How to ideally end a troublesome and tiring day on fresh air? The best way To relax after working in the garden, relax on a sun lounger with a glass of freshly squeezed juice in your hands. At the same time, it is very important that the chaise lounge fits perfectly into the surrounding environment and gives a feeling of peace and tranquility. Can't find the right one country furniture in stores? Then it's time to learn how to make it yourself.
Types of sun loungers for the garden
Before you make a chaise lounge yourself, you should decide on its type. However, experts advise not to experiment, using modern ones as a basis. plastic materials, characterized by poor quality and fragility. Better look for a high-quality wooden base with a flat, smooth surface. The only drawback of such a property will be its large weight, but this problem can be solved by installing rollers on the legs.
Materials for work
To make a wooden chaise longue with your own hands, you need to prepare the following materials and tools:
- a slab of laminated wood, the thickness of which will be at least 2 cm;
- boards (0.25 cm) and beams (0.45×0.45 cm) for finishing works and creating a frame;
- electrical appliances (jigsaw, screwdriver, drill);
- drills with a diameter of 0.4 cm;
- 4 rollers, 10 cm each;
- corners (as for fastening a bed);
- sanding sheets;
- varnish and paint to decorate the structure and protect it from damage.
For homemade sun loungers, it is better to use sheets of spruce or other coniferous tree. They resist moisture well and are not afraid of sudden temperature changes. These materials can be bought directly at construction centers or made to order from a cabinetmaker (carpenter).
Overall dimensions of the product and getting started
You can make a wooden chaise lounge in accordance with the dimensions of your body or according to the individual dimensions of future owners. Or you can stop at the standard size - 60x190 cm. Once the dimensions have been determined, you can start working:
- form the sidewalls from the beams and fold the structure frame, attaching the parts with corners;
- finish each outside finished frame with prepared boards;
- proceed with further assembly.
Stages of creation do-it-yourself sun lounger for the garden
- Make blanks for the legs of the product using bars of the required height. Usually their height is about 5-10 cm, but you can choose other sizes.
- At a distance of 5-7 cm from the edges of the long beams, secure the legs using long screws.
- Attach a roller to the center of each leg. To do this, you need to take shorter screws (about 3 cm in length).
- Using an electric jigsaw, start cutting the lattice pieces to create your DIY chaise lounge. The most suitable size for planks is 8x60 cm.
- Start screwing the slats to the sunbed frame, using special spacers to create ideal gaps (1-2 cm will be enough).
- After assembling the structure, it needs to be sanded and painted in a suitable color.
If you decide to make a folding chaise longue with your own hands, divide wooden grate into two parts, which can then be connected using ordinary door hinges. At the same time, it is important not to forget about an important detail - the fastening strip. It should rest on a stand secured with screws.
Below is a drawing for a slatted lounge chair:
Making a chaise lounge on a frame base using thick fabric
Another popular and in a simple way Making a chaise longue for a summer house with your own hands is a chaise lounge made of material on a frame. This is a light and comfortable summer cottage option that can be converted from a lounger to a chair and back with one movement of the hand.
You will need the following materials and tools:
- two wooden slats 0.25x0.6 cm of different lengths (120 cm, 110 cm, 620 cm);
- wooden slats 2x2 cm (65 cm - 1 pc., 2 pcs. 60 cm and 50 cm);
- high-quality dense material 2×0.5m;
- drill;
- bolts and nuts of suitable diameter;
- PVA glue;
- “zero” sandpaper;
- round file.
Choose a wear-resistant fabric that is not afraid of open sun rays and moisture. The ideal option would be jeans, canvas or tarpaulin. It is better to choose slats from oak, birch or beech (they have increased hardness and strength).
To make light sun loungers for your garden with your own hands, you need to prepare slats of the required length and sand them.
Assembly steps
- you need to drill holes suitable for the selected bolts on each long rail, always retreating 7-10 cm from their edges; all irregularities should be immediately sanded with a needle file until smooth surfaces are formed;
- at the head of the frame (indicated in figure “B”), several holes should be drilled at once for subsequent adjustment of the tilt of the seat back;
- to create a seat, you need to make two more holes at the ends of the long slats; their diameter must match the diameter of the prepared round slats (in this case - 2 cm); To make the slats hold tighter, you should lubricate their ends with PVA glue;
- combine structure “A” and “B” using screws passing through the upper holes, then combine the resulting module with element “B” in the same way;
- stretch the fabric by folding the edges over the crossbars and sewing several seams with strong threads (this procedure can be completed before the final assembly of the product, then you can sew the material using a regular sewing machine).
How to make a chaise lounge with your own hands even more comfortable?
To ensure additional comfort for your sun lounger, you should place a mattress on it. Take measurements of the finished structure, buy a sufficient amount of fabric and filling material. You can sew a mattress using any known method.
Now you can independently design a sun lounger for your summer cottage, without resorting to the help of specialists or the advice of friends. There is nothing difficult in this matter if you strictly follow the instructions and follow the information. Learn with us and improve your skills!
The summer season is approaching and it's time to think about creating a chaise lounge with your own hands. It will allow you to enjoy your outdoor recreation to the fullest.
Chaise longue in French means long chair. This is a chair for relaxing. It can, at the owner’s request, change the position of the backrest.
Sun loungers are widely used on beaches and by pools. On personal plots, dachas.
Sun loungers are made from various materials:
- wood;
- plastic;
- aluminum;
- rattan;
- PVC pipes;
- durable fabric.
Wooden sun loungers are the most popular and environmentally friendly. They come in a variety of shapes and designs. The disadvantage of monolithic wooden sun loungers is their weight. But this problem can be solved with the help of wheels.
Plastic sun loungers are characterized by easy mobility, ease of maintenance, and relatively low cost. Their minus is their fragility.
Fabric loungers are versatile and comfortable. Their frame is made of wood, metal or PVC pipes. They fold easily and do not take up much space.
Rattan sun loungers look great in the lap of nature. They are environmentally friendly. However, purchasing them is expensive. If you have sufficient skills, you can simply weave a rattan lounger yourself.
In this article we will tell you how to create wooden sun loungers with your own hands.
To ensure the longevity of the effort expended, the materials used must be processed.
Antiseptics and special impregnations will help protect wood from moisture, harmful insects, rot, and mold. It is better to carry out processing before assembling the structure.
After installing the sunbed, the wooden parts should be coated with primer, drying oil, varnish or paint. This will extend the life of your masterpiece.
Fabrics should also be protected from rain and sun. Water-repellent impregnations will help preserve their brightness and service. Their effect lasts 2-4 weeks.
And, of course, remember the famous Russian proverb when working. Measure seven times, cut once.
Monolithic chaise lounge made of wood
Solid models are heavy. Therefore, to make it easier to carry, wheels are added to the headboard. The following instructions will help you make a chaise lounge on wheels with your own hands.
You will need tools:
- electric jigsaw or hacksaw;
- drill;
- screwdriver;
- self-tapping screws;
- fine grain sandpaper;
- spirit level;
- roulette.
When choosing a tree, pay attention to coniferous species. They are sold at affordable prices and are characterized by increased water resistance.
Materials needed for a sun lounger:
- glued slab made of wood, its thickness should be 2 cm or more; at least 2 cm thick.
- boards 0.25 cm thick.
- wooden beam with a square section of 50x50 mm;
- 4 wheels with a diameter of 10cm;
- corners for strengthening the bed;
- door hinges;
- varnish or paint.
We suggest you make a chaise lounge according to this pattern.
Legend:
- Front legs.
- Hind legs.
- Bearing longitudinal.
- Back support.
- Back support.
- Bearing transverse.
- Fixing bar.
- Backrest support.
- Wheels.
- End beam.
- Back slats.
- Seat slats.
- The support beam is transverse.
- Fixing bar.
You can independently determine the size of the desired sun lounger and make calculations. Or use the standard size 60x190 cm. It is the most optimal and ergonomic for the average adult.
Assembling a chaise lounge on wheels
We assemble the base frame from the bars. We secure the load-bearing parts with corners similar to those that secure the base of the bed.
We sheathe the resulting frame with pre-prepared and sanded boards.
We make blanks for the legs from timber. Their height usually ranges from 5-10 cm. Choose one that is comfortable for yourself and your household.
We drill holes with a drill, retreating 5-7 cm from the ends of the longitudinal sides. We secure the legs with long bolts. We control the horizontal side with a spirit level.
We screw the wheels to the center of the legs with bolts with a diameter of 30mm.
Let's start cutting the lattice elements. Use a hacksaw or jigsaw to cut 8x60cm boards.
Using self-tapping screws and a screwdriver, screw the slats to the chaise lounge frame. Since the boards are not screwed tightly, we use spacers to obtain even gaps.
We should have two parts. The smaller one is intended for the headboard. We connect both grilles with door hinges. We install a support bar under the opening part.
All that remains is to sand off the production flaws. Apply wood primer. Paint it in your favorite color and the chaise longue with your own hands is ready.
For more comfortable rest You can sew additional mattresses that fit the size of the bed.
Simple sun lounger
To create a wooden chaise lounge with your own hands, you need the following materials, as well as tools:
- tape measure and square;
- pencil;
- saw;
- electric drill;
- screwdriver or screwdriver;
- screws, self-tapping screws and studs for fixation;
- sandpaper or grinder;
- wood putty;
- dye.
Wooden beams used in the work:
- for the back of the chaise lounge, take boards 5×10 with a length of 88 cm - 2 pieces, 39 cm - 3 pieces, 60 cm - 1 piece;
- 2 longitudinal bars for a frame 215 cm long;
- 2 cross beams-50 cm;
- 6 legs -35 cm;
- 13 slats for a seat measuring 2.5 x 8 x 60 cm;
- 6 slats for the back - 2.5? 8? 88 cm.
The first priority is to create a very strong frame. We take two parts 215 cm long, connect them with screws to half-meter transverse parts.
Let's move on to sitting. Take all the 60 cm slats. Attach them to the frame with self-tapping screws, leaving small gaps. To ensure that the gaps are even and uniform, use spacers 1 cm thick.
We create the legs of the lounger. To give maximum stability to the chaise longue, two legs are nailed at once at the legs. One at a time at the head. The instructions indicate bars with a height of 35 cm. But you can choose a height that is comfortable for you
We make the back from 2 boards measuring 88 cm and 3 boards measuring 39 cm. The resulting frame should easily fit into the base, leaving a small gap between the structures.
We securely fasten the longitudinal strips. We round them for a more beautiful look.
Attach the backrest to the base of the lounger. To do this, you need to drill holes at a distance of 9cm from the edge of the seat. Secure with pins.
We make 2 grooves at the base of the sun lounger for the support bars. The first 5x10 cm notch should be approximately 9 cm from the stud. The second is 20cm from the first. But its depth will be only 5x5 cm.
A 60cm beam is inserted horizontally into the first recess. To change the position, the board is transferred vertically to the second recess.
Sand all rough edges and imperfections. Process it. Cover with paint or varnish. The chaise lounge is ready with your own hands.
DIY garden lounger video
Fabric chaise lounge
A chair with a frame complemented with fabric is one of the most comfortable, budget types of chaise lounges. It is convenient to fold and easy to carry. Can be stored in flat view. It takes up little space.
To create a sun lounger with your own hands you will need:
- bolts, nuts with a diameter of 8 cm;
- small nails with round heads;
- sticks round section(1 piece -65cm, 2 pieces - 50cm, 2 pieces -60cm);
- rectangular bars 25x60cm thick (2 pieces 120cm, 100cm and 60cm long);
- needle file, fine-grain sandpaper;
- glue;
- durable material measuring 200 by 50 cm.
Choose materials carefully so that your work is not in vain. Hardwood blocks are perfect for a sun lounger. Choose:
- birch;
- oak;
- beech.
Choose fabrics with maximum strength. Great fit:
- teak for mattresses;
- tarpaulin;
- canvas;
- camouflage;
- denim
These materials have increased wear resistance and will last you a long time. Let's move on to creating a sun lounger with our own hands. The base consists of three frames:
- A.1200x600 mm.
- B.1100x550 mm.
- H.650x620 mm.
Cut the boards to the required length. We sand with sandpaper.
In the longitudinal bars we make indentations of 70 and 40 cm, and drill holes with a diameter of 8 mm with a drill, just like the bolts. Sand with a round file.
We make cutouts in part B. They will allow you to change the position of the back later. To do this, retreat 7-10 centimeters. It is necessary to cut 3 or 4 recesses. We polish well.
According to the diagram, we drill holes in the bars to connect the parts.
Assembling the base of the lounger. We connect frames A and B using screws. Then we connect frames A and B. For greater reliability, we lubricate the ends of the round slats with PVA before assembly. The frame of the sun lounger is ready.
Now you need to sew the seat. Place the material on the bed in the folded position. The fabric should be slightly stretched. Measure the desired length. Hem the edges. This way you will increase the wear resistance of the material. The chair will look neater.
We attach the fabric base to the lounger. We wrap round slats on parts A and B. We nail them with small nails with round heads. The chair is ready.
ADVICE. The edges of the fabric base can be made in the form of loops. In this case, the seat is simply strung on slats.
DIY fabric chaise lounge. Model 2
For this chair you will need:
- wooden slats measuring 2x4 cm. Two slats each with a length of 122cm, 112cm, 38cm. One piece each 61 cm, 65 cm, 57 cm. And four slats 60cm long;
- slats measuring 2x6 cm. One each 61 and 57 cm;
- 65cm wooden rod with a diameter of 1.2cm;
- a piece of fabric 137 cm long and 116 cm wide;
- bolts, washers, nuts, screws;
- glue;
- round needle file, sandpaper or grinder;
- electric drill.
Manufacturing process:
Process all the details of the future chair in advance. Sand them using a machine or fine-grained sandpaper. Cover with special impregnations that protect the wood from corrosion. Appreciate your work.
Pay attention to the drawing. The crossbars at the bottom of the legs help fix the position of the backrest. Make them. Or cuts, retreating from the edge by approximately 20, 25, 30 and 35 cm.
Drill holes for the bolts in the back frame. To do this, measure 41cm on each side.
On the seat frame, step back 43cm from the top. Make holes.
On the piece supporting the back, drill holes in the center of the edges.
Process all holes with a round file.
Model installation
First assemble the back frame. A beam 61 cm long will carry a large body load. Secure it as securely as possible. Leave a small gap between the two slats. The tissue will be fixed through it.
Assemble the seat. Fold it with the back frame. Be sure to place a washer between them. Bolt the frames together.
ADVICE. To prevent the nuts from loosening quickly, tighten an additional lock nut on top. For greater reliability, attach the nuts to glue, varnish or paint. First tighten the nut. Then loosen it slightly so that the parts rotate freely.
Install the back support piece using washers and bolts.
Sand away all imperfections. If desired, varnish or paint.
Fold the fabric in half, sew, retreating 1.5 centimeters from the edge. Turn it inside out. Fold the edge of the material for the rods that secure the panel between the slats. Sew.
Now insert the material between the slats. Secure with a rod. This installation model allows you to remove the fabric for washing without much effort.
Chaise lounge made of polyvinyl chloride
Another example of a lounger with a fabric base. Only in this case, wooden slats are replaced with PVC pipes. Chair sizes may vary.
In this do-it-yourself chaise lounge model we used:
- 2-inch polyvinyl chloride pipes;
- L-shaped connectors – 8 pieces;
- T-shaped connectors – 6 pieces.
Connect first for the vertical bar PVC pipes lengths 30 and 45cm using a T-connector. Place L-shaped connectors on the ends. Connect the second vertical in the same way.
Now you need to connect the two sides together. Please note that one horizontal crossbar is solid. Its length is 66cm. It is attached closer to the T-shaped connection, which in turn should be directed into the structure. The second side consists of two 30cm pipes, combined with a T-shaped adapter, turned at an angle of 45 degrees from the long side of the strip.
Don't rush. Measure pipes accurately. As a result, you should end up with a rectangular structure.
Now is the time to make the connection on which the seat will rotate. To do this, insert a 5cm long pipe into the T-shaped connector and secure it with another T-shaped adapter. It will become the basis of the horizontal frame.
Make the long sides similar to the vertical section, using 30 and 45 cm pipes with an L-shaped connector. For crossbars, use a solid tube 30cm long. And also consisting of 2 x 20 cm with a T-shaped adapter.
You did everything right if you get a rectangle within a rectangle.
The seat is located between a long section of the vertical section and a short section of the horizontal. Adjust the level of inclination that is comfortable for you. Measure the distance between the two free T-pieces. Cut the pipe to the required length. Insert the rear support.
Take measurements of the fabric consumption for your chair. Use thick fabric. For example, canvas, tarpaulin, jeans. Hem the edges and secure the fabric to the chaise lounge. Enjoy your holiday.
Portable lounge chair
The durable, lightweight chair is quickly assembled and disassembled. It is convenient to take it with you outdoors. The model is so easy to make that it is suitable even for novice craftsmen.
The collapsible chair consists of 2 parts:
- backrest covered with dense, wear-resistant fabric;
- wooden seat.
In addition to tools, the following materials are used:
- 2 legs for the backrest measuring 20x40x800mm;
- 2 legs for the seat - 20x40x560mm;
- 2 lower crossbars - 10x50x380mm;
- 1 top crossbar - 10x40x380mm;
- 1 seat crossbar - 20x40x300mm;
- 5 slats - 20x40x400mm;
- piece of material - 600x500mm.
The procedure for assembling a portable sun lounger is shown in the diagram.
First, the parts are connected using self-tapping screws and a screwdriver.
The workpiece is processed and varnished.
While the frame dries, the fabric is folded and stitched. Then it is nailed using staples and a construction stapler to a wooden piece.
We connect the back and seat of the chaise lounge.
Enjoying your holiday in your new armchair.
Pay attention to another interesting chaise lounge model in the video.
Kentucky chair
You can make the original look of a chaise lounge with your own hands. A sun lounger is assembled from bars. Convenient, easy to fold. Takes up minimal storage space.
For the chair you will need:
- 4mm galvanized wire;
- 16 staples;
- bars 30x55 mm.
Before starting assembly, it is recommended to treat the bars to protect them from ultraviolet rays and moisture. Choose an oil- and wax-based stain. Beitz is good. You can use parquet oil. Apply the product using a spray bottle or brush.
Kentucky chair installation
Drill the holes. Their diameter should be slightly wider than the thickness of the galvanized wire. Sand all rough spots and imperfections.
Fold the parts according to the photo and start stringing the boards onto the wire.
Secure it with brackets.
ADVICE. Instead of wire, use galvanized studs. They are secured with nuts and washers.
Raise the planks. The Kentucky chair is ready for use.
Original chaise lounge
Design Koalition has developed an unusual chaise lounge with a fabric canopy that will allow you to enjoy outdoor recreation even on a hot day, protecting you from the scorching sun. The cost of such a sun lounger is 5970 euros. We will tell you how to save money and make an original chaise lounge with your own hands.
To create a lounger you will need the following materials. And also tools:
- 2 sheets of plywood 2cm thick with a size of 160x180cm;
- 6 round strips with a diameter of 30mm and a length of 92cm;
- 12 planks made from leftover plywood measuring 94x10cm;
- dense fabric with a width of 92 cm;
- construction adhesive;
- screws;
- roulette;
- cardboard for layout;
- circular saw;
- electric drill.
Transfer the diagram onto cardboard or thick paper. To make the task easier, you can first draw it into squares of 10 by 10 cm. The template makes it easy to correct all the shortcomings on paper. Subsequently, you will only circle it 2 times. Or maybe you’ll get the hang of it and make a few chairs for relaxation.
We transfer the drawing onto sheets of plywood and cut out the side parts with a circular or band saw. At the junction with round beam cut out recesses with a diameter of 30mm.
We sand all the unevenness and cutting defects.
We assemble a rigid structure. Lubricate the ends of the beam with wood glue or PVA. We insert the timber into the recesses and fasten it with screws. The joints can be additionally treated with glue for maximum reliability.
Now you need to put the structure on its side. Place weights on the gluing areas. And let the chaise longue dry completely.
We begin to screw the planks to the ribs of the structure. At the same time, we make a 10-12 cm long indentation between them. Tighten the screws deeper so that their heads do not cling to the fabric and tear it.
We sand the product again. Now we hide the assembly flaws.
Use wood putty to hide all the screw heads in the places where the fabric is tensioned. We paint the chaise lounge.
You probably noticed that the description only gives the approximate width of the awning. The fact is that you can decide to cover the chaise lounge entirely with fabric, or just make a canopy. Decide for yourself. Measure the dimensions and sew the awning.
ADVICE. It is better to fasten the awning with ties or Velcro. This will allow you to remove the fabric at any time and wash it without problems.
Birch lounger
It must be said that our Russian craftsmen are distinguished by their ingenuity and creative approach. This chaise lounge is made by hand from birch logs. It is distinguished by Russian folk flavor. Perfect for garden plots.
The work uses:
- logs with a diameter of 75-120mm;
- drill and set of drills;
- electric saw;
- staples and screws;
- marker;
- electrical tape or chalk for drawing.
Let's start creating a sun lounger.
We saw the trunk into logs 45 cm long.
On the floor we draw a line for the future sunbed using chalk, or glue it with electrical tape.
We lay the logs according to the diagram. We drill holes with a drill and connect the logs using long self-tapping screws. We use a socket wrench for this.
Almost turning over finished product. We are testing. We eliminate shortcomings.
For greater stability, we fix the back side of the lounger with brackets.
A monolithic birch chaise lounge is ready to delight you and your guests.
Unusual do-it-yourself sunbed for a summer house
Pallet lounger
One of the most budget-friendly sun loungers is made with your own skillful hands from pallets. What is it? A pallet or pallet is a stand that is designed to transport cargo.
DIY pallet lounger video.
Now you have several options for making your own sun loungers. Choose a design that is convenient for you, or affordable. When choosing sizes, keep in mind that in addition to you, your wife and your children will also rest on the sunbed. Adjust the width and height to suit your overall needs.
Sun loungers are used in the country, suburban area, beach and other recreation areas. You can make a lounger with your own hands from various materials. The product will be unique and convenient, but for this it is worth choosing the material and technology.
Chaise lounge design
The compact chaise lounge is a light and simple bed that can be moved from place to place. The design assumes a slightly raised headboard, and the word “chaise lounge” is translated as “long chair.” This designation accurately characterizes the elongated seat that distinguishes the chaise longue. Furniture can also be folding or transformable, but a common option is a low chair-lounge with a raised back.
Species
The main parameter depending on which sun loungers are classified is the material. Wooden models that are easy to make yourself are in demand. Furniture can be simple, straight in shape, and bases that follow the contours of the body are very comfortable. Easy fixation of the back position, retractable shelves, comfortable armrests and stable legs make wooden chaise lounges comfortable and practical. The presence of wheels makes it easier to transport furniture. At the same time, wooden models are environmentally friendly, safe and durable.
Plastic models are distinguished by their affordable price, easy maintenance during use, convenience and versatility. The furniture is lightweight and the design options are varied. Simple sunbeds are affordable and optimal for a summer residence. Original designer models have more at a high price and good characteristics.
Wicker sun loungers have metal frame, on which a woven fabric is stretched. The frame may also have a fabric base. Such models often have a folding design and are characterized by mobility and convenience. To create wicker models, natural or synthetic wicker and rattan are used. In models with a fabric base, durable and high-quality fabric is used.
Depending on the type of construction, sun loungers are classified into several types. The hanging option is in demand. It includes posts and base. An umbrella can complement the set, but in any case the seating area is suspended from the posts. Therefore, the supporting elements must be as reliable as possible and are often made of metal.
Folding models are made from various materials: wood, plastic, wicker, metal with a fabric base. The products are convenient because they are easy to fold and transport. This allows you to remove furniture in bad weather, as well as conveniently store the chaise longue. All rotating mechanisms designs are reliable and safe.
The lounge chair is convenient because it allows you to sit as comfortably as possible, but without being in a “lying” position. The seat can be transformed, lengthening or shortening if necessary. The chairs can be folding or regular. The furniture is comfortable both inside the living space and in the country house or near the pool.
Photo gallery: options
Comfortable sun loungers are varied and different appearance, which plays an important role in the selection. Photos of furniture allow you to determine the desired option.
The original base makes the chaise lounge unusual and stylish. The chaise lounge-ottoman is best installed indoors Hanging models have an unusual appearance. The chaise lounge-ottoman is optimal near the pool. The rocking chair provides comfort. The double curved chaise lounge is comfortable, but takes up a lot of space. Suspended options are reliable.
Scheme and dimensions
When created, you can make a sun lounger standard size, which is 60x190 cm. Individual parameters are determined depending on the weight and dimensions of the user. After determining the size of the product, you need to develop a design drawing, taking into account the type of product. For example, it’s easy to make a wooden chaise longue with your own hands, and the drawing includes images of all elements indicating the dimensions, as well as holes for their fastening.
The drawing of a product made from other materials is carried out according to the same principle, that is, taking into account the parameters of each part. In this case, it is worth paying attention to the design of the supporting elements, which should be as reliable as possible. For example, for a chaise lounge made of round or profile pipes The diameter of the pipes should be indicated on the diagram. Each fastening and hole, moving mechanisms are also reflected in the drawing.
Suitable material
You can make a chaise lounge not only from new material, but also from available materials. The table shows popular material options and also reflects their advantages and disadvantages.
| Material | Pros | Cons | Features of use |
| Wooden pallets | Ease of use, affordable price, simple processing and operation, reliability designs | The need to choose the right size pallets, the fragility of poorly processed products, you can’t leave a deck chair outside in bad weather | For work you need small pallets of the same size, which should be sanded and painted. |
| Folding bed frame | Simple installation, easy transportation, compactness and easy assembly | Need to choose a frame suitable size and durable fabric, the product cannot be left outside in the rain or scorching sun | The finished folding bed frame is covered with durable fabric; if necessary, the frame can be remade. |
| Wooden boards | Environmental friendliness and durability, easy installation, the ability to create various designs and their upholstery with any materials | Careful wood treatment is required; the chaise longue should not be stored outdoors | According to the drawing, boards and blocks are cut, which are connected into in the right places. The product needs to be sanded and painted |
| Bent pipes | Reliability and durability of the design, the ability to create a sun lounger of any shape, practicality and resistance to various influences | To create a lounger you need a pipe bending machine, it is important to follow the drawing parameters, metal processing is required | Round pipes are cut to size, treated with an anti-corrosion compound, bent and fastened according to the drawing |
| Metal | Durability and practicality, reliability and easy assembly, the ability to create various designs | Careful processing is required, it is important to select the optimal metal elements | Parts are cut from profile, round pipes, strips, which are treated with an anti-corrosion compound and fastened according to the drawing |
Principles of material selection
Wooden boards and bars serve as a good base for a sun lounger. For work, you should select dry elements, without holes and knots, without rotten areas. The comfort and durability of a sun lounger depends on the quality of the material. It is also important to take into account the parameters of the furniture, that is, the thickness and length of each part. Cutting large boards can be done either manually or using carpentry equipment.
An original solution is a chaise longue made of polyurethane or plastic pipes, which are used in organizing water supply. For furniture, elements with an outer diameter of 25 mm or more are best suited. This will allow you to make a reliable lounger. To connect pipes, a special soldering apparatus and various angles and adapters are used.
Metal round pipes differ complex processing. To create a sun lounger, they need to be bent very carefully, and the elements are connected with bolts. The diameter of the pipes must be at least 20–25 mm. For aluminum parts this figure is increasing.
When choosing any material, it is important to pay attention to its quality. Surface defects, heterogeneous structure, dents indicate low quality. Such material will not allow you to easily make a chaise longue for your garden with your own hands. Therefore, boards or pipes must be new, smooth and reliable.
Determining the amount of material
The amount of material required for work is calculated depending on the size of the furniture. Therefore, you first need to make a drawing that shows all the components of the structure and indicates their dimensions. It is important to take into account the thickness or diameter of the elements. For example, to create a chaise lounge from wood, you should take bars and boards with a reserve, since during the work you may need additional material. Self-tapping screws, rotating mechanisms and other types of fastening should be selected with a small margin.
Tools
To make a wooden chaise longue you need simple tools, which even a novice master can use. These are the following:
- sheets or sandpaper for sanding wooden surfaces;
- tape measure and building level;
- large and medium sized screws;
- screwdriver, jigsaw;
- brush, varnish or paint.
In the process of work they use wooden glued board and bars, drills of different thicknesses, several roller mechanisms, metal corners. The bars should be sawn in advance according to the drawing, which will significantly speed up the process of assembling the sun lounger.
DIY chaise lounge made of wood: photos, drawings and progress of work
Before starting work, you need to prepare a drawing, tools and materials, and cut the bars. The procedure is as follows:
- The prepared beams are fastened according to the drawing, but holes for screws must first be made in them. The beams are connected to each other using metal corners, which are used when assembling beds. Then the bars for the legs are prepared, the height of which is often 5–10 cm. The legs are fixed at a short distance from the edges of the frame, and this requires long screws;
- A roller is attached to each leg, and for this, screws up to 5 cm long are used. After preparing the frame, planks should be made. To do this, cut with a jigsaw thin planks, the size of which is 8x60 cm. Next, the planks need to be screwed to the frame, creating a lattice. The distance between the slats must be at least 1 cm;
- You need to connect the elements of the sun lounger using rollers. Next, the structure is treated with antifungal compounds and covered with varnish or paint;
- The result is a folding, comfortable chaise lounge. The furniture is optimal for a summer cottage or vacation, as it is practical to use and compact to store.
Chaise lounge finishing
A wooden lounger or folding chaise lounge does not require special finishing, but sanding and varnishing are required. This is due to the fact that wood of any species easily absorbs moisture and dirt. This leads to loss of appearance of the furniture. For grinding wooden furniture Use medium or fine sandpaper. The surfaces and corners of the bars are processed manually in a circular motion. Next, the furniture is covered protective agent for wood, and after it dries, paint or varnish is applied with a brush.
A chaise longue in a garden plot is an important furniture attribute, which is suitable for a useful and comfortable pastime, and also adds a special originality to the design. local area. Made from natural materials The product can be placed both in a sunny area and in the shade, but in any case it will fit harmoniously into the home interior.
Do-it-yourself wooden sun loungers for a summer residence have a number of distinctive characteristics and advantages, thanks to which this piece of furniture has gained popularity. Among the main advantages of its use are the following:
- the design features of the chaise lounge, the structure of its back, armrests and seat allow a person to comfortably be in a semi-lying or semi-sitting state, which contributes to greater relaxation;
- Possibility of use for sunbathing;
- due to the lightness of the material and simplicity of design, the chaise lounge is quite portable and can be moved from place to place;
- a folding chaise longue with your own hands can be used as a bench for relaxation;
- has small dimensions when folded, which facilitates its storage;
- wooden sun loungers are famous for their durability and endurance in use;
- has high aesthetic appeal.
Types of country lounge chairs
Depending on the design features, the chaise lounge chair is conventionally divided into several types:
- Monolithic products– these are chairs in which all components are interconnected during manufacturing and cannot be disassembled. These sun loungers have good performance strength, endurance and can withstand heavy loads. However, when using such a piece of furniture, certain inconveniences may arise. For example, in such a product it is impossible to change the angle of the backrest, it cannot be folded, due to which moving from place to place will be problematic.
- Monolithic chair with inserts. This type of DIY chaise lounge made of wood has a decorative appeal. The presence of additional fragments made of different materials will reduce strength and reliability, but this will make the chair more aesthetically pleasing and neat.
- Portable sun lounger. The design of such a product provides for a mechanism through which you can quickly and easily change the position and overall configuration of the chair. You can change the angle of the footrest, headrest or backrest. In addition, a folding lounge chair can be transformed into a compact cargo and taken with you when traveling out of town.
- Armchair on a metal base. It is somewhat more difficult to make such a chaise lounge with your own hands from a photo, and you often buy a ready-made product. It is distinguished by the presence of an aluminum or steel frame on which a fabric sheet is attached. The advantage of the chair is its light weight, compactness, resistance to dirt and mobility.
Standard chaise longue: manufacturing guide
Put it on your summer cottage multifunctional and decorative furniture simple enough. To make a chaise lounge with your own hands, you will need drawings. You need to put in a little diligence and physical labor, and as a result you will get reliable design for leisure activities.
Crafting tools
- saw;
- self-tapping screws;
- wood putty;
- roulette;
- sandpaper;
- marker;
- paint of the desired color;
- drill;
- square
Materials for product processing
- wooden boards 400x2.5x8 cm – 4 pcs.;
- wooden blocks 400x5x10 cm - 3 pcs.;
- pins for fixation – 2 pcs.
Instructions for making a sun lounger
1. The primary task is to build a reliable frame. To do this you will need to make 4 parts from wooden beam: 2 longitudinal 215 cm and 2 transverse 50 cm long.
2. Let's start making the seat. To do this, you need to take a board and cut it into uniform bars 60 cm long. The design will require 13 such fragments.
3. Using self-tapping screws, we fix these sections to the frame of the sun lounger so that there is a distance of 1 cm between them.
4. We make legs for the future structure. To give greater stability, in the seating area you need to make double supports 35 cm long. We make them from a block. To the side of the headboard, it is enough to attach single legs with a similar length.
5. We construct the back of the product. To make the frame, we prepare 2 parts 88 cm long, 3 parts 39 cm long. These dimensions must be observed so that the frame can fit into the main structure. In this case, small gaps should remain on all sides.
6. In the direction of the length of the product, you need to fix the boards on the back frame. To make the appearance more aesthetic, the top edge of the boards should be rounded.
7. We attach the backrest to the base of the chaise lounge so that it can easily change the raised and lowered position. To do this, you need to make holes at a distance of 9 cm from the edge of the seat. The grooves must be through and pass freely through both structures.
8. We fix the structure on both sides of the product with pins.
9. We make two grooves in the base of the sun lounger, where the support bars will be placed. This will allow you to hold the back of the product in different positions. One notch 5x10 cm should be made at a distance of 9 cm from the stud. The second groove is made 20 cm from the first, but with a slot size of 5x5 cm.
10. A support beam 60 cm long should be placed horizontally in the first groove. This will allow the backrest to rest on it and maintain a semi-sitting position.
11. To change the angle of inclination and make a reclining position, you need to remove the first beam and put a board in the second groove, only vertically.
12. Making your own sun lounger is almost complete. All that remains is to complete the final finishing of the structure by sanding and painting.
Manufacturing Guide garden sun lounger do it yourself in the video you can see here:
The original country chaise lounge: a step-by-step guide
An extraordinary chaise lounge for a garden plot is not only a beautiful piece of furniture, but also a suitable way to recycle wood. Its advantage is that it is environmentally friendly, harmonizes with the countryside exterior and does not require additional decorative processing. And for a comfortable position of the body, you can cover it with a warm blanket or pillows.
Tools and materials for processing
- Round logs with a diameter of 75-120 mm.
- 18 V chainsaw.
- Cordless drill.
- Impact wrench 18 V.
- Screws.
- Deck screws and brackets.
- Drill.
Important! These sizes of logs are considered optimal, since they are easy to drill and the chaise longue will be light in weight.
Manufacturing instructions
- Initially, you need to prepare fragments from the log, each 45 cm long.
- Then you should create a layout for the future chaise lounge. To do this, use electrical tape that can be used to mark an outline on the floor.
3. Use a drill to make holes in the cut logs. These grooves will allow you to use shorter screws in the future.
4. Fasten all the pieces of wood together one by one. To do this, you can use a socket wrench and a cordless drill. You need to screw 4 screws into each log.
5. Turn the structure over and do the first test: sit, lie on it to see where it swings. In these places you can add another fragment for stability.
6. At the back of the lounge chair, fix the deck screws and steel brackets to make the structure more rigid and durable.
Ready! Construction work completed. Despite some difficulties and troubles of the process, as a result you get an original chaise lounge, which will become a useful and beautiful attribute of your summer cottage.
Examples extraordinary ideas How to make a sun lounger can be seen in the video:
It’s quite easy to make a sun lounger or deck chair with your own hands. Such a homemade, simple garden accessory is not only functional, but will also become a real decoration of the local area. These unique folding beds differ not only in size, but also in appearance.
Sun loungers and deck chairs for the garden: main types
Chaise longue is a popular folding lightweight chair for relaxing in a reclining position. Such beach structures are easily transformed. A simple wooden accessory can become a great option not only for the beach and outdoor pools, but quite often used as garden furniture , replacing a comfortable and practical chair with open verandas or terraces. There is both an adult and children's version a sun lounger made from solid wood, durable plastic, durable aluminum or synthetic fabric.
Depending on the design characteristics, There is the following conditional classification of such products:
- monolithic chairs, represented by components fixedly connected to each other, with high level strength and designed to withstand significant loads. The special feature is safety. The disadvantages include the inability to fold the structure and make changes to the angle of the backrest, which complicates the process of storage and transportation;
- monolithic chairs with special inserts, characterized by very high levels of decorativeness. They have additional fragments made of various materials, which can negatively affect the level of reliability and strength of such a structure;
- portable models , characterized by the presence of special mechanisms, make it easy and simple, without much hassle, to change the position of such a chair for relaxation. There is also an excellent opportunity to change the angle of inclination on the footrest and headrest. The folding model is very compact and suitable for transportation in a regular car.
Types of sun loungers (video)
Models with metal base They are extremely rarely performed independently and are distinguished by the presence of aluminum or steel frames with fixed durable fabric panels. The advantages of such chairs include low weight and mobility., as well as a high degree of comfort during operation. Among other things, modern materials are characterized by a high level of resistance to various adverse conditions. external factors, as well as pollution that can be obtained during operation.
How to make a wooden sun lounger with your own hands: drawings and stages of work
Drawings and diagrams for manufacturing a wooden deck chair are presented in large quantities, but to perform such a design yourself, you can also use a simple step by step instructions.
Master class on making a Kentucky chair
A very original model is the Kentucky version, entirely assembled from wooden blocks. This chair can be folded and is very convenient to store. For self-production you will need to purchase:
- galvanized wire with a diameter of 0.4 cm;
- sixteen galvanized staples;
- hammer and wire cutters;
- fine-grained sandpaper;
- bars wooden sizes 50x33 mm;
- antiseptic composition and wood varnish, as well as a brush.
It is not difficult to assemble the structure yourself. Holes are drilled in the bars with a diameter one and a half millimeters larger than the thickness of the wire used. If necessary, you can replace the staples and wire with galvanized studs, the edges of which are secured with nuts and washers.
A simple option for making your own wooden sun lounger
This option is easy to manufacture, but quite bulky and does not allow you to change the position of the backrest. Before you start making your own, you need to decide on the dimensions of the structure. The optimal length of a sunbed is considered to be two meters with a width of 0.6 m.
The main stages of making a wooden sun lounger model are as follows:
- manufacturing a frame base for a sun lounger from four sidewalls, a pair of which are two meters long, and two of which are 60 cm long;
- covering the outer part of the frame with sanded boards, 2.5 cm wide;
- fixing four legs on the long sidewalls with a distance of 80 mm from the edge of the structure using galvanized self-tapping screws;
- It is best to use stable wooden blocks 100 mm long to make the legs of the lounger.
At the next stage, the grate is assembled, which represents the main part of the outdoor lounger. Using electric wooden slabs it is necessary to cut boards measuring 10x60 cm. All jagged and rough surfaces on wooden workpieces must be removed using fine sandpaper. The finished boards are fixed using galvanized screws onto the frame base of the sun lounger and with a gap of one and a half centimeters, which will allow you to obtain a comfortable and attractive product.
Models with a comfortable adjustable back are somewhat less common. In this case, the lattice should be divided into a pair of parts, one of which is used directly as a lounger, and the other part serves as a comfortable headboard. The two parts are installed on connecting boards, and standard door hinges are used to fasten the lattice elements required sizes. To fix the headboard in a certain position, a transverse bar is used, which is installed on the inner edge of the frame base of the structure. The headboard support post is attached to such a bar using galvanized self-tapping screws. The finished structure must be thoroughly sanded, and then the surface must be coated with drying oil-based compounds or special varnishes.
How to make a sun lounger from solid wood (video)
How to make a folding fabric chaise lounge with your own hands
One of the most convenient and easy to use self-production options are represented by a fabric seat on a frame base. This model is quite mobile and can be transported from place to place, and can also be easily folded to an almost flat state. The following materials are used in production:
- furniture bolts and nuts D-8mm;
- two round wooden slats 65 cm long;
- two round wooden slats 50 cm long;
- slats rectangular section 65 cm long with a cross section of 25x60 mm;
- a piece of durable and water-repellent fabric measuring 200 x 50 cm.
You will also need to purchase a round file and fine-grained sandpaper, as well as PVC glue. Experts recommend giving preference to slats made from wood species such as oak or birch. As a durable and reliable fabric, we use types that are maximally resistant to abrasion and characterized by increased strength indicators. Mattress teak, as well as tarpaulin, denim and camouflage fabric, and canvas have proven themselves to be the best.
Manufacturing technology of a folding fabric model:
- cutting slats of standard length and thoroughly sanding their surface with sandpaper;
- holes are drilled at a distance of 0.7 and 0.4 m from the corners, after which they are polished with a round needle file;
- In order for the position of the backrest to change during operation, three or four cutouts must be made with a distance of 8.0 cm;
- With a sufficient distance from the two ends of the wooden slats, holes are drilled for arranging the seat;
- The end part of the round wooden slats is greased with PVA glue and installed in the drilled holes.
The assembly of the frame ends with the installation of a fabric seat. The seat is sewn after measuring the finished frame. The crossbars are wrapped around the cut edge and secured using standard furniture nails. Loop fastening of the fabric seat to the crossbars is also allowed.
Buying a ready-made sun lounger: characteristics of types and selection criteria
Today, a chaise longue is a very popular and in demand product, mainly as comfortable and beautiful garden furniture. All modern sun loungers or deck chairs are divided according to the material used in the manufacturing process. A significant number of models are made from reliable and high-quality plastic, but there are also products made from processed wood and modern metals.Various combined models are especially popular, in which the frame base is made of wood or steel pipes, and the seat is made of wood or fabrics. Some loungers have wicker parts based on artificial or natural fiber.
Factory products made from modern plastics of different colors are resistant to negative external influence, including ultraviolet radiation, precipitation and wind. Wooden factory products are characterized by surfaces that have undergone a three-stage treatment, represented by priming, subsequent painting and decorative finishing, which allows you to use such a lounge chair in conditions high humidity, under open air.
All manufactured products are divided into folding and non-folding models. and also have a raised or lowered footboard and headboard. As a rule, the position of the backrest is changed using grooves located on load-bearing frame. For example, the Lucca chaise longue from a German manufacturer is made of aluminum and modern textiles, and the position of the backrest can be adjusted without getting up from your seat by loosening the locking levers located in the access area.
IN recent years Country property owners are increasingly giving preference to a comfortable and very original type of chaise lounge - the Duchesse Breeze. This modern model is a design represented by a very roomy and deep chair, with a comfortable attached stool, which can be placed next to the main part or secured by fastening. The lounger can be folding, transforming into comfortable chair or a chair that is convenient for transportation. The most modern models have a raised and lowered footrest, as well as a retractable sun screen, transformable armrests, and spacious compartments for storing various accessories.
How to make a sun lounger from a barrel (video)
Wooden sun loungers or deck chairs are not only very comfortable for summer holidays, but can certainly decorate any garden territory. Despite the fact that the cost of such a product is quite affordable, in recent years, country property owners are increasingly making sun loungers themselves, which allows them to get a bright and stylish, very individual and durable design with minimal costs time and effort.