Our company offers turnkey septic tank. Each application is processed in the most short terms. At the same time, the process is carried out according to an individual plan in compliance with all the main aspects.
PIT PREPARATION
We offer two options for solving the problem: manual excavation or excavation using special equipment.
The first method is relevant if there is no way to drive up to the object. Then our workers will take over the digging of the pit.
The installation of a septic tank will take place more quickly if a mini excavator is involved in the process. The use of special equipment will slightly increase costs, but will significantly speed up the process.
BASIC REQUIREMENTS FOR INSTALLATION
There are several criteria that determine the installation technology of the Topas septic tank:
- availability of access roads to the object;
- seasonality and excessive soil moisture;
- the need to preserve the landscape in the surrounding area.
As practice shows, under favorable weather conditions, it will take about 5 hours to create a pit manually, a mini-excavator will need 10 times less time.
Installation "Topas" requires compliance with some mandatory rules:
- the distance from the walls of the pit to the tank should be from 15 to 20 cm. These are important parameters for arranging an autonomous sewage system, which should be taken into account when digging a pit;
- the body must be installed on a pre-constructed sand cushion;
- to protect the walls of the pit from shedding or deformation, it is necessary to build a formwork structure;
- the process is recommended to be carried out under favorable weather conditions: positive temperature environment and lack of precipitation.
SEPTIC INSTALLATION TECHNOLOGY
To create anti-deformation protection, in addition to installing a sand cushion, the entire body of the equipment is also covered with sand. In order for the internal and external pressure on the walls to be uniform, spilling is carried out in layers, and the compartments are filled with water. If the Customer cannot provide bulk materials and water, we will provide everything necessary after a preliminary agreement.
Finishing preparatory work the septic tank is carefully placed inside the pit. To install large stations, mini-excavators or manipulators are used. To avoid problems during operation, the station is leveled.
Regardless of the type of installation, our masters will independently engage in tapping and soldering the inlet pipe. To do this, we use high quality german equipment and exercise strict control. This avoids leaks and other defects, and ensures trouble-free use.
Since the sewer pipe may be at different depths, our specialists will select the soldering height on site. This approach will make it possible to place the septic tank at the most convenient distance from the building. For example, a pipe with a diameter of 110 cm at a depth of about 90 cm can be connected to the Topas 8 Pr cleaning station. Provided that the slope is 1 degree, the station can be installed at a distance of up to 10 m.
Installation of a septic tank price in our company corresponds to the high quality of work. In addition, we will help you choose autonomous sewerage in accordance with the characteristics of the site and operating conditions.
COMMISSIONING WORKS
Installation of a septic tank "Topas" completion of commissioning activities. At this stage, work is carried out to connect and configure electronic systems. If the device has a forced ejection function, the operation of the drain pump is checked, as well as the installation and adjustment of compressors.
In the process of commissioning activities, all systems are launched, the overall functionality is checked and the operating modes are adjusted. Our specialists will carry out all stages of installation of a septic tank "Topas" promptly and in compliance with all established rules.
We guarantee the noiseless operation of the treatment facilities installed by us and recommend that maintenance be carried out every six months.
Our company has the most experience installation work for installing Topas -
The Topas septic tank, which can be installed without much difficulty on your own, is a popular sewage treatment station. Such a system is produced by the domestic manufacturer Topol-Eco.
More recently, biological wastewater treatment seemed to us something fantastic and unrealizable. But modern man nothing will surprise you. A striking example of this is the innovative Topas septic tank, which, through microorganisms, performs effective and guaranteed high-quality wastewater treatment, as well as their processing into sludge.
The main advantage of this device lies in its absolute environmental safety. The principle of operation of the septic tank is such that the environment is not polluted during its operation. The device of the described cleaning device is thought out to the smallest detail. All its elements are arranged in a single body. Due to this, the installation of Topas can be done by hand. The design of the septic tank includes 4 compartments:
- Receiving chamber connected to sewer pipes. It accumulates sewage up to a certain level. As soon as the volume of wastewater exceeds it, a special float-type switch sends a command to the purifier compressor. It turns on, opens the next compartment, where sewage flows. Between the first two chambers, several filters are installed that stop the hair and produce a rough cleaning of the drains. Large particles settle to the bottom of the compartment.
- Aerotank. Into this chamber are wastewater, which are slightly filtered out when they arrive from the first compartment. It is in the aerotank that microorganisms live. They begin to eat sewage and destroy large particles of household waste. As a result, organic matter completely disappears from the water. An important condition for the active life of bacteria is the presence of oxygen in the second chamber. It is supplied there by a compressor unit. The incoming oxygen guarantees the movement of waste water and ensures that it mixes with the sludge. The latter acts as a filter. It binds foreign impurities and bodies, solid particles that penetrate Topas along with dirty water.
- Secondary sump. Further, the drains enter this chamber, inside which a special pyramid is installed. Water, along with sludge, is fed into it by means of an airlift. The principle of operation of the septic tank assumes that in the second sump, the wastewater is separated into sludge and water. At the same time, a special compartment device allows light fresh sludge to return to the receiving chamber. The old silt and all the components that are in it in a bound state remain at the bottom.
- Compartment for the purified liquid. Through the upper part of the pyramid of the second chamber, the water that has undergone aerobic treatment enters this compartment. It builds up to a predetermined level. And then it leaves the septic tank through a special hole.
Environmentally friendly septic tank "Topaz"
As you can see, the principle of operation and the device of the treatment plant are quite simple. Such an installation provides 95–97% wastewater treatment. As a result of the activity of aerobic bacteria, pure water, suitable for various technical needs and excellent fertilizer in the form of sludge for the garden. Agree, perfect for country houses and plots system.
Note that the described result can be obtained only if the installation of the Topas septic tank is carried out correctly and clearly according to the instructions. In addition, its device involves regular maintenance of the treatment plant.
The principle of operation of the septic tank assumes that microorganisms will constantly receive raw materials for their life. Therefore, Topas should be operated without long breaks. This means that its installation is optimal for dwellings where people are constantly (or regularly come there for the weekend).
The next nuance. Microorganisms are able to eat and decompose far from all the waste that residents of city apartments have a habit of pouring down the toilet. To ensure the normal functioning of bacteria, you must take care of them. proper nutrition. Make it simple. Do not pour the following substances into the Topas septic tank:
- rotting vegetable and fruit products, as it can cause the death of microorganisms;
- acid and chlorine compounds;
- technical liquids and oils;
- drugs and alkaline compounds.
Also, the principle of operation of the cleaning structure prohibits the discharge of various objects and elements into it, which by their nature are insoluble. These include plastic films and bags, household and technical waste, waste building materials. Such items can clog compressor units and purifier compartments and disable the entire structure. And bacteria do not feed on inorganic compounds.
The principle of operation of the cleaning structure
The Topas system is available in different variations. Various Models septic tanks are designed for a certain volume of wastewater in one day. It is strictly forbidden to exceed the recommended amount of drains! You need to choose the model that suits your case.
But from an operational and technical point of view, all septic tanks under the Topas brand are the same. We have already considered the principle of their operation, and now we highlight the unique characteristics of such units:
- no noise during operation;
- compact dimensions;
- high efficiency of effluent decomposition;
- absence unpleasant odors due to the complete tightness of the installation;
- automated operation of a septic tank;
- minimum electricity consumption.
Do-it-yourself cleaner maintenance involves the following steps:
- coarse filter cleaning (every 30 days);
- removal of sludge from the septic tank using a drainage pump (every three months);
- installation of new membranes in the compressor (every 2-3 years).
In addition, every 10 years, the treatment plant requires the replacement of aerators and thorough cleaning. Both of these operations are performed by hand, there is no need to call specialists.
Do-it-yourself installation of a treatment plant is carried out in several stages. First you need to properly prepare the place where Topas will be installed. According to SES standards, it should be located at a distance of 5 meters from a residential building (at least).
In the selected area, you will need to dig a pit. The geometric parameters of the pit depend on the size of the septic tank. The instructions for it clearly indicate what the height, width and depth of the pit should be. For example, for Topas-5, which is popular among household consumers, they dig a hole with dimensions of 180x180x240 cm. Then you need to do it, and equip a pillow from at the bottom of the pit. The height of the latter is about 15 cm. It is these extra centimeters above the soil surface that the cleaning structure will rise. This is done for a reason, but to facilitate the maintenance of Topas and to protect it from possible ingress of water into the system during the spring snowmelt.
Note! If in your area the groundwater lies very close to the surface, it is advisable to buy a PR model septic tank.
Installation of a septic tank model PR
It has a device (built-in type pump) for the removal of treated effluents according to a forced scheme. We continue the installation of the structure with our own hands. We thread the rope through the holes on the side of the septic tank and carefully lower it into the prepared hole. After that, you need to equip the supply sewer system to the cleaner. It is recommended to use low-pressure polyethylene (HDPE) pipes for these purposes.
In relation to the upper level of the soil, the pipe is cut into Topas at a depth of about 75 cm. Do not forget to set the required slope to the pipe:
- 3 cm per meter for products with a cross section of 5 cm;
- 1.5–2 cm for 10 cm pipes.
Next, we drill a hole in the body of the septic tank into which the pipe will be inserted. It is optimal to perform such an operation with an adjustable crown. The described cleaning stations are supplied with a cord made of polypropylene. It is necessary for soldering a pipe placed in the hole to it. The connection of these elements is carried out using a nozzle on building hair dryer. The sewer pipe is connected to the pipe only after it is securely fixed.
The installation of the station is, in fact, completed. Now it needs to be connected to a power source. A corrugated pipe is brought to it, into which a PVA wire 3x1.5 mm is placed. This electrical cable is connected to the terminals on the septic tank through a specially made factory input. And in the home, the cord is connected to the switchboard. It is desirable to connect the wire through a separate 16 A machine.
The final work on the installation of the cleaning station is the adjustment of the load on its external parts during sprinkling. The procedure is performed like this:
- pour water into the septic tank (about a third of its volume);
- at the same time backfilling the structure (also by a third);
- fill with water again and backfill.
The operation ends when the entire station is deepened into the ground to a given level. The septic tank is ready for use!
Free engineer visit
All calculations without hidden works
Professional turnkey installation in 1 day
High quality equipment and installation works
| WWTP model | Installation supervision* | Installation* depending on the type of soil | |
|---|---|---|---|
| Sand-Loam-Clay | Quicksand | ||
| TOPAS 4 TOPAS 4 PR |
7 875 | 14 000 | 25 500 |
| TOPAS 5 TOPAS 5 PR |
7 875 | 15 000 | 25 500 |
| TOPAS 5 Long TOPAS 5 Long PR |
7 875 | 18 000 | 29 000 |
| TOPAS 6 TOPAS 6 PR |
7 875 | 15 000 | 29 000 |
| TOPAS 6 Long TOPAS 6 Long PR |
7 875 | 18 000 | 29 000 |
| TOPAS 6 Long Us TOPAS 6 Long PR Us |
7 875 | 18 000 | 29 000 |
| TOPAS 8 TOPAS 8 PR |
9 750 | 17 000 | 27 500 |
| TOPAS 8 Long TOPAS 8 Long PR |
9 750 | 20 000 | 30 500 |
| TOPAS 8 Long Us TOPAS 8 Long PR Us |
9 750 | 22 000 | 30 500 |
| TOPAS 9 Long Us TOPAS 9 Long PR Us |
9 750 | 22 000 | 30 500 |
| TOPAS 10 TOPAS 10 PR |
11 810 | 18 000 | 30 000 |
| TOPAS 10 Long TOPAS 10 Long PR |
11 810 | 20 000 | 32 500 |
| TOPAS 10 Long Us TOPAS 10 Long Us PR |
11 810 | 22 000 | 32 500 |
| TOPAS 12 TOPAS 12 PR |
11 810 | 19 000 | 32 500 |
| TOPAS 12 Long TOPAS 12 Long PR |
11 810 | 21 000 | 32 500 |
| TOPAS 12 Long Us TOPAS 12 Long PR Us |
11 810 | 23 000 | 32 500 |
| TOPAS 15 TOPAS 15 Pr |
13 685 | 19 000 | 30 950 |
| TOPAS 15 Long TOPAS 15 Long PR |
13 685 | 21 000 | 32 600 |
| TOPAS 15 Long Us TOPAS 15 Long Us PR |
13 685 | 23 000 | 32 600 |
| TOPAS 20 TOPAS 20 PR |
15 750 | 21 200 | 32 700 |
| TOPAS 20 Long TOPAS 20 Long PR |
15 750 | 27 500 | 39 500 |
| TOPAS 30 TOPAS 30 PR |
17 625 | 46 500 | 54 400 |
| TOPAS 30 Long TOPAS 30 Long PR |
17 625 | 58 700 | 65 200 |
| TOPAS 40 TOPAS 40 PR |
23 625 | 53 000 | 59 800 |
| TOPAS 50 TOPAS 50 PR |
33 375 | 68 600 | 75 400 |
| TOPAS 75 TOPAS 75 PR |
35 250 | 107 000 | 113 200 |
| TOPAS 100 TOPAS 100 PR |
37 125 | 141 000 | 152 200 |
| TOPAS 150 TOPAS 150 PR |
45 000 | 194 000 | 212 000 |
*The price of TOPAS installation includes the following works and materials:
- Unloading the station from the car
- Digging a pit for Topas station
- Trench digging and laying 4 running meters sewer pipe DU 110
Soil excavation when digging a pit and a trench is carried out in a dump - 10 m of VVG 4 × 1.5 electric cable and laying it in a HDPE pipe or corrugated hose
- Descent of the station into the pit, sanding and simultaneous filling with water
Delivery of sand to the pit no further than 10 meters
*The price of Topas installation supervision includes the following works:
- Installation and connection of compressors to the station
- Installation and connection of the pump (for stations with forced ejection)
- Commissioning and launch of Topas station.
Attention! The cost of sand, water and formwork (if necessary) is not included in the installation price. The cost of preparing and laying a concrete slab at the bottom of the pit for AS Topas models: 30, 40, 50, 75, 100, 150 and their modifications is not included in the installation price.
Quicksand is a water-saturated soil (usually sand or sandy loam), which is capable of spreading and flowing when opened. When developing a pit, it is necessary to apply protective measures against soil collapse - formwork, caissons.
What is installation supervision?
Installation supervision is the commissioning of equipment, carried out by a field specialist of the Vega company.
What should the Customer prepare when ordering installation supervision?
- Prepare a pit according to the wiring diagram for your station model
- Lay a pipeline of sewer pipes from the house to the pit
- Run an electric cable from a separate machine in the house to the pit
- Lay pipes from the pit to the point of discharge of treated water
- Organize required amount people or special equipment for unloading the station from the car and descending into the pit (if the delivery is carried out by an onboard vehicle, and not by a manipulator)
- Prepare enough sand and water to fill and fill the station. Sprinkling and pouring of the station takes place under the control of a field specialist, by the Customer
- Prepare necessary material for supervised installation of the station (branches, couplings).
The price of installation supervision TOPAS includes the following works:
- Checking the dimensions of the excavation for the planned Topas station
- Checking the depth of the inlet sewer pipe to the station
- Sealed tie-in and soldering of the inlet sewer pipe into the receiving chamber of the Topas station
- Sealed tie-in and soldering of the outlet pipe, in the case of a forced station
- Connecting the station to the electrical cable
- Installation and connection of compressors to the station
- Installation and connection of the drain pump (for stations with forced ejection)
- Launch of Topas station, adjustment work
- Warranty for commissioning - 1 year.
The TOPAS septic tank is a unique offer for modern market, which allows to radically solve the problem of accumulation and treatment of wastewater at any type of objects, regardless of their location and remoteness from centralized sewer systems.
Autonomous sewage - a compact and fairly easy-to-use device that allows you to clean wastewater up to 98%. Drinking and using such water for cooking, of course, is impossible. However, recycled water becomes transparent, has no odor and is absolutely harmless to the environment. Moreover, by attaching a special storage capacity, it is possible to ensure the secondary use of water: for watering plants, washing fences, garden furniture etc.
Model Selection Rules
Before planning and carrying out the installation of a TOPAS septic tank, it is necessary to decide on the choice of a specific model. Our company - "Topol-Eco" for the most complete satisfaction of consumer needs, has developed and organized a highly efficient production various kinds septic tank.
The choice of a septic tank model suitable for the parameters must be carried out according to the following main criteria:
- The number of people permanently residing in the house (dacha, boarding house, etc.).
- The maximum volume of wastewater treatment.
- Limiting value of volley discharge of water (with simultaneous use of a bath, shower, sinks, etc.).
- Level ground water.
So, for example, for installation in a country house, sewage equipment designed for use by up to 5 people inclusive, installation of TOPAS 5 is suitable.
If the house is designed for 8 people, it is equipped, for example, with 2 shower cabins, a washing machine, dishwasher etc. - the best choice- installation of a TOPAS 8 septic tank. In just 2 hours, such a station is able to receive and process up to 440 liters. drains.
It is preferable to choose Topas 10 if the estimated value of wastewater treatment within 2 hours should reach 760 liters. As a rule, this is a house with 10 living people. It is possible to combine the system and the Topas septic tank, installation of the tenth series, when organizing an autonomous sewage system for 2 houses located nearby.
If you have a high level of groundwater in your area, then you need to choose devices marked "PR"
Topas professional installation is a guarantee of reliability and durability of the system
Installation of a septic tank Topas is relatively easy job. The main thing is that during the installation and commissioning of the system, all technological subtleties, design features, as well as requirements are taken into account:
- SanPin (2.1.5.980-00)
- SNiP (2.04.03-85)
- other regulatory documents.
When installing Topas, it is important to strictly observe the technological chain of sequential operations. Main steps:
- Decide on the place of installation.
- We are preparing a pit, the size of which should ensure the free installation of the septic tank body and the possibility of fixing it.
- We carry out the installation of a system of sewer pipes laid from the building to the septic tank.
- We supply power, cables to ensure reliable operation treatment plant.
- We install the septic tank in a regular place, we dock all structural elements. We check the tightness of the system.
- We fine-tune the operation of the septic tank, after which the object, ready for operation, is transferred to the customer.
The preparation of the pit begins with the selection of a site. This must be done in accordance with the requirements sanitary norms. As a rule, installation is planned in one of the most distant corners of the site from the buildings. There should not be a well, a pond, or other bodies of water nearby. It is necessary to tear off the pit taking into account overall dimensions cleaning station. For convenience of work during installation and connection, it is necessary to provide an extension of 20-40 cm on each side. A soft sand cushion is laid at the bottom of the pit, the layer thickness is 15-20 cm.
Works are carried out with the help of special winches or lifting equipment. Light models of the septic tank Topas (5 and 8) installation can also be done manually.
Further, the supply and fixing of sewer pipes is carried out. The standard diameter is 110 mm, as a rule, it should be used. Pipes are connected to the septic tank at a depth of 70-80 cm. If, due to difficult soil, high level water, the Long model is used - the depth of the tie-in will be at the level of 120 - 140 cm.
Trust installation only to professionals
The specialists of our company are ready to install the Topas septic tank quickly, efficiently and inexpensively. Each client will be guaranteed the perfect quality of the equipment, provided the possibility of long-term flawless operation.
You can apply for the provision of the corresponding service directly on the company's website, or by calling. Depending on the goals and objectives to be solved, financial capabilities and other conditions, the Topas septic tank can be installed in the following options:
- Standard installation.
- Installation chief.
- Installation of Topas "turnkey".
Maintenance features
The Topas septic tank is a reliable, highly efficient treatment plant. It is able to work for a long time and process wastewater with high quality. Its maintenance, contrary to expectations, is simple, consists in periodic inspection, periodic pumping of excess sludge, removal of particles that cannot be processed.
The best solution when organizing maintenance is to contact specialized service centers. StroyRemService LLC has created all the necessary conditions for work of any degree of complexity, high-quality and inexpensive maintenance of septic tanks.
Our advantages
The company has created ideal conditions that allow performing work of any complexity at the highest professional level:
- selected highly qualified personnel,
- all our specialists have extensive practical experience in the installation and connection of septic tanks of various sizes;
- all equipment, professional tools, special equipment,
- the technology of production of works is clearly developed, strict quality control is carried out.
We issue a quality certificate to each client - this is a guarantee of reliability and impeccability of the installation performed.
We never overestimate the strictly fixed cost of the service provided. On the contrary, if possible and appropriate, the installation of a septic tank will be organized in such a way as to make it the most profitable and affordable for the company's customers.
Contact the professionals!
Water drainage schemes
When arranging an autonomous sewer suburban area many owners solve the issue of biochemical wastewater treatment by building systems based on stations, which include Topas.
But how does this treatment plant work and how is the Topas septic tank installed? It is these questions that we will consider in detail in our article, focusing on step by step process septic installation.
We will also highlight the main advantages and disadvantages of this type of facility for the disposal of sewage and the features of its maintenance, supplementing the material of the article step by step photos and helpful video tips.
The Topas septic tank is a well-designed biochemical wastewater treatment system that functions due to the work of the main backbone -. The chemical side of the process is the oxidation of the waste mass with bubbly oxygen artificially injected into the system.
The biochemical impact on sewage effluents allows them to be cleaned as much as possible before being discharged into the underlying soil, sewers or filtration fields.
The organic component of the waste mass is destroyed by microorganisms, the household component is destroyed by oxygen. As a result, wastewater becomes almost transparent, devoid of the tendency to decay and bacterial contamination.
Image gallery
One of the main tasks of compressors is to activate the circulation of wastewater from one chamber to another and mix it with activated sludge. It acts as a natural filter that connects solid particles and foreign bodies that have entered the septic tank.
Advantages and disadvantages of the structure
The main advantage of the system is that each stage of cleaning takes place without pollution of the environment.
Among the indisputable advantages of the system, it is also worth highlighting:
- High cleaning efficiency.
- Economical power consumption.
- No noise during operation.
- Ease of maintenance.
Thanks to its compact dimensions, the treatment plant can be easily fitted even in a limited area.
A significant drawback of the structure is its energy dependence, which is associated with the operation of the compressor. The absence of an uninterrupted supply of electricity on the site makes the operation of the station biological treatment impossible. Therefore, it is recommended to supplement the standard equipment of the station with an autonomous generator in case of interruptions.
It is also recommended to reduce water consumption during a long power outage so as not to overfill the station with untreated sewage masses, which can spontaneously be disposed of and infect the soil with an increase in volume.
The septic tank is equipped with technical devices that can become unusable when the station is flooded surface water during the flood period. If similar phenomena are observed in the installation area, it is better to place the upper part of the station with a cover above the ground zero
A significant disadvantage of such finished structures is the high cost. But when recalculated for savings in servicing by vacuum trucks, it is immediately clear that the investment will pay off quickly.
And a nice bonus to that will be the absence of unpleasant odors and the ability to place the building close to the house, which is so important when arranging a small area.
The subtleties of a competent choice of a septic tank
The models of this cleaning station presented for sale differ in power. Thanks to a wide model range You can choose the design, the parameters of which will fully meet the needs of the customer.
For the arrangement of private houses, models with a numerical indicator of 5.8 and 10 are most often chosen. The Topas-5 model has a capacity of 1 cubic meter and is designed for a burst emission within 0.22 cubic meters.
The performance of Topas-8 is 1.5 cubic meters, it copes with a salvo release in the region of 0.44 cubic meters. The Topas-10 model successfully operates with a capacity of 2 cubic meters, and its salvo discharge volume is 0.76 cubic meters. meters.
Topas-5 is chosen for the arrangement of an autonomous sewer system small houses with no more than five residents. This does not take into account a large number of plumbing.
For large cottages, the number of households in which reaches 8 people, they choose a septic tank with increased productivity - the Topas-8 model.
If it is planned to connect several washing machines and install, in addition to the shower cabin, also a jacuzzi, they choose the model of the next modification Topas-10.
Each of the models has two modifications, differing in height:
- Standard- involves the introduction of a sewer pipe at a depth of 0.4-0.8 meters.
- Long- for deepening the sewer pipe up to 0.9-1.4 meters.
For areas where the geological section is represented by soils with low filtration properties, it is worth choosing models equipped with a pump. They provide for a forced system for the removal of treated effluents to a disposal site. Such modifications are marked "PR".
Topas septic installation technology
The process of installing a Topas septic tank with your own hands includes a number of main steps.
Image gallery
To avoid trouble, it is required, in addition to correct operation, regularly carry out maintenance activities of the treatment plant. So, once a month it is necessary to clean the coarse filter. Once a quarter, remove spent sludge from the stabilizer. Replace membrane annually.
A comprehensive preventive cleaning of the bottom and walls of the structure from sludge should be carried out every three to four years.
The accumulated stabilized sludge is pumped out of the fourth chamber with a drainage load, it is used as a starting material for making compost or for direct fertilization of garden beds.
Having correctly installed and launched the facility, as well as observing the above rules during its operation, you will be able to use the conveniences of a treatment plant that can serve uninterruptedly for decades.
Have you installed a Topas septic tank on your site yourself? Share your impressions of its operation, tell us if you are satisfied with this treatment plant? Leave your comments under our article, add a photo of your septic tank.
Or maybe you are just planning a purchase and have questions? Ask them in the comments block - our expert will definitely help you.