The device and independent installation of rotary doors. Roto door. A perfect mechanism in the service of a person What is a roto door

Rotary doors

Roto doors are a revolution in indoor space organization that reduces the opening radius of the door and thus increases the free space. During the design phase, door areas are reorganized to increase the available space in the rooms. The door can be opened both towards you and away from you, and it is also easy to close. Double opening direction is ideal solution for emergency doors, as well as for use by people with disabilities. Simultaneous use of the advantages of swing and sliding doors allows you to reduce the occupied volume, which makes access easy even in very small rooms.

Rotary doors is a technology that was based on the goal of creating additional possibilities for interior design by changing the concept of opening doors. As a result, designers have an additional tool that, even at the design stage, offers new alternatives to solve interior space problems, providing new perspectives even in small spaces.

Advantages of the roto-mechanism:
1. Any door presented on the site can be installed with a rotary design *;
2. a unique mechanism that surprises with its functionality;
3. the kit is universal - the door is not right or left according to the type of opening;
4. magnetic lock, providing reliable closing of the door;
5. Roto door mechanism allows you to open the leaf in both directions, which allows you to use it in a narrow space;
6. Roto door is convenient for everyday use, just like a regular door;

* except for doors with embedded fittings, porch and floor-to-ceiling glass

Comparison of roto doors from different manufacturers.

Roto doors Rada
Factory Rada uses rotary mechanisms Morelli Swing, Italy. Rotor system can be equipped with canvases from the factory of the Rada, Lada, Grazia, Medea, Naples, Triumph, Siviliya, Venice, Lilia, Pronto, Siena, Marco (only blind canvases) and Polo series. Roto door set Rada is supplied with all cutoffs.

The cost of the roto-door set Rada without the cost of the leaf from 35610 rub.

Roto doors Profil Doors
The range of doors that are equipped with rotary opening is represented by the Profil Doors Z collection.
Requires custom doorway 13 cm wider than the canvas and 9 cm higher.
The cost of a set of roto-doors Profil Doors without the cost of the leaf from 36525 rub.

Roto doors Status
" Production of Status doors with a cut-out for a roto-mechanism is possible in everything model range except models 222, 331, 322, 332, 422, 423 and the FAVORITE series. Models 221, 226, 211, 311, 312 , 321, 422, 423 optional agreement.
The cost of the Status roto-door kit without the cost of the door leaf from 17500 rub.

Roto doors Dariano
The range of Dariano doors for which rotary execution is possible - Galaxy, Dakota, City-line, Vita, Boston, Milan, Lyon, Monaco, Premiere, Barcelona, ​​Sorento, Riviera, Machaon.
A non-standard doorway is required 13 cm wider than the canvas and 6 cm higher.
The cost of a set of Dariano roto-doors without the cost of the leaf from 33720 rub.

Roto doors Framir, Fineza Puerta and Dolce Porte
The Framir factory uses rotary mechanisms Morelli, Italy. It is possible to order any door of the factory, except for doors except for doors with "glass to the floor". The roto door set Framir, Fineza Puerta and Dolce Porte is supplied with all cutouts.
There are two options - symmetrical and asymmetrical.

Symmetrical (with overhead box)

Asymmetric (with additional timber)

Roto-mechanism Morelli - 1 pc. Roller carriage 8 wheels - 1 pc. Rack mounting box made of plywood 2400 * 80 (or 100) * 16 - 2 pcs. ROTO box (ROTO stand vertical left, right) 2100x80(or 100)x50mm-2pcs Mounting kit Brush seal

Roto-mechanism Morelli - 1 pc. Aluminum guide profile 28*30 mm. - 1 PC. Roller carriage 8 wheels - 1 pc. Rack mounting box made of plywood 2400 * 80 (or 100) * 16 - 1 pc. Plywood mounting box crossbar - 1 pc. ROTO box (ROTO stand vertical left, right) 2100x80(or 100)x50mm - 1 pc Crossbar ROTO 80(or 100)x41mm-1pc. Mounting insert made of plywood 2400 * 42 (or 62) * 9 mm. - 1 PC. Additional timber ROTO 2100x80(or 100)x16mm-1 pc. Mounting kit Magnetic lock Morelli 1895M (Color: Gold, Chrome, Bronze) Brush seal

For the asymmetric version, the doorway is 13 cm wider than the canvas and 10 cm higher.
For a symmetrical version, the doorway is 16 cm wider than the canvas and 10 cm higher.
The cost of the Fineza Puerta roto-door kit without the cost of the leaf from 17115 rub.
.

Comparison of roto-mechanisms from different manufacturers.

Roto-mechanisms Morelli Swing, Italy
high load bearing capacity. The order of mechanisms under doors 210 cm high is possible. The color of the mechanism is black or silver.
The opening for installing a door with a roto-mechanism is standard 10 cm wider than the door leaf and 6 cm higher.
from 30918 rub.

Roto-mechanisms Rezident, China
Low load-bearing capacity, doors recommended no more than 60 cm wide! light weight. Extremely weak arms of the mechanism. It is possible to paint the movement according to RAL.
The opening for installing a door with a Rezident roto-mechanism is non-standard 15 cm wider than the leaf and 10 cm higher.
The cost of a set of roto-mechanism Morelli Swing without the cost of canvas from 14640 rub.

Instructions for installing Roto doors Rezident
Morelli roto door installation instructions

Attention, installation of a rotary door is difficult for untrained installers!

To the standard question, which doors are better for the house, most people will answer without hesitation that they are sliding, as they are largely able to save usable floor space. Only a few familiar with the novelties modern market, will answer this question differently - they will bring to the fore the so-called roto door, which in all its parameters and performance characteristics is many times superior to all its relatives. At least, this is what its developers say, but is it really so, we just have to figure it out in this article, in which, together with the site site, we will study the design of the roto door, the advantages and disadvantages, as well as the technology of its installation.

Roto door photo

Roto door: design features

By and large, the roto door can be safely called a hybrid, which combines not only the principle of operation of sliding, hinged and, but also all their advantages, leaving little room for shortcomings. The culprit of such an alliance is a special mechanism that sets a unique trajectory for the movement of the door in the process of its operation - it simultaneously moves aside and swings open, while making a rotational movement, from where its name came from. Such doors can work in two directions - if we draw analogies, then it can open both towards itself and away from itself, while not occupying usable space on either side.

As you already understood, the whole secret of such doors lies in the unique rotary-sliding roto mechanism for doors, which structurally consists of two parts. Slotted top track, swivel hinge with roller that allows both easy rotation of the door and its movement along the top track. A special lever is mounted at the bottom of the door leaf, connected to the upper mechanism by an axis of rotation, which is built into one of the racks of the door frame - thanks to this lever, a fixed position of the leaf in space is ensured. Simply put, this lever keeps the blade in a strictly vertical position, despite its position in doorway.

Roto door mechanism photo

Yes, the mechanism is complex, which entails an equally difficult installation technology - to make this process a little easier for installers, interior roto doors are delivered assembled. In fact, it remains only to install them in the doorway. Which, on the one hand, is an indisputable advantage - by the way, similar good points roto has a lot of doors. Let's talk about them in a little more detail.

Advantages and disadvantages of swing doors

There are a lot of advantages that a roto door has - it is easier to list their disadvantages, which we will deal with from the very beginning. In addition, it is much easier to determine their real value by the shortcomings of the product. Three main points can be safely attributed to the negative aspects of such doors.

As you can see, these doors have no disadvantages, even if we consider them performance characteristics. If we talk about the merits, then here you can highlight a lot of advantages. Let's get acquainted with the main ones.

1. Their most important advantage is their versatility. They perform well in both large and small spaces. AT open state they protrude from the doorway by less than half their width - in the case of a 600mm leaf, this dimension is only 260mm. Even if the corridor is only 80 cm wide, such doors will not cause any inconvenience. In addition, they open in any direction - both towards themselves and away from themselves. These doors are neither left nor right.
2. A simple installation of a roto door, available for self-implementation - as mentioned above, they are delivered fully assembled, and the master only needs to fix it in the doorway. We'll talk about this in more detail a little later.

In addition to these two main advantages, one can single out such moments as high heat and which is provided by special brush types. Ease of use (such doors are recommended for use in rooms where people with disabilities live) and, of course, unusual way opening, which may seem outlandish to many of your acquaintances.

You can see for yourself all the advantages described above by watching this video clip, which also shows the technology for assembling such doors.

Installation of interior roto doors: subtleties and nuances

As you can see from the video, the roto door assembly technology is a rather complicated process, which is shown in detail here, and it is, in principle, possible for a competent person to reproduce it on their own. Moreover, such products in most cases are supplied in the form of ready-made elements and are supplemented with detailed instructions - it will not be difficult to assemble them. It is much more difficult and important to withstand some of the nuances, which will be discussed further. Special attention it will be necessary to pay attention to the formation, and this must be done at the stage of repair - it should be understood that such high-tech doors are mounted at the final stage of repair. When all other work has already been completed.

The following requirements are put forward for the doorway for such doors.

These requirements entail one need. If the standard purchase of doors is carried out at the end of the repair, then it is better to purchase doors of this type in advance so that an opening can be formed in accordance with them. Alternatively, you can simply have an assembly drawing that shows all required dimensions. Again, this is not very good exit, since already having roto doors available, it will be possible to form the rest of the interior of the room around them.

In general, summing up, we can only say one thing - the question of how to install a roto door, on the one hand, is solved simply, but not very much on the other. Their complex mechanism is to blame for everything, the assembly of which is best entrusted to a professional - you can only prepare the opening yourself. In principle, if the purchased roto door is ready for installation, then it is also not difficult to mount it yourself.

Interior doors have ceased to be an exclusively functional unit. Today they create a special atmosphere in the interior and can even act as main feature. Modern models are able to save space thanks to such an atypical opening system as rotary doors. They are distinguished by fastening and the fact that they do not swing open corny, but turn 180 degrees and literally retract, "enter" the opening.

Rotary doors are not only practical, but also stylish. No wonder designers give preference to them, especially in conditions small apartment or office. Rotary doors open with a slight movement of a free hand, smoothly unfold and free up space for free movement. In the closed state, they are no different from the standard single leaf.

Peculiarities

These doors got their name from the rotational movement that they make. We are used to hinged doors that require at least one free square meter for opening.

Rotary doors have a number of advantages that overshadow the usual models:

• Versatility. Roto doors are suitable for small and spacious rooms, office space where it is important to save free space;
• Stylish and unusual design, which is ideal for modern interior trends: loft, minimalism, hi-tech;
• They save space, because they open into the opening, that is, they are in it at a right angle and in this state occupy the space of both rooms;

• They have sound and heat insulation, like ordinary doors. Although this characteristic is more influenced by the material of the door and the insulation pad laid along the lower edge;
• They are airtight if alkaline insulation is built into the bottom of the canvas;
• Easy to use for adults and children due to the ease of opening and closing;
• Don't be afraid of drafts. A strong air flow will not be able to close the rotary door;
• Safe.

Rotary is the door fastening system, and not the canvas itself.

You can install a similar opening system on a canvas weighing up to 70 kg. This is explained by the fact that the system will quickly fail and the safety of such a design will be called into question. The door, of course, is unlikely to simply fall off, but it can be deformed. Another condition: the door should not be completely glass. The system is ideal for small-sized housing, children's rooms and apartments with narrow corridor where there is a high probability of hitting someone with this door.

Of the minuses, the high cost of installation can be noted: it will cost more than classic hinges, but not more than a sliding design. High price- a temporary phenomenon, experts say. Rotary doors are not yet as popular as swing doors, and people old school frankly afraid of such structures.

The final minus concerns the creation of such interior paintings: make it yourself without special equipment and technology will fail.

Principle of operation

Any wooden door can become rotary if you install it in the opening on the tilt-and-slide mechanism instead of the usual hinges. The opening system of the canvas is simple: it shifts to the side and simultaneously rotates around its axis - into the doorway.

The rotary mechanism consists of a guide with a groove in the upper part door frame and a swivel hinge with a roller, which are responsible for easy opening and closing of the door, its rotation around its axis and movement along the upper rail. A lever is installed at the bottom of the doorway, which is directly connected to the upper element. The lever fixes the door in a vertical open state, which makes the structure safe.

The roto system is unique in that it does not allow the web to sag under its own weight, as is the case with classic hinges.

It is known that the hinges have to be adjusted as the canvas sags, even if it is not made of 100% solid wood.

The following fittings are installed on the roto-door: a turn-and-slide mechanism and a magnetic lock (in the open state, the “tongue” is not visible). Additionally, an insulating tape is laid in the lower part of the canvas for noise, heat and smell insulation. You can also put ordinary “reed” fittings on the roto-door, but this is not necessary, since today there are modern and affordable models.

Kinds

Rotary mechanisms are divided into:

• Mechanical;
• Automatic.

The first is much cheaper than the second, the door is opened by pressing the handle. The automatic design does everything for you: as soon as a person approaches the opening, the door swings open in front of him.

How to install?

Elements of the rotary system are installed at the factory during the production of the leaf itself: technological holes and grooves are created on the door. Manufacturers of roto systems usually give detailed instructions for self-installation of newfangled fittings.

Before installing the structure, you should make sure that it is complete:

• The presence of a door leaf with embedded fittings and grooves for installing an opening system;
• Door frame with roto-mechanism;
• brush insulation;
• Flat platbands.

To finish the opening, an extension may be required: with the help of it, a wall that is too wide is blocked.

You can install rotary doors yourself, but you should take into account important features when assembling:

• Rotary canvases are installed at the final stage of finishing, when the floor is laid and wallpaper is pasted. It is important that the doorway matches the size of the box. The maximum allowable gap is 5 mm;
• The door frame must fit perfectly into the doorway, as even a slight deviation in size can be a problem in correct installation canvases;
• Floors and walls must be level. This should be taken care of even at the stage of rough finishing;
• It is important to pay attention to the thickness (width) of the box - it must fit exactly into the opening and not stick out of it. Otherwise, it will be difficult to install platbands;
• After installing the rotary type door leaf, you need to adjust it: in the upper part of the box there is a screw with a lock that needs to be rotated. Rotation in different directions allows you to adjust the width of the possible gap and the position of the blade in the level.

Today, manufacturers are able to offer customers a huge selection of interior doors. But among this diversity, one model stands out, which has recently been gaining more and more popularity. This is a rotary mechanism door that can take the lead in most people's apartments. And all thanks to its characteristics and design solutions.

What is a roto door?

So what is a revolving door? This is an interior canvas that, when opened, can use half the space occupied by itself. The design allows it to rotate around its own axis, taking a position at the slope of the opening and moving in the opposite direction. This type of door mechanism makes opening easy and the usable space large.

Which rooms are used

The use of doors with a roto-mechanism is possible in any room. But for certain residential buildings, these products are a real find, and in some cases, salvation. Yes, in small apartments constantly experiencing a shortage of usable space. With the standard version of the interior door, people experience significant inconvenience, because it is impossible to place anything near the entrance. And using a rotary blade, you can expand the usable area.

Roto door is used to expand the usable area

An important role is assigned to interior roto-doors in apartments where people with disabilities live.. Due to circumstances, such owners experience great difficulty when it is necessary to open and close the doors behind them when moving from one room to another. But if you install a rotary mechanism, the process will be greatly simplified, and a person will be able to move freely wherever he wants.

In children's bedrooms, where silence must be maintained during the child's sleep, the installation of rotary cloths also plays a positive role. Thanks to the silent operation of the rotor, no one will disturb the rest of the kids.

The device and principle of operation of the mechanism

The composition of the rotary door mechanism includes:

• Swivel joint;
• guide;
• Steel support rod;
• Upper and lower arms;
• Magnetic lock;
• A platform with a carriage placed on it.

Inside the leaf is a steel rod that allows the sash to rotate in any direction. Planks are attached to it, on one of which a carriage is installed. Thanks to this mechanism, the web moves freely for various distances within the guide.

Rotary system device

The lower and upper arms support the leaf and are responsible for the vertical position of the door. Thus, the fittings work to open and close the opening, moving the canvas in different directions leaving him in a strict position. The presence of a special magnetic lock adds convenience. It firmly fixes the sash in the closed position, making the opening securely closed..

Door types

Manufacturers offer two types of roto doors for purchase:

1. Single-field.
2. Bipolar.

Roto doors can be with one leaf or with two

In the first option, there is only one leaf in the opening, on which a rotary mechanism is installed on one side or another. This canvas can open only along one wall. The double-sided version has two doors that can open equally in any direction. When entering the premises, a person has the opportunity to use part of the block or open it completely. In this case, the door will open like a book, which is common for most owners of apartments and houses.

The second indicator is the material from which the door leaf is made:

• Tree;
• glass;

A combination of different materials can also take place.

The most important indicator when choosing a material is weight. The lighter the canvas, the longer the roto-mechanism will last. The best option are lightweight doors made of composite.

Advantages and disadvantages

Like any product, interior canvases with a rotary mechanism have their pros and cons. Among the advantages should be highlighted:

• Fixing the canvas with a magnetic lock;
• Saving free space in the living quarters;
• Ease of use for anyone, including those with disabilities;
• The input side can be any, which means the possibility of opening the sash in both directions;
• Noiselessness;
• Hermetic closure.

The fixation of the sash and the tightness in the closed position allows the use of such interior elements not only as decoration, but also to create beautiful rest rooms with their help. The rotary door opening system is a real find for people with disabilities. Due to circumstances, they are not always able to cope with an ordinary canvas, since its radius of movement is too large. But when using a rotary mechanism, the problem of independent movement from one room to another disappears, since the doors can be opened in any direction and with a smaller amplitude.

Roto doors open in any direction

Among a large number positive points should also be noted in negative sides question. Namely:

• Less durability;
• Use only light sashes;
• The width of the opening must be at least 80 cm.

A large number of small elements that make up the rotary mechanism quickly become unusable compared to conventional hinges. In addition, the device is able to withstand a limited weight. If it is exceeded, then mechanical wear will become incredibly fast and the rotor will not be able to perform its functions.

Mounting

Anyone home master when buying rotary doors, you will be interested in the question of the possibility of installing it yourself. And such blocks can be installed independently, provided that you have a tool and a clear action according to the instructions.

Preparatory work on the doorway

Before installing door block with a rotary mechanism, it is necessary to prepare an opening for future installation. The peculiarity of this operation is that all planes must be strictly vertical, and the width of the passage must not deviate by more than 5 mm. If the doorway does not meet the required indicators, it is necessary to reconstruct it.

The doorway must be level

The correctness of the preparation is constantly regulated by the building level and tape measure. Ideally, you want to achieve a clear rectangle with 90 degree corners. In this case, the installation will be easy, and the quality of the work performed will be as high as possible.

Mounting order

When the opening is completely ready to receive the rotary door, you can start installing the block. To do this, you need to cut the guide exactly to the size of the top bar of the box. This element has a mark showing from which side you can make a reduction in size.

Guide Assembly

After assembly, the mechanism must be lubricated.

Mechanism lubrication

Next, you need to drill holes for the screws. When they are ready, you can fix the guide on the door frame. The block itself is installed using special mounting strips. They are set strictly according to the level, repeating a rectangular opening. This will allow you to accurately position the box, keeping the perfect vertical.

Guide mount

When the installation process is completed, the block is firmly fixed and transferred to the door leaf.

Canvas canopy

It is required to insert a steel support rod into the sash and attach the slats and levers to it. Everything must be fixed with self-tapping screws so that the parts do not have free play except along the guides.

Installation of platbands and overlays

Adjustment

This is no less important process than the installation of the block. For convenience, the mechanism has several adjustment bolts that will allow you to set the canvas in all directions. The task of adjustment is to achieve the ideal door porch.

The door must have equal gaps on all sides

It should have the same gaps along the entire length, as well as from the top bar of the box and the floor.. If the canvas could not be adjusted immediately, then the reason for this may be incorrect installation designs. In this case, there are two options:

1. Reinstall the door block.
2. Find the middle position of the canvas.

The first option is rarely used, so you should use the available adjustment to find a happy medium.

The classic version of the door opening - hinged doors. Despite the many advantages of this method, more and more new ways of closing and opening the valves are still appearing. It is connected with various conditions operation of premises in which the usual option turns out to be extremely inconvenient for one reason or another.

Doors interroom Roto differ in an atypical way of opening.

What it is?

In fact, Roto is a door leaf with a pendulum mechanism. As such, it was used for a long time, but not as an interior door, since it did not provide a snug fit for the sash. Modern models, in particular, from the company Sophia or Framir, successfully solve this problem.

The Roto door system consists of 2 rails that are fixed to the door leaf - most often made of wood or wood material, and to the opening. The device has special rollers that provide sliding displacement of the sash. When opened, the door leaf rotates around its axis and moves towards the jamb. In the photo - Roto sash.

"Purely" pendulum mechanism does not provide such an effect: in this case, the sash only rotates around an axis located in the center of the product or with an offset. However, special systems from Sophia or Framir are rotary-sliding. The door really turns, and then completely adjoins to an end face of an aperture. In this case, the opening turns out to be as open as possible, and the sash does not interfere with movement, as is the case with a swing door with a small area of ​​\u200b\u200bthe room.

Advantages and disadvantages

The Roto door mechanism provides the product with a number of advantages:

• this opening option can be installed on any canvas - made of wood, MDF, PVC, glass, mirrors and so on. Moreover, the system can be strengthened on an already finished product;
• interior Roto sash opens in any direction. There is no need to follow a certain direction, moreover, this allows you to temporarily place large objects on one side of the opening;
• installation of accessories can be done by hand. Mounting is very simple, and the device is equipped with a complete set of mounts;
• the sash when shifted to the ends of the opening, as in the options from the companies Sofia or Framir, occupies only 50% of its width. In addition, you can open it in a free on this moment direction;
• this method of opening, according to reviews, completely solves the problem of sagging of the door leaf;
• The roto leaf fits snugly against the door frame when closing, so that in terms of heat and sound insulation, rotary interior doors are in no way inferior to swing doors;
• the set includes magnetic or mechanical locks that prevent spontaneous opening of the doors.

The products also have disadvantages:

• the cost of such a solution is noticeably higher than the swing version;
• for a canvas with a large weight, this mechanism is not suitable;
• the opening option harmoniously looks in modern styles- high-tech, techno, but not very suitable for rustic and classic style even with proper arrangement.

Product varieties

In fact, there are only 2 types of Roto doors:

• single-leaf - the opening is blocked by one door leaf. Installation of the lock as in the most usual oar shutter is possible. Dimensions are limited by ordinary common sense - it is very inconvenient to move a product with a width of more than 1.2 m anywhere. Maximum weight - 70 kg;

• bivalve - an important difference from other models is the limitation in proportions: the wings can only be the same. In the photo - the door of Sofia Roto.

Roto sash set

The door leaf can be originally intended for installation of this system or be chosen arbitrarily. Only the weight is limited - the fittings will not withstand more than 70 kg.

The mechanism set includes:

• magnetic lock - sometimes there is a mechanical option;
• a box with a built-in rotary device;
• set of platbands;
• guides;
• brush seal - if an interior door was bought.

Roto door installation

The installation scheme of the rotary sash is not much different from the swing installation, so it is easy to do it yourself.

If you believe the reviews, it is even easier to do this, because instead of door hinges guides are fixed here:

1. Prepare the canvas and the doorway: the slopes must be exactly horizontal, as well as the vertical bar.
2. First of all collect door frame, fixed temporarily to the wall. Carefully adjust the position of the frame with wooden blocks. Only after the box has taken the desired position, it is fixed with anchors.
3. They install the guides - it’s difficult to make a mistake here, since the fittings are fixed at the very top and at the very bottom of the box. Therefore, it is important that there is no height difference between the rooms and there is no threshold: the gap between the canvas and the floor is only 3 mm.
4. The door leaf is temporarily fixed on the rails and the position is adjusted. Only having achieved ease of rotation and opening, fix the sash.

On the video, the installation process of the Roto MDF door is presented in detail.