Dimensions of children's chairs. DIY wooden children's chair: easy, simple and quick. Drawings, dimensions, diagrams

A product made by you is much more valuable. If you have a child at home, then the pressing question is how to do children's table IR with your own hands. After all ready product it will be much more expensive.

Design Features

Highlight different variants children's table made of wood. Choosing a high chair with a table will make feeding your baby easier. This way you will protect your baby and make the whole process easier for yourself. Also, dishes are placed on the mother's table to free both hands.

The folding children's table is made of the “ladder-stepladder” type. While its legs are moved, the seat level will rise. At this time, the tabletop is tilted to the back. The advantages of a folded tabletop are that it takes up minimal space, saving space.

The issue of rational placement of things and pieces of furniture is especially relevant if you are limited in square meters. Also, the folding product can be easily carried with you. Thanks to the high-quality design, you can not be afraid of the reliability and stability of the product.

You can see in the photo of the children's table a model with a low chair and a table. This option is suitable for older children who can eat themselves.

Transformer furniture is also in demand as it saves money for parents cash. One piece is used as a support, with which you can gradually increase the height of the chair. In this case, the tabletop unscrews and can be removed. Thus, the product is quite easy to sit on.

It can be seen from the drawings of children's tables. The first type resembles Soviet models, the second depicts more modern designs, equipped with convenient collection mechanisms.

One of positive points, going in favor wooden furniture, this is what can really be done wooden chair DIY baby feeding bottle. Naturally, in the case of twins, you will have to do two stools at once. Note that usually homemade children's high chairs made of wood are different - classic folding, transformable and growing.

In this article, in the “for dummies” style, we will tell you how to make a high chair with your own hands using the example of a wooden transforming chair. We will show two working options for a do-it-yourself feeding table and chair with drawings and dimensions, and also give some considerations about them.

ATTENTION!!! The article turned out to be long, since we are writing not only for experienced craftsmen, but also for beginners, as well as people who rarely do anything with their own hands. If you don’t want to read everything, use the table of contents. Heading tooltips will help you understand what it's about and choose what you need.

If you want to make a high chair with your own hands, but not a transformer, or you know everything - how to do it and like brevity, it’s also not a problem. Over time, a link to a post will appear in this place, where information about homemade high chairs will be collected in one pile. In the meantime, look at the site map and section, there are articles there.

The content of the article:

Do-it-yourself highchair - why a children's wooden highchair TRANSFORMER. MOTIVATION

One of the big advantages of children's wooden transformable feeding chairs is that the design of the chairs is extremely simple, so even a beginner can easily build them on their own. You can make such a high chair with your own hands either from scrap materials, or you can easily purchase the material at a low price.

In the article DIY baby high chair, we looked in detail at how a folding high chair is made. It turned out that it is done quite simply. But its relevance is very doubtful - wooden furniture is always bulky and heavy, and in two years such a chair will have to be disassembled for parts and made separately for a children's table and chair.

But the transformable chair immediately “kills” two birds with one stone: it is both a chair and a table-desk. First, the chair is used for its intended purpose, together with a small table, and then, after 1.5 years, it is disassembled, and the child gets a separate desk and chair. Convenient and practical. Perhaps this is precisely what arouses constant interest in a wooden transformable high chair made by hand.

All that remains is to figure out how to make such a miracle of technology yourself. First, let's look at a video of one of the craftsmen.

Do-it-yourself feeding chair or transformable wooden high chair for feeding a child with your own hands getting started

Searching the Internet on the topic of a do-it-yourself high chair, it will become clear that there are two options for a transforming high chair.

The first option is more complex, but for some reason it is the one that is popular on the Internet. Most likely, someone made it once wooden high chair a transformer for do-it-yourself feeding in exactly this way, and then articles on how to make it yourself miraculously and thoughtlessly multiplied. Because where to get it correct option unclear. We present here the most understandable (for the author) description and sane drawings.

The second version of a do-it-yourself feeding chair is simpler and more logical; it is the method used to make factory-made wooden transformers. And we will also present it here, with our own measurements.

If everything is clear with the material and you are only interested in drawings and dimensions for a do-it-yourself high chair, then immediately go below to the parts of how to make a do-it-yourself high chair - Option 1, and How to make a children's wooden high chair with your own hands - Option 2. A For now, since we decided to write a story in the “for dummies” style, let’s talk about the materials used.

DIY high chair - Materials

To make a high chair with your own hands you will need wooden blocks. A board with a thickness equal to the thickness of the bar used can be added. Plywood or chipboard, self-tapping screws, glue, washable fabric upholstery and any soft filler. Well, also staples for a construction (furniture) stapler.

You can use any timber that is sold or available. It would be better if it were planed. So there is less fuss with him. Otherwise, you will have to plan it yourself and make it smooth. It is most convenient to take a timber size of 20x30 mm.

As a table top for a desk table and a small removable table for a high chair, laminated chipboard or thick plywood - from 10 to 15 mm thick - will be used.

The hard parts of the back and seat of a do-it-yourself feeding chair can be made from fiberboard or plywood. It is not necessary to use thick plywood; 5 to 10 mm thick is sufficient. In general, plywood will be stronger, but the staples of the stapler fit into the fiberboard easier.

Some parts are glued together. To do this, you can use wood glue or just PVA glue.

To make a soft back and seat for a high chair with your own hands, you will need external upholstery - durable, easy-to-clean fabric, such as raincoat fabric or bologna, or just oilcloth, and inside there is soft filling - foam rubber, batting, padding polyester or something else. See for yourself how much you need. The soft filler can be glued to the hard parts of the back and seat, or simply fastened with a construction stapler, or you can combine both options. It’s easier to immediately fasten the upholstery with a stapler. It will be more reliable this way. The size of the staple depends on the stapler and the selected thickness of upholstery.

It’s also a good idea to have a medium sandpaper to sand the parts and make them smooth.

In the first version of the do-it-yourself high chair, only 4 wood screws are used: to attach the table top to the desk table. Other wooden parts connected to each other with homemade dowels, also made of wood. You can use the remaining bars on the dowels.

In the second version of the do-it-yourself feeding chair, there are practically no dowels, but there are many self-tapping screws for fastening all the parts together. Factory transformers are made using Euro self-tapping screws, and a children's wooden transforming highchair for feeding with your own hands can be assembled using any type. The main thing is to assemble it correctly. Dowels are used only if you decide to make rounded parts that are convenient to attach to the bars with their help.

In both versions wooden table and a do-it-yourself feeding chair have rounded elements, although you can do without them. These elements can be made either from a board with a thickness corresponding to the thickness of the bar used. If the beam is taken, as here, 20x30 mm, then we take a board 20 mm thick, but 30 mm is also possible, it depends on how you lay the bars, just kidding). If there is no board, then the same bars are perfect. You just need to glue them together.

Depending on how many and how you arrange the rounded elements for cutting on the board or glued bars, this is the length of them (boards, bars) you should take. 4 elements must be laid at once on glued bars or boards. Therefore, the length will be from 0.5 to 1 m, and maybe 2 m will not be enough.

DIY high chair - some words about wood and paintwork

I suggest you pay attention to the wood material of the high chair. Let us immediately note that it is best to make a children’s wooden feeding chair from linden with your own hands. However, like any other children's furniture for kids. Since coniferous trees, often used in the manufacture of wooden furniture, may not be suitable here: pine emits resin, which is very toxic. It’s better not to risk children’s health. However, construction stores often stock pine, so we try to take it as dry as possible and free of resin. Believe me, it will be better for the child, and it will be easier for you to do it yourself.

For added shine, color and protection environment It is better to use ACRYLIC varnish or paint. It is not as harmful to the baby as the others. Why him? The answer is - what if the baby tries the table or high chair that you made yourself? You are the one responsible for the consequences. Although, if this does not bother you or there is no way to get them, then you can cover the feeding chair with your own hands with whatever you want.

Do-it-yourself wooden transformable baby high chair - Option 1

To understand what a do-it-yourself high chair in the form of components Option 1, we provide drawings and dimensions.

To make parts of a wooden transformable baby high chair with your own hands, take a beam with a cross-section, for example, 20x30mm. We will make the following parts from it. We indicate the length and quantity.

Legs – 390 mm, 4 pcs.
Rounded parts – 4 pcs.
Armrests, also known as the upper crossbars of the chair – 195 mm, 2 pcs.
Planks running parallel to the armrests, also known as crossbars, 335 mm, 2 pcs. We will then attach the seat with the crossbars of the feeding chair to these crossbars
The slats on which the seat and backrest are attached, also known as crossbars – 300 mm, 3 pcs. Two for the seat and one for the back
Small table on a chair (H x W) 340X340 mm. It lies on the armrests of the chair 340 mm = 300 (length of the chair crossbar) + 20 + 20 mm.
The seat and back have the same dimensions (H x W) 250 x 290 mm. Width 290 mm = 300 (crossbar length) – 5 – 5 (gaps on both sides for upholstery and soft filling), mm.

Legs 500 mm 4 pcs.
Planks for the lower and upper parts 410 mm 4 pcs. The feeding table is placed on the lower slats, and the table top is mounted on the upper slats.
Cross bars 340 mm 4 pcs. To fasten the sides of the table. Length 340 (mm) = 300 (chair crossbar length) + 20 + 20 (mm). This is done so that the chair fits between the sides of the table.
Tabletop (H x W) - 440×380 mm. 1 PC. The tabletop rests on the upper slats and does not protrude beyond the sides. Width 380 (mm) = 340 (crossbar length) + 20 + 20 (mm). Length 440 (mm) = 410 (top bar length) + 30 mm

How to make a high chair with your own hands

Work begins with a chair. To do this, bars are cut to the required length according to the dimensions. Separately, you need to make rounded parts - they connect the legs and armrests at the front and back. Naturally, all sawn parts must be made smooth, lint-free and treated with special care with sandpaper - small children are always an increased risk of injury. Therefore, to the question of how to make a high chair with your own hands, we give a pretentious answer - we work conscientiously.

The curves for the wooden transformable high chair for feeding are cut out separately - according to the drawing. For rounded parts there is one IMPORTANT point. If you glue the bars together and position the part with wood fibers differently than shown in the figure, then such a part may break in the most unexpected way during sawing or further use. Therefore, the bars must be glued together with wood fibers parallel to each other. And you need to place the round part of the high chair with your own hands along these parallels. The same applies to the board - we place the part to be cut parallel to the wood fibers of the board.

To successfully glue the bars together we use wood glue or PVA. Additionally, the bars do not need to be jointed or leveled. You need to select fairly even planes for the bars, position them correctly and simply press them harder with clamps. They will dry out within a day for sure.

Then you can make rectangular dowels from scrap scraps for a high chair with your own hands. Dimensions – 8x20x50 mm. In general, the length of the dowel should be 4-5 mm less than the total depth of the groove of the two parts being fastened. The edges of the dowels can be slightly rounded.

Mark places for dowels on all parts. To do this, you need to mark the contours of the groove, for example, with a pencil. Rectangular grooves for dowels should be made approximately 30 mm deep. To do this, drill 4-5 holes with a drill with a diameter of 6 mm. Next, using a chisel, level the walls of the groove and adjust it to fit your individual, homemade dowel. And if you have a router, then we make the grooves with a router, it’s easier.

When all the parts are ready, there are dowels and grooves for fastening, you can begin assembling a wooden transformable highchair with your own hands.

Do-it-yourself wooden transformable high chair for feeding a baby - assembly

We begin to assemble the wooden transformable high chair for feeding with our own hands from the sides. First one is done, then the second. Draw a line on the dowels in the middle of the length. Using a light hammer, install to the marked line. Then we take the part to be connected and insert the dowel into it. We connect the parts first dry, i.e. without glue. After all the sidewall parts are connected, we check for the presence of cracks. If everything is fine, then carefully separate the parts and glue the dowels, and then reassemble them as indicated above. Then you need to tighten the parts and let them dry for about 1 day. You can tighten them with clamps, or wrap them tightly with rope on both sides. But at the same time, make sure that nothing is skewed and there are no gaps. It is less reliable to tighten with a rope than with a clamp, but not everyone has clamps of this size.

While the sides of the transformable high chair for feeding the baby are drying, you can start making the seat and backrest with your own hands. They are cut from plywood or fiberboard, according to the drawing. If the plywood is not thick or fiberboard is used, then to add strength it is better to cut out 3 parts of the seat and back and glue them together. Coat with glue and clamp with clamps. It also dries within a day.

After the sides, seat and back are assembled and cut out, we assemble everything completely. On the seat and backrest with planned reverse side For a wooden transformable high chair for feeding a baby with your own hands, you can immediately attach the crossbar strips. To do this, use either dowels or, which will be even easier, small self-tapping screws. To make it work properly, the planks must be attached with gaps of 5 mm on each side along the width of the seat and backrest. The back and seat can be connected to each other with a metal corner, or a metal strip bent along.

If we do it on dowels, then we drill holes in the seat for fastening to the crossbars of the chair. It is better to attach 4 pieces. standard cylindrical dowels. For the back of such dowels - 2 pieces. We connect the sidewalls with crossbars on which the seat will then rest. We do it without glue to check and see the positions of the seat and backrest. Also, without glue, we place the seat on the crossbars on the dowels. When bending and bending the backrest, mark the position of the bar for fixing the backrest, and then disassemble it. If you wish, you can cut off the side of the backrest strip according to the drawing. There is no desire - everything will be fine too.

For a wooden transformable children's high chair, we cover the seat and back with a soft filler with our own hands: glue it to a hard part or nail it with a stapler. Then, again using a stapler, we stretch the upholstery. It’s better not to save money and not try to upholster and soft part secure with the same bracket. Something might get warped and it won't be good.

Then we assemble all the parts on dowels coated with glue. We put it in place, check the corners. We attach the backrest bar to the backrest with 2 cylindrical dowels. We check the gaps and tighten them with clamps or rope. We are waiting for it to dry. That’s it, the chair from the wooden transformable high chair for feeding with your own hands is ready .

We repeat. If you don’t want to tinker with dowels, you can really connect all the parts using ordinary self-tapping screws. It may not be as durable, but it will be easier to assemble. It's up to the master to decide, of course. And the most convenient and durable way to fasten the curves is with dowels, and then carefully coat them with glue. After this, leave the finished sidewall to dry for a day.

Last step: cut according to size small table DIY high chair. It can be left rectangular, or it can be rounded in the part closest to the child. This is not important. It's just a matter of aesthetics and fuss. This table is attached to the edges of the armrests. It is possible on cylindrical dowels, it is possible on self-tapping screws. And when the child grows up, it is simply removed and that’s it, it is no longer needed.

The table for the high chair is assembled with your own hands in the same way as the chair. First dry, then with glue. Either homemade dowels or self-tapping screws are used. Let's start with the sides. We attach the upper and lower strips to the legs, we get two rectangles. When the sides are assembled, they, like the chair, need to be pulled together and waited a day for them to dry.

Next, the transverse bars are attached - with their help, the sidewalls are connected. We attach the crossbars for the feeding table with our own hands according to the drawing. The general idea is that they should be at unequal distances from the edges of the sidewalls. On the lower ones, which will be closer to the edge, there are high chair legs in the high chair position. And the top ones serve as spacers for the legs of the chair so that the chair stands firmly.

Sawed from plywood or laminated chipboard table top It is attached from above to the upper parts of the sidewalls and screwed with self-tapping screws. Everything comes together and tightens as usual, wait until it dries.

When the do-it-yourself feeding chair table is ready, let’s turn it into a transformable high chair for feeding a baby. To do this, let's connect them. The table is turned over, the tabletop is at the back, and the chair is placed on the transverse slats of the table.

DIY wooden transforming table for feeding a baby - finishing touches

Finally, when the chair and table are ready, we check for roughness one last time and sand it if we find any.

When a high chair and a transformable wooden table for feeding a child are made with your own hands, they should be completely varnished - use exclusively non-toxic varnishes, or paint them acrylic paint. You can first stain and dry it to give the desired color.

That's it, the first option is ready. The most adequate description was found on http://mebelsam.com; material for the note on the first option was taken from this site.

DIY wooden transformable baby high chair - Option 2

To understand what a do-it-yourself high chair will look like in the form of components of option 2, we provide drawings and dimensions.

To make parts of a wooden transformable baby high chair with your own hands, take a beam with a cross-section, for example, 20x30 mm. You will need to make the following parts from it: indicate the length and quantity.

DIY high chair parts sizes, length and quantity

If there are no round parts

Legs 450 mm 4 pcs.
Armrests – 365 mm 2 pcs.

If there are round parts

Front legs 450 mm – 2 pcs., rear legs 390 mm – 2 pcs.
Armrests – 290 mm 2 pcs.
Rounded part according to the diagram – 2 pcs.

General

Bottom strips on the sidewalls 365 mm 2 pcs.
Cross bars 350 mm 4 pcs. The seat and back are attached to them.
Seat (H x W) 290X330 mm
Back (H x W) 450Х330 mm

DIY feeding table spare parts dimensions, length and quantity

Legs - 450 mm 4 pcs. The legs located in the middle of the table are the lower bars of the sidewalls.
Lower and upper crossbars, on which the feeding table stands in the table-desk position, and to which the tabletop is attached - 500 mm 4 pcs.
Cross bars 410 mm 3 pcs.
Tabletop (H x W) 500x510 mm
Fastening strips for chair legs, length 230 mm. ATTENTION – in the diagram the thickness of the bars is 15x15 mm, but you can use any. For example, the same 20x30 mm.

Do-it-yourself wooden transformable high chair for feeding a baby - Main differences from option 1

The previous part about a wooden transformable high chair for feeding a child with your own hands turned out to be too voluminous. Therefore, in order not to write a sheet again, let’s say that everything is done according to the drawing and dimensions similar to the first option.

Dowels are not used, with the exception of the rounded parts of the high chair. They are made in the same way as in option 1, only they have different sizes. Everything else is held together with self-tapping screws. You can use ordinary ones made of wood, or you can use euro ones. If you use euro-tapping screws, then mark the places where they should go. And in a place with a smaller diameter we drill a hole for them.

Do-it-yourself high chair - making parts and assembling

The bars are cut according to size. Carefully processed with sandpaper. The fundamental difference from the first version of a do-it-yourself high chair is the absence of special round parts. But since sharp corners- this is an increased danger for a small child, then they need to be rounded. It is the upper parts of the chair legs that are slightly rounded on one side. And the two lower crossbars of the table—the legs on which it stands—are also rounded.

You can also insert several blocks in the sidewalls between the armrest and the bottom bar to which the seat is attached, rectangular or round, it doesn’t matter. They can be placed anywhere at any distance, most importantly in the seating area. This is to prevent the baby from crawling through the sidewall, and it’s also good for beauty.

One more touch.
How to make a high chair with your own hands with a movable back? You can make the back of a DIY feeding chair take several positions. You'll have to tinker with this.

To do this, the rear legs and armrests are fastened together using a round part, as was the case in the first version. In this case, the size of the armrest and back leg will be different (see description of the dimensions of the chair). In the rounding you need to make a hole into which a screw will subsequently be inserted, with a handle - a fastener at the end. One side of the screw is attached to the back of the chair, the other goes along this hole. The handle screws onto the edge and secures it in the desired position. The back is fixed.

The hole can be made either with a router, or several small holes can be made with a drill and then finished with a chisel. The size of the hole depends on the screw used. The handle can be whatever you like. In the handle, carefully select a groove for the nut, which will actually be screwed onto the screw and secure the back of the chair. It is convenient to fasten the screw itself not in the back of the chair, but in the upper crossbar.

Let us note once again that it is more convenient and better to fasten the curves of a high chair with your own hands using glued dowels. Using self-tapping screws will be awkward and clumsy.

This particular chair option is very comfortable for a baby, but to make it you will have to put in some effort. If there is no desire, then it is realistic to do without a movable back, then there is no point in making a separate rounding. Just tilt the back as comfortable for you and your baby. We mark the place where the upper transverse bar touches the folded back and side panels. Let's drill a hole there. We fasten the side panel and back with a self-tapping screw. So on each side.

When the sidewalls for a baby high chair are assembled with your own hands, two transverse fastening bars for the seat and one on a movable cylindrical dowel for fastening the backrest are screwed to the lower bars of the sidewall. A movable dowel means that one of the grooves is several (mm) larger than the diameter of the dowel.

The back and seat are done in the same way as in the first option. Only the sizes here are slightly different - the back is longer. It's more convenient for the baby. It is also not necessary to fasten the seat and back together; it is enough to attach them to the transverse slats, and subsequently make them soft and upholstered, for example, with oilcloth. Before upholstery we sand and paint as usual.

That’s it, the do-it-yourself wooden transformable baby high chair is ready.

DIY High Chair Table

The table for the high chair is assembled with your own hands in the same way as in the first option. First the sides. When the sidewalls are assembled, they are fastened together by transverse strips located at the bottom - they also serve as stands on which the assembled chair stands. This is important because the high chair is installed on them, and this plays a role in its secure installation.

This differs from the previous option - there is no additional crossbar in the middle at the bottom of the table, which makes the table not closed, and it is more convenient for an older child to sit at it. In this case, two crossbars go only from below, where the tabletop is attached - there is only one crossbar. When everything is assembled, all that remains is to screw the tabletop.

There is one point here.
How to make a table top for a transformable high chair with your own hands? The figure shows the diagram and dimensions of the version with grooves. For simplicity, you can simply place the tabletop of the feeding table with your own hands on the bars as in the first option, or you can press it between the bars as they do in the factory. The first option is simpler, but the screws will be visible in the most inappropriate place. The second one will require more fuss, but it will be more beautiful. To clamp between the bars, you need to make grooves in them. This can be done without any problems with a router or just a chisel, but it takes longer. Accordingly, the dimensions of the tabletop will be different. There is a plan to make the groove the thickness of the table top and a depth of 5 mm.

For greater stability of the high chair standing on the table, in the assembled form of a wooden transformable baby high chair with your own hands, you can additionally make four small blocks - two on each side. They are located under the countertop; it is better to install them “after the fact”. Those. When the table and chair are ready, we place the chair on top of the table, as it should be in the end. Mark with inside on the sides of the table, where the legs of the chair closest to the tabletop go. Along the sides, parallel to the markings, we attach these blocks to the sides of the table, one on each side. As a result, it should turn out so that the legs of the chair closest to the tabletop pass between these bars, and they, in turn, prevent the chair from moving in different directions. This gives the chair additional stability.

The DIY feeding table is ready.

DIY high chair - summary and some conclusions

As usual, summing up the results, we talk about what is easier - to make a high chair with your own hands, or to buy it? The answer is clear - buy. Moreover, wooden transformers are very common today and are inexpensive. But there are people who want to make their own efforts and imagination, and maybe someone hasn’t sorted out the rubble of their building materials. Then let's go - creativity has been valued at all times.

The first option is, of course, the most common on the Internet, but it is not the simplest. There you have to tinker with dowels, make grooves, glue parts together. It’s great if you have a special large clamp, since a regular rope can warp the part. And if you don’t compress the details completely, then maybe nothing will work out at all. In short, a lot of fuss. In addition, over time, such a product will definitely dry out, remember the old swaying chairs. And your child will definitely rock the ready-made do-it-yourself high chair you made.

The second option is not common on the Internet. But this DIY high chair looks like a factory transformable high chair. Assembled with self-tapping screws. The main thing is to ensure that when assembling the mating parts of the parts are at 90 degrees to each other and are not warped. Little fuss. Only if you want to make a movable back with a rounded element, then you will have to work hard.

At one time, when they wanted to make a children's high chair wooden transformer with our own hands, we knew the first option. But it seemed a bit complicated. And then, when we bought a factory one, we found its dimensions and realized that it was no worse, and maybe even better, than the first option. If we had to do it ourselves another time, we would choose the second option.

How to make a high chair with your own hands, video of craftsmen

In principle, every craftsman makes his own transforming high chair for feeding with his own hands. So to speak, according to your needs and with your capabilities. The most understandable and popular videos are collected here. From them it will become clear that the timber can be of any size. The dimensions of the feeding chair itself can also be any. The main thing is to grasp the essence of the design and sequence - how to make a high chair with your own hands.

Purchased furniture for a child’s room, especially from natural materials, can be quite expensive. In a store or online, you don’t always find exactly the option you like. You can create a children's high chair and table from wood yourself. The work will not be difficult if you prepare all the necessary parts and tools, use your ingenuity and imagination. The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.

You can create a children's high chair and table from wood yourself.

A DIY chair will cost much less, and one made according to your own sketch will meet the intended parameters and the required degree of comfort for the baby.

The reward for the work is a unique product, as comfortable as possible for the baby and practical in home life.

All details from natural wood can be purchased in specialized departments of construction stores. They will select boards and bars of the required sizes for you.

A DIY chair will cost much less.

A children's highchair, created with one's own hands, is high-quality furniture for a child. In the process of work, you take into account the dimensions of the seat and backrest, which are as comfortable as possible for a growing baby, and check the strength of the structure directly at home.

All natural wood parts can be purchased in specialized departments of construction stores.

A wooden chair created by yourself can be decorated to your liking, and not be satisfied with ready-made solution purchased furniture.

They will select boards and bars of the required sizes for you.

Required materials and tools

To create a chair you will need various materials. Individual parts will be made from them. First of all, these are wooden blocks and boards from which the frame, seat and back are assembled. Instead of natural solid wood, you can use chipboard or plywood, but these materials are not durable. For fastenings, take sufficient self-tapping screws. You will need medium-hard sandpaper.

A children's highchair, created with one's own hands, is high-quality furniture for a child.

Dimensions of bars (length):

support legs – up to 20 cm;
seat frame connecting strips – up to 20 cm;
backrest lintels – up to 20 cm.

A wooden chair made by yourself can be decorated to your liking.

During the manufacturing process, the thickest bars with a cross-section of 5x5 cm are used for the legs. For the planks, parts are taken with a diameter half the size of the supporting ones.

For the planks, take parts with a diameter half the size of the supporting ones.

The parameters of the seat board (height and width) should also not exceed 20 cm. The back part may be slightly higher, but preferably no more than 30 cm.

they are less durable;
The environmental friendliness of such products has not been 100% proven.

The parameters of the seat board (height and width) should also not exceed 20 cm.

To make a chair with your own hands, you need the right tools:

screwdriver;
screwdriver;
jigsaw;
hacksaw for wood.

The dorsal part may be slightly higher, but preferably no more than 30 cm.

The assembled chair will “require” original decor. In addition to the carved option, you can use paint or other materials to apply a design or appliqué. For careful application images will need a stencil.

The assembled chair will “require” original decor.

Deciding on design and construction

For a wooden product, you can come up with any option. A highchair is usually made with straight supports and the following forms of the back structure:

solid square or rectangular;
wide truncated cone;
straight through (with jumper bar).

To accurately apply the image you will need a stencil.

Creating a product with your own hands requires careful preparation. You must first make a sketch of the project. Visually draw a diagram of the connections of all parts separately with calculations of sections and lengths. Following the sketches, you will recreate the model in reality with exact parameters. A chair that has all the right dimensions will fit the baby and will not create any inconvenience.

For a wooden product, you can come up with any option.

Certain models are created with the expectation that the child will sit at a common table with other family members. In this case, high legs are chosen for the product, which are not attached exactly vertically in relation to the seat and floor, but more widely. Bottom part such a chair will look like a truncated cone, connected for stability by wooden blocks around the perimeter. The top part will be approximately 30-35 cm below the table level.

A children's highchair is usually made with straight supports and the following forms of the back structure

If you have certain skills, you can assemble a folding product. Such items can be easily removed if necessary into storage areas.

For selected design solution parts are processed in accordance with it.

Manufacturing process: step-by-step instructions

After preparing a drawing with exact parameters, we begin to assemble a simple children's high chair.

Calculate the length of the legs exactly according to the diagram, saw off the excess with a hacksaw.
Cut out the jumper bars to size that will secure the frame in the seat area.
Connect them to the supporting structure. Add furniture glue for reinforcement.
Attach the pre-sized back and seat using self-tapping screws.
All wood parts must be cleaned with sandpaper to avoid any roughness or burrs.

A chair that has all the right dimensions will fit the baby and will not create any inconvenience.

If the parts are disproportionate, “adjust” them according design scheme using a hacksaw. To make the chair you created with your own hands comfortable, ask your baby to sit on it, ask how comfortable he is.

If all sizes were determined correctly, the child will like it New furniture. To ensure the parts are smooth, sand the surface again.

Certain models are created with the expectation that the child will sit at a common table with other family members.

To varnish the product, use only safe compounds - a special coating for children's furniture, environmentally friendly and having the appropriate certificate.

The top part will be approximately 30-35 cm below the table level.

After exterior finishing varnish, let the chair dry thoroughly for a day or two. Then you can start decorative finishing, if such is intended. If it involves carving, then varnishing is done after finishing the artistic treatment and sanding the parts.

Decorating a chair

Use a jigsaw for carving. You can make a decoration in the form of a flower by cutting it in the center of the back, or any geometric figure. First, mark the area of the future decoration with a pencil so that the carving is even. Parts such as legs and back can be carved. The corners of the seat can be rounded using a jigsaw and sandpaper.

During the manufacturing process, the thickest bars with a cross section of 5x5 cm are used for the legs.

The top can also be made not strictly rectangular, but a truncated cone, rounded, compound. IN latest version You will need additional bars and cross bars - one or two. They are secured using special holes at the junction with the dorsal frame. This is a rather labor-intensive process, but if you wish, you can choose this option.

For fastenings, take sufficient self-tapping screws.

All steps for processing parts must be performed before the chair is assembled - this way the work process will be faster, more convenient and neater.

If you have certain skills, you can assemble a folding product.

To make a home-made piece of children's furniture look more interesting, you can apply a design to the back and seat. To do this you need to use safe paints. The color scheme should be bright and cheerful. Simple ornaments, floral patterns, and imitation of children's toys, such as cars, look great on wooden furniture.

Instead of natural solid wood, you can use chipboard or plywood, but these materials are not durable.

Due to the small size of the product, large drawing will become a kind of accent that attracts the child’s attention - he will like to sit on such beautiful chair, play a game or have breakfast.

You can use appliqués for decoration – there are plenty of adhesive bright films on sale.

The image will turn out smooth if you use a stencil pre-cut from paper or thick plastic.

You can use appliqués for decoration – there are plenty of adhesive bright films on sale. Whether the image will be monochromatic or multi-colored depends on your imagination.

First of all, these are wooden blocks and boards from which the frame, seat and back are assembled.

In the seat or back trim baby chair It is not recommended to use bulky (protruding) parts, both small and large. Firstly, it is inconvenient for the child, and secondly, they quickly fall off when frequent use products.

To create a chair you will need various materials.

VIDEO: DIY high chair

Making it yourself - regular or for feeding, is not such a difficult undertaking. Even if you don’t have much experience working with wood. The basic design is simple, there are a lot of options for the degree of complexity, and the work does not require any special tools.

The main thing is to determine how much weight the product should support.

The choice of material for is determined by financial capabilities and skills home handyman. It is much easier to make a seat from plywood, and if for some reason the workpiece turns out to be unusable, duplicating it will not make a hole in your wallet.

Solid wood – beech is considered the best. Its wood is dense, medium hard, but much easier to process than oak. If the cost of the material is high, then you can use solid birch or pine. Preference is given to breeds deciduous trees.

Before manufacturing, it is recommended to subject pine to a procedure such as de-resining. Wood contains quite a lot of resin, this will interfere with work, and in the future may cause resinous dirty spots to appear on the surface.

Plywood is a multi-layer material made from hardwood and coniferous trees. Perfect for a children's highchair, as it is light in weight and very easy to handle. With minimal skill, a plywood chair can be made very beautiful, with slotted carvings. In addition, plywood bends easily, which allows you to make the back curved.
Chipboard is the most a budget option and the most short-lived. The strength of the material itself is quite sufficient for the loads to which children's furniture is subjected, but the ability to hold fastenings - screws, nails - is low for this material. As a rule, they are made from chipboard flat parts like a feeding table or seat.

The selected material must be available in the following form:

bars - 20*40 mm on average, or more - up to 50*50 mm;
boards – 25 mm thick;
furniture panel, if the material chosen for the seat and back is solid wood, or sheets of plywood and chipboard.

The product is best mounted on dowels - wooden bushings. They are inserted into holes when joining parts and hold them together. This is the most reliable way. But self-tapping screws, nails and even metal corners can also be used.

Quite a few hardware stores offer their services for cutting wood materials to size. If you have little experience working with wood, it is better to take the help of professionals.

If you plan not only to assemble the parts, but also to completely make a wooden children’s chair with your own hands, then you will need the following tools:

jigsaw or wood saw for making blanks;
screwdriver if metal fasteners are used;
a sanding machine or sandpaper of varying degrees of grit - all parts of the children's chair must be sanded and polished to prevent injury;
hammer - used to seal the joint;
brushes, varnish or paint on water based.

Is your child still very young? Then the following video will help dad create a high chair for him:

Drawings and diagrams

You can always use a ready-made drawing of a children's chair with your own hands, found on a construction site. The best in such cases are the sketches presented on the forums. Firstly, they contain the maximum possible amount of information. Secondly, the questions asked on the forums and the answers received can clarify many difficulties that arose along the way.

Before you begin manufacturing, you need to make sure that the dimensions indicated in the drawing suit your child. If not, then the parameters need to be increased proportionally, since the stability of the product depends on the correct ratio of height and width.

If you decide to develop the drawing of the chair yourself, then it is recommended, after calculations, to make a test model from ordinary construction cardboard. Thus, the proportions, height and stability of the model can be checked by the most the best method– practical.

Children's high chairs - from 0.5 to 6 years old, are made according to two main schemes.

For feeding - a stationary or folding product that contains a table. There is no need to seat a one-year-old baby at a common table: her feeding schedule is completely different, and she still doesn’t know how to eat with everyone. An individual table taking into account the height and weight of the baby is a much better option.
An ordinary chair - that is, the one that is necessary for studying at the table and for playing. Its shape is similar to that of an adult chair, but the execution may vary.

Traditionally it is a frame with four legs, a seat and a backrest. However, for children, a good option would be products made from two sides, a seat and a back. The first model is usually made of wood, the second - of plywood and chipboard.

Drawings of chairs for children

Drawing 1 Drawing 2 Drawing 3 Drawing 4

Manufacturing process

Furniture production can be divided into 3 stages: preparation of material, cutting and assembly of the product. A fourth option is also possible – finishing. The sequence is the same when making any model, but the work itself will depend on the complexity of the design and the selected material.

The following video will help you make a beautiful and bright highchair:

Preparation and production of parts

Often these stages are carried out in parallel to each other. The material in the store does not always have a sufficiently low degree of humidity - 12–16%. Therefore, it is advisable to dry the wood additionally. Also, any of the wood materials must be acclimatized. Therefore, before starting work, it is recommended to leave wood, plywood or chipboard in the room for at least a day.

Cutting bars, boards and sheet material can be done independently, or to order in a workshop at the store. Standard drawing high chair includes the following elements:

legs for table and chair - 4 pcs. for each part of the product. The bars are cut to size using a jigsaw and must be treated with sandpaper;
upper and lower crossbars – 2 pcs. also made from bars;
crossbars – 3 pcs. for a chair and 4 for a table. The bars are sawed on a workbench or on a table, held in a vice. A miter box is used to cut 90 degree corners;
roundings - 4 pcs., cut from the board. In this case, the wood fibers must be perpendicular to the bending angle. Otherwise, the part breaks easily due to internal stress;
The tabletop and seat are cut from a sheet of plywood, wood or chipboard to size.

If the chair is made entirely of plywood or chipboard, then all the parts - the sides, the partition connecting them, the seat and back - are first drawn on a sheet and then cut out with a jigsaw.

The following video will tell you how to make a children's chair from chipboard:

Product assembly

The best option is to connect with dowels. The latter are easy to make yourself from a board. The bushings have rectangular shape, their edges are sanded.

Holes are made in the parts of the product for dowels: first, with a drill of a smaller diameter - up to 6 mm, then widened with a chisel to 8 mm.
The parts are attached with glue - wood glue, PVA, etc. Before making the final connection, it is advisable to carry out the installation without glue to ensure that the dowels and holes are in the correct position. the right level, and the angles are respected.
For the most durable fastening, proceed as follows: place the parts on a dowel, tap with a hammer to fit the elements as tightly as possible, and then secure them in a clamp for a day. Making the chair will take longer, but its reliability will be much higher.

All parts according to the drawing are connected to dowels using the described method. If we are talking about a plywood chair, then its elements are cut out with tongues and grooves, and connected in the same way - with glue.

Bright children's homemade chair

Chair finishing

The easiest way is to open it with water-based acrylic varnish. The color and gloss level of the varnish are determined at will.
You can paint the product with water-based acrylic paint. Although it is not as stable as the oil composition, it is completely safe.

On the seat, and sometimes on the back, a soft insert is made of foam rubber and a fabric cover. It is better to choose a fabric that can be easily washed, as it will get dirty quickly.

To provide your child with comfortable, durable, beautiful furniture without spending a lot of money, you need to do it yourself. Start with less - try making a highchair with your own hands. Look at the photographs of similar pieces of furniture presented on the Internet, ready-made diagrams, drawings, determine what dimensions the finished product should have, how it will fit into the interior of the children's room, etc.

Which material to choose?

The choice of manufacturing material is of no small importance. Of course, it will depend on the financial capabilities and skills of the master, but the factor of its naturalness and safety for the child’s health should not be overlooked. In the production of children's furniture, it is best to use raw materials from deciduous trees. The advantage belongs to beech, since its wood has good density, hardness, and is easy to process (for example, compared to oak). You can also use linden and birch. Coniferous species - pine, spruce, but to prevent resin stains from forming on the surface of the product during operation, the wood must be deresined.

When choosing wood for a chair, be sure to ensure that the pieces are free of knots. Such areas of wood are less amenable to processing and are less strong. Active use of the high chair can lead to breakage at the knot, resulting in injury to the child.

To inexpensive wood materials include plywood. It consists of several layers of veneer of coniferous and deciduous trees. In addition to its low price, the advantages of plywood include light weight and ease of use. The elasticity of the material allows you to create original curved shapes of various parts

Chipboard is considered the most short-lived but cheapest material. A significant drawback is the use of formaldehyde and phenol-formaldehyde resins (6-18%) in its production. Also, chipboard does not have a dense texture; because of this, the fastenings are not reliable. In children's furniture, flat parts are often made from chipboard (as well as from plywood): seats, backs, table tops.

What you need to make a wooden highchair

We offer drawings and manufacturing procedures for a children's chair. Its dimensions:

product height – 630 mm;
distance between legs: depth (from front to back) – 280 mm, width (between front/rear) – 320 mm;
length of legs: rear – 630 mm, front – 410 mm.

For a more reliable connection of parts, self-tapping screws and tenons will be used simultaneously.

To make a wooden chair for a child with your own hands, you need to prepare the following materials, tools and fasteners in advance:

We will use a block with a cross section of 50x50 mm in the construction of the frame.
20x40 mm block for stiffening ribs and crossbars.
We will make a chair seat from plywood, a board or a piece of solid wood 30x10 mm.
To enhance the reliability of perpendicular connections, we will use metal corners.
Electric jigsaw or hacksaw.
Plane.
Screwdriver or electric drill.
If fastening will be done using spikes, you will need an electric router.
Sandpaper or sander to make it smooth wooden surfaces.
Tape measure, square, ruler.

Step-by-step instruction

First of all, you need to cut off 4 legs from the timber (20x35). 2 of them should be 410 mm long and another 2 – 630 mm. Then we prepare 4 connecting strips (from the same timber) 280 mm long. They will be assigned the function of stiffening ribs, as well as handrails.
Using spikes of a standard diameter (from 8 to 10 mm), we connect the left legs: the short front and long back. IN in the right places The parts to be connected are drilled with an electric drill. For a strong connection, the hole must have a diameter 0.5 mm smaller than the tenons. Then generously lubricate each hole with glue and firmly drive the spike into it.

Next, we connect the front and rear legs with crossbars at a height of 250 and 410 mm (we get the height at which the seat will be installed).
Similarly, in the same sequence, you need to do the right legs - connect the front and back.
The places where the chair legs connect with the crossbars are additionally reinforced with metal corners. We fasten them with self-tapping screws.
Upon completion, we compare the two resulting designs. They must mirror each other, otherwise the chair will turn out uneven.
We fasten both halves together using 20x20x310 mm bars. We drill holes in the crossbars with a diameter of 8 mm. We screw into them self-tapping screws containing internal hexagonal recesses in the head. At the end of this process, we get an almost finished chair without a back and seat.
At the next stage of work, you need to make the back. To do this, we take several (2-3) pieces of plywood or planks with the following parameters: width - 30 mm, thickness - 10 mm. We glue them together and place them under a press until the glue dries. We secure the back to the long legs with small nails. This detail will give the entire structure additional rigidity. In a similar way (from glued boards of the same size or plywood) you should make a seat.

Children's furniture should not only be comfortable and light, but also completely safe for the child. Therefore, after assembling the chair, it must be processed, varnished or painted. When playing with his furniture, the baby will move it and turn it over. All surfaces, edges and joints must be thoroughly sanded using sandpaper or grinder, make sharp corners rounded.

Several layers of drying oil will create a protective coating for the wood and extend its service life. Afterwards you can start painting. Choose light or bright colors for the decor of children's furniture; paints that are wear-resistant will not peel off. A layer of colorless water-based varnish will help securely fix the paint.

High chair for baby

Such an original chair can be made using simple drawings, or even without them, from a lightweight (715 g) material - plywood. The chair has small sizes, namely:

product height – 360 mm,
height to seat – 180 mm,
seat – 190x240 mm,
back – 115x235 mm.

You can make a test model out of cardboard to see if a highchair of this size is suitable for your child. If this product is small, increase it by the required factor and feel free to get to work.

Materials and tools

Plywood 8 mm thick.
You can assemble the chair using spikes or simply screws, if desired.
Feather drills, jigsaw.
Sandpaper.
PVA glue.
Drill with screws for connecting parts.
Clear varnish.

Operating procedure

Based on the data or your measurements, draw a side part for the chair with a pencil on a piece of plywood.
Drill decorative holes using feather drills. Large ones - using a jigsaw.
To ensure that the second sidewall turns out exactly the same as the first, we place the finished part on plywood and outline it with a pencil. We cut it out the same way.

We mark the back, seat and parts that give the chair rigidity and prevent the sides from loosening.
When all the parts of the chair are ready, it is necessary to make them absolutely smooth, rounded, carefully sand the surfaces and especially the cut points.
We assemble the chair using glue and fasten the joints with screws.
At the final stage we are decorating the chair. Cover it with several coats of stain if you want it darker, or paint it a bright color and top it off with a coat of water-based varnish.

By showing a little imagination and preparing your own drawings, you can change appearance and finishing of the high chair, as well as making a table for a child of a similar design. Your child will appreciate it.