Decorate the kitchen set with your own hands. New life for an old kitchen: recommendations from a furniture maker. Decoupage is very easy to do

If your kitchen furniture is intact, but is already pretty tired, then do not rush to spend money and buy a new set. You can do it easier - update the kitchen facade with your own hands. At first glance, this may seem like a very complicated procedure. But, following all the rules and showing all your accuracy, the restoration of kitchen facades will take place quickly and as efficiently as possible.

Before you start updating your kitchen facades with your own hands, you need to prepare all the necessary tools and materials. In order for the work to be successful, you will need:

tool set;
doors for furniture or components for their manufacture;
loops;
pens;
dowels and screws;

Important to consider: Even if you don’t use some tools while working, they should be ready so that you don’t have to waste time looking for them later.

Accessories for facades

No kitchen furniture is complete without fittings, the quality of which determines the life of the furniture. That is why you should not save on accessories. And if you are planning to update your kitchen facades, then you will need:

loops;
pens;
locks;
towel rail;
plate stands;
dish dryer;
corners;
linings for cladding;

Carrying out repairs or renovations kitchen furniture, try to select fittings so that all elements match the same style.

Materials for replacing facades

If you do not have carpentry skills, and you do not know how to update kitchen facades with your own hands, then you can purchase already finished goods or made to individual sizes in special workshops. It is important to take accurate measurements from old furniture, and having previously purchased the material.

Best to use:

tree;

Wood is considered the most preferred material for those purposes when it is necessary to update kitchen facades with your own hands. This material is distinguished by its strength, durability, environmental friendliness, and has a solid appearance.

MDF is a board made from wood fibers coniferous trees, obtained by pressing under high pressure and temperature. When repairing a kitchen unit and trying to update its facades with your own hands, MDF can become indispensable assistants. This material is unpretentious in work, and its quality is always at its best.

Facade replacement process

The process of replacing wooden or MDF facades consists of several stages:

You should dismantle the old doors with your own hands, then take their dimensions. We also carefully dismantle drawers;
It is necessary to select fittings and make new facades using materials such as MDF or wood;
Installation of fittings on new doors;
Installation of doors on hinges;
Installation of other accessories.

Updating facades with paint

You can update the facades of kitchen furniture using a method such as painting. This method of repairing old kitchen furniture can be called the simplest, but radical.

It is important to remember that painting facades is only suitable if wood covering or the MDF coating is kept in good condition.

When repairing old furniture in the kitchen, using painting, you cannot do without the following materials:

paint (this can be enamel, acrylic or car spray);
solvent;
sandpaper;
accessories;
tool;

Before repairing facades using a method such as painting, you must:

Remove the doors and unscrew their hinges.
Next, you should thoroughly wash the removed facades and degrease them with a special solvent.
After the facade is dry and degreased, you need to clean all surfaces with sandpaper yourself.
Remove the resulting dust and degrease the surface again.
And only after this can you update the facade with paint, starting to paint over hard-to-reach places, smoothly moving to smooth surfaces.

After the facade repair is completed and the paint has dried, you can begin decorating. You can use a stencil to apply the pattern. You can also use plant leaves by first opening them with varnish. Such accessories, by the way, will look great on furniture made of wood or MDF.

After all work on updating the facade is completed, you can screw the fittings into place and install the doors in place.

Pasting with film

If you are planning to update the facade of your kitchen, you can use self-adhesive film. Such material is available, has good characteristics, and its range is amazing.

Stages of work:

Before you start gluing, remove the facades and lay them on a horizontal surface;
Remove all fittings;
Next, you should wash the facades well with soda or soap;
Wipe dry and degrease;
After this you can start cutting necessary elements from self-adhesive film, having previously decided on its color;
The cut out elements are laid face up on the facade and lifted from one edge;
The paper backing must be peeled off and applied to the surface of the facade, gradually removing the paper from underneath;
The film must be leveled using a spatula or a simple clean cloth, moving it from the center to the sides;

If small bubbles form during the process of gluing the facades, they can be pierced with a needle. If they are large, it is better to cut them with a cutter and smooth them out.

Rattan façade finishing

Rattan can add a feeling of warmth and comfort to your kitchen interior. The most important thing in the process of decorating facades with rattan is to choose the right color that will match the rest of the style.

Do-it-yourself finishing of kitchen facades with rattan involves the following steps:

The linen is placed in the bathroom, where it is thoroughly watered cold water. In this state, the rattan should be left for 30 minutes so that the fibers swell and increase in size;
Cooking decorative strips, which will press the rattan to the door. Don't forget about color scheme, which should correspond to the overall picture;
The rattan is spread on the table and cuts are made on the canvas with sharp scissors along the marks;
Using special clips, the rattan pattern is attached to the door. The paper clips will not be visible, since they are then covered with a decorative frame;
The corners of the slats should be filed at 45 degrees. The saw cuts are cleaned and varnished;
Attach the slats around the perimeter of the rattan, covering the staples.

Inexpensive renovation of the kitchen facade (video)

Updating or replacing facades has recently become increasingly popular. People understand that the appearance of their kitchen largely depends on the facades. And by using some techniques for updating kitchen facades, they have a great opportunity to show all their imagination and independently make changes to the interior of their kitchen.

Is your kitchen set worn out and lost, but you don’t have the money to buy a new one? Don't despair better than furniture with your own hands. Before you begin the process, carefully inspect the furniture for breakages and damage. Think about whether there is any point in restoration, because it will be too expensive to update furniture made from low-quality material with your own hands. In some cases, its cost is equal to the price of a new set. repaired several times. And if the restoration goes wrong, don’t despair, it’s quite possible that you’ll end up with a completely new-looking kitchen. Technologies and ideas for remodeling furniture with your own hands will help you correctly carry out independent restoration work and at the same time show your imagination. In this article you will learn how.

Renovated kitchen, but looks like new

Decorative ways to update an old set

If there is no significant damage to the furniture, and only scratches or stains appear in some places, put off repairing the kitchen set yourself until better times. Here you can get by with decor. For these purposes, vinyl stickers or decoupage are used.

Vinyl stickers will help hide a crack in furniture in a few minutes and at the same time give it new look. , are presented in a large assortment, are easy to clean and can withstand temperature changes. If you want such stickers to last for a long time, purchase only certified products.

─ no less popular option. Select the image you will transfer. Use the top layer of napkins with a pattern. Degrease the surface, then apply decoupage glue in the required place and press the image onto it. Once the glue has dried, apply acrylic varnish.

DIY furniture reconstruction methods

Like any other furniture, it can be cosmetically tidied up by applying, painting, or varnishing with clear or tinted varnish. Considering that the furniture in the kitchen is used intensively, and the climate in the catering unit is aggressive, the materials used must be resistant to temperature changes, high humidity, exposure to chemicals (varnishes, paints, films), and also environmentally friendly, because most surfaces in the kitchen come into contact with food. Let's consider these methods in more detail.

The film is cheap, but very practical in everything

We are restoring a kitchen made of chipboard

The two previous methods are used for minor damage; in other cases, serious action cannot be avoided.

It is worthwhile to dwell on the repair of chipboards yourself. After all kitchen set made from this material is popular due to its availability. Let's look at common damage and how to fix it:

Chips. Using a chisel, the edges of the chips are leveled and filled with molten wax. Unnecessary wax is cut off, giving the required angle to the surface. Next, using a special felt-tip pen, the texture is restored and opened with varnish;
Scratches can be removed by applying furniture wax to them. As in the previous paragraph, the texture is leveled and fixed with varnish;
Scuffs are eliminated with a piece of microfiber cloth, which is moistened identical to the surface. Spoil the damage lengthwise, then apply varnish;
Cracks. Fill the crack with PVA glue. It is more convenient to do this with a syringe and needle. Place a clamp on the side of the crack and pull it off. Wipe off excess glue with a cloth and leave to dry for a day;
It is better to replace the torn edge. To do this, a new laminating edge is placed on the end and smoothed on top with an iron.

Self-adhesive film for finishing kitchen furniture

The stores are very large selection films - no problems finding them

DIY furniture is often used. Basically, it is used to paste over the facade of furniture. Before gluing the film, prepare the surfaces. For convenience, remove the facades and fittings. Wipe the surface thoroughly with sandpaper, degrease and, if possible, prime. Take the necessary measurements from the facade.

To apply self-adhesive film without bubbles, follow the instructions:

Cut the film according to the dimensions obtained. This is easy to do thanks to the centimeter scale on the back. Don't forget about 2 cm wide allowances;
Peel off 5─10 cm protective film and slowly press the decorative layer to the facade, smooth it with your hand or a special scraper from the middle to the edge;
Continue unwinding the film onto the furniture and gluing it in small areas;
If it turns out uneven, tear it off and re-glue it.

It’s not always possible to do everything correctly, even if you follow the instructions. If the furniture does not lie tightly, bubbles appear, despite all efforts, try smoothing them towards the edge, piercing them or cutting them in the center. After this, release the air.

When repairing kitchen furniture, mirror self-adhesive film is also used. It has high moisture resistance, tolerates temperature changes well, is easy to care for, and is scratch-resistant.

We paint kitchen facades correctly

The painting method is used not only when restoring furniture, but also when changing the style of the kitchen.

The advantage of painted facades is that by changing the design you can easily repaint them in the desired color

Painting old furniture with your own hands is easy:

Remove the facades, then unfasten the fittings and decorative elements from them. If there are glass inserts, remove them or cover them with film;
Clean all elements intended for painting thoroughly from dust and dirt, then degrease;
If there are deep damages on the surface, putty them;
Apply a primer suitable for the façade twice;
Before using spray paint, protect all surfaces that may come into contact with it. Pick up the can and shake for half a minute. Apply the paint slowly, maintaining a distance of 20-30 cm. After the first layer has dried, apply one or two more. You can use a roller or brush for painting. And even better, both. For hard to reach places A brush will do; in other cases, a roller will do. Don't add too much paint, otherwise it will run;
When the façade is completely dry, coat it with varnish. Depending on what you want the surface to look like, choose a glossy or matte varnish. It will highlight the color and protect
Let the varnish layer dry. Attach the fittings to the facade and install it in place.

Varnishing of kitchen facades and countertops

You can restore old furniture with your own hands using varnishing. First, we will look at the main stages that make up this process, and later we will focus on the repair of specific kitchen furniture.

The glitter polish looks great

You can update old wooden furniture using varnish like this:

Unfasten the kitchen facades and countertops, free them from fittings. If there are glass inserts, seal them with tape.
Completely remove the old varnish layer using sandpaper. Shake off the dust or remove with a vacuum cleaner, then wipe the surface damp cloth and wait until it dries completely.
Spread the primer evenly and let it dry.
Apply a thin layer of varnish. If you are going to refresh your furniture, take a clear varnish, and to change its color, purchase a colored one. After drying, apply several more layers. Mahogany furniture can be finished with stain instead of varnish.

Advice! The glue is quite toxic, so restoration of furniture using it should be carried out outside an enclosed space.

Features of self-repair of basic kitchen elements

Repair of a kitchen set is not limited to the facade; other elements are also subject to restoration.

Restoring chairs with your own hands is quite possible, the main thing is to put in a little effort and use your imagination. First, get rid of the old topcoat. Soft upholstery remove using a hammer and screwdriver. Let's begin the hardest part of the job - removing the coating. Sand the surface thoroughly. To make work easier, moisten it with water from a spray bottle. The old varnish will become viscous. After drying, go through it again with fine sandpaper.

It's easy to update your headset yourself

Subsequent actions depend on your imagination and capabilities. Cover the surface with primer, and then paint or apply varnish in two layers. Choose contrasting seat upholstery. Remove the old one along with the foam rubber. Cut the upholstery fabric with extra room for hems. Cut out new foam rubber according to the old measurements. To fasten the parts together, use a furniture stapler. Place the seat in place and screw it on.

You can restore a chair even more in a simple way. It is enough to sew a cover for it, decorating decorative elements. Select the fabric based on your preferences. It’s better to sew several sets of covers ─ for every day and for festive moments.

Tabletop working area wears out faster than other elements of the kitchen set. The following methods of restoration are used:

varnishing;
painting;
decoupage;
pasting with film for furniture;
tile finishing.

We have already talked about the first 4 methods. Let's focus on the latter. To work, you will need ceramic tiles and glue, which is applied to the countertop in small areas. Press the tile to the surface and hold for about a minute. When finished, carefully sand the seams.

No less susceptible to damage. Update old table It’s not difficult to do it yourself. If the tabletop is made of wood, restoration is carried out by painting or varnishing. The polished table can be painted or decoupaged.

WATCH THE VIDEO

Repairing kitchen furniture is not limited to the methods considered. In fact there are more of them. But this knowledge is enough to give new life to old furniture with your own hands.

Your repost will change the Internet :)

Long-term use of the kitchen sooner or later makes itself felt: no matter how high-quality the set is, over time it loses its seasoned appearance. And then you have to choose: buy a new set or update the kitchen with minimal costs. Many people opt for the second option, namely updating the facades using a special film.

Kitchen before:

Kitchen in intermediate state: buy new or update facades?

On the right you can see traces of glue - the consequences of an attempt to repair the set.

Options for "new things"

Since the set itself is not yet falling apart, it is necessary to update the facades. This will benefit both the appearance and protect the material from moisture. There are two options for updating facades:

Ready-made self-adhesive film
Individual photo printing on adhesive paper

The owner of this kitchen settled on the second option, after which he indulged in thinking about the topic of photo printing. The original version with a separate picture for each door was rejected: general view it will turn out too motley. After some more thought, it was decided to choose a print with nature, “breaking” it with an apron would not affect the perception of the picture.

When searching for a suitable print, the picture should be selected with the maximum resolution - only in this case it will not be blurry.

Let's get started

The kitchen owner used a fairly simple method: he searched for pictures using the word “nature” with a resolution of at least 40 megapixels.

This option turned out to be the most suitable, but with minor amendments: it was decided to remove the huge butterfly. This is roughly what the print should have looked like in the kitchen.

A sketch was made in a photo editing program to visually understand what would be lost from the drawing. The butterfly has been replaced with grass.

With this picture you can safely go to an advertising agency. The print was chosen with lamination so that after updating the facades they could be washed.

It is necessary to print in a slightly enlarged size so that you can paste over the ends and wrap the film inside.

After this, you can proceed directly to pasting the facades:

Knowing the dimensions of the door, you need to add 1-2 cm on each side for the ends and another 1-2 cm on the turn.
Cut the image to the required size.
We degrease the door and remove all irregularities.
Carefully glue and smooth.
We make holes for the handles and install them.

Use a hairdryer as in the case of car film it is forbidden: the film is deformed.

The most the hard part- corners of the door. You can paste them over in two ways, it’s a matter of taste:

Butt-butt
overlap

Corners should be pasted over with the utmost care, because self-adhesive film will not stick to superglue.

During the renovation of the kitchen, it was decided to unload the shelf for drying plates from the lids that had accumulated there, hanging them on the doors with reverse side. To do this, you need to purchase regular hooks and secure them in any convenient way.

To prevent the screws from being visible under the film, the holes for their installation must first be countersinked, i.e. make holes for recessing them.

The final stage of updating the headset was the doors under hob, which were not originally there. The doors were made of 5 mm. plywood. If you really want, you can assemble the entire set of plywood with your own hands.

Defects in the pasting can be removed with a blade, but to do this you need to wait 1-2 weeks: then the film will finally take its place.

The refrigerator can be the heaviest item to cover. Get ready for the fact that the film will have to be removed and pasted repeatedly, fortunately, it allows this. Getting rid of small bubbles is very problematic, so it is better to expel excess air after completing the process using a needle.

Conclusions and prices

Several conclusions based on the results of the façade renovation:

The film can be washed and rubbed.
It holds up very well and is very difficult to remove.
Door corners are the weakest points.
The film is easily scratched.

The costs for such a kitchen renovation were as follows: about $120 for a self-adhesive print with lamination and about $90 for plywood, hooks and handles. When purchasing regular film, the budget can be reduced significantly.

Do you want something new and fresh in your kitchen interior, but don’t want to undertake a major renovation? A great option is to decorate an old kitchen so that the room sparkles with new colors. From this article you will learn how to transform your interior beyond recognition with little material and labor costs. You will only need a little imagination and available materials. Let's go!

IDEA #1

An option from the “cheap and cheerful” category is to use self-adhesive film. This one is relatively inexpensive material after some simple manipulations it will change the furniture beyond recognition. The stores offer a large selection of such films: they come in one color or with bright unusual prints, and can imitate any material: marble, tile, wood, etc. Do you see what a wide choice you have? In addition to its decorative properties, high-quality film is valued for another thing: it is moisture resistant, resistant to temperature and mechanical damage. Thanks to this, it can be glued not only to the facade of the kitchen, but also to the countertop.

Update old kitchen this way it won't take much time. List necessary tools not that big, not to say tiny. To create beauty you will need the material itself, scissors and a ruler. By the way, some companies apply a grid on the paper on the back of the film, so you can cut perfectly evenly. If you don’t need major changes and you just want to refresh the look of the room, then you can purchase vinyl stickers. They can be glued to any flat surface: kitchen facade, refrigerator, table, apron. Manufacturers offer various themes for stickers: they can be delicate flowers or funny images of animals.

IDEA #2

The most obvious DIY option for remodeling an old kitchen is to paint it. A new color can give furniture new life. Rest assured, your guests will think you've purchased a new set! An option for the brave is to combine several colors, then the changes will be dramatic.

IDEA #3

How to restore an old kitchen using other materials, ceramic tiles for example? It's a stereotype that it can only be on the wall. This material will look great on the kitchen facade! The tiles can be the same as on the apron - if you don’t know where to put the leftovers after repairs. Then the motives for different surfaces will overlap, and the kitchen will become very harmonious. Otherwise, you can play with contrasts and decorate the doors at odds with the overall style of the room.

How to pull off this trick? It's simple: remove the doors from their hinges, clean their surface, and paint if necessary. The tiles are attached to the facade using special glue. If the pattern does not seem self-sufficient to you, then you can frame the tiles in a frame made of decorative molding.

IDEA #4

If the methods described above do not suit you, you will still have to damage the integrity of the furniture. We propose to turn an old kitchen into a new one using new doors. Of all the proposals, this option is the most expensive, however, the result will be more noticeable. In any case, it will cost much less than buying a new headset. If your kitchen model is quite popular, then finding its front will not be difficult. If such furniture has gone out of fashion or was not very common at all, then you will have to look for or order doors. Fortunately, there are quite a lot of companies that offer similar services.

You can vary the cost of restoring an old kitchen. Cheap options: doors made of pine, plastic, chipboard. You will have to spend more money on MDF or solid wood. The installation of new doors can be done by specialists from the same company where you ordered them. However, anyone who is familiar with the word “repair” can handle this simple task. Modern furniture As a rule, it is assembled quickly and without unnecessary effort.

And a few more tricks on how to remodel an old kitchen.

Trick #1

Tip for the lazy: you don’t have to remodel an old kitchen to make it look new. You can simply distract the eye from old furniture with bright accessories. Colored curtains, clocks, dishes - and all eyes are focused on them. However, keep in mind that if the condition of the furniture really requires repair, then such a trick will not always be successful. Another nuance: kitchen cabinets should be neutral in color, otherwise the placement of accents will only make the interior too colorful.

Trick #2

Open shelves will lighten the kitchen interior. They also provide more possibilities for design, because in this case the tone will be set by the contents of the shelves. Beautiful dishes, original jars for storing cereals - and now a boring kitchen has turned into an island of brightness. To change the interior, just change a few items. Thanks to this, the room will not have time to bore you.

Trick #3

Buy black or brown paint and paint over one cabinet or part of a door. And now there was a place in the room for notes. Here you can mark a list of products you should buy or favorite recipes. The surface is also suitable for leaving a message to your family. By the way, you can buy special vinyl stickers on which you can write with chalk. Then you won't have to bother with paint.

Trick #4

Who would have thought that simple handles could change the interior so much? It would seem like this small detail! But their replacement will be noticeable. By the way, long tubular handles are very fashionable now. They will even turn Soviet furniture into a modern set.

Trick #5

If you want to follow this when remodeling your kitchen rustic style, then you can replace the cabinet doors with curtains. This will make the interior more airy. In addition, this will make it easier to get to the dishes.

Trick #6

Moldings are decorative volumetric elements that can turn an ordinary cabinet into an exquisite piece of furniture. It is attached with special glue.

For a domestic person, a kitchen is not only a place where food is prepared. This is a room for family lunches and dinners, a place to meet friends and family. All this means only one thing - the kitchen should not only be convenient for the housewife, but also attractive in appearance. Every decor matters, and even more so the kitchen set. When cracks and stains appear on it, or when it no longer matches the style of the kitchen and the tastes of the owners, many people think about buying a new set. But is it always advisable to spend money on something if you can improve the existing one? If the set is still strong and outdated in size and layout, then you can transform it with your own hands. Let's look at the most popular and effective ways, how to update your kitchen set.

Self-adhesive film

This method of restoring a kitchen set has become truly popular, and all thanks to its numerous benefits:

The downside is the low durability of the film, only 3-4 years, but the low cost and ease of replacement smooth out this drawback.

The procedure for gluing kitchen facades is quite simple. Main, follow these guidelines:

choose film suitable color, taking into account preferences for the new. It is not necessary to take material with imitation wood - you can take a plain film light color, and then it will be possible to make a small kitchen larger and make your dreams come true;
It is best to remove the kitchen facades - this will make the work easier. The fittings must be dismantled in any case;
measure the parameters of each removed facade;
the film must be glued to a clean, dry surface, i.e. facades must be carefully . This can be done using soap solution, or using detergent for dishes. After this, you need to remove the remaining detergents and wipe the facades dry;
If the facades have serious damage, you will have to spend some time on repairs. The peeling edges at the ends must be glued. The holes must be sanded, then filled, sanded again and primed. If there are large potholes, then it is better to glue a patch of plywood or veneer in their place;
In accordance with the measurements taken, the film must be cut. Experienced craftsmen recommend adding 4-5 cm of allowance in places where the film will bend. If on film large drawing, then when cutting you need to control that it is positioned correctly. Better to cut stationery knife– this way the edge will be as smooth and neat as possible;
Take the first piece of film, start removing the protective layer of paper and apply the film with the adhesive side to the facade. Controlling the evenness, gradually peel off the protective layer and stick the film;
You can roll the film with a rubber roller or a plastic scraper. This removes any remaining air. It is necessary to smooth out from the center to the edges. If there are any air bubbles left, you can pierce them with a needle and roll the surface again with a roller;
If suddenly you notice that somewhere the film is glued crookedly, then within 5-6 hours the situation can be corrected. The film can be re-glued, but not more than 1-2 times, since then the glue will simply lose its properties;
when all the facades are pasted over, you can screw them back on;
You can use old fittings, or you can replace them with new ones, which fit better into the updated style.

If the shelves are dirty to such an extent that no detergent can remove them, then they can also be covered with film. The operating principle is still the same. The film can be chosen to be close to the original color of the shelves.

Replacement of facades

Many people think that facades covered with film look somehow too modest. This is all, of course, a matter of taste and personal preference, but it is difficult to radically change the kitchen using vinyl film, because glass inserts or panels will not be added to the doors. To make serious changes to the kitchen interior, it is better to act radically and completely replace the facades. Yes, it will be more expensive than with film, but still much cheaper than buying a new headset. This method is great if the furniture frame is still quite strong and durable.

It will be easiest for the owners modular furniture, which was purchased relatively recently. Then you can buy facades of the required size and replace them yourself. But you’re not so lucky often, so you usually have to make custom-made facades. It is not at all necessary to change wooden doors to wooden ones, and chipboard to chipboard. The uniqueness of this restoration method lies precisely in the fact that the appearance of the set can be dramatically changed using completely different materials.

Most cheap option– facades made of chipboard or plastic. MDF and wood will cost more. You can choose fittings and decorations, for example, use glass inserts, but all this will be reflected in the price. Handy craftsmen, of course, can make all the facades themselves. If you have woodworking skills, then why not? But much more It’s easier and faster to contact a specialized company, which will produce facades for your set.

Repair of kitchen facades in Moscow

For residents of Moscow and the region, we recommend the company " Kitchen Renovation", which has been operating for more than 20 years and specializes in the repair of kitchen facades. Experienced specialists can replace facades or repair existing ones by painting, enamel coating or gluing film. The company's services also include hardware repair and countertop replacement. All work is carried out on site, preliminary measurements are taken, the design and estimate are agreed upon, and the required fittings are manufactured from the desired material. All work is guaranteed. You can view detailed information and examples of work on the page https://remont-kuhni.com/service/remont-kuhonnyh-fasadov/.

An example of the work of specialists from the Kitchen Repair company

Coloring

The method is quite simple, but requires careful surface preparation. The main advantage of the method is Possibility to paint the facade in any color. If you want to make your kitchen bolder, you can choose bright shade, such as blue, green or orange. A win-win color is white, as well as many light shades, incl. beige, gray, cream, etc. Imagine in advance what the kitchen will look like and get creative.

At the same time as painting the facades, they can be slightly transformed using moldings, special strips that are glued to the surface and give it an interesting relief.

The sequence of actions is as follows:

remove the facades from the furniture, dismantle the fittings and glass. Those elements that are difficult to remove can be sealed with masking tape;
old varnish or using a sander. If PVC film was used as decoration, then it is better to use. The temperature will melt the film and make it easier to remove. It is better to work in a respirator so that small particles of the facade and the pungent odor of PVC do not enter the respiratory tract;
if there is serious damage, they must be filled with putty and then sanded;
the surface is rubbed, then dust is removed and degreasing is carried out;
if you plan to use moldings, then they are attached at this stage. You can choose smooth or textured planks; there are products that imitate stucco. It is better to sand the planks in advance, then they are cut into pieces required sizes. Often moldings are attached along the contour of the doors, or they are formed into a pattern closer to the center. Usually a connection at an angle of 45 degrees is used. After you have made sure that the figure is laid out evenly, the elements are glued, you can use glue to wooden products. It is allowed to use nails without heads;
MDF, chipboard and wood absorb moisture well, so it is better to pre-coat them. The one designed for woodwork will do. It is better to apply two layers;
Now you can start painting. It is better to use auto enamel. The first is cheaper, the second is better in terms of moisture resistance and resistance to mechanical damage. Can be used. The paint is applied in 2-3 layers depending on the required color saturation. To guarantee, some craftsmen cover the facades with a layer of transparent varnish;
when the paint has dried, the masking tape is removed, the fittings are returned to their place, and the facades themselves are hung on hinges.

If coloring seems too banal to you, then use glisal, translucent glossy paint. It is applied in exactly the same way as acrylic paint, but while the coating dries, you can create an interesting texture on the surface. Using a sponge, bag or other available items, you can make a geometric design or an ornate pattern. If anything happens, part of the drawing can be removed with a roller. The result is an unusual result that will appeal to lovers of ethno-style.

Varnish coating

Option will do only for facades made of solid wood. Varnish allows you to reliably protect the wood and at the same time does not hide its chic natural look. When it comes to furniture, nitrocellulose, alkyd-urea, polyurethane, epoxy and polyester are used. It is important that the varnish protects the wood from moisture and elevated temperature. The varnishes have a not very pleasant smell, so it is better to carry out all work outside. If this is not possible, then it is better to take the material water based, it has almost no smell.

It is very important to decide in advance with gloss level. The varnish can be glossy, which will add visual volume to the set, or it can be matte, which will emphasize the wood pattern. The degree of gloss is indicated on the packaging as a percentage of reflected light: glossy varnish will reflect up to 90% of light, matte - only 10%, there is a lot intermediate options. Which is better depends only on your preferences.

The operating procedure is as follows:

remove the facades, dismantle the fittings, if necessary, seal some parts with masking tape;
remove the old layer of varnish; you can use sandpaper. Dust is best removed with a vacuum cleaner. After finishing the work, wipe the surface with a damp cloth, then allow it to dry thoroughly;
apply primer varnish;
The varnish is applied using a brush or roller; it is better that each new layer is slightly thinner than the previous one;
Some types of varnish need to be worked only outdoors;
drying speed varies for different varnishes, average indicated on the packaging;
After drying, the tape is removed and the fittings are returned to their place.

To create aging effect, you can apply stain in several layers.

Updating hardware

We have all repeatedly heard about the enormous influence of little things, but many, however, refuse to believe the truth of this statement. Designers, without any doubt, convince us that sometimes changing the handles on a kitchen set can transform the kitchen space. More often than not, replacement of fittings is carried out along with updating or replacing facades.

It happens that the kitchen set itself is perfectly preserved, but the handles from constant interaction with them have become peeling, tarnished, or even deformed in places. Remove the old fittings and head to a specialty store, where they offer a wide variety of handles to choose from. The main thing is that the size matches and you don’t have to drill new holes.

If the old handles fit perfectly into the style of the kitchen, then you can find new ones that are as similar to them as possible. If you want something fresh, or kitchen facade after some simple manipulations it becomes completely unrecognizable, then choose handles in a new style. The range of manufacturers includes handles in modern and classic style, smooth chrome plated and antique carved. There are handles with imitation leaves and animals, and some with inlaid glass and stones. There are wooden, plastic and metal, transparent and colored - everyone can choose the right one.

Maybe, the hinges and mechanisms of the sliding shelves need to be replaced. Before going to the store, these elements should be dismantled and taken with you as a sample. New loops are selected to match the size of the previous ones. It happens that the existing holes become very loose, and it is impossible to attach new hinges to them. Then they will have to be puttied with an acrylic-based compound in the color of the facade, sanded, varnished or painted, and only then new holes will be drilled and purchased hinges installed. Old roller mechanisms can be replaced with ball ones. All these actions give a huge result - using the headset becomes more pleasant and comfortable.

Glass replacement

As a rule, it is enough to simply wash glass inserts in facades well to return them to their original ideal appearance. But what if you want something new? You can replace the existing transparent glass with frosted or colored ones, then the kitchen will noticeably change. True, the glass will have to be made to order, and not everyone can handle the replacement itself.

More budget option- buy . With its help, you can give the glass the desired shade without depriving them of transparency. It will help create a matte effect or imitate the most. Anyone who knows how to use a tape measure or measuring tape, scissors and is able to carefully glue.

There is also an old antiquated method that involves applying a mixture of chalk powder and silicate glue to the glass. This material is applied to the glass in two layers, after which they become matte.

Decoupage of kitchen facades

Decoupage is a great way to update your kitchen set and give it a touch of style. After the transformation, the facades will look as if talented artists painted them for you, but you will know that you made all this beauty with your own hands. You can put absolutely any design on cabinets and shelves, but usually they choose something related to plant and kitchen themes: images of fruits and vegetables, coffee, jars of spices and cereals, flowers, etc. Decoupage will help decorate facades with ornaments in the style of Gzhel or Petrikov painting. The main thing is to find a suitable drawing - no one limits your imagination.

Everyone can cope with the restoration of facades on their own:

remove all doors, remove fittings;
If the surface of the headset is perfectly flat and smooth, then you only need to wash it well to get rid of stains of grease and dirt. If there are defects, it is better to sand the surface. First use fine-grained sandpaper and then coarse-grained sandpaper. If you have at your disposal grinder, then it will greatly simplify the process. If there are cracks, depressions, or pits, it is better to fill them with putty. When it dries, the treated areas are sanded again. After this, the facades can be primed, but many skip this stage;
The decoupage technique is suitable not only for wood, chipboard and MDF - it can also be used to decorate plastic and glass facades. Preparing them for decoration is very simple - just get rid of all the dirt and grease;
The easiest way is to use three-layer napkins for decoupage. Think in advance about which part of the façade the drawing will be located. Don't use images that are too small. Different cabinets can be decorated with pictures in the same style. The image can be glued to regular PVA glue;
Now all that remains is to open the facade with acrylic varnish, it is better to use 3-4 layers, each applied after the previous one has completely dried. The easiest way to work is with a narrow brush with long bristles;
All that remains is to return the fittings and install the facades.

If this is not your first work using the decoupage technique, then you can use not only special napkins. Experienced craftsmen know that fragments of wallpaper with a suitable pattern, and even maple for kitchen table, not to mention the fact that the image you like can be printed on a printer.

Decoration with ceramic tiles

After renovation, almost everyone has leftover tiles. You don’t need a lot of material for this method, so even the purchase won’t break your budget. Naturally, not all facades are tiled. A fragment with a beautiful pattern can be glued in the center. This can be one tile or four smaller tiles laid out in a square or diamond shape. You can lay out the contours of the cabinets with small tiles. Often such decoration is used to decorate the lower or upper edge of the set. The image on the tiles should match the overall style of the kitchen.

The operating principle is as follows:

Decoration with rattan inserts

The principle is the same as with ceramic tiles. Rattan inserts will look appropriate with ethno- and eco-style. Rattan copes well with moisture, which is why it is well suited for the kitchen. It can be used to replace glass inserts along with large-scale restoration of facades. Rattan inserts can be glued on top of blind cabinets. The variety of weaves and the presence of several shades will allow you to choose suitable option inserts.

Working with rattan is easy:

Use of chintz

Fabric decor is rarely used, so this is your chance to make your kitchen unique. You will need a piece of fabric with a suitable pattern, and then everything is simple:

What else is used to update kitchen facades?

The imagination of home craftsmen knows no bounds, and people's ingenuity has generated a lot of interesting, non-trivial ideas on how else to refine an old kitchen façade. The following materials are used for this:

How to update your kitchen countertop?

Renewing the facades and leaving the countertops unattended means not finishing what you started. – the most vulnerable place of a kitchen set, because its surface constantly encounters drops of water and fat, mechanical loads, high temperature. Chipboard countertops, as a rule, are the first to suffer, and when the façade looks even more or less normal, work surface leaves much to be desired.

What can you do yourself to update? kitchen countertop? There are several options:

If the countertop is still in good condition, but there are only one or two noticeable flaws (for example, burn marks or places from a knife blow), you can carry out local repairs. The defective area is carefully processed with a milling cutter to end up with a quarry-type depression. It is filled with wood putty to match the color of the tabletop, the material is added in portions, compacted well, and the excess is removed with a knife. The treated area is sanded, polished and painted. If you can accurately replicate the color or pattern of the countertop, then the repair area will be invisible. When everything is really bad with the countertop, it’s better to have it done complete replacement by turning to professionals.

By combining the methods described above, you can transform your kitchen set with your own hands in such a way that all guests will think that you bought new furniture. If we combine this transformation with cosmetic repairs in the kitchen, the result will be absolutely impressive.