DIY makeup table. Make a dressing table with your own hands: features, recommendations. How to assemble a dressing table

Every woman dreams of a small place where she can put all her accessories and cosmetics. It is not always possible to buy a ready-made dressing table. This is due to its high cost and not always suitable sizes. As for a custom order, it can be even more expensive. Therefore, it is more advisable to make a dressing table with your own hands. It’s simple, the main thing is to devote enough time and think through its design. The design of the table should include work surface, shelves, drawers and a mirror.

Dimensions of the dressing table.

Additionally, such a dressing table can be equipped with lamps. They can also be used as night lights if equipped with a dimming system.

In order to make a dressing table, you need to use laminated chipboard. The color is chosen at your discretion. If desired, you can combine several colors. If possible, you can order parts; to do this, provide the dimensions to the appropriate workshops, where they will cut you necessary elements table If this is not possible, you can deal with it yourself, at home. To do this you need to acquire a special tool.

Tools you will need to make your own table:

Dressing table assembly diagram.

  • screwdriver, you can use a drill;
  • electric jigsaw;
  • roulette;
  • construction corner, 30 cm long will be enough;
  • drills, required dimensions- 8 and 5 mm in diameter;
  • screwdriver, it is very important to purchase a hex model;
  • iron;
  • a pencil for basting, a hammer, and sandpaper.

If the table parts have been ordered, you can immediately begin assembly. If this process is carried out independently, it is necessary to start with measurements and drawing contours on a sheet of chipboard. It is very important to measure correctly and only then cut. In order to make the dressing table perfect, it is better to take measurements several times.

For a dressing table it will be enough to use a sheet thickness of 16 mm.

After all the parts are cut out using a jigsaw, the ends must be cleaned with sandpaper. This should be done carefully so as not to damage the lamination.

Assembly components

The next step is assembly. Almost all cabinet furniture has the same fastening systems. They can be purchased at any hardware store in the hardware department. For a table with a shelf and drawers you will need the following set of fittings:

General view of the dressing table.

    • confirmat size 5x70 mm, can be purchased with a reserve;
    • self-tapping screws measuring 4x16 mm;
    • self-tapping screws measuring 4x25 mm;
    • for drawers you need to purchase roller guides, the size and quantity depends on the size of the structure;
    • handles for drawers;
    • soft edging for ends;
    • adhesive-based melamine edge, it is recommended to take extra;
    • metal furniture corners;
    • glue for the mirror, you can use mechanical fasteners;
    • for the handles you need to select screws.

    Features of the assembly process

    If the design of the table involves curved lines, do not rush during the cutting process. It will depend on how the parts are prepared appearance designs.

  1. The prepared parts must be processed from the end side. To do this they need to be primed. This can be done using regular Moment glue. This technique will make the edges of the chipboard more durable.
  2. After complete drying, you need to apply another layer of glue and put on the edging. The soft edging is used only on the upper tabletop. To finish the ends that are not edged, use a melamine edge.
  3. In order to glue it, the ends also need to be cleaned. The melamine edge is glued using a regular iron. Applying one end of the edge to the end, iron it with a well-heated iron (up to 3-4 power). The iron needs to be passed over the top several times until it is completely glued. Press well with a dry cloth. After cooling, trim off excess elements. It is very important to use a blunt object that will not damage the laminate. The edge is cleaned with fine sandpaper.
  4. Finished parts can be assembled. Roller guides for drawers are installed in disassembled form. The entire structure is assembled by confirmants. The base of the table is assembled first, then the section with drawers or cabinet. All departments are connected to each other. During the assembly process, you should check with a construction angle that the angles are 90 degrees.
  5. The final step is installing the mirror. It is first secured to a prepared chipboard part. A more reliable option for fastening are mechanical holders that are screwed into the base of the chipboard.
  6. The entire structure with the mirror is attached under the tabletop. For additional strength, it is necessary to install guides that will hold the structure with the mirror. A correctly installed mirror should not be movable.

For greater convenience, such a table can be equipped with lamps with daylight. Making a dressing table with your own hands is quite possible, the main thing is to follow the recommendations and be patient and attentive. And a table made with your own hands will delight your beloved woman.

Children are our miniature version. They try to imitate us in everything. In this regard, copies of adult furniture have become popular in stores. These include children's dressing tables. Even the smallest children know about such a product, since almost every mother has such a thing on which cosmetics and various care products are stored. Let's take a closer look at what types of children's furniture exist and whether it is possible to make a dressing table yourself.

Main purpose

The dressing table characterizes a purely female territory. This is where all the power is given to cosmetics. A little girl also wants to have a corner like this to feel big and grown up. Furniture manufacturers could not ignore this interest and introduced special children's corners in stores. They all differ in:

  • size;
  • age;
  • growth;
  • cost;
  • compactness.

Children's dressing tables are produced just like adult models, only in miniature sizes.

Materials

Such furniture is made from various materials. You can meet various models:

  • Wooden. As a rule, these are exact copies of adult furniture. Can be found with a mirror and various additional shelves and drawers for storing things and themed trinkets.
  • Plastic. As a rule, these are interactive tables that are accompanied by various sounds and lights. Such models are made in a studio adult style, or they are completely toy collections that are intended for dolls.

A little about security

It’s worth noting right away that you need to choose children’s furniture only from quality materials, which do not highlight toxic substances and noxious odor.

If you choose a wooden dressing table for your little princess, then it is better to use the following simple tips:

  • choose only high-quality laminated chipboard or MDF;
  • materials must be of group E1 (the presence of formaldehyde resins in them is minimized);
  • shouldn't be sharp corners;
  • All parts must be assembled with high quality.

If you are looking at a plastic dressing table:

Note!

A children's dressing table is a great addition to a little princess's room. Its presence is a must for young fashionistas. This way they have the opportunity to develop properly.

If you purchased a model with a mirror, then choose one that is covered with a special anti-splinter film. This will protect the child from various injuries if used carelessly.

Possibility of self-production

The design of this piece of furniture is quite simple. If you don’t have time to make a complex drawing, then you can make a simple tabletop with legs and mount the mirror on the wall. Complex models contain various drawers and shelves. If you are familiar with woodworking, you can decorate the product.

Note!

Be sure to make detailed drawing future dressing table. If you do not have such experience, then you can use the help of professionals.

To make a product with your own hands, it is worth considering in more detail the materials and tools that will be needed for the work.

Materials

For work you can use:

  • Chipboard or laminated chipboard. More and more often furniture craftsmen This is the material they use. It is lightweight, affordable and easy to process. For work you will need sheets about 16 mm thick.
  • MDF. This material has a higher cost, which pays for itself. The furniture is wear-resistant and durable.
  • Tree. This material is suitable only for real professionals. If you have no work experience, it will be difficult to cope with it.
  • Fiberboard. If the design implies the presence of drawers, then this material is chosen for the bottom. It is also used to seal the back wall.

Tools

To make the job easier, prepare:

Additionally, you may need some accessories:

Fastening element

To assemble the dressing table you will need:

  • furniture confirmations;
  • wood screws;
  • roller guides (if there are drawers);
  • metal corners for furniture;
  • various accessories;
  • furniture edge.

Note!

The main thing in children's furniture is the design. It should be colorful. Give preference to rich and bright shades.

Step by step instructions

Let's look at how to make a children's dressing table with a mirror. For a positive result, do everything carefully and according to the instructions:

  • Trace the mirror onto a sheet of plywood or fiberboard. Be sure to make indents to create a beautiful and large frame. These outlines can be made in the form of a floral design or a cat's face.
  • Cut out the workpiece.
  • Attach the mirror to a base made of chipboard. For this, furniture corners or glue are used.

In addition to this table, you can build a chair. Children's furniture can be decorated with lighting. In products of this type, it plays two roles:

  • decorative;
  • functional.

In the first case, a multi-colored LED strip can be used. It is mounted everywhere except the countertop. Functional lighting is installed in a mirror frame. The glow should be as natural as possible.

As you can see, making a children's dressing table is not as difficult as it seems at first glance. The design is easy to think through on your own. If you can’t make furniture with your own hands, you can always find ready-made option, which will appeal to the little fashionista.

Video

The video review examines in more detail the interactive model of a children's dressing table.

Every girl needs to take care of herself. It can sometimes be very difficult to find this or that cosmetics, mirror or comb. A dressing table will help you cope with this small problem. It can be made in the form of a dressing table with or without a mirror, and even with lighting. Such furniture can be made not only multifunctional, but also beautiful, which will significantly transform the interior of your apartment. Most often, such a product is installed in the bedroom, hallway or bathroom. This is a very convenient thing due to the fact that all the necessary items will be at your fingertips. Making a dressing table with your own hands is not easy, but it is quite possible if you start by building a simpler structure. Today we will tell you how to do this.

DIY dressing table - preparation and materials

Before starting to manufacture the product, you need to complete a certain action plan: carry out preparatory work and purchase required material and other components. Let's look at each of these stages in order.

Preparatory work

Without execution preparatory work you are unlikely to be able to build a beautiful, stable and durable structure. Below are instructions that are suitable for absolutely any dressing table. So, let's take a look at it:

  • We carefully consider the location of the structure and its compliance with the overall picture of the interior.

Important! It is advisable that the table be made in soothing colors that would please the immediate owner.

  • We create a drawing of a dressing table with dimensions. We indicate on the sketch the desired length, width, depth, height, size and number of shelves. In the case of furniture with a built-in mirror, write its parameters on paper. If the table will have additional lighting, then we mark the locations of future lamps with a description of the method of attaching them. You can make such drawings yourself or take ready-made diagrams from the Internet.

Important! We pay attention to cabinets and shelves special attention, because their size and quantity directly depend on the dimensions of the product and your wishes. Here it is important to take into account all the nuances: where you will put cosmetics, a first aid kit, books and other necessary things. If you have a lot of stuff, then add open side shelves to the design.

  • We choose a mirror, if one is available. Based on its parameters, we will select fasteners that will hold it.

Important! It is advisable to choose a mirror with thick walls so that you do not worry about its integrity and safety.

  • The material that you choose for making the frame of the dressing table must be well sanded, the edges carefully processed, and then covered with plastic corners.

Materials and tools

Structurally, it is not so difficult to make a simple dressing table. For example, you can make a small chest of drawers and attach a mirror parallel to the wall. The only thing needed is drawers for accessories.

List of materials to choose from for the manufacture of the frame, side walls, bottom and shelves of this product:

  • Chipboard or laminated chipboard sheets 16 mm thick. These are the most common materials in furniture production. They have a number of advantages: they are inexpensive, lightweight and easy to process at home.
  • MDF sheets. Considered expensive due to its high quality, efficiency and durability.
  • Tree. Only those craftsmen who have experience in carpentry take on such material. Wood is easy to process, but to cut out parts you need a milling machine.
  • Plywood or fiberboard. Used to make drawer bottoms and furniture back walls.

Required fasteners:

  • Confirmats size 5x70 mm.
  • Self-tapping screws measuring 4x16 mm and 4x25 mm.
  • Metal furniture corners.
  • Roller guides for free movement of drawers.
  • Accessories for doors and drawers.
  • Plastic edge with adhesive base.

Tools:

  • Drill or screwdriver with a set of attachments.
  • Jigsaw for cutting chipboard, laminated chipboard, MDF sheets.
  • Drills with a diameter of 5 and 8 mm.
  • Construction corner.
  • Roulette.
  • Screwdriver for tightening confirmations.
  • Sandpaper of varying degrees of grit.

Additional accessories and parts:

  • Mirror the right size.
  • Plastic inserts for sashes (for glass - glass).
  • LED strip.
  • Decorative panels.

DIY cosmetics table without mirror

This is the simplest option, ideal for a beginner. So, here is a detailed master class on how to make such a small chest of drawers for accessories:

  • We put ready-made sketches of the details of our future product on the chipboard sheets.

Important! You can easily cut the sheets at almost any hardware store for a small fee. This way you will be confident in the quality of the work of specialists. If you still do not have this opportunity, then cut the material into parts using an electric jigsaw.

  • We clean the ends of each part with sandpaper: first coarse grit, and then fine.

Important! You should not be upset when you see chips on the edges of the sheets, since after all the work is completed, any flaws will be hidden by the end tape.

  • We prime the ends twice to give greater strength to the edge. Moment glue is good for this. We put a soft edging on the tabletop, and then we cover the ends with a special melamine edge, which we apply to the edge and iron it with an iron.
  • We assemble the frame of our table: table top, side walls, legs, back wall. We drill holes to secure all the elements together. We fix the parts with confirmations, check the corners using a building level. After we are convinced of the correct assembly of the structure, we tighten the confirmat with a suitable wrench.
  • Duplicate metal corners side walls and support legs of our product.
  • Now let's collect the boxes. We drill out all the side parts into the plane, and the front and back parts into the end. We assemble the table for confirmation, check the quality of the assembly, and then tighten the fastenings with a screwdriver. We fix the plywood bottom with small nails.
  • We attach one roller guide to the side screws, and its second counterpart to the walls of the cabinet. We thread the drawer into the installed guides.
  • Since our table has doors, to install the hinges we will need a Forstner drill with a diameter of 35 mm. We make holes for the hinges with a depth of 12.5 mm. We secure the hinges with strong screws. We fix the hinges to the sash with ordinary self-tapping screws.
  • We drill holes for handles on the front of the drawers and doors of the product, and then secure the fittings tightly.

Assembling a dressing table with a mirror

This method is a little more complicated than the previous chest of drawers without a mirror, but it is also quite possible to do it. Let's look at the two main ways to make it.

First method:

  1. We cut out the back wall not from a fiberboard sheet, but from a chipboard with a prepared base for the future mirror. It can be used as a functional fixture or as a decorative frame of various shapes.
  2. We fix the purchased mirror into the frame using plastic holders. For these purposes, you can use “liquid nails” or double-sided tape.

Second method:

  1. From sheets of plywood we cut out the desired shape for the mirror. It can be rectangular, square, round or shaped.
  2. We attach the mirror with “liquid nails” to the cut out canvas.
  3. We screw the still separate part to the back wall of the base of the previously made dressing table. We carry out this work with self-tapping screws, screwing them as much as possible to the top part with the mirror.

DIY dressing table with mirror and lighting

In a chest of drawers, built-in lighting can serve one of two functions - practical or decorative. For last option you will need an LED strip, preferably colored. It is placed along the edge of the table, along support legs or at the bottom of furniture.

Important! It is very simple to install such lighting: the places where it can be cut and joined are marked on the tape. Do not forget that the tape operates from an electrical network, the voltage of which must be at least 12 W. This will create a slightly dim light on the coffee table.

Technique for making a backlit cabinet:

  1. We collect from wooden planks 20 mm thick and 90 mm wide, the main frame is the size of our mirror. We connect all the parts together with wood glue. We file the ends at an angle of 45 degrees. We fix the structure in the corners with metal corners.
  2. We drill holes in the frame that are needed to install light bulb sockets. We glue the outer frame from the thinnest slats. It is this that will hide the wires of our backlight.
  3. We fix the furniture corners to the base, then place the mirror on them. We connect the cartridges parallel to each other.
  4. We paint the product in the desired color. We are waiting for it to dry completely.
  5. We bring out the power cord through one hole made.
  6. Now we screw the light bulbs into the sockets and check the lighting operation.

    7. Now you know how to make a dressing table with your own hands. According to the above instructions, this is not so difficult to complete, especially since you can start with more simple model, and then improve it.

Making a dressing table with your own hands - is it possible if you are not a professional furniture maker? It turns out that everything is possible if you really want it and make every effort to achieve your goal. Even beginning home handyman can make such a table on his own. For registration finished product can be used various options decor.

Decorating a dressing table with your own hands is also quite simple. It is important to choose the right style and design elements, only in this case you will get a thing that fits harmoniously into the interior rooms. For example, if you need an antique table, it would be appropriate to use artificially aged painting or decoupage technique for a romantic interior will suit decoration with rhinestones or beads.

DIY dressing table: where to start

Structurally, such furniture is extremely simple. The most affordable For a novice craftsman, the option is a regular table with four legs of the required size. Even a mirror in this design is not necessary, since it can be hung on the wall. Complicating the furniture are various drawers, cabinets, shelves and tabletops of unusual configurations. This must be taken into account when creating a project. By the way, to be sure of the accuracy of all calculations, finished project It's better to find it on the Internet.

To make a dressing table with your own hands, the craftsman will need the source material. It could be:

  • Tree. Suitable only for experienced craftsmen. Wood is easy to process, some species have a very affordable price, but its finishing requires special skills and the availability of at least milling machine. Otherwise, the furniture will be durable, but ugly.
  • Chipboard. The best option for beginners. Easy to process and affordable. For work, you should choose slabs with a thickness of 16 mm.
  • MDF. Its properties are similar to fiberboard, but it has a higher cost. At the same time, it is more durable and beautiful.
  • Plywood or fiberboard. Used to make the back wall and bottom of product drawers.
  • When making a dressing table with your own hands, furniture makers recommend using:
  • self-tapping screws of the required diameter;
  • universal furniture fastening confirmation;
  • furniture corners made of metal;
  • roller guides used for drawers;
  • special fittings for doors and drawers;
  • adhesive finishing edge.

In addition, you will need the following tools:

  • An electric jigsaw that will be used to cut chipboard sheets. If you plan to order cutting of material, you will not need a tool.
  • A screwdriver or drill with special attachments.
  • Drills of the required diameter.
  • Screwdriver for confirmations. The tool has a specific hexagonal shape, but it is not universal. Some confirmations require a unique screwdriver, which must come with them. This should be checked when purchasing.
  • Sandpaper.

Depending on the chosen model of dressing table, additional parts may be required for the job. For example, glass or plastic door inserts, mirrors, decorative panels, LED strip, and the like.

Self-made furniture technology

In the photo, the dressing table made by yourself is no different from the one made at a furniture factory. To achieve the same good result, you must strictly follow the sequence of operations.

Cutting out the parts

We start by preparing templates. Exactly in size, we transfer the parts from the drawing onto a thick sheet of paper and cut them out. We place the resulting templates on a sheet of chipboard, trace and cut out the parts we need with an electric jigsaw. That's enough difficult work, which, if possible, is best entrusted to specialists. Construction stores often offer cutting services. A cut made using professional equipment will be cleaner, and the workpiece will be extremely accurate.

End processing

If the parts were cut out yourself, carefully clean the ends with sandpaper. If small chips form in this case, no need to worry - the end tape will cover them. We prime the ends twice to strengthen the edge. You can use regular Moment glue as a primer. After it dries, we put a soft edging on the edges of the tabletop, and cover the ends with a special melamine edge. To glue it, we use a heated iron.

Furniture assembly

To properly assemble a dressing table with your own hands, you need to start by installing the frame. We connect the tabletop with support legs or side posts and the back wall, if there is one. Drill holes for mounting in in the right places, after which we fix the elements with confirmations. We check the accuracy of the assembly with a construction angle and, if everything is fine, we tighten the confirmations with a wrench. For greater reliability of fastening the support legs and sidewalls, we duplicate them with metal corners.

Let's start assembling the boxes. Their number and shape can be very different. For example, if we make a dressing table for a girl with our own hands, there can only be two of them; for an “adult” model, more will be needed. In any case, the boxes are assembled in the same way. We drill the side parts into the plane, the front and back parts into the end. Then we assemble the box into confirmations, check the correct installation and tighten the fasteners with a wrench. We place the bottom, cut out of plywood, onto the walls of the box and nail it with small nails.

We secure the drawer guides with self-tapping screws to the side of the dressing table or cabinet. We thread the drawer into the guides. We drill a hole for the handle on the facade and install the fittings. If you plan to make your own dressing table with a mirror, back wall The product must be made of chipboard. A base for the mirror is installed on the part, which can be a special device or a frame of complex shape. We mount the mirror into the base using double-sided tape or special plastic holders.

Make your own dressing table not that hard. However, if you do not want to do it yourself, you can choose suitable model on the Westwing website. Here you can not only choose a dressing table, but also see how the product you like will look in interiors of different styles. And the profitable promotions and discounts that the shopping club offers to its members will make your purchase especially enjoyable!

Dressing table is an important and desirable attribute of any women's bedroom. This is personal territory...


A dressing table is an important and desirable attribute of any woman's bedroom. This is a personal territory where the “secret weapon” is stored, allowing women to transform themselves, take care of themselves and conquer men’s hearts.

Most of the fair sex will easily sacrifice a chest of drawers or a nightstand, but will never give up a dressing table.

Dressing table

The dressing table appeared as a piece of furniture around the 18th century. simultaneously with the birth of the boudoir - a purely female territory of the house. Unfortunately, today few people can arrange a separate “boudoir area”, so the toilet stand is usually located in the bedroom. This solution is also very convenient, because upon waking up, a woman can immediately put herself in order.

When choosing a dressing table, a girl first of all pays attention to its appearance. And this is absolutely correct, because this is perhaps the only piece of furniture that should provide mainly aesthetic pleasure. Although you shouldn’t forget about functionality either. A beautiful dressing table can be part of a furniture set or, conversely, become the main accent of your bedroom. In any case, it should lift your spirits just by looking at it.

How to choose a dressing table

When you see a charming dressing table in a store, don’t forget to evaluate its spaciousness. In fact, there is no universal number of drawers and storage compartments, because it is quite individual. However, the more different storage compartments a table has, the better. Then cosmetics, perfumes, hair products, and other little things will find their place. It will also make it easier for you to keep things organized.

However, keep in mind that large number drawers makes the dressing table visually more bulky. Therefore, in advance at the store, think about what will be stored and in which drawer. Perhaps a couple of boxes will be enough for you.

Estimate the size of the dressing table, think about where it will stand and measure the approximate dimensions. This is especially important to do if you have a small bedroom. It is also very important that the dressing table be equipped with a comfortable mirror. Rotating mirrors and trellises consisting of three mirrors are especially convenient. They allow the lady to look at herself from all sides. This is especially convenient when you are doing your hair.

If you have a small bedroom, you can buy a practical dressing table with a mirror that retracts inside the tabletop. When the table top with the mirror is up, you can put yourself in order, and when it is down, you can take notes or work on your laptop.

Dressing table - interior photo

Don’t forget to choose a comfortable ottoman or chair that fits the dressing table. You should also consider the lighting system. Next to the mirror you need to hang a lamp or sconce above the mirror or two, on both sides of the mirror.