How to get rid of squeaky doors at home. Getting rid of door squeaks. Instructions: how to lubricate the hinges of an iron door

They begin to make unpleasant sounds when using them. It could be a creaking sound, a rattling sound, or even a buzzing sound. Such sounds are annoying and disturbing, especially at night. You no longer want to enter the room without any extra reason, knowing that the resulting noise can even wake up the neighbors. In order to get rid of a squeak, you first need to understand where the squeak comes from.

Causes of sound

The door is attached to door jamb using loops. Most often, these are the main causes of unpleasant sound. The most common of them is a lack of lubrication, which causes increased friction between moving elements.

Second common cause A grinding noise when opening is caused by insufficient adherence of the hinges to the jamb. In addition, the friction of the clamps can cause sounds. A similar situation is observed when improper installation or low quality fittings.

Getting rid of door squeaks

So, having decided on the causes of the squeak, you can move on to finding ways to eliminate it. First of all, it is recommended to lubricate all moving elements. For this, a special lubricant is used, but if this is not available, machine oil can be used. The substance is applied directly to the canopy pin.

There is another method to return silence to the house. Almost all mothers use it. To work you will need graphite, used in simple pencils. The canvas is lifted using a mount or any other solid object. Pieces of graphite are poured into the resulting gap. Please note that you can use crumbs, not ground dust. A couple of movements of the canvas - the creaking disappears.

In the event that the rattling of the hinges is caused by their insufficiently strong fastening, it is recommended to remove the canvas and unscrew the canopies. In order to tighten the screws more firmly, you can use glue, which is applied to the existing holes and then the hinges are pulled together. There is an easier way to securely fix it - using screws of greater length and diameter.

Another option is also possible. The door warps when closing. The reason for this is a violation of installation or defect. You can also cope with this problem yourself. It is enough to remove the canvas from the hinges, having previously marked the place of distortion, and remove the excess layer of wood using a plane or coarse sandpaper.

By correctly identifying the cause of the squeak and eliminating it using the proposed methods, you can return the silence and comfort of using the door to your home. It would also be useful to note that it is recommended to lubricate the hinges regularly, and not wait for an unpleasant grinding noise to be heard in the quiet.

Sections of the article:

Creaking doors in any room cause a lot of trouble to their owners. The creaking of a door itself is a very unpleasant sound that you want to stop hearing as soon as possible. Each person reacts to the creaking of a door differently, some are very annoyed by it, while others are constantly afraid of it, in any case, there are no absolutely indifferent people.

Determining the source of noise by ear can be very problematic, but in most cases this is what will help to understand the source of the entire problem. The door creaks only when it is opened or closed. In order to determine exactly where the noise is coming from, you need to listen to it carefully and understand whether it is a metallic sound or a wooden one. This will help you figure out what you have to deal with.

In any case, the sound occurs for several reasons: it can come either from the hinges, or due to the fact that the door hits the frame or the floor every time it moves.

The reason for the squeak is the door frame

This is the most common cause of a door creaking and it can periodically appear and disappear, for example, when the room becomes damp, the creaking intensifies, and during heating season decreases.

In this case, everything is to blame high humidity indoors, which promotes swelling door frame. This problem can only be solved by reducing the level of dampness and humidity in the room.

If the humidity in the room is low and the door still creaks, it will be necessary to take more serious measures to find the original source of the problem. There are several traditional methods to determine the point of contact of parts.

A sheet of copy paper will help with this, which must be applied to the end of the creaking door and close it. After this, open the door and carefully examine the surface of the door frame. In the place where there is contact with the surface that makes a squeak, traces of carbon paper will remain. In addition to paper, you can use colored crayons or regular chalk.

When the desired place is found, you just need to remove the excess layer from the surface of the wood, which interferes with the normal operation of the door. This can be done using a plane. It is important to carefully mask or paint over the treated area so that it does not stand out on the door leaf.

The reason for the creaking is the hinges

The reason for the appearance of a door creaking may be an error made during the door production process, in other words, the presence of a defect. The hinges may be initially installed incorrectly, in which case you will have to dismantle the door and completely redo all the hinges again.

Also, the absence of balls in them leads to the appearance of a creaking door. To do this, you need to remove the door from its hinges and carefully insert the missing balls into them.

It also happens that door leaf rubs against the box due to severe wear on the hinges. In this case, only complete replacement of the hinges with new ones will help.

If the hinges are new and their fastening to the door leaf has become loose, you will have to replace the fastenings with other self-tapping screws or screws, but larger size. To understand that this is what is required to eliminate the squeak, placing an ax or a regular pry bar under the doorway will help. When they lift the canvas, the loops will be unloaded and the sound will disappear.

Another option for a creaking door and its hinges can be the usual friction of them against each other. In this case, they simply need to be lubricated with oil. The most important thing is not to pour too much, because you can easily stain the door leaf with it. To achieve maximum effect, it is best to remove the door completely from its hinges and carefully process all elements of the fittings.

The following can be used as a lubricant:

Machine oil;
Solid oil;
Sewing machine oil;
WD-40 product.

WD-40 has become very popular and is found in the glove compartment of almost every motorist. This multi-functional lubricant is based on white spirit, which will help get rid of squeaks in the door for a long time. The oil in this product is less than half of the composition, but the desired effect is achieved by dehydrating and cleansing the surface.

If you don’t have any of the above remedies at hand, the usual ones will do. sunflower oil or wax. The most important thing is that any oil does not contain graphite. After the procedure has been completed, you can put the door in its place. If everything is done correctly and the problem really was due to poor lubrication of the hinges, the creaking of the door should completely disappear.

Another reason why the doors in your apartment squeak may be hinges covered with rust.

Do not rush to change the loops for new ones, give them fresh look you can do it yourself using available materials. To do this you will need oil and a rag or sponge. Dip the cloth in oil and apply it thoroughly to the rust. If the rusty formation has appeared recently, then under the influence of oil it will quickly come off. If it is already quite old, it will take a lot of time to eliminate it.

In order to avoid the re-formation of rust in the future, it is necessary to periodically lubricate the moving parts. metal elements doors with special oil.

If a metal door creaks

If you notice that the squeak is coming from metal door, then most often the reason for this will be the presence of sagging door leaf. Metal structure It has a lot of weight, which can cause unpleasant sounds when used for a long time.

One more possible reason The door may be installed incorrectly. In this case, in order to avoid further deformation of the door, you must contact a specialist who will have to correctly reinstall the door.

It also happens that in addition to the fact that the door creaks, it is also observed that it does not close tightly. It will feel as if something is blocking the normal movement of the door. In this case, you should check the hinged hole for debris or chips that may get there during repair work.

A squeaky door will get on anyone’s nerves, so I want to get rid of the grinding noise and find something to lubricate the doors so they don’t creak.

We will also consider what to do if the lock does not open well and give advice on caring for the keyhole.

First, let's get acquainted with the types of doors. They are divided into types depending on their location, the material from which they are made and the opening mechanism.

Based on the first feature, door structures are divided into:

balcony;
kitchen
bellhops;
living rooms.

Others lead to stairs upstairs or to the attic of the house.

Depending on what the doors are made of, they can be wooden, plastic, laminated or glass.

And even this is not the end of the list of door types.

If we talk about the opening method, doors can be sliding or folding.

Why does the squeak appear?

An unpleasant grinding noise when opening interior and other doors at home can occur for the following reasons:

In case of deviation from the manufacturing rules. If, while producing the door structure, you made a mistake, for example, you welded the hinges incorrectly, then squeaks will certainly appear during operation. And to get rid of uncomfortable sounds, you will need to dismantle the entrance group;
If the structure is not specially lubricated. Hinges that are not lubricated with a special compound move with a characteristic squeak. The situation will be improved by a simple lubricant;
Incorrectly chosen composition for lubricating the hinge. The wrong component can be grease, which becomes thick and turns into an abrasive. It will need to be removed and another means used;
There are no balls in the loops. Then lift the door leaf from its place, insert balls into the hinges and put the door back;
The squeaking can be caused by the covering material in contact with the door when it is opened. To eliminate unpleasant sounds, you can only remove centimeters of the sheathing using scissors. If even after these actions everything remains the same, then it is better to completely replace it;
If the canvas rubs against the box. This may be a consequence of incorrect positioning of the door and its swelling due to dampness. If the first cause needs to be eliminated, the door only needs to be reinstalled. But to get rid of the second reason, you will have to dry the room;
The ends of the canvas touch the platband. Then the grooves where the fasteners are located need to be enlarged;
Loose and time-damaged hinges. The most reasonable decision in this case, supply other parts;
Poor fixation of the hinges of the door structure. To understand whether there really is such a problem, you can place something underneath, for example, an ax, with which you need to slightly lift the door leaf. Weak screws need to be replaced.

Operations to eliminate entrance door squeaks

Wanting to prevent doors from creaking in the future, they are looking for the reason for this. If the design of the door leaf stood in the apartment for a long time, then unwanted sounds could arise due to sudden changes in temperature.

This is especially true in autumn and winter. During these seasons, you won’t be able to get rid of the cause of the squeaks, but you can get rid of the consequences themselves. It is enough to take graphite powder or an ordinary pencil.

But home owners who have just recently installed new door. Very often, creaks appear due to the fact that the hinges hidden in the screws do not adhere closely to the jamb.

To prevent unpleasant sounds from bothering you anymore, you need matches and a screwdriver. You will also need PVA glue or regular wood glue.

You need to tighten the screws with a screwdriver, there is nothing difficult about it.

True, it is possible that the screws will turn. In order not to suffer with this, you need to pick up glue and matches.

The matches will play the role of a fastener that needs to be made by gluing them together.

Another reason for the appearance of squeaks is rust. It forms on the hinges if the house is damp. Therefore, the first thing you need to do is remove the rust.

Steps to get rid of squeaks in metal structures

The root cause is that door design the iron began to make creaks, which may indicate that the canvas is sagging.

Metal is heavy, so its heaviness can lead to squeaks.

Special lubricating oil will help you no longer hear squeaking sounds. The reason for their occurrence may be improper installation of awnings.

In this case, it is necessary to invite an installation specialist. He is obliged to eliminate the malfunction, otherwise the door leaf may be deformed.

If, in addition to creaking, you feel that the door closes tightly, then this indicates that metal shavings or other debris have gotten into the grooves of the canopy.

You will need to dismantle the canvas and clean it, and then insert it back.

What to do if the plastic door on the balcony creaks?

The grinding noise can be caused by worn hinges or rust that has covered them.

Getting rid of rust is easy, you just need to open it balcony door and coat the fasteners with machine oil on the balcony side.

Hinges should be lubricated as follows:

Open the plastic balcony door structure and place a wedge under it;
Using the lever, you need to lift the blade up a little;
Opened rods and other elements of the plastic door structure should be lubricated with an oil composition. You don’t need to pour a lot of it, you just need a few drops, so it’s easier to use a syringe;
After this, it’s time to lower the canvas into place;
Remaining oil is removed with a cloth.

If attempts to eliminate squeaks plastic construction did not lead to anything, which means that the fittings have served their purpose.

What means to eliminate squeaking?

The operation of eliminating a squeak is not at all difficult; thanks to machine oil, you can get rid of the squeak forever. This is the most popular product and can be purchased at an auto parts store.

But there are other oils that can eliminate noise. You can simply use sunflower or olive oil.

True, the result will not last long, since such a product does not particularly clean the surface and contributes to clogging. Perhaps after a couple of days the already annoying squeak will appear again.

Therefore, experts do not recommend using oils; they can shorten the shelf life of fasteners.

There are options to do without oil. You can use solid oil. It should not be poured, it is better to apply it.

A wooden stick will help with this. If you have to smear the loops with your finger, be careful not to pinch your hand.

Graphite from a soft pencil will eliminate problems. The easiest way to extract graphite is to set the wood on fire.

The rod must be crushed and the grains poured into the hinge slots formed as a result of lifting the door structure.

When the blade is put into place, the graphite is crushed, turning into a lubricant to combat friction.

The slate chips will be completely crushed if you open and close the doors several times. This product provides excellent protection against rust.

The store sells special sprays suitable for lubricating various parts and mechanisms.

The most common is WD-40 aerosol. They need to spray the areas that are causing the squeaking. It will also come in handy when you need to lubricate the door lock.

The product must be applied locally and precisely, without leaving marks on the entire surface.

Wax or drops of paraffin from a candle can eliminate creaking sounds. In this case, you need to act carefully.

Additionally, you can treat it with a special agent and door lock, because it can also cause problems.

Special care and periodic removal of dust from the lock mechanism will help you not to be afraid that one day the door lock will not let you into the house.

Steps to take care of the lock well:

Spray a cleaning spray into the lock hole, which will flow out from the inside;
Dampen the lock cylinder with a cloth, place it there and immediately remove the key. This way the mechanism will not jam and dust will not spread inside;
After the key is pulled out, the larva is wiped again;
The pattern is repeated until dirt stops sticking to the key being removed;
After cleaning, you need to spray a couple of drops of oil into the well and turn the key.

As for the choice of lubricant, machine oil is also applied to the lock. But here it is important to consider the type of lock.

Lever or safe locks are lubricated with graphite dust. It is better not to use conventional lubricants, otherwise the key may get stuck without opening the lock.

Most owners of houses and apartments are faced with a situation where the door creaks. This is an unpleasant sound that causes constant inconvenience. Today there are many means by which you can get rid of this problem. To understand which one should be used, you need to understand the causes of the squeak.

First, let's get acquainted with the types of door designs. Doors are divided into types according to several criteria, the main ones being:

Locations. According to this principle, a distinction is made between interior and entrance door structures. Doors are also distinguished:

kitchen;
balcony;
bellhops;
living rooms;
staircases;
attics.

Another criterion on the basis of which classification is carried out is the material of manufacture. Doors are divided into:

wooden;
metal;
veneered;
laminated;
glass;
plastic;
mesonite;
combined designs.

They also differ in the way they open. Along with traditional models that open by swinging, there are sliding and folding structures.

Causes of squeaking

You can select following reasons, leading to squeaking:

Manufacturing errors. If the hinges were not welded correctly during the manufacturing process, the door will make a creaking sound during operation. To eliminate it, the loops need to be digested. This will require dismantling the door.
Lack of lubricant. If the hinges move “dry,” the result is a characteristic creaking sound. Here the situation can be corrected quite simply, you just need to treat the hinges with lubricant.
An incorrectly selected lubricant composition also leads to such consequences. This problem often occurs when using solid oil; it tends to thicken and turn into an abrasive. Then it will have to be removed and the structure lubricated using another means.
Lack of balls in the loops. The canvas needs to be removed, the balls placed in the loops and installed again.
The door trim creaks as it comes into contact with the door leaf as it moves. In some cases, it is enough just to trim the skin at the point of friction. If after this the problem does not disappear, the covering material must be completely removed.
Friction of the canvas against the box. The reason may be incorrect location door or increasing its volume due to high humidity. In the first case, to eliminate the sound, the door must be removed and reinstalled; in the second, the humidity level in the room must be adjusted. To determine the location of friction, you need to attach carbon paper to the end, close and open the door. Then you should carefully inspect the structure. Problem areas can be easily identified by the colored stripes that will remain after the paper.
The edge of the canvas is in contact with the platband. It is necessary to enlarge the holes in which the fasteners securing the casing are located, and then move it a little.
Worn hinges. If the hinges on the doors are fastened for this reason, the only solution is to replace them.
Insufficient fixation of hinges to the door frame and leaf. Identifying this problem is not difficult. It is necessary to place an object under the door that can be used as a lever. For example, a hatchet. Next, with its help, you need to lift the canvas up a few centimeters. To eliminate this problem, replace the fixing screws or hinge locations.

How to solve the problem if the front door creaks

To eliminate a squeak, you first need to identify its cause. If we are talking about a door that has already served for a certain period, the problem is most likely caused by sudden temperature changes.

The difference between temperature indicators inside and outside the room is up to several tens of degrees. This fluctuation is especially felt in autumn and winter time. In this case, it will not be possible to eliminate the cause leading to the unpleasant sound, but you can remove the consequences. To do this, you will need graphite powder, which is available in any hardware store. An alternative could be a simple pencil.

Such a nuisance as squeaking can affect a new one, recently installed door. Let's try to understand why the door creaks in this situation:

In most cases, this happens if the hinges in the screws do not fit tightly enough to the jamb. To fix the problem you will need a screwdriver, glue and matches. You can use epoxy, wood adhesive or PVA.
First, use a screwdriver to tighten the screws more tightly. This is a fairly simple action. But it is not always possible to complete it successfully, since the screws can turn. In this case, you need to use glue and matches.
The matches should first be glued together, then the screw should be fixed in the hole using this kind of chopstick.

Another reason for squeaking is rust, which occurs on the hinges if the door is in conditions of high humidity. If the creaking sound is caused by this reason, you can get rid of it only by removing the rust:

The hinges must be generously lubricated with grease or machine oil.
In the absence of these means, ordinary sunflower or olive oil, which can be found in every home.
Creaking caused by rust can be prevented. To do this, the loops need to be treated with molten paraffin. This preventive measure has a fairly long-lasting effect.

There are often cases when the humidity level is within acceptable limits, significant temperature changes are not observed, but the door creaks. What to do in this situation? This could be due to frayed pins or improper fit. In the first case, you need to change the pins or install a new door. In the second, it is necessary to eliminate the distortion.

How to eliminate the creaking of a metal door

In a situation where an iron door creaks, the reason may be sagging panel. Distinctive feature metal material is a significant weight, so the impact of a heavy door can provoke creaking of the canopies.

You can eliminate the characteristic sound using a special oil intended for lubrication or regular machine oil. Creaking can be a consequence of errors when installing awnings. This will require the intervention of the master who performed installation work. He must eliminate the defect, otherwise there is a possibility of deformation of the structure.

If, along with a creaking sound, a heavy closing of the canvas is observed, then this may indicate that metal shavings or debris have entered the hinged hole. Here you need to clean the canopy. But to do this you will need to remove the door leaf, clean the awnings, lubricate them and reinstall the door.

How to fix the situation if the plastic balcony door creaks?

This may occur due to wear on the hinges or rust on them. Removing rust is not difficult; all you need to do is lubricate the hinges with oil. The door should be in the open position, and the oil should be applied from the side of the balcony.

If these actions do not produce results and the creaking continues, we can conclude that the hinges are worn out or the fittings have failed. In this case, you will need the help of a specialist.

How to lubricate a door so it doesn't squeak

Machine oil is suitable for this purpose. It can be found in any car owner or in a house where there is sewing machine. You can purchase this product at a car store. It is worth considering some features of the use of oil:

The most convenient to use is oil in plastic tubes, which allow you to treat hard-to-reach places.
If you use lubricant without tubes, you need to process the hinges using a syringe. In this case, it is advisable to raise the door a little, this will allow the halves of the hinges to be separated.
You can use graphite lubricant. To prepare it, you need to plan the graphite from a regular pencil using a knife and mix the resulting shavings with any oil. The lubricant mixture is ready. Graphite pieces can be placed in door gaps by first lifting the door leaf. When it goes down, the graphite will crumble.
Litol is also used for lubrication. And if we are talking about a door with permanent hinges, it is better to use WD-40 aerosol. These lubricants are available at any auto store.

If you are wondering how to lubricate door hinges to prevent them from squeaking, if you don’t have any of the listed means at hand, then you can get out of the situation with the help of any oil that happens to be in the house. It can be vegetable and butter or margarine. But the effect from using improvised means will not be as long lasting as from using special compounds. Lubricants will also help if the door seal squeaks.

How to properly remove a door from its hinges

If the door squeaks when opening, it needs lubrication. To do this, it is recommended to remove the canvas from its hinges. This process has its own characteristics. First of all, you should determine what type of loops are used in this case. They are divided into:

screw-in;
invisible;
card (removable and non-removable);
mortise

You can find out what type of hinges they are by opening the door. If the structure opens in both directions or 180°, then the hinges are permanent.

The easiest to remove doors are those with removable hinges. The door must be opened, after which it should be lifted using a crowbar until it can be removed. This procedure is not recommended to be performed alone, since the canvas is quite heavy and may fall.
The hinges can be equipped with additional fastening and overhead elements. When working with them, you first need to remove all the parts, and then unscrew the bolt at the top. After this, you can begin dismantling the canvas.
A door with mortise hinges is removed in the same way.
Screw-in elements are equipped with a pin that is inserted into the canvas and the box. Such loops are mainly used for interior doors. Their mechanism is identical to the design of card and mortise elements, so you should work with screw-in hinges in the same way.
Invisible loops differ from other types in a certain advantage. Due to the fact that they are practically invisible, the door structure looks more attractive. But these elements are the most difficult to work with. Their mechanical part is located in a box, which is placed in the door frame. To remove the door, you first need to remove all the fasteners and only then proceed with dismantling.

Door installation procedure

In some cases, in order to eliminate the unpleasant sound, it becomes necessary to dismantle the door along with the frame, fix the problem, and then install it back. Let's take a closer look at the installation method.

This process is carried out using the following tools:

hacksaws;
screwdriver;
hammer drill;
screws;
level;
hammer;
plumb line;
polyurethane foam.

The installation process occurs in the following sequence of actions:

The work begins with installing hinges on the door leaf and frame.
Next, using a level and plumb line, you need to align the door frame in the opening.
Afterwards it should be fixed with wooden wedges.
You must ensure that the hinge box is installed correctly. A level and plumb line are also used for this.
Then holes for the hinges are formed in the rack.
At the next stage, the canvas is installed on the hinges. In this case, you need to ensure that there are no distortions.

Conclusion

Such an unpleasant phenomenon as a creaking door can be caused by several reasons. To effectively eliminate this problem, it is necessary to determine why it occurs. Today there is large selection compositions with which you can get rid of unpleasant sound. If the squeak needs to be removed in a short time, and special oils and aerosols are not available, improvised means will help correct the situation.

Ways to eliminate squeaking are presented in the video:

After a certain amount of time has passed after installing the door, a squeaking sound may appear. This sound is irritating, so you immediately want to get rid of it. There are many proven means and methods for eliminating this problem. In order to do this, it is necessary to identify the main cause of the creaking.

Causes of squeaking

Depending on what kind of door is installed, the reasons for the creaking may be different.

Craftsmen who are faced with door repairs most often identify the following reasons that provoke squeaking:

Incorrect installation. In this case, the hinges may be welded incorrectly, and then to solve the problem it will be necessary to completely replace the door and door frame;
Lack of lubrication. It is possible that after installing the product, its hinges were not lubricated, so you just need to purchase a lubricating solution and fill the hinges with it. It is important to know that the composition should not contain grease - over time, its particles become abrasive, which can also cause squeaking;
No balls. If there are no bearings in the hinge mechanism, the canvas will need to be removed and the hinges disassembled, supplementing them with the necessary parts;
High humidity. Due to constant exposure to moisture, the door may swell, resulting in friction against the door frame, causing creaking. This situation implies complete dismantling old door group and installation of a new one. Before carrying out this process, you need to get rid of the source of moisture so that the problem does not recur;
Wrong choice of cladding. The material may come into contact with the door frame, causing friction and squeaking. In this case, replacement of the cladding material will be required;
Faulty elements. Check all parts of the door and door frame for suitability; perhaps over time, some of them have become faulty and need to be replaced;
The hinges are not securely fastened. You need to change the mounting bolts and check the result;
The side part of the panel may touch the trim and cause squeaks; to eliminate the unpleasant sound, adjust the door;

The owner of the apartment, hearing a creak in the door, immediately gives preference to any available oil-based product. Most often, people use vegetable oil, which is fundamentally wrong. You can and should use oil only when the problem is really related to the hinges.

In this case, you should use machine oil, which is sold in car dealerships. It has an appropriate composition that cleans door hinges and prevents them from clogging, which cannot be said about sunflower oil.

Eliminating the creaking of the front door

The door is wooden, which is installed on landing and leads to the apartment, will always be subject to temperature changes. Such differences can undoubtedly cause the door to squeak.

The difference in temperature inside the apartment and outside is approximately ten degrees, this is especially noticeable in the off-season. It is not possible to eliminate the cause, but you can influence the consequences. In this situation, graphite powder or an ordinary pencil will help.

If the front door was installed recently, and creaking has already appeared, then the reason is that the hinges do not fit tightly to the jamb. Prepare a screwdriver, matches and glue and perform the following operations:

Try tightening the screws in the hinge more tightly using a screwdriver;
If the first option does not help, glue several matches together or take a ready-made chopstick and insert it into the hole, then fix it.

It happens that the loops front door creaking from rust. To eliminate these problems, use molten paraffin.

How to remove the squeak of a plastic door?

Doors of this type are most often installed on a balcony or in office premises. The reasons causing the creaking may be:

Contact with the threshold. The hinges are loose and there is constant friction of the products. Correcting the problem in a timely manner will help avoid the appearance of gaps between the frame and the canvas;
The door touches the frame. Correcting the situation consists of adjusting the fittings;
The door creaks only when opening and closing - complete adjustment of the product is necessary.

A quick solution to the problem of squeaks is to use the same graphite rod, which must be placed under the hinges. However, this is only a short-term solution to the situation; it is better to adjust the hinges. Before performing the procedure, it is recommended to thoroughly lubricate the parts with technical oil. Details about door adjustment.

Other methods for eliminating squeaks

If the above methods do not help, there are other methods to get rid of the unpleasant sound:

Use of aerosol oils. The most popular option today is WD-40, which is used not only for lubricating doors. It is convenient because it has an additional thin nozzle with which you can penetrate the hinge holes.

Spray the solution directly onto the hinge while trying to open and close the door. The squeak should go away instantly;

Repairing the rod. If the sound does not go away, then you should disassemble the loop. The part itself is held on a rod that needs to be pulled out. This device is easy to find - it connects all the hinge plates together.

The rod needs to be wiped well, or better yet, use a metal sponge to remove dirt and blockages. If the part is bent, it needs to be straightened with a hammer.

If rust is found on the rod, use sandpaper to get rid of it. An alternative could be soap, which is used to lubricate the part and install it back into the hinge.

After the manipulations have been completed, install the rod back and apply lubricant.

You can use Vaseline and lubricate the loops with it. Next, you need to open and close the door until the sound completely disappears.
If you don’t have lubricant on hand, you can eliminate the door creaking regular soap. It is necessary to lubricate the hinge rod or the rubbing sides of the doors.

These tips will help eliminate annoying door squeaks. When performing sound removal operations, try not to overdo it with the amount of lubricant.

Video: What to do if the door creaks?

Video: How to remove a door squeak