Homemade products for the garage, new versions. DIY garage accessories: all the most useful things. Video: we will equip the workshop ourselves

A garage is more than just a place to park a car. It is also a workshop, a place of relaxation, and a club of interests. Therefore, the arrangement of the garage should be convenient and thoughtful. You need to place a lot of things in a small area, and they should be convenient to use. Homemade products for the garage will help with this. What people don’t do with their own hands. From a simple shelf to a complex device. You can make all this yourself. But you need to know how. Several ideas for modernizing a garage and a plan for their implementation are in the article.

Homemade garage: ideas for arrangement

Setting up a garage is a long process. You won’t be able to do everything right away. You have to constantly modernize, change, and create something new. In this case, they mainly use homemade products for the garage. It requires less money and is also a pleasure - making the right thing out of garbage is worth a lot.

Tire and wheel storage

Every car owner is faced with the problem of storing out-of-season “shoes” for the car. Where to put the tires is a sore point. In general, the way tires are stored depends on whether they are mounted on rims or not.

So tires with rims can be hung or stored lying down - in the form of a stack, stacking them one on top of the other. To hang tires, you can use luggage straps, chains, or a metal cable with a diameter of 4 mm or more in a polyethylene sheath. Fasten the belts to the ceiling, wall, or beam located above.

Another available method is to drive pins or hooks with a small bending radius into the wall. The distance between the hooks is slightly larger than the diameter of the tires. The length of the pins should be such that they do not protrude beyond the tire. You can fill them almost to the ceiling so that the wheels fit.

Tires without rims can only be stored standing up. Special shelves are made for them. They are usually welded from profiled pipes. 20*20 mm, maximum 30*30 mm. You can also use a corner. Round pipe It’s inconvenient to cook, but cross members can be made from it - the tires fit and hold up better in this case.

The width of the shelf is 4 times the width of the tire, plus a margin of 10-15 cm for some freedom. Height back wall- slightly above the outer diameter of the wheel. The design is simple = from the side it resembles a right triangle. Having it, welding such a shelf will not be difficult.

A shelf for storing tires is an excellent homemade product for the garage. This is a factory option with a completely inhumane price tag. But you can borrow an idea - the crossbars can be rearranged depending on the size of the tires...you never know A shelf for tires in the garage with limited space. No tires - you can fold the shelf

Such shelves are usually hung on the wall. But the place must be chosen so that light does not fall on the rubber - this will deteriorate it. Not the most complicated DIY projects for the garage, but very useful.

Workplace

Probably the most a large number of DIY projects for the garage are related to the equipment of the workplace and tool storage systems. Moreover, this is not the only way to solve this problem. First of all, you need to decide where it will be located workplace. There are three options:

The entire width of the far wall. If the garage is of sufficient length and it is possible to “steal” about 1.5 meters. The advantage is that everything is located compactly, at hand, and does not interfere with walking along the car. The disadvantage of this solution is that you have to carry tools far away if work is carried out outdoors.
Tabletop and many drawers. The main thing is to remember where everything is
Along one of long walls. This arrangement is chosen if the garage is wide but not long enough. It makes sense to place the table and workbench to the left of the entrance - on the driver’s side. But this is not critical. The disadvantage of this arrangement of the workplace in the garage is that you have to move with some caution, but it is more convenient to bring/take out tools outside.
The main thing is to place the tools correctly
Taking one of the corners. This intermediate option. Moreover, one of the sides can be made longer, the other shorter.
Placing a desktop in the corner of the garage and placing a sofa next to it is not a solution to the problem. Occupying two adjacent sides is a great idea.

A table or workbench for a garage is made of boards and covered with plywood. Inexpensive, quite reliable. If there welding machine and checking skills, you can weld a frame from a corner or profiled pipe. Again, it is better to sheathe it with moisture-resistant plywood. The result is a smooth, abrasion-resistant surface. You can, of course, use it, but the laminating layer is quickly damaged.

To prevent the space from wandering around, you can install shelves or make drawers under the countertop. Boxes are more convenient, but making them is still a hassle. It is quite possible to make shelves and put boxes made of plywood on them. Also suitable plastic boxes and baskets. But the walls must be thick.

There is, by the way useful idea— make a rack for storing tools from used canisters. Find ones that have the handle on top. Then everything is simple - one of the sides is cut out and in the future this canister is used as a box.

It’s not necessary to make a whole rack - it’s still difficult to remember where and what is located. But you can use the same principle to make drawers for shelves. By the way, you can stick inscriptions or pictures on the ends (with pictures identification is faster). Such homemade projects for the garage bring satisfaction - create useful thing out of the trash - a pleasant feeling.

Tool storage

The most difficult task— organize tool storage in the garage. We must make sure that everything is in order, but at the same time, is at hand and in sight. Moreover, closed boxes are suitable only for very organized people who always put the taken item back in its place. Otherwise, you will constantly rummage through drawers, forgetting where everything is. There are several ideas for convenient storage small items and tools. This is completely simple homemade products for the garage.

A simple solution will help you quickly solve the problem. metal grid. A reinforcing mesh made of 2 mm wire, a 10 cm cage, is suitable. Attach it to the wall, bite off some rods, bend them, make hooks, crossbars, etc. out of them. You can buy special hooks that are attached to the mesh (available in stores that sell commercial equipment); ordinary double-sided hooks, which can be bought or made from wire, are also suitable.

A grid on the wall is a way to quickly organize tool storage

It is convenient to store screwdrivers on a special shelf. Take a board, plywood, 10-15 mm thick. The board must be sanded well so that there are no splinters. Then drill holes in the plane different diameters in one or two rows. If the board is wide enough, you can make larger holes for chisels or even hammer handles. Clean all the chips again. Now we need to come up with a wall mount. You can use a regular bracket. Screwdrivers, chisels, and other similar materials are inserted into the holes. Convenient, fast, everything is in sight.

There is also useful homemade products for the garage, which allow you to organize the storage of hand tools. Pliers, pliers, wire cutters, etc. placing it comfortably is problematic. You can hang it on a net. It’s convenient to take off, but not to hang it up. But there is a simple solution - attach a narrow board and put the tool on it. To make it sit comfortably, grind down the board on one side. When cut, it should look like an isosceles triangle.

More simple idea for storing cordless tools, chargers and spare batteries for them. Make a shelf as in the photo above. In the lower part, cuts of different formats are made, and the upper parts are used as regular shelves. The idea is that everything is in one place, quickly taken out/installed in place. These garage DIY projects will make your workspace comfortable. It will be easy to maintain order.

Homemade carriers for the garage

Even with very good lighting in the garage itself or on the street during the day, under the bottom of the car, visibility is very low. To illuminate the front of the work, portable lamps are used - carriers. These are the simplest DIY projects for the garage. With them you can begin the epic of arranging and equipping your garage space.

In the very simple version This is a socket attached to a wire and can have a small shield with a hook attached to it. This is such a simple thing. The light bulbs used are ordinary ones - incandescent or housekeeper with a standard socket. Everything is not bad, except that these light bulbs break very often, you need to figure out how to hang them so that they shine in a specific place. In general, the design needs improvement. There are several modification options.

Unbreakable lamp socket

This plastic bottle lampshade perfectly protects the fragile bulb of an energy-saving lamp. You can also use an LED lamp, but an incandescent lamp will not work - it gets too hot. The design is simple - a cord with a plug and a cartridge at the end.

The main task is to find a plastic vessel with walls made of translucent milky plastic of medium thickness. Transparent will not work - it will not scatter light, too thin walls will not save the lamp from impacts. After you have found a suitable vessel, some small change remains:

Everything is simple, but such a lamp allows you to brightly illuminate exactly the desired area, the rest of the space is filled with even light that does not hurt the eyes.

Carrying LED Recessed Light

The simplest and most common homemade products for the garage are portable lamps. Without them, it is inconvenient to work not only in, but even just on a workbench. Need a flat built-in LED lamp, which can be switched on at 220 V. These models are called “tablets” because of their shape. You also need a cord with a plug and a piece of plastic window sill to install the lamp. The window sill piece should be larger in size than the lamp. You choose the specific sizes yourself. The next steps are:

That's it, the homemade carrier is ready. This option is for floor installation. The movable leg allows you to change the angle of inclination. To make it turn over less, you can attach a couple of weights inside the body (in its lower part).

Attach the carrying cord to the ceiling

Convenience comes from little things, and very simple homemade products for the garage help with this. For example, you can remove the cable from a portable lamp that always gets tangled under your feet. Carrying is usually done with a cheap cable. It is not the most flexible, does not fold well, and its coils on the floor get under your feet. In general, it is inconvenient to use. You can protect yourself and carry it by hanging the cable from the ceiling. The solution is simple but very effective.

You can make this “suspension” to the ceiling for carrying with your own hands in an hour

Two anchors with a ring at the end.
Cable tie.
Clamp clamp.
Metal cable. The length depends on the size of the garage - it needs to be from one wall to the other.
Steel/plastic rings or steel wire and a piece of pipe to make these rings.
Carrying with a long cable - its length is approximately double the length of the garage.

The cable is stretched along the long side of the garage. It’s more convenient - not far from the “working” wall, where the workbench or other equipment is located. A little work:

Well, that's all. You can use it. With such a device, the carrier can be carried to any end of the garage without the cable getting tangled or caught. Convenient, takes little time.

DIY garage compressor

A compressor is needed in any garage. And, by the way, this is not the most difficult homemade product for the garage. Low-power garage compressor for inflating tires and other small work You can make it yourself from scrap materials. For example, from a compressor from a refrigerator. For this you will need:

refrigerator compressor;
a sealed cylinder with thick walls (you can use a fire extinguisher flask or a small gas cylinder);
safety valve at 8 atm;
pressure gauge;
fitting;
oxygen hoses with couplings (select the length based on the size of your spare parts);
base for the compressor - a thick board or piece of plywood will do.

In order not to pump any nasty stuff into the tires, it is advisable to also install a filter to separate oils, dust and other contaminants. Scheme homemade compressor shown in the photo.

The compressor must have a starting device. We plug it into the network, see which tube the air is sucked into, and mark it. You can put a car filter on it - clean air will be pumped in.

We assemble an oil separator receiver from a cylinder and a safety valve. To do this, we cut two fittings into the cylinder - for air inlet and outlet. We place a safety valve on the inlet hole and connect the compressor outlet to it using an oxygen hose.

We install another automobile oil filter at the outlet of the oil separator receiver to completely remove the oil. We connect the filter to the pressure gauge, and from it comes a hose, which is connected to the tire through the appropriate adapter.

Assembly is complete. But in order to carry this device comfortably, everything needs to be secured in some way. You can weld the frame to size, attach wheels and a handle for easy transportation. One of the compressor options for inflating wheels is described in the video. There is no receiver, but its functions are performed by an oil filter. You can do it this way, but with a receiver the design is more reliable.

Since the compressor in the refrigerator is low-power, it may take a long time to inflate the tires. You can make it more powerful by installing two compressors that will start simultaneously. Accordingly, the pressure will build up twice as fast. But such an installation requires a more robust security group. Such homemade products require a little more equipment, since the circuit is still more complicated.

A garage press is assembled from scrap materials. No complex parts are needed; it is made practically from scrap metal scraps. We will need:

Two sections of channel, 80 cm long each, with shelf dimensions of 50x30 cm.
Piece profile pipe diameter 40 or 60 mm, length 2.5 meters.
Iron plate 8 mm thick, dimensions 250x250 cm.
Two corners, one of which is 300 mm long, with a section of 50x50 mm, the second is 250 mm long, with a section of 25x25 mm.
The hydraulic jack is the main mechanism of the press.
Two springs and bolts of different diameters for fastening. They are selected locally.

The base on which the press is located can be any plane, the main thing is that it is strong and solid. Usually the press is installed on a workbench.

Homemade press on a workbench

First we make the side racks on which the entire mechanism rests. To do this, we take two sections of channel. From the bottom, for emphasis on each, corners are attached with the letter T. You can immediately make fastening points in them for subsequent installation on the base by drilling holes in four places on each edge. Then, using the same principle, a corner is attached to the upper part of the channel, and the pressing part of the press - a metal plate - is attached to it.

Now on the bottom of the support channels you need to make fastenings for the springs that return the press mechanism back. To do this, two holes are drilled and a bolt is screwed in from the inside. Then, using the same principle, the two upper fasteners are prepared on the underside of the pressure sheet.

Now all that remains is to make a stand for the improvised press. To do this, two profile pipes are cut, the length of which is slightly longer than the side supports from the channel. Connect them in such a way that they tightly grip the vertical posts of the press, but do not clamp them. A jack is installed under them, and holes are drilled in place for its fastening.

Improvised press on a stand

The homemade press is ready. For smooth movement, the side channel is lubricated with grease or oil. When the need arises to use it, the mechanism is installed on prepared mounts and the frame is tightened with bolts.

It’s easy to build an alarm system in the garage with your own hands; you don’t need any fancy “devices” for this. All that is needed is an old push-button telephone, a sealed contact, a spring switch, or better yet, a breaker and wires.

Do-it-yourself telephone alarm for the garage

The alarm is assembled as follows:

On your phone, you need to set up a one-click call and enter your number.
Then carefully disassemble it to connect the alarm wires.
If the “hang up” and “call” functions on the device are controlled by one key, then the first wire is soldered to it, and the second to the speed dial digit.
If these functions operate separately, then the third wire from the alarm breaker goes to the key.
If the button is used with two contacts, then they are soldered onto the call and dial function button.

Assembling a homemade garage alarm from a telephone

When making such homemade products, keep in mind that the breaker button will play a major role. It must be installed on the edge garage doors between their opening and closing parts. At the same time, it should be positioned so that rain and snow do not fall on it. And the phone needs to be hidden in an inaccessible place, for example, in the far corner of the rack you built. To do this, you need to solder long wires to the contacts in advance. When closing the garage, the breaker button is pressed by the garage door leaf, and at this time the alarm is in standby mode. When the gate is broken or opened, the contact opens and the circuit signal is sent to the telephone, which will dial the entered number.

Remember that DIY projects like garage alarms require a certain amount of secrecy. You don’t need to tell everyone what a craftsman you are.

It is simply impossible without such structures as racks with shelves. You can put all the little things, spare parts, tools on them and attach a homemade press in disassembled form. To ensure that such homemade products fit into the garage space, first determine the location for their installation. They are usually constructed on one side of a wall or at the end of a room. The width must be calculated so that there is free access to the car and the open doors do not touch the pillars.

To install shelving you will need:

block with a cross section of 50x50 mm,
sheets of chipboard or OSB for the construction of shelves,
iron corners and nails.

The base of the rack must be strong, because the considerable weight of the laid out tools presses on the shelves. Carry out all the calculations in advance and only then start working.

The basis of a homemade tool rack

The first to attach the block to the ceiling. To do this you will need self-tapping screws plastic stoppers. Using a hammer drill, holes are drilled along a pre-marked line in increments of 20–30 cm. Plugs are installed in them and the block is attached to them with self-tapping screws. Then the plumb line determines the installation location of the lower bar. Both the top and bottom bars should be on the same horizontal line to keep the shelving level and strong.

Now you need to install the vertical posts. For better stability of a rack with shelves, they need to be fastened every 40–50 cm. They are fixed with nails, which are driven in using the “oblique hammering” method or using iron corners. We measure the distance from the top bar to the bottom and according to the size we prepare the vertical elements of the shelving frame.

Now you need to install horizontal jumpers to support the shelves, but first you need to mark the places for their attachment. For this you will need a tape measure. From the floor, mark the distance to install the first row of shelves on the rack on each vertically installed block. Then measure the distance between each stand. We cut the bars to these sizes. Now they need to be secured. We insert one between the posts and secure it with screws from the end, two on each side. This way we install all the frame elements. Then, from the installed bars, the second row of shelves on the rack is marked with a tape measure. They are installed in the same way.

Installation of frame elements of a homemade rack

Before installation, it would be better to calculate in advance the number of shelves on the racks and assemble the frame according to the drawn-up drawing or diagram.

Having collected outer frame, all that remains is to fix the bars on the wall to install the shelves. On the wall, at the level of each row cross beams on the frame, a line is marked. Then the horizontal position is checked with a building level and the timber is attached along the entire length of the structure according to the markings.

All that remains is to make the shelves for the rack and install them. We measure the distance from the wall to the edge of the frame and from one vertical post to another. We cut the chipboard sheet according to the obtained dimensions, install it in place and, for reliability, fix it on top with self-tapping screws. We do all the shelves in the same way.

Shelves usually don’t have doors; you can hang a dark fabric curtain along the entire length. That's all, the place to store the necessary things is ready. All that remains is to model a homemade workbench and it will be completed in the garage.

It is impossible to make homemade items in the garage without having a workbench at your disposal. First, its support is assembled from corners or a profile pipe. It is better to connect these parts by welding. But if this is not possible, then bolted fastening is allowed. But for this you will have to additionally mark the joints and drill holes. The convenient height of the finished workbench is 90 cm from the floor. This will make it more convenient to carry out work at the workbench. But for some it is better to repair while sitting, in which case the height of the workbench will be different. The dimensions and dimensions for each garage are different. And it’s better to decide on them before assembly.

Having assembled the base, we move on to making the tabletop for the workbench. Recommended thickness is 7–7.5 cm. Can be made from a single sheet of multilayer plywood 100 mm thick. If this is not possible, we will do it differently. Let's glue the tabletop together from several sheets of regular plywood. Standard thickness– 1 cm and in this case 7 pieces will be enough. Having decided in advance on the size of the workbench (its upper part, where the table top will be attached), we saw off the plywood along it. You can use PVA glue for connection, but Moment or BF is better. It must be applied to each sheet separately and after waiting for 3-5 minutes, connect all the sheets.

Making a workbench top from plywood

After this, the glued sheets must be laid on a flat place and pressed down on top with a heavy load; everything should remain in this state for 24 hours. In order not to cut each sheet of plywood to size, you can first glue them together, and then cut out the table top for the workbench from the prepared material.

Now you need to cut off an iron sheet for the top covering of the working surface of the workbench, on which all work will be carried out (metal 4–6 mm thick is required). For accuracy, it is better to place it on plywood and trace the outline with an awl or nail. Then cut the sheet with a jigsaw equipped with a metal file. You need to fasten the tabletop with bolts, having previously drilled holes in it and on the workbench. After assembling the workbench, you can make small shelves and cabinets with doors in its lower part. Any plywood or pieces of chipboard left over after making the racks will be suitable for this.

Iron sheet for workbench top cover

A variety of homemade products make the life and work process of a car enthusiast much easier. There is no need to look in the corners to see where everything is, all the details are in their place. A simple-to-assemble alarm system will reliably protect the garage from burglary or car theft.

Homemade garage: ideas for arrangement

Even in a small area you can fit everything

Tire and wheel storage

Tire storage methods

Cable in a polyethylene sheath, anchors with a ring and clamps for tightening

It is better to attach luggage straps to rings in the ceiling or hooks on the walls

Drive pins of sufficient length into the wall, but such that the pin does not stick out beyond the tire

Not only a pin will do, but also a hook with a small bend radius

Tires without rims can only be stored standing up. Special shelves are made for them. They are usually welded from profiled pipes. 20*20 mm, maximum 30*30 mm. You can also use a corner. It is inconvenient to weld a round pipe, but cross members can be made from it - the tires fit and hold better in this case.

The width of the shelf is 4 times the width of the tire, plus a margin of 10-15 cm for some freedom. The height of the rear wall is slightly higher than the outer diameter of the wheel. The design is simple = from the side it resembles a right triangle. Having an inverter welding machine, welding such a shelf will not be difficult.

Tire storage shelf - a great homemade product for the garage

This is a factory option with a completely inhumane price tag. But you can borrow an idea - the crossbars can be rearranged depending on the size of the tires... you never know

Just welded and painted

Workplace

Probably the largest number of DIY projects for the garage is related to the equipment of the workplace and tool storage systems. Moreover, shelves and racks in the garage are not the only way to solve this problem. First of all, you need to decide where the workplace will be located. There are three options:

A table or workbench for a garage is made of boards and covered with plywood. Inexpensive, quite reliable. If you have a welding machine and verification skills, you can weld a frame from a corner or profiled pipe. Again, it is better to sheathe it with moisture-resistant plywood. The result is a smooth, abrasion-resistant surface. You can, of course, use laminated chipboard, but the laminating layer is quickly damaged.

U-shaped workbench for garage

To prevent the space from wandering around, you can install shelves or make drawers under the countertop. Boxes are more convenient, but making them is still a hassle. It is quite possible to make shelves and put boxes made of plywood on them. Plastic boxes and baskets are also suitable. But the walls must be thick.

You can put boxes on the shelves

By the way, there is a useful idea - to make a rack for storing tools from used canisters. Find ones that have the handle on top. Then everything is simple - one of the sides is cut out and in the future this canister is used as a box.

Useful and simple DIY projects for the garage

It’s not necessary to make a whole rack - it’s still difficult to remember where and what is located. But you can use the same principle to make drawers for shelves. By the way, you can stick inscriptions or pictures on the ends (with pictures identification is faster). Such DIY projects for the garage bring satisfaction - creating a useful thing from garbage is a pleasant feeling.

Tool storage

The most difficult task is organizing tool storage in the garage. We must make sure that everything is in order, but at the same time, is at hand and in sight. Moreover, closed boxes are suitable only for very organized people who always put the taken item back in its place. Otherwise, you will constantly rummage through drawers, forgetting where everything is. There are several ideas for convenient storage of small items and tools. These are very simple DIY projects for the garage.

An ordinary metal mesh will help to quickly solve the problem. A reinforcing mesh made of 2 mm wire, a 10 cm cage, is suitable. Attach it to the wall, bite off some rods, bend them, make hooks, crossbars, etc. out of them. You can buy special hooks that are attached to the mesh (available in stores that sell commercial equipment); ordinary double-sided hooks, which can be bought or made from wire, are also suitable.

A grid on the wall is a way to quickly organize tool storage

It is convenient to store screwdrivers on a special shelf. Take a board, plywood, 10-15 mm thick. The board must be sanded well so that there are no splinters. Then drill holes of different diameters in one or two rows in the plane. If the board is wide enough, you can make larger holes for chisels or even hammer handles. Clean all the chips again. Now we need to come up with a wall mount. You can use a regular bracket. Screwdrivers, chisels, and other similar materials are inserted into the holes. Convenient, fast, everything is in sight.

Idea for storing screwdrivers in the garage

There are also useful homemade products for the garage that allow you to organize the storage of hand tools. Pliers, pliers, wire cutters, etc. placing it comfortably is problematic. You can hang it on a net. It’s convenient to take off, but not to hang it up. But there is a simple solution - attach a narrow board and put the tool on it. To make it sit comfortably, grind down the board on one side. When cut, it should look like an isosceles triangle.

Storing hand tools in the garage

Another simple idea for storing cordless tools, chargers and spare batteries for them. Make a shelf as in the photo above. In the lower part, cuts of different formats are made, and the upper parts are used as regular shelves. The idea is that everything is in one place, quickly taken out/installed in place. These garage DIY projects will make your workspace comfortable. It will be easy to maintain order.

Homemade carriers for the garage

Even with very good lighting in the garage itself or on the street during the day, visibility under the bottom of the car is very low. To illuminate the front of the work, portable lamps are used - carriers. These are the simplest DIY projects for the garage. With them you can begin the epic of arranging and equipping your garage space.

The most common type of garage carrier. Homemade ones are usually made very similar

In its simplest form, it is a cartridge attached to a wire; a small screen with a hook can be attached to it. This is such a simple thing. The light bulbs used are ordinary ones - incandescent or housekeeper with a standard socket. Everything is not bad, except that these light bulbs break very often, you need to figure out how to hang them so that they shine in a specific place. In general, the design needs improvement. There are several modification options.

Unbreakable lamp socket

Everything is simple, but such a lamp allows you to brightly illuminate exactly the desired area, the rest of the space is filled with even light that does not hurt the eyes.

Carrying LED Recessed Light

The simplest and most common homemade products for the garage are portable lamps. Without them, it is inconvenient to work not only in a garage pit, but even just on a workbench. You need a flat recessed LED lamp that can be turned on at 220 V. These models are called “tablets” because of their shape. You also need a cord with a plug and a piece of plastic window sill to install the lamp. The window sill piece should be larger in size than the lamp. You choose the specific sizes yourself. The next steps are:

Attach the carrying cord to the ceiling

You can make this “suspension” to the ceiling for carrying with your own hands in an hour

Two anchors with a ring at the end.
Cable tie.
Clamp clamp.
Metal cable. The length depends on the size of the garage - it needs to be from one wall to the other.
Steel/plastic rings or steel wire and a piece of pipe to make these rings.
Carrying with a long cable - its length is approximately double the length of the garage.

The cable is stretched along the long side of the garage. It’s more convenient - not far from the “working” wall, where the workbench or other equipment is located. A little work:

Well, that's all. You can use it. With such a device, the carrier can be carried to any end of the garage without the cable getting tangled or caught. Convenient, takes little time.

DIY garage compressor

A compressor is needed in any garage. And, by the way, this is not the most difficult homemade product for the garage. A low-power compressor for the garage for inflating tires and other small jobs can be made with your own hands from auxiliary materials. For example, from a compressor from a refrigerator. For this you will need:

refrigerator compressor;
a sealed cylinder with thick walls (you can use a fire extinguisher flask or a small gas cylinder);
safety valve 8 atm;
pressure gauge;
fitting;
oxygen hoses with couplings (select the length based on the size of your spare parts);
base for the compressor - a thick board or piece of plywood will do.

In order not to pump any nasty stuff into the tires, it is advisable to also install a filter to separate oils, dust and other contaminants. The diagram of a homemade compressor is shown in the photo.

Homemade compressor diagram

The compressor must have a starting device. We plug it into the network, see which tube the air is sucked into, and mark it. You can put a car filter on it - clean air will be pumped in.

Homemade compressor for the garage based on a compressor from a refrigerator

By on home garden Many car owners use their garage as a workshop, gradually filling it with practical devices that make car repair and maintenance easier. Many of them can be made independently using the recommendations presented in this article.

Many garage workshop tools can be...

Homemade garage tools: for storing tools in the garage. Homemade gadgets for the home workshop

By on house garden

Many car owners use their garage as a workshop, gradually filling it with practical devices that make car repair and maintenance easier. Many of them can be made independently using the recommendations presented in this article.

Video of homemade machines and devices for the home workshop

Many accessories for a garage workshop can be made independently; the video below demonstrates some of them.

Garage DIYs- devices that make garage life much easier; in addition, they work no worse than factory machines. By equipping your workshop with such devices, you can independently produce the necessary parts for your car, as well as various crafts for your home or garden.

Video of homemade tools and accessories for the garage

It is difficult to predict in advance what devices may be needed when repairing a car, however, there are some homemade products, some of which are used most often. Some of them can be seen in the video below.

Drawings of homemade devices

Pipe bender for profile pipe

Pipe bender - useful in household a device that allows you to bend a metal or polymer pipe to a certain degree. Bent pipes often used in the construction of greenhouses and greenhouses, installation of heating and other needs. Using the presented drawing, you can make a manual pipe bender yourself.

Small homemade vise

A vice is a practical device used when performing plumbing work. With its help, it is possible to reliably fix a part requiring metalworking in a certain position.

This device consists of several parts:

base plate;
2nd lips – movable and non-movable;
lever;
chassis screw.

Using a small-sized bench vice, the drawing of which is presented above, it is convenient to sharpen and otherwise process small parts.

Wood CNC Router

Having a CNC milling machine in your home workshop allows you to perform a whole range of wood machining work.

Homemade milling machine consists of several units and parts:

bed;
calipers designed to move cutters;
caliper guides;
spindle with installed cutter;
microcontroller or switching board with microcircuits that provide automation of the machine;
electric motor with power supply;
drivers responsible for transmitting commands from the controller to the electric motor;
a vacuum cleaner for collecting sawdust generated as a result of the operation of the machine.

A DIY CNC milling machine allows you to perform engraving and milling work.

Homemade tools for car repairs

A windshield wiper arm remover is a special tool that facilitates the process of removing wiper arms. You can make it yourself from a piece of reinforcement, a six-channel channel and a ten-bolt. To do this, use a drilling machine to make 14 holes and weld 2 nuts on both sides of the hole and a handle from the reinforcement, screw the bolt into the workpiece and, putting on heat shrink, screw threaded rivet. The tool is ready.

Another version of the device for shooting windshield wiper arms is shown in the photo below.

Another useful homemade device with which you can manually re-align your wheels yourself. Another version of this device can be seen in the photo below.

When carrying out major car repairs, you usually cannot do without a lift. A factory-made device is not cheap, and is not needed very often, so it can easily be replaced with a device made at home.

Homemade machines and devices for the garage

By making devices for tire fitting and balancing, you can carry out this work yourself, significantly saving money on car maintenance. Besides similar devices They will come to the rescue if it is not possible to come to a specialized tire shop.

In your garage workshop you can equip universal machine for tire fitting using scrap materials - metal pipes and the hub.

When performing various crafts for the home, it often becomes necessary to drill a straight hole. This is difficult to accomplish a regular drill, but if you make a stand for a drill, like the one shown in the photo, then drilling without distortions will be much easier. This design can be made from various materials. For example:

made of metal;

made of wood.

Using the diagram presented below, you can make your own drilling machine from a drill.

Usage homemade press will allow the garage workshop to produce products using the pressing method. Make similar device can be done from a hydraulic jack fixed at the top of the frame, which in turn is welded from scrap materials. The pressure in this case is directed downward.

Another version of a homemade press, the design of which involves attaching a jack at the base of the bed. In this case, the pressure process is carried out upward.

Using a homemade press, you can straighten, bend sheets of metal, compress cardboard, and fasten individual elements. The video below demonstrates how to do this the right device on one's own.

Tool storage devices in the garage

Having order is the key to comfortable use of workspaces in the garage. To ensure this order in the workplace, special organizers are designed to make it convenient to store and easy to find. necessary tools. You can make such devices yourself, using available tools.

Simple and in an accessible way keep hand tool, is a wall organizer made from tin cans, attached to plywood sheet. Additionally, you can nail several hooks or nails to it to conveniently hang measuring and electrical tools. In the absence of tin cans, PVC pipes of various diameters can be used as holders, cut into pieces and screwed to a sheet of plywood or chipboard.

It’s even easier to make a special device for storing screwdrivers. To do this you need to take wooden block and drill holes in it the right size. Mount the finished holder on the wall. On the same holder you can organize a storage system for chisels and chisels. It is enough to cut out special holes in a wooden blank. In the same way, you can make a holder for power tools by cutting out the corresponding holes in a wooden shelf.

Interesting way Tool storage is suggested in the photo above. Its principle is based on the use of magnetic tapes attached to metal strips. Using such a system, it is convenient to store drills, keys and other metal tools.

Convenient and practical organizers for storing screws, bolts, nails and other small items can be made with your own hands from transparent plastic cans with lids. To prevent them from taking up space, you should attach them by the cover from below to the shelf. This and other ways to store tools allow you to efficiently use space in the garage and have everything you need at hand.

The video below demonstrates how to set up a simple and convenient tool storage system in your workshop or garage.

Homemade woodworking tools for the home workshop

Homemade milling machine

Homemade milling machines can perform one or more operations. Preference, of course, is given to multifunctional devices that save space in the garage workshop. With their help you can:

Make indentations of a certain shape;

Drill holes

Make grooves;

Process workpieces.

The simplest milling machine can be made on the basis of a drill. To do this, it is fixed to steel profile or in a plywood case, and a rotating clamp is placed opposite it. Parts are processed using special cutters held by hand.

Homemade lathe

DIY creation lathe allows you to make dishes, interior decor and furniture from wooden blanks. Such a device will become an affordable alternative to industrial production and will help realize your creative potential. A homemade lathe can be made from individual components and parts:

an electric motor used as an electric drive for the machine;
a headstock, which can serve as an electric sharpener;
tailstock made from a drill;
stop for cutters;
transverse guides;
a frame made of metal profiles or beams.

Front and tailstock lathe are the main working elements, between which a wooden blank is placed. The rotating movement from the electric motor is transmitted to the workpiece through the front headstock, while the rear one remains static, responsible for holding the workpiece. If you equip a homemade lathe with additional devices - a baluster, a trident, a copier and others, then its functionality will increase significantly.

The video below demonstrates how to make a lathe with your own hands.

Homemade drilling machine

Drill if necessary precise holes in metal, plastic or wooden parts, experienced craftsmen recommend using a drilling machine. Unlike a drill, which vibrates strongly during operation, this device provides high-quality results, regardless of the material and thickness of the workpiece. You can make a simple drilling machine yourself by using the same home drill, but installing it in a vertical position on a frame made of furniture board and attaching it to metal stand. If necessary, such a machine can be equipped with an asynchronous motor.

As a rule, home craftsmen do not stop at making the machines themselves. Very often they work to improve existing equipment.

The video below demonstrates useful devices for a lathe, expanding its functionality.

Homemade metal tools for the home workshop

These do-it-yourself devices for the home workshop are designed to facilitate the metalworking process. They are usually made from scrap materials and tools.

Among the most popular devices are:

pipe benders;
press;
vice;
milling, metalworking, turning, drilling and thicknessing machines;
devices for drill sharpening, knives and other tools.

With their help, a home craftsman can make practical devices for a summer house, garage, and also equip a comfortable home. Examples of useful machines and devices in the household can be seen in the photo below.

Homemade circular saw

Homemade thickness planer

Homemade cutting machine for metal

The video demonstrates how to make some useful household devices.

Taking into account the presented recommendations and drawings, any home craftsman will be able to make useful devices for the garage and machines for his workshop, arrange an ergonomic space in it, and realize his creative abilities.

DIY garage accessories: all the most useful things

Tags: Garage, DIY

We will send the material to you by e-mail

D For the rational use of space, communications and do-it-yourself garage accessories from scrap materials are used. It is necessary to involve walls in the process, underground level, place machines indoors, organize normal lighting.

Homemade gadgets for the garage

For comfortable operation of a room intended for car storage, you should adhere to certain recommendations:

the tool must be as accessible as possible;
storage spaces equipped with shelves/racks are much more convenient;
workbenches, inspection pit, homemade machines and DIY garage accessories expand the capabilities of the car owner;
the cellar allows you to save space;
The productivity of work and minor repairs depends on the quality of lighting.

Depending on the dimensions of the building, the area occupied by equipment, fixtures, and communications should not be more than 10–20% of the size of the garage floor.

Storage areas, racks, workbenches

In 80% of cases, do-it-yourself garage fixtures are built to store accessories, tools, and vehicle components. It should be taken into account that the most bulky parts of the car are sets of winter/summer tires, depending on the season.

It is more convenient to store wheels on brackets of the following design:

two triangular frames from a corner, connected by jumpers from any rolled metal;
triangles are attached to the wall, wheels are installed perpendicularly load-bearing structure, slightly falling between the jumpers.

This is the most economical option storing tires in the off-season. The most popular among car enthusiasts are straight and corner workbenches. The lower space is usually filled with shelves or drawers; sharpening machines, vice.

It’s easier to build a wooden workbench yourself, but it has a shorter lifespan than its rolled metal counterpart, which needs to be welded. If in load-bearing walls During construction, corners for shelves were not included; it is easier to make racks from rolled metal or lumber.

Original hanging shelves suitable for storing long items

The design and arrangement of shelving inside each garage is too individual to follow general recommendations.

Inspection pit and cellar

A necessary accessory for a DIY garage is an inspection hole. Moreover, the owner does not have to carry out all the repairs himself. Underground communications can be used in the following cases:

inspection of the chassis, steering, and brake systems before a long trip;
oil change, which allows you to save money and does not take much time;
minor repairs that can be carried out by the owner's qualifications.

It is more convenient to make the entrance to the cellar from a hole, as this will allow you to concrete several steps instead of using an extension ladder.

The main nuances of these designs are:

swelling of clay soils is harmful to underground structures;
therefore, all elements of the pit and cellar are insulated from the outside with expanded polystyrene;
sand or crushed stone is used in the underlying layer before concreting and backfilling of the pit sinuses;
Drains are laid along the perimeter of underground structures at the base level to collect and drain water.

The width of the pit should allow the driver to enter it without lighting.

Lighting and ventilation

More often used in garages parallel circuits lighting fixtures. One lamp allows you to use a specific area, several devices turn on during major repairs, visits to the cellar. Minimum consumption electricity is provided LED lamps. Daylighting devices have a greater resource.

Cars use toxic, harmful fuels and lubricants, so do-it-yourself garage ventilation devices that allow you to create air exchange are becoming relevant. The influx is organized from below:

garage - vents in the masonry, protected by bars;
cellar - pipe from the garage or from the street.

The hood is mounted under the ceiling of the cellar, the roof of the garage, or has the form of vents in the main walls at the highest points.

Ventilation in the garage with your own hands. From this publication you will learn why garage ventilation is so important, what air exchange schemes exist, and installation nuances.

Other useful ideas

Useful accessories for the garage with your own hands can be made from used dishes, equipment, and materials left over from construction. For example, by gluing the lids of plastic cans horizontally/vertically, the owner receives convenient transparent containers for equipment or hardware, which are always at hand.

Many accessories for a garage workshop can be made independently; the video below demonstrates some of them.

Garage homemade products are devices that make garage life much easier; in addition, they work no worse than factory machines. By equipping your workshop with such devices, you can independently produce the necessary parts for your car, as well as various crafts for your home or garden.

Video of homemade tools and accessories for the garage

It is difficult to predict in advance what devices may be needed when repairing a car, however, there are some homemade products, some of which are used most often. Some of them can be seen in the video below.

Drawings of homemade devices

A pipe bender is a useful household device that allows you to bend a metal or polymer pipe to a certain degree. Bent pipes are often used in the construction of greenhouses and greenhouses, installation of heating and other needs. Using the presented drawing, you can make a manual pipe bender yourself.

A vice is a practical device used when performing plumbing work. With its help, it is possible to reliably fix a part requiring metalworking in a certain position.

This device consists of several parts:

base plate;
2nd lips – movable and non-movable;
lever;
chassis screw.

Using a small-sized bench vice, the drawing of which is presented above, it is convenient to sharpen and otherwise process small parts.

Having a CNC milling machine in your home workshop allows you to perform a whole range of wood machining work.

A homemade milling machine consists of several components and parts:

bed;
calipers designed to move cutters;
caliper guides;
spindle with installed cutter;
microcontroller or switching board with microcircuits that provide automation of the machine;
electric motor with power supply;
drivers responsible for transmitting commands from the controller to the electric motor;
a vacuum cleaner for collecting sawdust generated as a result of the operation of the machine.

A DIY CNC milling machine allows you to perform engraving and milling work.

Homemade tools for car repairs

Another useful homemade device with which you can manually re-align your wheels yourself. Another version of this device can be seen in the photo below.

When carrying out major car repairs, you usually cannot do without a lift. A factory-made device is not cheap, and is not needed very often, so it can easily be replaced with a device made at home.

Homemade machines and devices for the garage

By making devices for tire fitting and balancing, you can carry out this work yourself, significantly saving money on car maintenance. In addition, such devices will come to the rescue if it is not possible to come to a specialized tire shop.

In your garage workshop, you can equip a universal tire changing machine using available materials - metal pipes and a hub.

When performing various crafts for the home, it often becomes necessary to drill a straight hole. This is difficult to do with a regular drill, but if you make a stand for the drill, like the one shown in the photo, then drilling without distortions will be much easier. This design can be made from various materials. For example:

made of metal;

made of wood.

Using the diagram presented below, you can make your own drilling machine from a drill.

Using a homemade press will allow you to produce products using the pressing method in a garage workshop. A similar device can be made from a hydraulic jack fixed to the top of the frame, which in turn is welded from scrap materials. The pressure in this case is directed downward.

Another version of a homemade press, the design of which involves attaching a jack at the base of the bed. In this case, the pressure process is carried out upward.

Using a homemade press, you can straighten, bend sheets of metal, compress cardboard, and fasten individual elements. The video below demonstrates how to make such a necessary device yourself.

Tool storage devices in the garage

Having order is the key to comfortable use of workspaces in the garage. Special organizers are designed to ensure this order in the workplace, allowing you to conveniently store and easily find the necessary tools. You can make such devices yourself, using available tools.

A simple and affordable way to store hand tools is a wall organizer made from tin cans attached to a sheet of plywood. Additionally, you can nail several hooks or nails to it to conveniently hang measuring and electrical tools. In the absence of tin cans, PVC pipes of various diameters can be used as holders, cut into pieces and screwed to a sheet of plywood or chipboard.

It’s even easier to make a special device for storing screwdrivers. To do this, you need to take a wooden block and drill holes of the required size in it. Mount the finished holder on the wall. On the same holder you can organize a storage system for chisels and chisels. It is enough to cut out special holes in a wooden blank. In the same way, you can make a holder for power tools by cutting out the corresponding holes in a wooden shelf.

An interesting way to store tools is shown in the photo above. Its principle is based on the use of magnetic tapes attached to metal strips. Using such a system, it is convenient to store drills, keys and other metal tools.
Convenient and practical organizers for storing screws, bolts, nails and other small items can be made with your own hands from transparent plastic jars with lids. To prevent them from taking up space, you should attach them by the cover from below to the shelf. This and other ways to store tools allow you to efficiently use space in the garage and have everything you need at hand.

The video below demonstrates how to set up a simple and convenient tool storage system in your workshop or garage.

Homemade woodworking tools for the home workshop

Homemade milling machines can perform one or more operations. Preference, of course, is given to multifunctional devices that save space in the garage workshop. With their help you can:
make indentations of a certain shape;
drill holes
make grooves;
process the workpieces.
The simplest milling machine can be made on the basis of a drill. To do this, it is fixed to a steel profile or to a plywood body, and a rotating clamp is placed opposite it. Parts are processed using special cutters held by hand.

Homemade lathe

Creating a lathe with your own hands allows you to make dishes, interior decor and furniture from wooden blanks. Such a device will become an affordable alternative to industrial production and will help realize your creative potential. A homemade lathe can be made from individual components and parts:

an electric motor used as an electric drive for the machine;
a headstock, which can serve as an electric sharpener;
tailstock made from a drill;
stop for cutters;
transverse guides;
a frame made of metal profiles or beams.

The headstock and tailstock of a lathe are the main working elements, between which a wooden workpiece is placed. The rotating movement from the electric motor is transmitted to the workpiece through the front headstock, while the rear one remains static, responsible for holding the workpiece. If you equip a homemade lathe with additional devices - a baluster, a trident, a copier and others, then its functionality will increase significantly.

The video below demonstrates how to make a lathe with your own hands.

If it is necessary to drill precise holes in metal, plastic or wooden parts, experienced craftsmen recommend using a drilling machine. Unlike a drill, which vibrates strongly during operation, this device provides high-quality results, regardless of the material and thickness of the workpiece. You can make a simple drilling machine yourself by using the same home drill, but installing it in a vertical position on a frame made of furniture board and attaching it to a metal stand. If necessary, such a machine can be equipped with an asynchronous motor.

As a rule, home craftsmen do not stop at making the machines themselves. Very often they work to improve existing equipment.

The video below demonstrates useful accessories for a lathe that expand its functionality.

Homemade metal tools for the home workshop

These do-it-yourself devices for the home workshop are designed to facilitate the metalworking process. They are usually made from scrap materials and tools.

Among the most popular devices are:

pipe benders;
press;
vice;
milling, metalworking, turning, drilling and thicknessing machines;
devices for sharpening drills, knives and other tools.

Homemade metal cutting machine

The video demonstrates how to make some useful household devices.

Taking into account the presented recommendations and drawings, any home craftsman will be able to make useful devices for the garage and machines for his workshop, arrange an ergonomic space in it, and realize his creative abilities.