wide;
threads;
detachable zippers;
decorative elements;
synthetic glue.

Tools needed to make a chair:

sewing machine;
tailor's meter;
roulette;
scissors;
stationery knife;
marker or pencil.

Since the foam will have to be cut sharp knife, That flooring It is recommended to protect it during operation. For this, plywood or a piece of old linoleum is used.

Sewing order

To make upholstered folding furniture, you must have a sufficient supply of needles and threads.

Sewing covers is carried out in the following sequence:

A strip of material is spread on the floor. If there is such a possibility, it is better to fix it tightly in the corners in a taut state.
The patterns are transferred to the fabric. It is advisable to place the templates on the same line in order to obtain several blanks with one cut. The details of the pattern are made clearly visible. The part marking is applied on the reverse side.
The marking is checked for correctness. After this, the material is cut with scissors. The excess is removed, and the blanks are stacked.
The edges of the workpieces are finished using an overlocker. The covers are sewn together, zippers and wide braid are attached to them.

To strengthen the edges of the pillows and give the correct shape, sew narrow braid along the corners of the covers.

You can sew a bean bag chair with your own hands in the same way. Since it has a rounded shape, the seams do not need to be reinforced with braid.

Filling the filler

For a pear-shaped product, an internal cover is made of thick fabric. It is necessary to retain small fragments and dust. Foam balls, polyethylene or polyvinyl chloride can be used as filler. All these materials are environmentally friendly and are sold on construction markets.

To fill the cover, 0.3-0.5 m³ of material is required. To accurately calculate the need, you need to multiply half the length of the rounded part by the width and depth of the base. It is recommended to purchase balls with a reserve of 20-30% in order to add them to the case as the filler shrinks. Backfilling is carried out using a scoop; the completeness is determined experimentally. The receiver of the work is the child. After filling the inner reservoir, it is zipped up and the outer cover is pulled over the top.

Children's chair made from scrap materials

Making armchairs and chairs from foam rubber, polyurethane foam and mattresses is an excellent and profitable way to recycle old things. Old beds, wardrobes and sofas are used as starting materials. Their components are used as blanks for frames, sides, armrests and niches for things.

Tools and materials

To make folding upholstered furniture, you will need:

roulette;
hacksaw;
square;
electric drill;
screwdrivers;
wrenches;
sandpaper;
PVA glue;
sewing machine;
ruler;
marker.

If a sofa is being disassembled, then the work uses a folding mechanism, corners, bolts and nuts.

What do you do with old furniture?

The vast majority of soft chairs can be divided into frame and frameless. Children's chairs stand apart, the production of which has a number of technological differences. The question arises: is it necessary to pay a lot of money for a finished product if you can make something similar with your own hands?

We will tell you about the process of making upholstered chairs, provide drawings, photographs and videos that will allow you to successfully complete the task. You will also find a list necessary materials and tools.

1 What will you need?
2 How to make an upholstered chair with your own hands?
- 2.1 Traditional soft product
- 2.2 Beanbag
- 2.3 Child seat
3 Drawings and useful video

What will you need?

First of all, you need to decide on the upholstery material. There are significant differences in both the cost of upholstery and its physical properties. Let's look at the most popular options:

Velours. Velvety and fleecy fabric. Externally it resembles faux fur.
Chenille. Natural material, “diluted” with synthetic fibers. Thanks to this, the surface does not roll off and is practical and durable.
Flock. The fabric vaguely resembles velor, but experts recommend using flock to make child seats. The fabric is easy to clean and wash, has water-repellent and wear-resistant qualities, and does not fade.
Jacquard. The fabric is easy to clean and highly durable, but the structure includes synthetic fibers. Therefore, loose loops can lead to tightness.
Faux suede. The material is fleecy and durable, does not fade and can “breathe”. Ease of care is an added bonus.
Faux leather. The material is characterized by high wear resistance. In this case, the leather is distinguished by the presence of embossing.
Tapestry. This is a natural and very expensive fabric, which can be distinguished by its visible weaving. Multi-colored threads, woven into the overall structure, form beautiful patterns.

The most primitive frame structures are based on a plywood template. Therefore, you will need sheets of birch plywood, screws, nails and a standard set of tools:

protractor;
steel ruler;
compass;
bench and hand vices;
scriber;
files;
hand scissors;
hammer;
hacksaw;
adjustable wrenches;
soldering iron;
pliers;
table anvil;
hand drill;
chisel;
sharpener;
punch;
center punch

If you make a bean bag chair, your toolkit will be significantly reduced. In addition, there are simplified technologies developed by folk craftsmen that allow you to assemble an upholstered chair quickly and with a minimum set of equipment.

DIY photo of soft chairs

On wheels

Folding

With knitted element

With low seat

How to make an upholstered chair with your own hands?

Any work cannot be started without a clear action plan. Decide on the design of the future piece of furniture. It is more difficult to create a frame chair, but it looks more respectable.

If you decide to sew a bean bag chair, get ready to master the patterns. Your actions will lie not so much in the sphere furniture production, how much in the field of sewing art. In any case, you will need an approximate budget and an idea of the consumption of materials. For example, a bean bag chair costs 1200-1300 rubles. This includes fabric for the outer (about 300-500) and inner (200-300) covers. Also, 500 rubles are allocated for the purchase of filler.

Perhaps you already have an old “grandfather’s” easy chair that has lost its presentation? Then you can retighten and repair it with your own hands, as shown in the following video:

Traditional soft product

An ordinary chair requires a thorough approach and extensive preparatory stage. Let's look at the list of materials and tools required to make a plywood chair with upholstery:

20mm plywood;
electric drill;
emery cloth;
screws;
jigsaw;
metal rims;
thin nails;
foam;
wood glue;
artificial leather;
stain;
black glossy paint;
pencil;
masking tape;
roulette.

Let's get started:

After downloading one of the drawings below, proceed to large-scale work. Calculate the amount of materials and start making the template. First they are made cardboard templates, plywood parts are cut out from them.

The sides of a standard chair resemble a banana. You will also need cross bars. Decide on the angles of inclination, bending and dimensions of the product.

Surface wooden parts cleaned and polished. Pay special attention to the ends - soak them in heated drying oil, flatten the fibers with a hammer (if bends are provided). Each frame detail is cut out using a jigsaw.

The sides of the chairs are painted or treated with stain. The ends of the sidewalls are reinforced with metal rims. After this, the tightening process begins.

The necessary holes are made with an electric drill. The rims are fixed with screws. First, the back part of the backrest is trimmed with artificial leather, then it is the turn of other fragments of the chair.

To secure the fabric you will need wallpaper nails with large heads. At the back, the upholstery is fixed along the transverse parts (along the very edge), at the front it should cover the slats. It is better to treat the attachment points with wood glue - this will increase the level of reliability.

Modern easy chair with your own hands

Bean bag chair

The simplest version of the bag is the so-called pear chair. You cannot do without the following materials:

calico or satin (about three meters);
a piece of fabric for the outer cover (about 3.5 meters);
meter-long zipper;
filler;
fabric for appliqué;
scissors, pins and thread with needles.

Manufacturing:

Copy the pattern you like from the Internet, enlarge it and transfer it to the required parts. For the upper and lower covers, the work must be done separately. The result of your efforts is a small top bottom, a large bottom and six fabric wedges.

Sew the wedges and start sewing the bag. Small area must be left unsewn. In addition, both bottoms are sewn together. Having finished with the top cover, proceed to sewing the bottom one - the procedure will be similar.

From the fabric you have chosen, you need to cut out the elements for the applique - they are placed on top of the cover. A zipper is sewn into one of the gussets - this will allow you to remove the cover and wash it if it gets dirty. Two-thirds of the volume of the inner cover is filled with filler, which can be used as polystyrene foam.

After compacting the inner cover with filling, insert it into the outer cover, and then fasten the zipper. The bean bag chair is completely ready for use.

Pay attention to the strength of the seams of the inner cover - they should not come apart under the influence of the weight of a sitting person.

We will talk further about how to make a children's soft chair with your own hands.

DIY bean bag chair

Child seat

Making a frameless soft chair for a baby is as simple as making a regular bean bag chair. The difference lies solely in the dimensions and colors of this piece of furniture. Bright, cheerful colors that do not irritate the eyes and set the mood for positivity are welcome.

You can make a soft frame chair for a child with your own hands in the shape of a semicircular “sandwich” from wooden blocks and chipboard. The front wall of this design is made of plywood, the back wall is made of hardboard. The internal space of the glue along the bend of the back is filled with glued pieces of cardboard.
After waiting for the wall to dry, smooth out the unevenness construction knife. A layer of foam rubber is carefully glued on top, on which the upholstery will subsequently lie. You can use eco-leather or flock as upholstery fabric - these options will allow your design to survive the unequal struggle with felt-tip pens and paints.
Now about the dimensions. A standard adult chair has a meter height (some models reach 120 centimeters) with a bottom diameter of 30 centimeters and a top diameter of 15 centimeters. The height of the child seat should not exceed 60 centimeters (diameters will be 25 and 11 cm, respectively). Take this nuance into account at the pattern design stage.

DIY frameless children's chair

Drawings and useful video

In this section we have selected photographs of the most successful homemade chairs, which we could find on the RuNet. It is impossible to imagine the process of independent furniture production without drawings, so we post detailed diagrams and patterns for bean bag chairs.

Drawings of chairs for making them yourself

Oblique

Retro style

Folding

With soft pillow

You will also enjoy a master class on creating an upholstered chair with your own hands. Watch the video, repeat the steps of the wizard and adhere to the described technological standards.

So, with the help of the presented video, you will learn how to make a bean bag chair with your own hands, which has gained immense popularity in our country:

By the way, if you have Euro pallets, you can make a chair with your own hands from such material, and then just throw a comfortable soft pillow on the seat. Don't believe me? Watch the following video:

Many people think that furniture production is magic, the secret of which a mere mortal is not able to comprehend. Believe me, with a minimum set of tools, desire, attentiveness and perseverance, you can easily cope with the task. We have presented everything you need - drawings, photographs and videos, so go ahead and amaze your loved ones with your art!

An armchair is one of the most comfortable, cozy, and therefore popular interior items. All chairs are usually divided into 2 categories: with or without a frame. Finished product often not cheap. But for home craftsmen, nothing is impossible. A DIY chair is a completely solvable issue. In the article we will consider detailed master classes on the manufacture of soft products, as well as original wooden product for the dacha.

Types of upholstery

Upholstery for upholstered furniture- one of them important points. The presentable appearance of the product largely depends on it. Before making a chair, decide on the type of upholstery fabric. Here are the most popular options:

Velours. Noble fleecy fabric reminiscent of short fur.
Chenille. A fleecy, durable fabric made from a mixture of natural and synthetic fibers. It does not roll down and retains its beautiful appearance for a long time.
Flock. Externally, the material resembles velor, but is even more practical. Flock is easy to clean from dirt, so it is recommended to use it for upholstered furniture in children's rooms.
Jacquard. Durable dense patterned fabric, which is distinguished by increased durability. Disadvantage - due to careless handling, puffs may appear.
Faux suede. High durable material, which is great for making a DIY chair. Faux suede with embossing looks especially beautiful.
Tapestry. High-quality, expensive fabric made of natural fiber, with visible weaving. Threads of different shades form a pattern.

Set of necessary materials

If we are talking about frame structure, the simplest option for the frame is plywood cut according to a template. The best option– birch plywood. From consumables- screws and nails.

You will also need a set of carpentry tools:

Metal ruler, compass, protractor - for marking.
Vise: manual and table.
File.
Hacksaw.
Hand scissors.
Hammer.
A set of adjustable wrenches.
Soldering iron.
Pliers.
Drill.
Kerner.
Chisel.
Punch.

Important! If you want to make a fashionable and custom bean bag chair with your own hands, then the set of necessary equipment will be significantly reduced. All you need is a sewing machine and stuffing material.

Work planning

The beginning of any business is drawing up a clear action plan. Think over the design of future furniture. Making frame chairs is more difficult and expensive, but they have a more respectable appearance than frameless structures.

Success in making a bean bag chair depends on how accurately and correctly the patterns are drawn up. This is no longer so much furniture production as the art of tailoring. Don't forget to calculate the budget for the event.

Important! It’s not bad if you have an old, but quite decent and durable chair. In this case, a lot is simplified, since you can restore it and get an interesting vintage item.

Classic soft product

Such a thing as a DIY soft chair requires a long preparatory stage. Materials you will need:

Plywood 20 mm thick.
Sandpaper.
Electric drill.
Sets of screws and thin nails.
Electric jigsaw.
Metal rims.
Foam rubber.
Joinery adhesive.
Painting tape.
Ruler, tape measure.
Stain, glossy black dye.
Pencil.

Now you can get started:

Download the drawing of the chair you like, calculate the consumption of materials.
Make cardboard templates to scale, transfer the outlines onto plywood, then cut out the pieces using a jigsaw.
Clean and sand the surface of the wooden parts. Please pay attention special attention end areas, soaking them well with drying oil.
Paint or stain the sides. Reinforce the end parts of the sidewalls with metal rims. Secure the rims with screws.
The next stage is covering the product. Start from the back of the back, using faux leather. Next, proceed to covering the remaining parts of the product. Secure the fabric with wallpaper nails.

Important! It is advisable to treat the fastening points with wood glue. The chair will turn out better.

Bean bag chair

This product is also known as a pear chair. To make it you will need:

Calico or satin fabric - 3.0 m.
Fabric for making the outer cover - 3.5 m.
Zipper - 1.0 m.
Filler.
Pieces of contrasting fabric for decoration.

The procedure for making this chair model is as follows:

Download the bean bag chair patterns that you liked the most.
Make cardboard patterns to scale.
Transfer the contours of the chair onto the fabric. You will need to sew the inner and outer covers separately. As a result, you will have 2 bottoms (top and bottom) and 6 fabric wedges.
Sew the wedges together. Leave in the received bag small area unsewn. Sew the top and bottom bottom. After you have finished sewing the top cover, sew the inner cover in the same order.
Cut out decorative elements appliqués and sew onto the outer part.
Insert the zipper into one of the wedges. If it gets dirty, you can remove the outer part and wash it.
Fill the inner bag about ⅔ full with synthetic filling. Now all that remains is to put the inner bag on the outer one. Zip up.

The DIY chair is ready! As you can see, there is nothing particularly complicated here.

How to make a soft chair with your own hands for a children's room?

Making a frameless soft chair for a children's room is no more difficult than a regular bean bag chair. The only difference is in color.

Important! It is better to choose a bright fabric that encourages positivity and cheerfulness. Shades should not be too “screaming” and annoying.

Here is one of the options for upholstered furniture in a child’s room:

The frame chair can be made in the form of a semicircular sandwich. For back wall hardboard is used, plywood is used for the front.
Carefully glue the furniture foam onto the base, on top of which the upholstery will lie.

Important! Best options The upholstery material is flock or eco-leather. Even if a young artist paints the upholstery with felt-tip pens or paints, you can remove the marks completely.

The maximum height of a baby seat should not exceed 600 mm.

Wooden chair for a summer house

Here's more interesting option: DIY wooden chair. Wood is a practical, beautiful and durable material, which, moreover, can be easily processed. In addition, wood has the following advantages when making home or country furniture yourself:

Availability of a variety of lumber, their relatively low cost.
Naturalness, environmental friendliness.
Pleasant smell of wood. Coniferous wood smells especially pleasant.
Unique wood texture.

Important! It must be taken into account that the conditions in which country furniture, if not extreme, then close to them. Therefore, you need to pay special attention to treating parts with an antiseptic. In this case, the furniture will serve you much longer.

Pine, spruce, ash, oak, larch or beech are best suited for home furniture production. Parts that are not subject to heavy loads can be made from linden or alder.

So, let's make garden chair with your own hands. Choose simpler drawings to begin with. When choosing a design, follow two “golden rules”:

Choose the design that is completely clear to you. Mentally work through the entire procedure. Prepare in advance the tools that are convenient for you.
Consider the place where the furniture will be used and the design of the room into which this furniture will fit. For example, the best option for a summer house is a folding product or an antique rocking chair.

Manufacturing procedure

Let's consider a simple model, which consists of the following components:

Sidewalls – 2 pcs.
Drawers – 3 pcs.
Cross slats – 35 pcs.

It is these 35 slats that will form the surface of the seat.

Most the hard part work involves cutting out the side parts:

First, make a pattern on cardboard and only then, after making sure that the actions are correct, transfer the outline to the material. The best option for making sidewalls is plywood with a thickness of 3 cm. Use an electric jigsaw to cut out parts.
Sand the end parts of the sidewalls. With the help hand router or grinders, remove the chamfers.
Now cut out 3 drawers from plywood. The length of each is 120 cm, width - 10 cm. Sand these parts; there is no need to chamfer.
From a 50x25 mm block, cut 35 sections, the length of each of which is 120 cm. Next, as usual, comes sanding and chamfering. For fastening, prepare 12 confirmations 5x120 mm and wood screws 4x45 mm (40 pieces).
Mark the places for attaching the drawers. There are 3 of them in total: in the foot, head and in the middle of the outer arcs of the sidewalls. Drill through 8 mm holes for the drawers.
Pull the side parts of the product together with three drawers. For holes in the end parts of the frames, use a 5 mm drill.
Now fasten the pre-prepared pieces of bars to the seat using self-tapping screws.
The final stage is covering the holes and cracks with wood putty. After this, sand the product, prime the surfaces and paint with varnish or acrylic paint.

Video material

As you can see, making a chair with your own hands is quite possible. In the independent production of chairs different types there is nothing particularly complicated. Good luck to you!

In modern furniture stores you can find any piece of furniture to suit every taste and style. Sometimes financial situation or too high demands do not allow you to find a suitable chair in style and comfort.

That is why now you can find instructions on how to make a chair with your own hands step by step.

What kind of chairs can you make with your own hands?

You can find a lot of instructions on the Internet on how to make a chair, which is why anyone can do it, especially if you know how to use a standard set of tools.

First you need to buy everything you need, the missing tools and materials, and then start creating sketches and drawings of the future piece of furniture.

The peculiarity of a DIY chair is that it makes no difference which sketch you use. There are certain step-by-step instructions, the points of which everyone adheres to.

Before starting work, you should familiarize yourself with the possible seating options and choose the one that interests you. However, I note that some types are very difficult to make without special equipment, and some require a lot of experience. We also recommend that you watch a master class on how to make a chair with your own hands.

Types of chairs

If you have a question about which chair to make with your own hands, then here is a list of all possible options that you can make yourself:

Usually a chair

An ordinary chair, it is also called soft. It consists of three main things: frame, upholstery, and filling. Suitable for installation in the home.

Folding chair

It has a frame that can be folded or unfolded. This option simply cannot be replaced when relaxing outdoors, at sea, or even at home if, for example, you always have a lot of guests and there aren’t enough chairs for everyone.

Kentucky

Chair for the garden or cottage. Looks great in the garden or country house, easy to make.

Ladle

A sports-type chair on which several belts can be installed, thereby effectively securing the person sitting in place.

Photon

A transformable chair that is both a chair and a mattress. Moreover, this “transformation” is very easy to implement.

Sliding chair

Great for rooms small sizes, due to the fact that they simultaneously perform the function of both a bed and a chair.

Chair on small wheels

It is convenient to ride around the entire apartment or house. Will help elderly and sick people with housework.

However, it is worth remembering that the wheels are under the weight human body, can leave scratches on the floor, especially if you have varnished parquet flooring in your home.

High back chair

Perfect for people who sit for a long time, for example, at the computer, no matter on personal initiative or for work.

Thanks to the fact that you can fully lean on it, you can sit in it for much longer. It is also very comfortable. By the way, there are soft and hard options.

Rocking chair

Surely, you associate the mention of this piece of furniture with an elderly person. However, this type chairs help many people, for example, with sleep disorders or mothers of babies.

The latter not only rock the baby to sleep, but also relax themselves. For example, after a sleepless night, this is an excellent option; you will definitely be sure that you will not accidentally drop your child due to fatigue.

Non-folding chair

Very convenient to use, helps to fully relax and unwind after a hard day at work. Now their choice is huge, so you can not only make it yourself, but also look for the desired option in the store.

Previously, non-folding chairs with so-called ears were very popular, on which it was convenient to lean and they also served as a kind of fence.

Bean bag chair

Probably the most comfortable chair on the entire list. It does not have a frame, but inside there is a soft filler that can completely replicate the contours of the human body.

Due to this feature, it is truly the most comfortable and you can relax and unwind in it. Not only is there a huge amount of design for these chairs, but you won’t spend a lot of money and effort to make it.

By the way, if you don’t understand a certain type, then look at the photo of a DIY chair of this type. This way you will not only understand what kind of chair we are talking about, but you can also stumble upon step by step instructions your favorite piece of furniture.

So today you found out best ideas DIY armchairs, namely their types, which you can make yourself at home. I hope you have no questions left on the topic and have chosen the appropriate type of chair.

Photos of armchairs with your own hands

In this article we will consider the topic of making classic furniture for almost all apartments and houses - a do-it-yourself chair. This solid wood chair with armrests will not be bulky and best use such products are tableware. Following these instructions, you can do it at home.

The production of the chair will take place in several stages. All of them will be presented below and you can easily make it in a few evenings if you have the tools and materials, because all the schemes will be presented below. There will be no ready-made drawings in this article, since everything is done from improvised means: from boards, plywood bars, which are available.

Frame

Let's call this stage the chair frame.

Of course, almost the entire skeleton will be covered with foam rubber and fabric. Only part of the legs will remain visible.

The back legs are the most important parts of a wooden chair because you need to make them at some angle.

Without thinking for a long time, to make the back part of the chair structure, we took an ordinary dining chair that was available, although it did not have a seat. But he was well suited for the role of template. You can take some old grandma's chair.

Markings were made on a 50x150 board.

Be sure to mark the level of the seat of the chair, make it the same as for the chair. In this case it was approximately 410 mm from the floor.

Use a jigsaw to cut out the legs of a homemade fireplace chair.

Then we used the finished part as a template to make three more legs, because we are making two chairs at once with our own hands from scrap materials.

The front legs will be straight and square - 55x55 mm. To obtain such a cross-section, you can glue the boards together, and then saw them down to required size. We glued 2 pairs of 2 boards, 120 mm wide and 30 mm thick.

There is no glue between boards 2 and 3

Note. A chair with a solid structure is called a frame chair.

While the front legs were drying, we finished assembling the back frame - we made the upper part, the upper part of which has a slight rounding. Then we made the rear seat support bar.

We assembled all parts of the back using self-tapping screws 60 mm long. Before tightening the screws, it is necessary to apply wood glue to all connections and drill mounting holes.

Mounting holes are also called auxiliary or guide holes. They must be drilled so that the self-tapping screw does not go to the side when screwing in and so that the workpiece does not crack. The diameter of this hole is approximately equal to ⅔ the diameter of the self-tapping screw.

We continue to make our wooden chair with our own hands. The blanks for the front legs were glued together and dried. We saw them down to the required size of 55×55 mm.

Place them on the backrest structure and check the length of the legs and whether they lie on the same surface so that the chair does not wobble during use. If the lengths are different, then align them.

The ends of the front legs need to be narrowed. To do this, make small bevels on all four sides.

Make side bars 400 mm long and secure them as shown in the figure below. For better fixation, it is advisable to use screwing screws at an angle, having previously made auxiliary holes.

Install the front seat support bar. It is the same length as the back bar.

To make the English armchair with ears strong, we prepared four parts, the ends of which were cut at an angle of 45 degrees. We applied glue and secured them with screws in the corners of the frame.

Then we cut a piece of plywood to fit the size of the seat. Plywood thickness 18 mm. We secured them with self-tapping screws, after applying glue.

If you want to make the seat softer, then instead of plywood you need to use furniture textile tapes. We will use such ribbons when making the backrest.

The chair must have armrests, otherwise it will be a chair. Let's look at the stages of their manufacture.
The front post and the armrest crossbar must be installed at a right angle. Determine the height of the armrest yourself, it will be 200-300 mm. The cross-section of the bars is square - 50×50 mm.

Secure them with self-tapping screws, screwing them in at an angle.

A classic chair should have “ears”. To make them, prepare a board and a block of the same thickness for each side. Study all the photographs of the “ear” making process. Connect the blanks with self-tapping screws, then draw a curve and cut along the lines. Attach the finished assembly to the back and armrest.

For the right side, use the left “ear” as a template.

You might think that making a chair with your own hands is not such a big deal. simple task, but I want to assure you that the hardest part is behind us.

Before we start upholstering, let's strengthen the frame a little - add crossbars to the back and armrests, as shown in the photo.

Let's add a strip to level the surface of the armrest, round it and sand it.

Upholstery

Now you can begin the upholstery process.

Cut 50 mm thick foam rubber to the size of the seat and glue it to the surface of the plywood.

Fasten the horizontal textile straps to the back of the chair using a construction stapler, and then the vertical ones.

Take 10 mm foam rubber and cut a piece from it that will be 40-50 mm larger than the seat area.

Now cover the top with furniture fabric. Then, using a furniture stapler, secure the cover, padding polyester and foam rubber to the chair seat structure on all four sides.

We attach 25 mm thick foam rubber to the sides and armrests of the chair. To get around the curves, make several cuts as shown in the photos below.

Then remove everything unnecessary.

We continue to consider the topic of how to make a fireplace chair with your own hands. Furniture fabric It needs to be secured at the back as shown in the photo.

At the front of the seat, we made a slit so that the fabric could be folded over and secured.
An overview photograph of the intermediate stage of chair manufacturing without drawings.

Then we covered the sidewall and armrests with synthetic padding. To secure the padding polyester, it is better to use aerosol glue so that the bond occurs over the entire surface.

We wrap the almost finished chair with armrests in fabric.

And on the front part, at the junction of the armrest and the seat, we bend it at an angle.

See how the sheathing is attached to the inner invisible part; the excess is cut off.

Most likely you have already noticed that the sidewall itself is not sheathed. Because for this we will use a separate piece of fabric, it will be easier to adjust all the bends and curves - we do all this at home.

Here is the view from the outside and what will remain in the invisible part.

Finally we got to the back. We use the same foam rubber (25 mm thick), padding polyester and go through all the same steps that were done with the armrests and sidewalls.

Cover everything carefully with a cloth.

Video about how to make a Chester chair with your own hands covered in leather

Before sewing the back part, remove all excess, trim the fabric and threads. Nothing should remain protruding beyond the frame.

To give volume and a finished look, we need the back wooden chair was beautiful and even, to do this we fasten the straps and put lining fabric on top of them, as shown in the photo.

When manufacturing, we do not use a drawing of a chair with exact dimensions; we do everything on site. But if you will make 2 or more products and want them all to be the same, then based on the first chair, take all the necessary measurements and transfer them to paper.

Fasten the padding polyester and then the fabric onto it.