More and more housewives are interested in the question: " How to remove tape marks?", since now it is used both in everyday life and in other areas of the economy. When moving, we are used to packing boxes with this particular adhesive tape; during renovations, we cover furniture with film and again seal it with tape, and what can we say about insulating windows in winter. But when The long-awaited spring is coming, we are trying to wipe off these terrible black spots on the glass, which are covered with a thick layer of dust and greasy soot.
For many people, these terrible black marks have already become a kind of “interior item”, since it is impossible to wipe them off with a washcloth and soap.
“How then to get rid of them?” you ask. In fact, dear housewives, I want to tell you that difficulties in removing sticky marks from tape arise from ignorance of some tricks. Therefore, you can consider that you have practically said goodbye to this problem. In this article, we will tell you all the secrets of removing those unfortunate sticky black marks using available means.
Scotch tape marks on plastic and glass: we remove them with improvised means
If traces of adhesive tape appear on plastic or glass in your home, there is no need to grieve, since this problem can be effectively eliminated using improvised means that every housewife has in her home.
Well, dear ladies, we suggest we begin our short excursion. The methods that we will tell you about below are great for removing traces of tape from plastic and glass.
1. Any vegetable or essential oil.
Any oil will work well for removing sticky residue, from scented essential oils to regular sunflower oil. To achieve maximum effect, you should:
- apply a small amount of the oil of your choice to cotton wool and thoroughly treat the contaminated area;
- leave the oil for 15 minutes so that the adhesive from the tape is thoroughly saturated with it and swells;
- when the oil breaks down the sticky residue, take a dry, clean rag and start wiping off the dirty stains;
- if after the first procedure it was not possible to completely get rid of the stains, then these manipulations can be repeated;
- At the end of the work, wipe the plastic or glass with a dry paper towel.
Another tip: be prepared for the smell of oil to “linger” in the room for a long time, so we recommend using essential oils to remove the tape. You will remove traces and enjoy pleasant citrus aromas.
2. Medical alcohol.
Alcohol will do a great job of removing tape residues and will remove the yellowish tint from the plastic. First you need to do a little testing on an inconspicuous area, since the plastic may have different composition and density, so the reaction may also be different. To remove sticky marks, you need to moisten a small piece of cloth with alcohol and gradually wipe off the contaminated areas on glass or plastic. This procedure should be carried out until the sticky residues completely disappear.
3. Scotch.
It’s not for nothing that people say: “They knock out a wedge with a wedge!” The tape itself will cope perfectly with the problem of sticky residue on plastic or glass. Carefully place a new strip of tape over the old marks, then quickly tear it off. You may need to repeat this procedure several times, but believe me, you will be pleased with the result.
It’s best to start with this advice, but if it doesn’t help you, then move on to the method with vegetable oil and ethyl alcohol.
4. Cleaning products.
Now on the shelves of hardware stores there are many products that are designed for cleaning glass. You can use a spray if the contamination is minor. If the traces of tape on the glass are very noticeable and already black, then you cannot do without special cleaning pastes that have abrasive properties.
To effectively deal with this problem, you need to:
- before starting work, be sure to wear rubber gloves, since these are chemicals that can cause an allergic reaction;
- apply a little abrasive paste to the sponge and begin to wipe off the remaining tape from the glass;
- periodically rinse the sponge to remove paste and sticky components that have already been removed;
- At the end of the work, thoroughly rinse the glass surface and wipe dry.
The use of cleaning pastes is not suitable for removing traces of tape from plastic, since abrasive particles can easily damage it and leave small scratches.
5. Stationery eraser.
You won't believe it, but a regular eraser can work a miracle and remove even the oldest tape marks! Sticky spots are removed like failed drawings in a sketchbook, and dirty marks, or rather, sticky pellets that will remain after treating the contaminated area with an eraser, can simply be wiped off with your hand.
The method of removing tape with an eraser is ideal for plastic windows, glass, furniture, and even various electronics. But if the “affected area” is large enough, be patient and strong.
6. Hairdryer
The adhesive from the tape eats into the plastic surface almost tightly. Therefore, traces of it must be removed immediately after they are discovered. Otherwise, under the influence of direct sun rays the glue from the tape and the plastic can simply become akin.
You can try using a hairdryer on the areas where there are remaining tape residues. Under the influence of hot air, the glue will soften a little, and it can be easily removed with a dry cloth or rubber spatula.
Without a hairdryer it is simply impossible to remove residues double sided tape, because it contains rubber and other foams that adhere firmly to any surface.
But it must be used very carefully, because not any plastic will withstand high temperatures and does not deform.
7. Baking soda.
Regular soda can solve our common problem. To do this, prepare a slurry that will have the consistency of very thick sour cream. Carefully apply the resulting paste to the sponge and begin to remove traces of tape. Before using baking soda, you can slightly warm up the sticky spot with a hot blast from a hairdryer. Finally, thoroughly rinse the plastic or glass surface.
8. Nail polish remover or acetone.
Each of you probably has a similar product in your purse. Believe it or not, it does a great job of removing tape marks on glass. It is not recommended to use such a solvent on plastic, since the surface may become covered with cloudy spots.
9. A universal remedy.
Now on sale there are universal “Label Remover” products that are designed to get rid of traces of adhesive tape. Proceed according to the suggested instructions, and you will forever get rid of dirty traces of adhesive tape on plastic or glass.
10. Wiper.
The special glass cleaner that your husband uses in the car can also help you remove traces of tape from a plastic window:
- spray the product onto contaminated areas;
- leave for a while, periodically spraying the stains as the product will drain;
- Now wipe the glass with dry paper.
Ready! There was not a single trace left of the tape!
11. Special pencils.
It happens that there are a lot of tape marks on the refrigerator. This happens when your child immediately puts on him new stickers that he came across in yogurt or corn sticks. You have to mask such traces with magnets, and then your refrigerator turns into a “honor board” of who, where and when you vacationed.
You can apply the above methods, or you can purchase it in a store household appliances special pencils that will help remove traces of tape on the refrigerator or washing machine, as well as clean them. Such products are suitable for glass, plastic, tiles and ceramics.
12. Special product for removing tape and stickers.
Have you just found traces of adhesive tape on your linoleum, and nothing we suggested helped you? Don’t be sad, dear housewives, because this problem can be solved. Go to the hardware store yourself or ask your husband and buy a special sticker remover "Profoam 2000". It copes well with the problem of glue marks on plastic, linoleum, leatherette, and glass.
While in such stores, ask the consultants about new products that you may need in your everyday life.
13. Drill.
How can you remove tape marks using a drill? Can! We will tell you about this method only when you call your husband for help.
A drill with a rubber tip acts like an eraser, only much faster. This method will quickly remove traces of tape from any paintwork or plastic coating. You should take on this work only when you are confident in your abilities, because lack of experience can easily damage the surface.
You see! Still, it is possible to get rid of dirty sticky traces of adhesive tape. It is important to understand which method can be used on a particular coating. Now you too will get rid of unsightly “interior detail” on your window or refrigerator, like dirty traces of adhesive tape.
Removing sticky tape marks from furniture
For days now you have been racking your brains over how to remove sticky traces of tape on furniture without damaging it. Now stop thinking about it because we have a few for you. effective ways that will help to effectively solve this problem.
|
How to remove traces of tape? |
How to use? |
|
Solvent |
From any lacquered furniture A regular solvent will help effectively get rid of traces of adhesive tape. We would like to warn you in advance that you should not overuse it, as it can leave stains and clouding on the varnish of your furniture. Be sure to check for a reaction in an inconspicuous area. Let's get started:
Make sure the room is well ventilated in advance. Since any solvent has a very pungent odor. |
|
Hairdryer + vegetable oil |
Before removing tape marks from your furniture, heat the stained area with a hairdryer. After this:
|
|
Essential oil |
Essential oil, which can be found in any pharmacy, will effectively destroy traces of glue. It contains organic acids, which are special effort will destroy the adhesive properties of the tape. It is enough to treat the sticky area with a napkin with essential oil, then wipe with a dry cloth. |
|
Detergent + hot water |
Add any detergent to very hot water and lather well.
|
|
Acetone |
If traces of tape are present on upholstered furniture, they can be removed with acetone. Simply moisten a small piece of cloth with it and rub thoroughly. soft upholstery. Then wash off the residue with soapy water and dry with a towel. |
And you were worried. Everything turned out to be much simpler. You can even remove tape marks from the upholstery of upholstered furniture. Nothing is impossible, believe me, dear ladies! Now you will never be scared by a new sticky spot, because from today you know all the tricks with which you can remove any traces of tape on furniture!
How to remove dirty traces of tape from clothes?
There are cases when dirty traces of tape appear on clothes, so many housewives are interested in how to remove them.
You can remove such stains using a solvent, acetone or alcohol. To do this, generously moisten a cotton pad with any of the products and place it on the stain. Leave for 15 - 20 minutes, then gently rub off the dirt.
If the stain does not disappear after the first attempt, you can repeat the procedure again. After several such manipulations it will definitely disappear. Be sure to wash your clothes afterwards to get rid of unpleasant odor solvent.
Vegetable oil will not work for removing traces of tape from clothes. This will only worsen the situation, and in addition to the dirty stain, a greasy stain will appear.
Before you start removing stains, carefully study the labels on your clothes: your favorite T-shirt may not be exposed to solvent or acetone.
If the use of the suggested remedies does not “move” the sticky stain, try disposing of it with tape. Stick the strip on the sticky spot and quickly remove it - the new tape should “take” the old residue with it.
This is where I would like to end today’s article. We hope that these recommendations will make your life much easier, and you will be able to deal with traces of adhesive tape both in the house and on clothes without much effort.
Many of us have had to deal with terrible sticky stains left on plastic or other surfaces from tape, masking tape, price tags and stickers. They instantly attract dust and become black with dirt. And getting rid of them is not so easy if these traces are old.
It turns out that there are a lot of ways to do this without much effort. I’ll tell you how to remove traces of tape using all means known to me. Not all are equally effective or can be applied to all materials, so be careful when choosing.
Removing stuck tape
Traces of glue from adhesive tape are not the worst thing. You can try to tear off the tape itself if it was pasted a long time ago and took a long time to dry, especially in the sun. This often happens if you don’t remove it right away. protective film from window frames.
In this case, a hot compress or hair dryer will help. But first, try gluing a strip of new tape over the old tape, and immediately rip it off its place. This often helps remove the tape, or at least part of it.
If this method doesn't work, try softening the dried glue with heat using:
- Soaked in hot water and a wrung out cloth that is applied to the surface to be cleaned;
- Household steam generator.
But use hot air or steam carefully and only if you are sure that you will not harm the plastic surface, which may become deformed from such impact.
Sometimes it is enough to peel off just a corner or edge so that you have something to grab onto and tear off the tape. If that fails, you can use a scraper. But not hard or sharp, so as not to damage the material.
Removing traces of glue
Even if the tape itself was completely removed, the remaining glue on the surface can still cause a lot of trouble.
Fresh marks can be easily removed with warm soapy water, but for old and dried marks you can use a variety of products, some of which are found in every home.
Home Remedies
First, let's go to the kitchen. There are at least three excellent cleaners here:
- The most effective is vegetable oil. Oddly enough, it copes well with such contaminants, since, when mixed with glue, it changes its composition. Using a cloth soaked in oil, you need to wipe the sticky area, wait a little, and then wash off with warm soapy water.
- Soda. Before you wipe the glue off the tape, mix it with water to make a liquid paste. Apply to dirty areas and leave until dry. Then wipe off with a damp cloth.
- Dish detergents. I wouldn't say that they are very effective, but if nothing else is at hand and the stains are fresh enough, they will do the job.
- There will probably be medical alcohol in your first aid kit. Best of all is 95% ethyl. You can use a lower concentration, but it will last longer. In a pinch, vodka will do.
- A window cleaner containing alcohol can also help remove traces of tape from plastic or glass. She's probably on the farm too.
- If not, look in your cosmetic bag or dressing table drawer in search of nail polish remover. It doesn’t matter whether it contains acetone or not, it should help in any case.
I think it’s not worth repeating every time that any liquid agent the contaminated surface is first wetted, possibly several times, given time to interact with the glue, and only then washed off.
Let's imagine that none of the above was found at home. Then we open my husband’s locker and look in it for any solvent, gasoline for lighters or “Vedashka” - WD-40 aerosol, with which he erases traces of tar from the car or unscrews rusty nuts.
Solvents and gasoline also help remove stickers from clothing or upholstery. Don't be afraid of the harsh stuff - it evaporates quickly.
But use them to remove traces of tape from painted or varnished surface, not worth it. They may dissolve the coating or change its color. You also need to be careful with plastic - it comes in different forms. First, it is better to try applying the product to a small, inconspicuous area and see the reaction.
The only thing that glue can be wiped off without fear of damage is glass. It is inert to all of the listed liquids.
Finally, you can go to the nursery and expropriate the child’s regular office eraser. They act in the same way as when removing pencil drawings from paper.
Dirty traces of adhesive tape can be removed from the surface quite easily, but only if their area is small. No, of course, they can be removed from all plastic windows in the house, but this will require a lot of time and effort.
Special means
If you couldn’t wash the tape with your own hands using improvised means, you can always use liquids and aerosols specially created for this.
Interestingly, they are often available from sellers who sell household appliances and other large goods. Therefore, remove the sticker from the refrigerator or washing machine You can ask directly in the sales area.
It is advisable to have such a tool at home, you never know when it might come in handy. But the instructions must be read carefully to know on what surface it can be used.
You can also find professional compositions for large volumes of work on sale. For example, for cleaning windows after construction is completed apartment building. Their price depends on the volume of containers.
Conclusion
Now you know how to clean tape from plastic and other materials, and you can do it with less effort than before. You can use a combination of several methods at the same time. For example, heating and then any liquid product.
But, judging by the reviews of experienced people, ordinary vegetable oil and special formulations “work” best. You can verify this by watching the video in this article. But I would be interested to know about your experience. Write in the comments.
From the article you will learn:
Regular adhesive tape or its masking analogue is often used when carrying out household and construction work.
It is a narrow or wide film tape (paper, fabric - in the case of masking tape) on which an adhesive composition is applied on one or both sides.
Depending on the thickness and characteristics of the adhesive, tape can be weakly or strongly fixing, as well as instantly sticking or requiring time to set to the surface.
Unfortunately, this useful working material has a significant drawback - traces after its use are difficult to remove from some surfaces. One of these surfaces is plastic, and therefore the problem of cleaning plastic windows from traces of adhesive tape is quite relevant today.
Removing glue residues from plastic frames is complicated by another circumstance - the aesthetics of the structure and changing its color should not be allowed under any circumstances. Proven methods available to every owner help to successfully cope with the task.
Method No. 1
If the tape has recently been removed from the plastic surface and the remaining glue has not yet hardened, then stick it to the stained areas new duct tape, press it down well, and then quickly tear it off. To completely remove traces, the procedure will have to be repeated several times - but this method is guaranteed not to damage the surface of the plastic. In case of failure, you can use a regular stationery eraser to erase pencils and remove the glue from the tape with its help, simply erasing it.
Method number 2
A cleaning agent that is safe for plastic windows can be prepared from available household products. Need to take regular baking soda and dilute it with water to the consistency of thick sour cream. This composition is applied to the frame and left for 2-3 minutes, and then removed with a cloth soaked in water. If the remaining adhesive tape is not cleared the first time, then the mixture is applied again. Just like the first method, this procedure allows you to effectively remove unsightly traces of glue without worrying about the loss of aesthetics of the structure.
Method number 3
If you have to decide how to clean plastic windows from tape that was removed a long time ago, and the dried glue has already become firmly embedded in the surface, then it can help neutral alcohol-containing composition: vodka, alcohol solution, colorless lotion. Soak a sponge or lint-free cloth with them and gently wipe the contaminated area. Before starting work, it is recommended to test the solution on a small area hidden from view - not all types of plastic can withstand the effects of alcohol (it may change color or deform the surface).
Read also: Window ventilator for plastic windows. Types and capabilities
Method number 4
You can also help get rid of glue residue on a plastic window. household products without aggressive components. It is better to choose formulations in the form of a fine powder, gel or solution, since substances with large crystals can leave scratches. A sponge or washcloth is moistened with the mixture and wiped over the frame, increasing pressure in areas with glue residues.
Suitable for cleaning windows and dish gel, as well as glass cleaning spray. The spray should be sprayed onto the adhesive stain and begin wiping off after 5-10 minutes. After using the spray, the frame should be rinsed with clean water.
Method number 5
To remove stuck tape, you can use special chemicals sold in hardware or construction stores. As a rule, they are released in the form of aerosols and are convenient for work, but are quite expensive. After spraying the substance over the surface with tape, a reaction occurs that dissolves the glue, and the tape is removed without any difficulties. Remains of dried glue also quickly dissolve and to remove them you just need to wipe the plastic with a regular cloth.
Manufacturers promise that their products are safe for window plastic, but still recommend checking for no reaction to small areas before work.
Method number 6
Enough effective means for cleaning adhesive tape are considered white spirit and gasoline without impurities. They quickly dissolve the adhesive base and clean the plastic, but can also damage its surface. Not all types of frames can withstand such contact. In order to check whether such solvents can be used in your case, wipe them on an inconspicuous part of a small window and look at the reaction. If after 5-10 minutes the surface has not changed color or shape, then the product can be applied to the entire window.
Method number 7
Tape and its traces can be removed from windows made of heat-resistant material by heating the frame with a hairdryer or household steamer. It is not necessary to warm up the entire window, since by pulling the loose end you can remove most of the adhesive tape. The marks left after removal are heated just a little and washed off with a sponge or damp cloth.
Read also: Accessories for plastic windows. What do they include?
Blitz survey: Do you lubricate the fittings of your plastic window?
Poll Options are limited because JavaScript is disabled in your browser.
For non-heat-resistant plastic, there is a more gentle version of this procedure: apply a cloth soaked in hot water to the stuck tape. The material is rolled up in several layers and wrung out well. To obtain the desired effect, the “compress” will have to be applied to the stuck area 2-3 times. If this effect is not enough, then use a rubber spatula or scraper.
Method number 8
In order to clean plastic window from tape, will do regular liquid oil: sunflower, flaxseed, olive, etc. Apply a generous layer of oil to the surface along with the tape, and after 10-15 minutes, remove the tape or its traces with a rag or sponge. Remaining oil is washed off the frame with soapy water. If instead edible oils If you use aroma oil, the room will smell pleasant for a long time without any fresheners or deodorants.
The method is absolutely safe for any type of plastic.
Method number 9
The traditional mechanical method of removing complex stains from plastic windows has not been canceled, especially if they have existed for a long time and are strongly ingrained into the surface.
One of the options mechanical cleaning is to gradually remove the remaining tape by hand, but this work will take a lot of time and will not rid the material of traces of glue.
Another option involves using a sponge with a cleaning layer, rubber scraper and laundry soap. A rough layer of a damp sponge is soaped and the frame is wiped with it. The surface should be completely wetted with a soap solution, which is left for a short period of time (5-6 minutes). Using the sharp part of the scraper, you need to pick up the tape and gradually separate it from the window. Wetting with a soap solution is repeated as necessary.
After wiping off the tape, any remaining glue is removed by wiping the frame with the hard side of a soapy sponge. For complete cleaning you will have to make a significant effort and be patient.
Method number 10
Enough in an original way getting rid of leftover tape is using toothpaste. In this case, a layer of toothpaste is applied to the surface of the plastic frame and left for 5-10 minutes. Then, the frame with the dried paste is thoroughly wiped with a dry cloth and washed with soap and water.
After using tape, there are always marks left on the glass that need to be removed. This is not so easy to do. This glue is not washed off with water, cannot be removed with a damp cloth, and removing its sticky traces requires some effort. But modern housewives know effective ways How to remove tape from glass. We invite you to choose the most suitable one and test it personally.
Vegetable oil
Regular vegetable oil will help to cope with traces of glue from adhesive tape. Soak a cotton pad in it and wipe the stained areas. Leave for 10-15 minutes, and then remove the softened glue residue with a damp cloth. You can remove vegetable oil from glass with a dry sponge.
Solvents
To remove remaining tape, use any available solvent - acetone (nail polish remover), white alcohol or gasoline. When using such products, do not forget about safety precautions, as their pungent odor can cause dizziness. Work with solvents in a well-ventilated area.
Soak a cloth or cotton swab in the product and wipe the stained area with it. After some time, thoroughly wash the glass with soapy water or a special product. Avoid contact of solvent with plastic surfaces, and after cleaning, rinse off any remaining solvent with water. Remember, such products are not suitable for cleaning frosted glass.
Alcohol
Alcohol or any alcohol-containing product (vodka or alcohol tincture) will help remove remaining tape from glass. When using a pure product, it must be diluted with a small amount of water. Soak a cotton swab in the resulting product and wipe the stained areas with it. All traces of glue from the tape will be easily removed. When finished cleaning, wipe the glass with a dry cloth to remove alcohol stains.
Special means
Special glass cleaning products will help in the fight against tape residues. A wide range of products allows you to choose a detergent according to your wallet and personal preferences. Among housewives, Cillit Bang, Vanish, Mister Proper, Mister Muscle and others are especially popular.
Spray any of the previously listed products onto the dirty surface and leave for 5-15 minutes. Wash off any remaining product and glue with a clean sponge and water.
Soda
A tool available to everyone - baking soda - will help remove traces of tape from glass. Dilute the powder in a small amount of water to obtain a thick paste. Apply the resulting mixture to a sponge and wipe the glass in the dirty area with it. Rinse off any remaining product with water and a soft washcloth.
Eraser and blade
Small adhesive residues can be removed using a blade. You need to work with such a tool very carefully so as not to get hurt or scratch the glass. To avoid scratches, always keep the blade strictly parallel to the surface. Although the process is quite labor-intensive and requires dexterity, it is quite effective and is suitable when other methods are not possible. A stationery eraser will also help to erase traces of glue from the tape.
Other means
As alternative methods you can use:
- Essential oils. Simply apply the oil to the tape marks and wash off with a damp sponge after a few minutes.
- Special products for removing sticky traces of tape and stickers. You can purchase it at an office supply or automotive supply store. Apply a small amount of product to the stain and remove with a napkin after a few minutes. This substance will effectively remove tape not only from glass, but also from furniture, mirrors and other surfaces.
- Home remedy. Lather dishwashing detergent in hot water and apply the resulting solution to the stained area. Wash off the softened glue clean water and a sponge.
Both masking tape and stationery tape can leave unsightly marks on any surface, including glass and mirror. As the glue dries, it accumulates dust and dirt, making the marks even more noticeable. In such situations, you need to know how to clean glass from tape, giving it its original appearance, without damaging the surface.
How to clean glass from tape: special products
You can find it in specialized stores as well as in stationery stores. chemicals, which help get rid of the glue remaining after using any adhesive tape, including on a glass surface. They are often all-purpose cleaners.Most of these products are toxic, so it is important to strictly follow the instructions and take precautions. It would be a good idea to protect your hands with gloves from getting the substance on your skin, and cover your nose and mouth with a mask or piece of cloth. Thus, caustic vapors and volatile particles from aerosols or sprays will not enter the respiratory tract.
Most effective options The following means are considered to help resolve the issue of how to clean glass from tape:
- "Mr. Muscle";
- "Mr. Proper";
- "Palmyra" in the form of a thick paste;
- “White spirit”, which also helps from traces of masking tape;
- "Anti-scotch";
- Various adhesive removers with different names and price ranges.
How to use chemicals to remove tape from glass?
Before you begin, be sure to use a glass ceramic blade or spatula that will not damage the smooth glass surface. Such tools will allow you to remove remnants of adhesive tape, as well as clean off the bulk of the glue, even in a situation where the trace of adhesive tape is old.A small amount of the substance is carefully applied or sprayed onto the selected surface. Then it takes 10-15 minutes for the product to eat away the remaining glue. After this, the glass is wiped with a dry cloth or thick cloth.
In use situation white spirit It may be necessary to apply the mixture to a hard sponge (not metal!). Then it rubs the trace of the tape for some time.
Typically, universal solvents do not leave marks or streaks on the surface. But if this happens, the glass can be washed with a soft sponge and soap or liquid cleaning agent.
Chemical-free cleaning methods are effective and inexpensive. And they cause less harm to health. The selected product is applied to the fabric or directly to the glass and the remaining trace of the adhesive tape is wiped off.
You can use available tools in two ways:
- applying to the selected surface and leaving to act for 10-20 minutes;
- or the cut is wetted in the product soft fabric, cotton pad, gauze or bandage, after which the surface is wiped.
Some materials have very strong and specific odors. To prevent the concentration of unpleasant amber in the room, you need to either open the windows or add a few drops to the solutions aromatic oils. Essential oils will not affect the process of cleaning glass from tape, but will get rid of the unpleasant odor.
To the most effective folk remedies against adhesive tape include:
- acetone;
- kerosene;
- vodka;
- medical (ethyl) alcohol (from 70%);
- alcohol medicinal tinctures: motherwort, corvalol, valerian and so on;
- ammonia (6%);
- purified gasoline for lighters and AI-95 gasoline;
- petroleum solvent, removes traces of different types tape quickly and effectively;
- any nail polish remover may require several cleaning steps, especially if you use acetone-free liquid;
- alcohol-impregnated wipes or special cosmetics cotton pads impregnated with nail polish remover;
- regular vegetable oil: olive, sunflower, etc.;
- hot water with shavings of exclusively laundry soap diluted in it.
When oil is used as the main option for cleaning tape from glass, at the end of the procedure, its excess is wiped off with a soft, dense cloth. And then you need to wash the area of glass or window using detergent or a special cleaner to get rid of stains and oil films on the surface.
Do not use alcohol-based colognes or lotions to remove tape from glass. The glue will come off, but there will be white streaks on the surface that are difficult to wash off.
Additional tip for cleaning glass from tape
This method can be effective only in the case of a completely fresh trace of adhesive tape on the glass surface. It is necessary to stick a fresh piece of tape to the desired area on the glass, not larger than the size of the stain. And then, with a sharp movement, tear it away from the glass or window. Repeat the procedure until the adhesive base on the glass disappears.
Dealing with tape on glass surfaces can be a challenging task that requires patience and time. But it is still possible to get rid of unsightly traces of glue with some effort and, if necessary, combining the described methods.