When buying or making a wardrobe, you need to think in advance about how and with what you are going to fill it. After all, he gained his popularity thanks to great choice various combinations and ready-made modules that allow you to adapt to the requirements of the owners. Properly selected filling for sliding wardrobes is a guarantee of functionality.
First of all, decide for what purposes you will use the cabinet, what you will store in it. The filling of the wardrobe for the hallway and for the bedroom will vary greatly; let's look at everything in order.
It is conditionally possible to divide the classic wardrobes into three parts:
- lower - for storing shoes;
- middle - the main part, where hangers, shelves are located;
- upper (mezzanine) - for storing things that are rarely used.
The wardrobe in the bedroom should have a lot of space for storing everyday, work clothes and bed linen. The depth, as a rule, is about 60 cm, which means that about 50 cm is available for storage. Thus, inside you can place both standard hanger rods and retractable ones with a release mechanism.
Popular options for filling wardrobes include the following details.
- Pantograph - a rod with a handle and a mechanism for descending to use the space above.
- Mesh baskets and shelves for linen made of metal or plastic - you can store anything in them, from shirts to socks.
- Hung the usual or end - for hangers.
- Clothes hangers with hooks - this is how you store things that do not wrinkle.
- Retractable trouser holders.
- Hangers for ties, belts and cufflinks.
- Multi-level pull-out baskets - for storing small items.
- Iron mount, which is fixed on the wall. In addition, you can make a built-in ironing board.
- Shelves and niches for storing shoes.
Filling built-in wardrobes: used modules Features of the closet in the hallway
The peculiarity of the furniture in the hallway is a small width. For compact hallways in Khrushchev, the optimal depth is 40 cm, unlike the standard 60 cm. Also note that 10 cm of depth is occupied sliding mechanism, so the standard coat hanger will not fit in such a narrow cabinet. Here, the use of a perpendicularly located hanger is suitable; it can be both retractable and stationary. Of course, you can’t hang a lot of hangers on it, but there is enough space for a small family. In a compartment 1 m long, you can place two pairs of such hangers parallel to each other, in total getting the length of one full-fledged one. 
To store shoes, wire shelves are used, which are fixed at an angle. Each such shelf will fit 2-3 pairs of shoes, so the main part will have to be stored in boxes on ordinary shelves.
In the hallway and corridor, small drawers are indispensable for storing small things: brushes, shoe polish, keys. Part of the space should be occupied by shelves for outerwear for other seasons that you are not currently wearing. To do this, make pull-out baskets or regular shelves from chipboard.
Also popular are models from several sections, which are complemented by hangers, corner shelves, hats, seats. Take care of the required number of hooks for bags, packages and umbrellas.
A good solution is to use a mirror for the cabinet doors. It will make the hallway visually wider, and you can look at yourself in full growth. In addition, you can install the backlight on the visor or inside the cabinet.
- The layout of the closet inside should match the number of sliding doors. If you are making two doors, then it is advisable to install two vertical sections. If the doors are wide, you can make an exception by adding a few compartments, but it is undesirable to put sliding doors longer than 1 meter.
- The length of the clothes rail should be sufficient, so it should be made larger than the compartment with shelves. The recommended length of the rod is 90 cm, and the shelves are 60 cm.
- The filling of the closet should be at a convenient height for normal access inside. If you are making shelves for clothes, the opening should be 35-40 cm, and for books - 20-35 cm.
- To store short clothes on hangers, the opening should be 80-100 cm, and for long coats - 150-160 cm. To calculate the opening for the bar more accurately, add 20 centimeters to the longest clothes.
- The upper space (mezzanine) is usually used for unnecessary large things, so make the top shelf 45-60 cm high.
- If you have a lot of clothes on hangers, it will be more convenient to increase the depth of the cabinet to 70 cm. Thus, minus the thickness of the doors, you will have the optimal 60 cm. But do not make the depth too large, otherwise it will be inconvenient to get things from the far edge of the shelves.
With an increase in the depth of the cabinet, access to things will be more difficult. The closet will be larger, but the clothes on ordinary shelves will have to be folded in several rows, and at the first attempt to get the right thing, everything will fall apart.
Pull-out mesh drawers provide more access to the second row of clothes and are great for storing smaller items.
- Underwear and socks are best stored in a drawer.
- Retractable fillers for wardrobes fasten so that the door frame does not interfere with their movement. handles on drawers must be sunk in.
Sliding wardrobes: internal filling When choosing drawers, pay attention to the quality and type of guide rails. They should allow the box to be completely rolled out so that it does not fall. Cheap roller guides allow you to extend them only halfway. The most progressive drawers have a closer mechanism that gently and quietly slides it into place.
- For long shelves and rods, provide partitions that will support them.
- To install lighting inside the cabinet, use a retractable visor, which will automatically turn on when the door is opened.
Corner wardrobes
Corner cabinet inside Separately, it is worth talking about the filling of corner wardrobes, an example of which you see in the photo. They have different shapes: triangle, trapezium, diagonal models.
If you decide to make a wardrobe corner, the filling will be more difficult, because you need to provide convenient access to the things in the corner. Good way competent use of corner space - installation in the center of several bars for hangers. An example of their fastening is shown in the photo.
Most often, the place in the corner is occupied by clothes hangers, but there are options with the location of the shelves.
In the corners you can make open shelves for souvenirs.
Features of filling built-in wardrobes
If you decide for yourself, the interior filling may be more practical. You make the most of free place from floor to ceiling, fill in empty niches. For example, many people prefer to organize a place for a TV or computer. To do this, they either create an additional open module, or put it inside, hiding it with doors.
Filling examples
With the help of a visual diagram, where the filling of the closet is visible, you can see examples of combining different components. Of course, they are all conditional, choose for yourself best ideas and create something of your own.
Options for two doors 
Option for three doors 
Option for 4-door cabinet The main advantage of the wardrobe over the usual wardrobe is to effectively use every centimeter of the allotted space from floor to ceiling. The capacity of the model is determined by the rational distribution of the internal space.
There are many layout options, but first you need to decide in which room the closet will be used. AT different rooms options for the location of the insides of the cabinets will be different.
The interior space of the closet should be divided into three parts: upper, lower and middle. Unnecessary items are usually stored on the top shelves of the cabinet. this moment seasonal items of clothing, shoes and other wardrobe items that are not very convenient to get. For coats and jackets stored upstairs on hangers, pantograph equipment will be handy.
The distribution of the middle part of the space is based on the fact that mainly the most necessary items of clothing today and now will be stored here, so this part of the closet is the most convenient. Usually the middle space is occupied by bars for hanging everyday clothes.
Shoes, clothing and home care items, such as an ironing board, iron, vacuum cleaner, can be stored in the lower part of the closet.
The location of the rods will depend on the depth of the wardrobe. If the cabinet is deep, then the bars will be parallel to the door. If the cabinet is shallow, then the bars will be perpendicular to the door.
The size of the closet for the hallway will depend on the size of the room. If the dimensions of the hallway allow, it is better to choose a roomy corner model. The internal content of such a non-standard closet must be planned for the storage of outerwear, shoes, bags and umbrellas.
photos
In the closet, you will need to consider the convenience of getting things out of the corner. The ideal option is when the corner space will be occupied by hanger bars. In order not to install a partition wall in the very corner, it will be enough for strength to install a support post with rods attached to it at the desired height.
The rest of the space in the middle part can be left for bags, umbrellas and hats, not forgetting to place shelves closer to the exit for shoe care products, keys and other little things. On the side walls it will be convenient to place hooks for bags. With a standard cabinet depth of 600 mm, the usable shelf space is 500 mm.
Filling a typical two-door wardrobe with dimensions of 1600 × 2400 × 600 mm for the hallway of a small apartment is the easiest and most economical option. In one half of the closet there will be several pull-out shelves and trouser racks for compact storage, in the other there will be a compartment for outerwear.
In the cramped space of the entrance hall of the “Khrushchev” apartment, it is necessary to provide that retractable internal shelves do not interfere with the correct closing of the cabinet doors. A compartment for accommodating rather long outerwear must be made at least 1500 mm high.
Cabinet dimensions in narrow hallway will be guided by the size of the niche or smallest wall. The depth of the cabinet shelves will not be standard and will be no more than 400 - 450 mm, respectively, the crossbar for outerwear will be perpendicular. Of course, a lot of clothes will not fit on the crossbar, but for a single person or a family without children, this space will be enough.
It is important that all drawers, rails and hooks are strong enough to support the weight of the items being stored.
Filling the internal space of the closet for the bedroom will be different from the wardrobe for the hallway. This closet is not designed for outdoor clothes and shoes. Optimal filling in such models of cabinets provides a large number of shelves for storing bedding, home clothes, socks and underwear.
For a bedroom, it is best to design a corner or built-in wardrobe that occupies the entire wall space.
The dimensions of the wardrobe 1800 × 2400 × 600 or more, up to two meters in length, involve the use of three doors. Such a cabinet is called a three-section. To organize the internal filling, it is convenient to divide the cabinet length of 2000 mm into sections of approximately 600 mm each, taking into account the thickness of the internal partitions. Even with a thickness of 14 mm, shelves of this width made of chipboard will not sag.
The filling of the cabinet 2.3 to 2.7 meters can be divided into three sections, moreover, there will be not three, but four doors. There will be four sections in a cabinet from 3 meters or more. There will be a lot of shelves in such large cabinets; drawers and multi-level mesh baskets can be added at the bottom to enhance the rigidity of the structure.
It is not always convenient to place drawers near the floor. In order not to bend over, the drawers can be raised to the level of the hip. With this arrangement, the lintels of the shelves under the drawers must be designed with increased strength. The dimensions of the mezzanine shelves do not always coincide with the dimensions of the sections, there may be one above two sections. It is important to calculate the thickness so that the shelf does not deform due to the load.
For a family with a baby, a practical arrangement of furniture in the bedroom will be very convenient, assuming the presence of a closet with a supply of diapers, next to the changing chest, in the drawers of which rattles and baby care products are laid out.
Since things that do not fit in other rooms are stored in the closet, the filling can be very different. For example, you can provide for the placement of a folding ironing board.
If you don’t want or can’t have other pieces of furniture in a small bedroom, you can provide in the space of a wardrobe hiding behind a sliding door dressing table. There are also options for accommodation sliding doors radio and television equipment.
If desired, you can combine several functional areas in one room by choosing a closet model with a built-in full-fledged workplace, that is, get a combination of clothing storage with a secretary.
Bringing to life a sketch of a closet in a children's bedroom, you should remember that internal accessories, handles and fittings must be durable and extremely safe. The internal filling of the children's wardrobe should be different from the adult. While the child is small, it is necessary that all his things and toys be concentrated on the shelves of the lower zone. An older child will eventually begin to use the upper shelves.
Rod for hanging clothes on hangers children's closet should be located at a height of no more than 80 cm, given the change in the growth of the child, it is good to provide for the possibility of adjusting the height of the bar.
In order to avoid clutter extra furniture, can be equipped in the children's bedroom wardrobe with built-in computer desk and shelves for storing textbooks and notebooks.
Choosing fillers and accessories
A sliding wardrobe is purchased for more than one year, so when choosing, you need to think carefully about the composition of its equipment. Today, the accessory system uses a huge range of high-quality stationary and pull-out fixtures for laying out and hanging wardrobe items that can be transformed to suit different needs.
Basic budget accessories include a hanger bar, mesh shoe racks, baskets on roller guides and conventional drawers.
photos
A metal bar for hanging clothes on hangers in wardrobes and wardrobes is made of round or oval section. The advantage of an oval section bar over a bar round section in that it is able to withstand a lot of weight and is often made removable.
Traditional mesh shoe racks can be installed horizontally and at an angle. They are placed in any opening, in the compartment they are attached to the back or side wall.
Multi-tiered mesh baskets with pull-out mechanisms are used for quick selection of wardrobe items. They are installed on budget roller mechanisms and vary in size, therefore, when designing a wardrobe, you need to leave a suitable opening for them.
The disadvantages of the design include their noise and not very high strength.
Today, more and more expensive, but also more durable telescopic guides on ball bearings are used more and more often for the operation of retractable systems.
Conventional drawers for wardrobes are made in the form of a chipboard box and a fiberboard bottom. The texture of the front panel of the drawer necessarily corresponds to the front of the cabinet. The box moves due to the roller guides installed on the sidewalls or on the bottom.
There is an easy way to upgrade a drawer cabinet using plastic baskets. If it turns out that there are not enough drawers in the closet, you can always install baskets of suitable sizes on the shelves.
Expensive accessories for wardrobes - pantographs, trousers, ties and retractable shoe racks are on sale in many varieties that allow you to organize convenient, orderly storage of things.
The pantograph is very convenient for getting clothes out of the hard-to-reach under-ceiling area of the closet. It is a spring mechanism with a handle that allows you to smoothly lower and return the bar with clothes to its original position. The bars are mounted on the side rails or on the back wall. Elite models of pantographs are equipped with hydraulic mechanisms that allow you to control the load capacity in steps and adjust the angle of the rod.
Wardrobes, if desired, are equipped with a swivel mirror and a folding ironing board with a device for ironing sleeves.
Nai the best choice it will be the right decision to equip the deep corner section of the wardrobe with a turn-and-pull system consisting of a fixed column, a supporting telescopic steel frame with hanging baskets-nets and holders for clothes, including trousers.
Trouser holders usually consist of 7-9 hangers for trousers. For hanging women's and men's trousers, there is also a retractable side fastening system of five tubular rails. Despite the compact arrangement, the trousers on this design do not wrinkle.
The cascading shoe rack system consists of 2-3 slanted mesh shelves with anti-slip mats. Depth shoe racks allows you to mount them in a closet in the corridor or hallway with a depth of 360 mm, 500 mm and store shoes of different sizes.
Ties, belts, belts, jewelry can be stored hung on special hangers or in shallow drawers with telescopic sliding mechanisms and cells planned with wooden dividers.
In the article I will describe in detail how to organize a closet. I will name the possible options for filling the structure. I will dwell on how to plan the layout of the shelves. I will share useful tips by planning.
Functional filling wardrobe
The filling of the closet compartment directly depends on its dimensions.
Consider the correct organization of the medium, small and large model.
Small
Small corner cupboard a compartment can be even 1.2 m wide. They are most often located in the corridor, the hallway of small apartments, and the living room. When the length of the structure is more than 1.2 m, it is supposed to use two doors. There is no special filler space, so shelves can be placed on one side, and a hanger bar on the other. You can fill the model with two crossbars on both sides, and place the shelves at the bottom in two units. One of them is on the mezzanine for storing things that are rarely used. You can embed the model. It is also appropriate to use a britcher and drawers for arranging small things.
Average
In the medium-sized filling, there is where to roam. Its width is within 2 m and suggests the presence of three segments. The design is often called a three-door design due to the number of doors. Their width is approximately 0.6 m.
If the width of the cabinet is more than 2.4 meters, it is better to make 4 doors. Especially if the model is tall.
The filling of the interior of the model will depend on the wishes of the owners. You can make 2 segments of 7 shelves according to the plan, and in the middle place a crossbar for outerwear and a place for shoes below. A good option for placing one segment of shelves in the amount of 7 units and two segments with crossbars. Moreover, one of them is for outerwear, and the other, which is shorter - for hangers with sweaters and jackets.
Pull-out functional drawers for underwear, socks and other small toiletries, including drawers for shoes or baskets with honeycomb elements for storing belts, ties and other things, will look good under it.
Big
Filling a large long wardrobe with a length of 3 m is not much different from a design of 2 m. It already assumes 4 segments and more doors. You can make a small dressing room. All multifunctional shelves, drawers and baskets are repeated, and their variations can be chosen solely on the wishes and tastes of the owner.
You can not make a lot of drawers for stuffing, but replace them with baskets or boxes. This will reduce the cost of construction and will allow, if desired, to change the arrangement of things without wasting time dismantling shelves and installing drawers. Today a lot modern ideas and interior designs. Finishing can be varied.
How to plan the layout of the shelves
- at the top of the mezzanine, the crossbar can be made somewhat narrower than all the others. Although sometimes boxes and baskets with things are placed there. Then their height can be adjusted to the desired content;
- at the bottom there is a place for shoes. They can be standard, not different for ordinary models in terms of clothing placement. And they may have special stands for shoes.
A large number of shelves can be provided, the main thing is that their width does not exceed 0.7 m. Otherwise, they may bend and the cabinet will become unusable.
The sliding wardrobe will allow you to place a large number of clothes and other things.
- it is best when the number of sectors of the model matches the number of doors. If door panels less, make sure that the retractable structures present can open normally. Sometimes the door can block the movement of boxes;
- rod compartments should be wider than the standard crossbar. If it is 0.5 - 0.6 m, then the place with the crossbar should take about 0.8 - 0.9 m;
- the best option for the width of the storage space for underwear is 0.35 -0.4 m. It is better if it is a drawer. It is possible even with sections inside;
- when designing a model, it is worth adding 10 cm to the door mechanism. Therefore, the depth of the structure should be 0.65 m. Otherwise, the hangers will not fit well;
- for shelves with a width of 0.8 - 0.9 m, a partition must be provided. The same applies to the holder of hangers with a width of more than 0.9 - 1.2 m. Here you need a vertical stand to stop;
- backlighting in the cavity of the cabinet is not recommended. All the same, it will only be able to illuminate the top shelf. For these purposes, a visor with built-in halogen bulbs is provided;
- in the extreme inner sectors it is better not to make empty openings with rods. From the constant movement of the doors and their impact on the surface of the side rails, the wall can simply fall off. It is best that the extreme sectors are filled with shelves from top to bottom. And already in the center were the rest of the filling elements.
Structural strength is the most important component of a spacious wardrobe And if you correctly plan the location of shelves, hangers, drawers and other structural elements, then the necessary household items will always be at hand. The main thing is to immediately think about what exactly you have the most and start from the competent placement of these particular things.
Blankets, pillowcases, blankets, bed linen, personal items - all these things are in the bedroom and require careful, accurate storage. It is important to remember that filling the wardrobe in the bedroom has its own differences, provided that this is not the only room in your apartment. It will not have shoe racks, bars for placing street clothes, but mezzanines, deep spacious shelves for linen baskets and bedding sets are welcome. An ironing board, an iron or a dressing table with hostess accessories can be placed inside the cabinet. For a family with a small child, a closet will appeal, whose design will not only decorate the room, but also allow you to neatly place a lot of children's things - from diapers, powders to rattles, diapers. It is believed that two types of wardrobe are best suited for the bedroom - built-in, occupying the entire space of the wall, or corner.
What kind internal structures and the arrangements should contain a sliding wardrobe in the bedroom? There are many options, it all depends on the wishes of the owner. The only thing you need to remember when purchasing the filling for the coupe is the quality of the materials. Brackets, fasteners, rods must be made of quality materials in order not only to withstand the weight of clothes and linen, but not to harm things. Drawer guides slide out smoothly, lock to prevent falling out, and close softly. The best solution is reasoning mechanisms that will close without any effort on your part. The design of the facade can be chosen according to your taste to fit into the interior of the bedroom. The rectangular type of cabinets inside is divided into sections, the number of which is equal to the doors.
with two doors
Rectangular cabinets with two doors. This configuration is considered the most popular among consumers. Having taken care of filling the wardrobe in the bedroom, you need to consider all options for organizing the internal space. The wardrobe can have sections for clothes with multi-level rods, a standard set of shelves, drawers. However, now manufacturers offer a lot of non-standard, very ergonomic “filling” options - these can be telescopic, rotary mechanisms for placing clothes or textiles. Convenient “carousels” were invented for hangers, which make it possible to facilitate the process of choosing clothes as much as possible. For small accessories inside the cabinets, special drawers with internal dividers are equipped. For tall cabinets without mezzanines great solution there will be pantograph crossbars that allow you to place things almost under the ceiling and, if necessary, easily lower the crossbar due to the elevator mechanism.
With a width of approximately 2 meters, with proper organization you get in the form of a cabinet excellent system storage.
A wardrobe with two doors inside will be divided into two sections. A frequent option is a large mezzanine compartment at the top. Sections are divided into right and left zones, they can have several solutions:
- on the right, a bar is placed for placing things, the lower zone is reserved for linen roll-out baskets. The left side is divided in half and deals with drawers and shelves for bedding. You can also give preference only to drawers or shelves;
- a compartment with rods can contain two "hung" under the coat hanger, if the presence of long products is not implied. Or several shelves are equipped under the bar;
- above the compartment with drawers, you can arrange fasteners for ties and belts, if you think that drawers with partitions are not very convenient. There are a lot of storage options for accessories. Narrow drawers are ideal for storing documents, jewelry.
Modern manufacturers offer a lot of solutions for an ergonomic device. The closet can be turned into the most fantastic system with lighting and automatic mechanisms for storage of things.
with three doors
Three-door wardrobes for the bedroom, respectively, will have three compartments. Their occupancy can be identical - for example, they can be the same shelves for storing baskets and large accessories. Or combine shelves, drawers. Also, one of the sections can be set aside for parallel-fixed hanger bars, and at the bottom of the shelf for boxes. Such a closet can also hide a chest of drawers with drawers for linen and personal items behind sliding doors, if the bedroom does not mean a dressing table. For more practical housewives, an ironing board and an iron stand can be fixed inside.
The length of the compartment is approximately 90 cm, so the cabinet with three doors is very large. When installing it, you need to remember that the part that got behind the front door of the bedroom will automatically turn into a “dead zone”, you need to try to get things that are rarely or from time to time into it.
If you buy a ready-made wardrobe, decide in advance how it will be placed in the bedroom so that, for example, rods with everyday clothes do not fall into a hard-to-reach corner. Ordering a wardrobe individual project, decide in advance which mechanisms need to be installed.
Angular
The spaciousness of the corner wardrobe in the bedroom will allow you to efficiently organize the storage of a large number of things. The space of the corner, which is usually not used, in this case will serve the owners of the apartment in good stead. Occupying the same area, a corner cabinet is 2 times more efficient than its rectangular counterpart. In the very corner, a so-called “dead zone” is formed, which can be bypassed by placing a central support with rods for placing hangers.
The corner configuration of the cabinet is made with a section in the form of a trapezoid, triangle or diagonal.
We offer three options for filling the corner wardrobe:
- the central part - a pair of rods on different levels height. The left side will be occupied by shelves, and on the right we will place drawers;
- the left side is divided into two compartments with spacious shelves. We make the inner compartment larger, we place the shelves at a greater distance. At the bottom we leave a compartment for overall things. We equip the right side with long shelves to the entire depth of the wall;
- the central part is reserved for clothes hangers. The side parts are equipped with shelves or sections with drawers. Also on the side walls can be placed side shelves with rounded end parts.
With a rational approach, a corner cabinet turns into an ergonomic and functional storage system.
Radius
Radius sliding wardrobe photo shows a very tempting and original design. Surely many will find it attractive for arranging space in the bedroom. The shape of the doors is curvilinear, due to which the internal content also has its own characteristics. A radius cabinet is most often designed in a corner; it also has a “dead zone” characteristic of such a configuration. The corner, as the previous version, is formed with clothes bars on a vertical rack, or a rotating structure is placed, which additionally supports the cabinet body.
In addition to shelves for bed linen, accessories, such a wardrobe can be equipped with internal cabinets with drawers or tiers of mesh baskets for knitwear and small accessories. If a radius closet in the bedroom involves storing everyday clothes, then the pantograph microlift will be a great addition that will allow you to make the most of the space.
Inside the radius wardrobe of the bedroom, a hostess dressing table, an ironing board with an iron, even a vacuum cleaner can be easily placed. The space of the corner in this case is used with maximum efficiency, providing the ergonomics of the space.
built-in
The built-in sliding wardrobe is mounted in a niche of a bedroom, a corner or along one of walls. The design feature is that only the facade with sliding doors is mounted. It can be a large section that turns into a dressing room part of a room or a pantry, or a small wardrobe one meter wide, with two tiers of transverse bars.
A feature of the built-in wardrobes are false panels, fixed on the walls and ceiling, not only for aesthetic reasons, but also to make it more convenient to mount shelves, rods and other retractable equipment. Vertical rods installed in angular or radial models act as an additional support for the internal structure. The same function can be performed by a vertical partition if the length of the shelves is large and requires measures to prevent deformation under the weight of things.
When planning the filling of the built-in wardrobe, you should take into account the features of the compartment design of the door mechanism guides:
- top when the doors are "hung". This type is not suitable for drywall constructions;
- lower - in this case, the weight of the structure goes to the floor and requires some elevation.
The design of such a cabinet can include both a blank facade and a solution with translucent inserts, a mirror, and even turning on a TV. The number of doors depends on the width of the structure.
Mandatory elements
When arranging the filling of the closet in the bedroom, choose required elements, based on the functionality and what things will be stored.
If it is planned to place only bedding, home clothes and linen inside, then large and roomy shelves will become an indispensable attribute. There should also be linen sections with baskets and boxes for personal items.
On the other hand, in small apartments, the bedroom sometimes turns into a living room during the day and seasonal outerwear, everyday items and accessories are also removed from the closet. In this case, the filling of the cabinet must necessarily include sections with rods:
- high - for long wardrobe items;
- at the middle level - for shirts, trousers, skirts.
If the height of the closet allows, then the pantograph rod will be the best choice, allowing you to put things that you use only periodically into the upper tier. A shoe rack is not the best option for a closet in the bedroom; shoes and boots should not be stored with linen. But hangers for ties, belts, scarves and other accessories will be quite appropriate.
The closet in the bedroom should have a compartment for underwear, accessories for personal use.
It will be great if baskets are placed on the shelves, allowing you to sort bed linen and personal items. Such a distribution will allow you to maintain order if one of the household members is looking for the right thing.
| Sliding wardrobe type | Peculiarities | Mandatory elements |
| 2 doors | The most common type. The number of sections matches the number of doors in the cabinet. | Large deep shelves for bedding and linen. Small compartments for household textiles. Boxes for linen and accessories. A small but high bar for placing bathrobes if other things are in the dressing room. Baskets or boxes for storing knitwear and hosiery. |
| 3 doors | The number of sections matches the number of doors in the cabinet. May have dead space due to size front door bedrooms. | Cupboard large sizes, is chosen to accommodate not only linen, but also household appliances. Be sure to have a niche in the lower tier to accommodate household appliances. Mezzanines can be combined with a pantograph to store seasonal items and large bedding, blankets and blankets. |
| Angular | Angle is a dead zone. | A device in the corner of the rods on a vertical stand or a rotating structure for placing clothes hangers. |
| Radius | Angle is a dead zone. The facade can be convex, concave or undulating. |
The device of the racks is similar to the corner model, taking into account the features of the facade. The structure installed in the corner or the rods must not interfere with the movement of the doors. |
| built-in | False panels for mounting shelves and rods. Upper or lower fastening of the "compartment" mechanism and guides for doors. Uses space from ceiling to floor. |
Mezzanines and wardrobe lift "pantograph" for the organization of the upper tier. Vertical posts and panels to reinforce the structure of the internal filling. |
Space zoning
Inside the wardrobe for the bedroom, no matter what design is used for the exterior of the facade, the rules of space zoning will be followed, guaranteeing ease of use and ergonomic qualities.
The number of sections inside the cabinet is the same as door leaves. Since fullness is provided mainly by bedding and personal items, a bedroom compartment will contain a large number of deep large shelves, as well as sections for linen, towels and personal items.
Zoning is based on three levels:
- the upper level - it can be both shelves and mezzanines - will be occupied by things that are used seasonally or periodically. Warm blankets, blankets, guest bedding sets can be placed here;
- middle level - occupy things that should be constantly in front of your eyes. These are bedding and accessories used regularly;
- lower level - often occupied by baskets and boxes in which small items, clothes, linen are stored, as well as Appliances. This is where suitcases are placed.
A built-in dressing table with a hair dryer or an ironing board, retractable into one of the niches, can act as a filling in the bedroom closet. Special attention when organizing space should be given to dead zones. There are two ways out: placing things that are rarely used or optimizing the internal space due to rotating racks or sections that will facilitate access to the contents of the compartment.
For a large bedroom spacious closet- this is a real find, because most often it is in this room that things are located that strangers should not see. Competent organization internal filling will allow you to use the available space as efficiently as possible and perhaps even free up extra square meters in the room.
Video
A photo
Sliding wardrobes - universal modern systems storage, which can become not only a central element of the interior, but also a functional addition to the overall design. In addition to aesthetic appeal, an important role is played by the organization of the internal space, which requires a special approach, because competent planning compartments is the key to compact placement of a large number of things and household items. In our article, we will consider the main points that you should pay attention to when choosing a "stuffing" for a wardrobe, as well as design features for individual rooms.
wardrobe planning
Planning the interior space of a wardrobe must begin with determining its dimensions, location and functional load. First of all, you need to decide where the storage system will be located. If it is assumed that the wardrobe should contain the things of all family members, it is better to install it in the hallway or living room, everyone will have free access to the furniture.
It is important to correctly calculate the dimensions of the future design, which depend both on the size of the room and on the needs of a particular family. The most popular models have a depth of 55 to 65 cm, and the height is designed from floor to ceiling. At the same time, in hard-to-reach upper sections, as a rule, things are stored that are not needed in everyday life or are dressed according to the season (winter hats, sports equipment, etc.).
The length of the future product is determined by how many things will be stored here. For a large family or an avid shopaholic, you can organize a storage system located along long wall rooms. Such dimensions will help to ensure the careful preservation of the entire wardrobe. In a children's room or bedroom, you should limit yourself to a small design, which will be enough for one or two people.
For a successful layout of the internal space, you need to decide on the purpose of the structure, consider the need for each section, because a closet can be a storage not only for clothes, but also for books, household appliances. Sometimes a special compartment for an ironing board or even a mini-office is equipped here.
Which form to choose
Depending on the characteristics of the room, its size, shape, presence of niches, you can choose the most good option closet that will not clutter up the space. A popular option is built-in structures, which are located in wall recesses, dead ends or corners of rooms, as well as along one of the walls. The peculiarity lies in the fact that the top, rear and side panels are absent here - their role is successfully performed by the ceiling and walls, and only the facade and internal compartments are mounted. Built-in wardrobes allow you to use the empty spaces of the rooms with maximum benefit, becoming quite a capacious storage. Shelves here can be placed both along the wall and in an L-shaped or U-shaped layout, depending on the depth of the niche.
Corner structures are not inferior in capacity to built-in wardrobes, and sometimes even surpass them, allowing you to place large objects in their central part. Radius structures that can be turned into real ones are especially convenient. wardrobe rooms with mirror and dressing table. Often the "blind" zone of the corner is occupied by a central support with rods for placing trempels, and the side compartments are reserved for shelves and drawers.
Linear, free-standing wardrobes are less spacious, but they are not difficult to move if necessary. They can have a different number of sections and, accordingly, doors.
Filling the closet: mandatory areas
For a successful layout of the internal space, you need to decide on the purpose of the structure, consider the need for each section. Sometimes a special compartment for an ironing board or even a mini-office is equipped here. Consider the main areas that are necessary for the neat arrangement of things. These include:
- Shelves for wrinkle-resistant things, where you can store sweaters, golfs, T-shirts that do not lose their shape when folded. Their width can be different: for adult clothes - 50-60 cm, for children's - 30-40 cm;
- Drawers for linen - storage systems are separately provided for women's underwear, tights, socks and separately for men's underwear, ties. It is enough for such small gizmos that the depth of the section is about 15 cm;
- Rods and pantographs for clothes on hangers (trempel) - devices that help to place things in several tiers. It is important to correctly calculate the height of their placement: it is necessary to measure the length of the clothes and add about 20 cm of stock to it, taking into account the installation of the crossbar and the height of the coat hanger with a hook. The most convenient option is to organize separate rods for short and long things. For example, you can place two sections with jackets, shirts, sweaters one under the other, and organize a section with long clothes (coats, evening dresses, etc.) separately. At the same time, you should take care of the presence of a special long hook, with which it is convenient to remove the hangers from the upper tier;
- Drawers for accessories - quite a significant cell of the closet, which will allow you to orderly store medium-sized wardrobe items, such as watches, glasses, ladies' jewelry. The separation will require a small height (10-12 cm), it is better that the boxes are divided into separate cells;
- Compartment for shoes - in a large closet you can equip two compartments. The first will be located in the lower part, where casual shoes will be located on shelves or special mounts. Shelves can be stationary or retractable, solid or mesh - the choice depends only on the personal preferences of the owners. The second compartment is set up in the uppermost part - you can put boxes with shoes waiting for seasonal wear there;
- Storage of suitcases and travel bags - more often settled under the ceiling, and the dimensions of the shelves are selected according to the dimensions of the luggage.
Additionally, there may be other departments, for example, trousers, shelves for bags, hats or bed linen. It is worth noting that the more shelves and drawers there are in the closet, the more spacious it will be. Sometimes the boxes are replaced with baskets where they store winter accessories, cleaning products for clothes and shoes. Drawers are placed at a height not exceeding 120 cm from the floor level, so that they are convenient to use.
Ideas for filling the closet for different rooms
Each room in the apartment has its own functional load, so the filling of cabinets may differ in one way or another. Next, we will consider some of the nuances that should be taken into account when planning the interior fittings of a closet in a particular room.
Hallway
The sliding wardrobe in the hallway will become best solution organization of a storage system that will allow you to place a lot of clothes, and sliding doors will provide free passage. If there is a niche in the wall, you can create a real dressing room in it. Also a profitable option are corner structures and cabinets located in dead ends of long corridors.
Thinking through the "stuffing", you must first take care of the modules for storing outerwear and shoes. At an accessible height, a bar with hangers is installed. It can be one longitudinal pipe or several transverse rods that can be extended. good option for greater spaciousness of the upper wardrobe, a pantograph will be installed that allows you to raise and lower a row of clothes.
Allocated for shoes Bottom part structures, and it is desirable that these be mesh shelves or boxes that do not delay the accumulation of street dirt. The upper sections are intended for hats, travel bags, rarely used things. If there is a lot of space, for example, when the closet has an angular design, space is allocated here for equipment that is difficult to find a place in the apartment (vacuum cleaner, power tools, etc.). It is also worth taking care of the presence of drawers and shelves, where smaller things will be stored in an orderly manner: gloves, scarves, umbrellas.
Living room
In the living room wardrobes can be used for different purposes: to store clothes, books, appliances. For the most part, they are a decorative component of the interior, decorating it with their facades. A frequently used option is wardrobes complete with slides for the living room, when a wardrobe is hidden in the depths of the wardrobe, and additional modules occupy objects modern technology and accessories.
An interesting option is to install a TV panel directly in the inside of the cabinet, where a separate massive shelf is provided. Depending on the size of the guest room, the cabinet may have different dimensions and, accordingly, a different number of doors. Designs that fill the entire wall look beautiful, in addition, they are the most spacious and allow for storage. maximum number wardrobe and other accessories (sports equipment, vacuum cleaner, children's sled, ironing board, books, etc.).
Bedroom
A spacious wardrobe for the bedroom is a real find, as this room often contains accessories that are not desirable to be put on public display. Proper planning of the internal space will help to find each thing its place and free up the living space as much as possible by ridding the interior of randomly arranged things on chairs, beds or at the dressing table.
The wardrobe in the bedroom, in addition to the basic clothes, should have compartments for bed linen, terry dressing gowns and towels, under which the upper large shelves are allocated. For outerwear, as a rule, the highest wardrobe modules are assigned. Underwear should be stored in separate (for men and women) drawers with cells. casual clothes best positioned at eye level. Just like in the living room, the wardrobe in the bedroom can have a compartment where the TV will be located, if there is no other way to install it. Here, an ironing board with an iron stand will be in place.
Children's room
Own closet in the child's room can not only ensure the accurate maintenance of the children's wardrobe, but also help the child acquire the necessary skills to create order in his still small world. To leave the space of the room as free as possible, you can install a corner structure or organize a built-in storage system.
It is important to think over the filling of the wardrobe for the child in such a way that it is most convenient for him to deal with his wardrobe. It is better to place the hanger bars at a height with some margin, given the fact that the kids grow quite quickly and, of course, the length new clothes will increase.
Wardrobe items that a child needs in everyday life should be placed at the level of his height, and off-season items and sports equipment can be placed on the upper shelves. Drawers, wicker baskets, where you can put small accessories, will help to keep order. If the closet is large enough, you can separate the section for toys or art supplies.
Filling the wardrobe - photo
In the further gallery, we suggest that you familiarize yourself with the various ways of filling the wardrobe, which presents options for the correct arrangement of modules. We hope that the photos we have selected will help to make your headset roomy and comfortable. Happy viewing!
