Homemade furniture - cheap and original solution, which can make the interior space of the house more attractive and comfortable. Of course, to design something truly complex, you need the appropriate skills. However, a plywood table is a fairly simple piece of furniture that does not require much time and effort. Having understood the issue, even a novice master will be able to create it.
We'll tell you how to make a table out of plywood with your own hands.
Materials and tools for work
An important stage of work is the preparation stage. Stock up on all the necessary tools and materials, make sure you have a good understanding of the process at all stages.
How to choose plywood for a table 
The main component is, of course, plywood. To create a table, sheets consisting of at least 5 layers of veneer are suitable. The thickness of such panels varies from 16 to 30 mm. The length and width of the plywood are not critical; the choice depends on the size of the tabletop you want to achieve as a result.
Important! About quality plywood sheet can be judged by examining its surface. Samples suitable for such work are smooth, have a uniform color, and do not contain knots, cracks or other defects.
What tools and materials to prepare
For making
As you work, you will need the following.
- Jigsaw or circular saw for cutting plywood.
- Furniture glue.
- Thick cardboard or other similar material for creating life-size templates.
- Pencil and long ruler.
- Fastening elements - bolts, furniture corners or wood screws.
For processing
A separate line is worth highlighting the materials needed at the stage of final processing of table surfaces. This is usually sandpaper or grinding machine for primary processing. AND wax, varnish or paint to finalize a piece of furniture.
Important! Texture natural wood, which is obtained by treating surfaces with transparent varnish, will fit well into interiors in loft, minimalism, and country styles.
However, a strict classical room, as well as ultra-modern high-tech, harmonize better with painted products.
Table drawing
Creating an accurate drawing is the next part of the preparation process. Draw out the tabletop and legs with dimensions on paper. The more complex the shape of the product that is planned to be assembled, the more detailed the diagram should be.
After completing the drawings, transfer the elements depicted on it in real sizes onto cardboard. Cut out the resulting fragments - they will serve as templates for working with plywood.
How to make a table from plywood 
After the tools, materials, drawing, and templates are prepared, it’s time to begin the process of creating the table. To do this, follow the instructions.
Part marking
Take cardboard template, secure it to the plywood board with masking tape and outline it with a pencil. Thus it is necessary to outline all the components of the table, starting with the tabletop and ending with the legs or side stands that replace them.
Cutting out parts 
For this use a jigsaw or circular saw. Triangular, square shape Easier to cut than a curved one. But the latter can also be dealt with using patterns.
Surface treatment
We are talking about grinding elements using sandpaper or another grinding tool.
Important! The joints are subjected to the most careful processing. They must be absolutely smooth so that the parts fit together as well as possible.
Connection of product components 
Mark with a pencil the location of the fasteners. Drill holes in these places using a drill with a diameter slightly smaller than the screws. Then process the top of the resulting holes with a drill with a large diameter - this process is called countersinking.
Then connect all the components. Make sure that the joints are tight - then the table will last a long time. Place caps on the screw heads.
Varnish or paint coating
Varnish will allow you to show off favorably wood texture, paint - add a little color to the interior. Both options have their own advantages.
Important! Interesting solution is painting the legs and table top in different shades.
- The most important thing when designing your own table is to make it fairly stable. To do this, you can additionally connect the vertical legs with horizontal elements, even creating an entire frame.
- Sometimes it is recommended to try to glue together, respecting the proportions, a small mock-up of a future piece of furniture made of paper or cardboard. This is usually enough to understand whether the invented model will hold up or not. You also need to somehow strengthen its supporting elements.
Creating a table with your own hands is somewhat reminiscent of playing with a construction set in childhood. Only the result is significantly more useful and durable.
One of the most budget-friendly tables to make is a table made of plywood. In this article we will step by step analyze the technology of making a table from plywood. Plus, we include photographs of production, a drawing and even video instructions, which you will find at the bottom of the page.
Tools and material for making a plywood table
Tool:
Jigsaw
Screwdriver
Sanding machine
Construction corner
Construction tape (meter)
Pencil or pen
Construction line
Wood drill - 5 mm. diameter
Material:
Sheet of furniture plywood - 152x152 cm.
Masking tape
Furniture bolts
Furniture corners
Wood screws
Plywood table drawing
As for the table drawing, everything is simple. We make: 2 legs measuring 76 cm high, 46 cm wide, a table top measuring 100 cm long, 60 cm wide and a stiffening bar measuring 77 cm long, 52 cm wide.
Making a countertop
To make a tabletop, we need to cut a sheet of plywood in half into two parts. As you remember, we took a sheet of plywood measuring 152x152 cm.
Dividing the sheet in half, we got two rectangles measuring 152x76 cm. Here, one of the squares will go on the tabletop, measure 100 cm in length and 60 cm in width, draw lines with a pencil or pen. 
By the way, many people wonder how to cut plywood without tearing it. We answer this question, if you remember, then in the list of materials we mentioned molar tape. So, take this tape and glue it tightly, then rub it against the line that we drew, look at the photo: 
If you still have questions, you can watch a video on this topic at the bottom of the page. There we show in detail how to prevent plywood from tearing when cutting.
We take a jigsaw and cut along the lines that we drew. Peel off the remaining masking tape from all sawed sides. Now, take a round shape, we took a metal bowl, you can use whatever you like. And we put it on the corners of the tabletop, so that we form a semicircle, that is, we round it sharp corners, something like this: 
We make curves on all four corners and also tape along the lines. Carefully saw off with a jigsaw. 
After sawing and removing the remaining masking tape, you need to take grinder, put a sanding belt with grit size No. 100 on it and sand the rounded corners. 
The tabletop is almost ready, all that remains is to sand down all the unevenness on the surface of the plywood. Taking into account the fact that the plywood is more or less even, it won’t take much time, this is how the tabletop will ultimately look like: 
Let's start making the table stiffener
Stiffening bar or otherwise called lateral stability. It plays the role of a support for the table, thanks to this strip we will fix the legs of the table and the tabletop, thus eliminating the instability and the structure will become stable.
We take the second half of the sheet and mark the rectangle - 77x52 cm. We also cover the lines with tape and cut them with a jigsaw.
As for the pattern of the cross bar, you can watch from the video how to make markings in the shape of a wave. After the markings have been applied and sawed off, you should end up with a table rigidity bar like this: 
Making two table legs
It is difficult to make a plywood table with four legs, so we will make two wide, beautiful and voluminous legs. The remainder of the sheet is just enough for two pieces. We mark two rectangles, each measuring 76x46 cm, where 76 cm is the height of the legs, and 46 cm is the width.
Cover with tape and saw off with a jigsaw. About how to make markup for beautiful shape on the sides of the legs you will also find in the video clip. We got this drawing: 
We cut according to the same pattern. We transfer the finished leg template to the second rectangle, mark it and saw it off again. Now we sand all the blanks, except for the tabletop, and this is the set of finished blanks we got: 
Assembling the table frame
Let's start assembling the frame of the dining table. We take the lateral stability and put marks where the furniture bolts will be tightened. Be careful here, because it is very easy to make a mistake at this step.
Let's get down to business, take the stiffness bar and divide it into three equal parts. If you did according to our instructions, then you should have marks for drilling holes: the first mark is 7 cm, the second is 26.5 cm and the third is 45 cm. The first mark should be made from the top of the plank, where the tabletop lies . 
Take a wood drill with a diameter of 5 mm. and make holes in the ends of the stability bar. The drilling depth should be 5.5-6 cm, since the length of a standard furniture bolt is 5 cm. We transfer the same dimensions that we made on the stiffener bar to the table legs.
We also begin to place marks on top of the legs, where the tabletop will go. Divide the legs in half widthwise from top to bottom, draw a thin line with a pencil and put marks on it at 7 cm, 26.5 cm and 45 cm and make through holes with the same wood drill.
After all the holes are made, take one leg and attach all three furniture bolts. We attach the stability bar and tighten all the bolts with a screwdriver. On the other side we place the second leg and also screw it on.
You will get this table frame: 
Now, take the tabletop and place the table frame on top. We measure the same distance over the entire area of the tabletop and fasten it using furniture corners with wood screws.
Since the thickness of the plywood is 18 mm. Wood screws should be 15 mm. The product is ready, all that remains is to process the table (carry out paint and varnish work), here, if desired, you can paint, stain, varnish the product or in any other way.
Photo of the finished table and video instructions
Photo:
Video instructions:
svoimi-ru4kami.ru
DIY plywood table
What you need to know when working with plywood
- It is important to cut the material correctly. Any cuts are best made using a professional tool - an electric jigsaw for wood. Moreover, you should choose a model with the smallest teeth so that the cutting quality is as good as possible.
- No less important point- strong fastening. To do this, you need to purchase screws designed for wood. In order to prevent cracks in the material, you initially need to make holes a couple of millimeters smaller than the self-tapping screw.
- Additional gluing. To make a plywood table more durable and reliable, its elements are glued together with special wood glue. Before gluing the parts, they need to be prepared (grind the surface and then get rid of dust).
- The elements must be bent correctly. So, if the material needs to be bent, it should be moistened with plenty of water. After this, you need to bend it and leave it for 12 hours to consolidate the result.
DIY plywood desktop
- First you need to make a drawing of the future table. The main dimensions must be marked on it. So, you will know what to start from and make furniture the right size. Below you can see an example of such a drawing. Substitute your own dimensions or use ready-made ones.
- Now you need to cut out all the elements (1 cover, 1 inner wall and 2 end walls), and this must be done carefully, and the ends must be processed immediately.
- You need to drill two holes in each rack as shown in the diagram. It is important to use special furniture ties and a drill for them (as in the next photo).
- Next you need to place the tabletop and attach it using furniture corners. Please note that the screws you use should be a few millimeters smaller than the thickness of the plywood (so they will not be visible).
- The final stage is inspecting the plywood desktop, sanding the ends and gluing tape that will cover the visible areas (it needs to be specially heated with an iron or hairdryer).
DIY plywood dining table
- Prepare all the parts that are in the photo for work. Use sanding to make the surface smooth.
- Take an electric jigsaw and make grooves in the slats, as in the photo below.
- Apply glue to the joints and insert the groove into the groove.
- Assemble the slats and legs using euroscrews as shown in the drawing.
- Now you need to connect the table legs to the binding ring using confirmats and glue.
- The underframe is secured to the tabletop using 35-40 mm self-tapping screws.
- We examine round table from plywood and, if necessary, correct unevenness and other imperfections.
- Finally, we coat the finished furniture with wood varnish.
DIY children's table made of plywood
- Mark where the frame will be. Draw a rectangle, all sides of which will be 5 cm larger than the frame.
- Place the leg where it will later be attached and trace it. You need to do this with all the legs.
- Make sure that the frame does not reach the edge by the width of the table leg plus the 5 cm that we retreated.
- Now the frame bars need to be screwed to the tabletop.
- Screw the legs to the frame itself.
- Sand the plywood children's table until it is smooth and even.
- Finish with wood varnish if desired.
DIY plywood coffee table
Read also: COFFEE TABLE: 40 BEAUTIFUL MODELS IN A MODERN INTERIOR
Dekorin hopes that you will make a plywood table with your own hands, inspired by interesting ideas from this article. See the photo selection below for examples. original tables from plywood.
dekorin.me
DIY plywood table: drawings, video
Surely everyone at school made various crafts or even furniture from plywood. Back then, we often found this activity interesting, but useless. And now the time has come to make something very useful - a do-it-yourself plywood table.
From time immemorial, not a single house can do without this element of furniture. It is used for studying, for work, for cooking and eating, and in many other cases. But the current pricing policy and its relationship with the quality of finished tables leave much to be desired.
What is the way out of this situation? It's very simple: you can make a table out of plywood with your own hands.
Preparing the tools
Let's start by selecting the tools necessary for the job. So, we will need:
- jigsaw;
- screwdriver;
- self-tapping screws;
- glue;
- construction square;
- roulette;
- sandpaper;
- pencil;
- drill;
- furniture plugs;
- plywood.
First let's make it simple universal table made of plywood that can be used anywhere. It will look something like this:
Step-by-step instructions: from cutting parts to assembly
Step 1. Making the lid.
Take a sheet waterproof plywood and using a pencil and tape measure, we measure out the size of the rectangle we need (everyone decides for themselves what size table they need).
When the markings on the sheet are ready, carefully cut out the covers with a jigsaw (or a hand-held circular saw if the plywood is thick). It is better to use a jigsaw file with a fine tooth so that the cut is neat. Afterwards we process the cut edges (and not only the edges), removing any burrs that have arisen in this way. A sanding machine is suitable for this, but if you don’t have one, we’ll make do with regular sandpaper.
Step 2. We make the end walls of the table (aka “legs”) and the inner wall.
Here our actions are not much different from the previous step: we measure, mark, cut and sand the edges.
To make the table even more stable (or the plywood seems not thick enough), you can cut not two, but four leg blanks, which are twisted in pairs during installation. This way we get two thick end walls.
Step 3. Putting the elements together.
The final stage of work is assembly. First of all, it is necessary to connect the end walls with the inner one. The figure above shows exactly where to screw in the screws. We measure with a tape measure and mark these points on our parts with a pencil. Next, drill holes at the marked points with a drill. The diameter of the drill should be slightly smaller than the screws we use. This is done to prevent the plywood sheets from bursting during assembly. Drilled holes countersink under the heads of the screws so that they do not stick out. We screw the screws into the finished holes.
Now we place the table cover on top and align it with the end walls and screw it to them in the manner described above. Then we put furniture plugs on the heads of the screws or putty them.
For greater strength, the parts can not only be twisted into pieces, but also glued together. You can also use furniture corners.
Video guide: making a coffee table with your own hands
Final processing of the product
We will need varnish, paint or self-adhesive film to look like wood. Some details of varnishing the product are described in another article. After this, leave the table for 1.5 - 2 days until completely dry.
You can also use a varnish application method that eliminates brush marks. To do this, move the table to a well-ventilated room with an air temperature of 19-20 C. It is better to choose a brush made of natural bristle with split ends. This brush will allow you to make long strokes.
1. Thin the varnish. Before application, the varnish must be diluted with white spirit in a 1:1 ratio, while stirring slowly. This will help it dry out faster and it will spread better over the surface.
2. Apply the first layer. So, coat the product with a layer of varnish along the grain, without pressing hard on the brush and holding it at a slight angle. After the first coat of varnish has dried (approximately 24 hours), you need to remove any fluff (if any remains). We do this using fine-grained sandpaper 220-230K. After finishing the procedure, wipe the surface with a damp (soaked in white spirit) rag. If there are still brush marks on the surface of the product, carefully sand these areas with fine-grained sandpaper.
3. Apply the second layer, keeping the ratio 3:1 (mix the same as the previous time). Let it dry and sand again using 320K sandpaper.
4. Apply several layers of undiluted varnish. To get the maximum effect, treat the surface with sandpaper (600K) and polish with a felt wheel.
So we finished our debut cutting with a jigsaw and as a result we got a plywood table with our own hands. Usually all this work takes no more than 1 day or even no more than 5 hours (it all depends on the skill of the designer).
Video: how to varnish wood and plywood
Alternative products - transformable table
We have described one of the most simple options plywood table. You can also mount it, for example, not with one inner wall, but with two.
View images various options tables
In addition, there is such a thing as a transforming table. This is a rather interesting category of products that can also be made from plywood, and they are notable for the fact that they can increase their area by 2-3 times.
When not unfolded, the dimensions of the table are small, but after a few efforts it becomes an ordinary dining table.
In conditions small apartment when everyone square meter As a matter of fact, such a plywood table will simply become an indispensable attribute and will fit very well into the interior of your home.
Download manufacturing plans for several transforming tables
The essence of assembling plywood tables comes down to one algorithm: draw - cut - connect (assemble) - process the surface. Everything is extremely simple and clear!
knigastroitelya.ru
50 Stunning Examples of Plywood Furniture
Crafts, Decor, Workshop, Furniture, Cheap, Interior
The fashion for environmentally friendly materials is still at its peak. However, there have been some changes in the ranking of demand for the materials themselves. So, for example, instead of natural wood designers increasingly began to use ordinary plywood. Today they create from plywood furniture, finishing, plumbing and even building facades. Ordinary available material, which was previously treated condescendingly, suddenly found itself at the peak of popularity.
Read also: Modular plywood shelves from J1 Studio
Read also: 40 Simple Sofas You Can Make Yourself
Read also: 25 Superb Coffee Tables
In the era of minimalism, natural motifs and naturalness, plywood could not have come at a better time. More recently, this material was considered faceless, unsightly and too cheap in appearance. When making furniture, plywood was often masked with wood veneer. Only recently have designers finally paid attention to the elegant, unobtrusive pattern inherent in its surface. And today, along with the naked brick walls and not covered with anything concrete floors, in fashion - decoration and furniture made of natural plywood, without decoration or embellishment.
Read also: What can be made from plywood. 24 Master classes
Read also: How to make a simple cabinet from plywood
Read also: Perforated plywood rack
Plywood - ideal option for making furniture. In addition to strength and environmental friendliness, it has such an important quality as ease of cutting and design. Unlike wooden planks plywood boards can be given any shape: broken, rounded. This material does not limit the designer’s imagination, but, on the contrary, stimulates him to bold creative experiments.
LATEST ARTICLES
POPULAR ARTICLES
make-self.net
Selection “Do-it-yourself plywood table - simple and beautiful”
It is furniture that makes living in a home comfortable and cozy. In this article, Dekorin will talk about how to make a table from plywood with your own hands. Of course, you can buy ready-made furniture in the store, but it is unlikely to perfectly match your wishes. You can make a table of the size you need with your own hands and be confident in the quality of the product. In addition, it is always nice to use furniture that you have made yourself.
No one will argue that a hand-made plywood table should not only be pleasing to the eye, but also be reliable and of high quality. To do this, you should adhere to the following recommendations:
By following the above tips, you can make a high-quality table from plywood (as in the following photos).
A work desk is needed in every home, but you don’t have to buy one, because everything can be done with your own hands. By the way, such a plywood table can also be used as a desk. The procedure is as follows:
If you need to do computer desk from plywood with your own hands, then in this design worth turning on additional elements for the system unit, keyboard and printer. It is again very convenient to connect the elements using European screws and special furniture corners. Below you can see the necessary drawings. Dekorin believes that this option is the most optimal if you need to make a computer desk from plywood.
Every home should have a table where the whole family gathers in the evenings and has dinner. And it will be great if the head of the family does dining table from plywood with your own hands. Psychologists say that the most favorable communication is facilitated by the absence of angles. So why not make a round table out of plywood? In addition, by making furniture yourself, you can always choose the ideal size of furniture specifically for your kitchen.
In the process of work, you will need the following materials: wood screws, an electric jigsaw, a drill and a grinding attachment, a confirmation drill, wood varnish, as well as plywood, from which we will actually make the table.
It is important to consider that without sufficient experience it will be problematic to cut out the tabletop and the disc connecting the legs to the table. Therefore, if you are a beginner, it is better to consult a specialist. Show him the drawing in the following photo: you will need two circles (128 cm and 104 cm).
The plywood kitchen table is ready!
Read also: WHICH FOLDING KITCHEN TABLE TO CHOOSE - 67 PHOTO IDEAS
Sooner or later, the child will need his own table for his first developmental activities, creativity and study. It’s good if you make it yourself, because you can make furniture that is suitable in size and height specifically for your child. The usual option - four legs and a table top - is quite suitable for a child's room.
For children's table You will need four pieces of plywood (4x4 cm). They will act as legs. The tabletop can be made like this: cut two smooth boards the desired size, knock them down, and cover them with plywood on top.
To screw the legs to the frame, you need to do the following:
If you want, decorate such a table at your discretion. The child will definitely appreciate it new furniture in your room.
This option coffee table made from plywood is perhaps the simplest, and even a beginner in furniture making can handle it. So, first, cut out a sheet of plywood and four legs from the blocks (all measurements are on the diagrams). On each leg at the very end miter saw make bevels. Next, you need to make holes on all four parts in the same way as in the photo. These elements are similar to each other, but they must be manufactured differently (depending on where they are located). Assemble the furniture in the same way as in the diagram. coffee table made of plywood and blocks is ready!
Plywood is a material that has been unfairly neglected by furniture manufacturers. It is environmentally friendly, has high wear resistance and durability. Despite the low cost, manufacturers continue to give preference to even cheaper, but short-lived chipboard.
Of course, you can order furniture from plywood, but why not make a set from it yourself? Such a new interior will be exclusive, in which you can show all your imagination. In addition, for this you do not need to become a carpenter at all: a minimum of tools and skills will suffice.
How to choose plywood?
The material, extremely easy to work with, seems to encourage creativity and experimentation. Despite its strength, plywood is easy to cut and design. The sheet can be given any desired shape: it bends and will not break.
Plywood is a number of veneer sheets glued together. As a rule, birch or coniferous trees are used, and the inside leaf can be made of coniferous wood, and the outside can be birch. More expensive and high-quality plywood is made from hardwood.
When choosing plywood, pay attention to the following parameters:
- The brand is responsible for the scope of application and moisture resistance. Sheets of the FK, FOF and FKM brands are suitable for furniture. The second option, laminated plywood, is the best, but costs more than the others.
- The variety characterizes appearance surfaces. Measured from IV to I, E is the highest grade. Each side has its own designation.
- Surface treatment. As in the previous case, it is determined for the parties separately. The designation Ш1 means the presence of grinding on one side, Ш2 – on both sides. ШН – surfaces were not polished.
- The formaldehyde content is designated by the letter E with an index from 1 to 3 and characterizes the degree of environmental friendliness.
You also need to pay attention to the quality of gluing of veneer sheets, the quality and type of wood, and the appearance of the sheet. Plywood has an interesting texture and pattern that does not need to be covered with an additional layer of paint. Preference should be given to manufacturers from Russia.
Tools
What tools can a novice carpenter not do without? Plywood does not require complex special equipment. Majority necessary tools everyone has them.
A ruler, compass, tape measure and square are needed to take measurements and draw a drawing.
The choice of cutting tool depends on the thickness of the sheet used. A sheet up to 1.5 mm thick is enough sharp knife, up to 6 mm you need a jigsaw, for the thickest sheets a circular saw is required. You will need a drill to drill the holes.
A chisel, plane, chisel, file and sandpaper are useful for processing parts. The parts are connected using glue, nails and screws. Stock up on tools to work with them.
The choice of accessories depends on what exactly you are going to do. Don’t skimp: high-quality fittings will last longer and won’t let you down at the most inopportune moment.
Stages of work
Making furniture from plywood with your own hands begins with drawing a drawing. You can use ready-made drawings or draw your own. Take measurements of the room, calculate the dimensions of each part. Be extremely careful not to discover the error when it is too late.
Transfer the parts to the prepared sheets. Cut out the blanks with a suitable tool. The parts are sanded, varnished or painted, and carved. If the plywood has an interesting pattern, why not leave it? Show your imagination and don’t be afraid to experiment.
The parts are connected using nails, screws or glue. Pay special attention to the parts that bear the main load.
After the glue has completely dried, check the resulting structure for strength. If the test passes, congratulations: job done!
Ideas
Plywood is suitable for making almost any home furniture: cabinets, tables and chairs, sofas and beds.
During assembly kitchen furniture use moisture-resistant and wear-resistant types of material. Don't forget about ventilation system and other communications: they should be freely accessible, but when not in use, it is better to hide them from view. Pay special attention to mounted and corner cabinets, since they require precise calculations and care during assembly.
Plywood is ideal for creating children's furniture. The environmentally friendly material is safe, and thanks to its wear resistance, it will “endure” the games of the most active and restless child.
For the cabinet, select plywood of sufficient height and length, since you need to use a single sheet. Thickness also plays an important role: the larger it is, the stronger the structure will be. When calculating the parameters of the side walls, take into account the thickness of the doors. The bottom of the bed must be at least 18 mm thick. Timber should be used for the body frame.
Plywood makes a practical and inexpensive set for a summer house.
Despite the simplicity of working with the material, a beginner should not immediately take on a complex project that requires experience. Start with something simple: a table, a chair. The classic first work is considered to be a rocking chair.
It is not recommended to cut plywood across the grain. If the need arises, make several cuts parallel to the future cut - this will avoid cracking. Moisten the surface of the plywood and fix it in the desired position for 10-16 hours: this way you will give it the desired shape.
Thick sheets of plywood (more than 10 mm) should be treated like wood. When working with softwood plywood, use nails and screws in conjunction with washers to avoid damaging the sheet.
At the joints of the parts, holes must be drilled in advance. The same applies to holes for fittings. The parts must be sanded before gluing. The cut area is treated with sandpaper.
During work there will be a lot of dust, so it is better to work in a separate room. If this is not possible, protect the furniture with covers in advance.
If you have never worked with drawings, look for furniture drawings on the Internet. Even if you can’t find a suitable one, you will receive general idea about how to draw it correctly.
Get inspired by photos of plywood furniture. Perhaps some idea will suit your taste?
Photo of plywood furniture
It is furniture that makes living in a home comfortable and cozy. In this article, Dekorin will talk about how to make a table from plywood with your own hands. Of course, you can buy ready-made furniture in the store, but it is unlikely to perfectly match your wishes. You can make a table of the size you need with your own hands and be confident in the quality of the product. In addition, it is always nice to use furniture that you have made yourself.
No one will argue that a hand-made plywood table should not only be pleasing to the eye, but also be reliable and of high quality. To do this, you should adhere to the following recommendations:
By following the above tips, you can make a high-quality table from plywood (as in the following photos).
A work desk is needed in every home, but you don’t have to buy one, because everything can be done with your own hands. By the way, such a plywood table can also be used as a desk. The procedure is as follows:
If you need to make a computer desk from plywood with your own hands, then this design should include additional elements for the system unit, keyboard and printer. It is again very convenient to connect the elements using European screws and special furniture corners. Below you can see the necessary drawings. Dekorin believes that this option is the most optimal if you need to make a computer desk from plywood.
Every home should have a table where the whole family gathers in the evenings and has dinner. And it will be wonderful if the head of the family makes a dining table from plywood with his own hands. Psychologists say that the most favorable communication is facilitated by the absence of angles. So why not make a round table out of plywood? In addition, by making furniture yourself, you can always choose the ideal size of furniture specifically for your kitchen.
In the process of work, you will need the following materials: wood screws, an electric jigsaw, a drill and a grinding attachment, a confirmation drill, wood varnish, as well as plywood, from which we will actually make the table.
It is important to consider that without sufficient experience it will be problematic to cut out the tabletop and the disc connecting the legs to the table. Therefore, if you are a beginner, it is better to consult a specialist. Show him the drawing in the following photo: you will need two circles (128 cm and 104 cm).
The plywood kitchen table is ready!
Wide range of tables
Plywood tables are available at prices starting from 2,300 rubles. More than 60,000 pieces of furniture and interior design. 390+ brands of beautiful and designer furniture.
Warranty for tables
We choose only reliable partners and carefully monitor quality. Plywood tables are covered by a manufacturer's warranty and INMYROOM's own quality control system.
Help in selection
Our designers will select tables for free, taking into account your interior and layout. If necessary, they will offer an alternative replacement from the wide range of INMYROOM.
Fast and high-quality delivery in Moscow
We deliver purchases 7 days a week. Please check with your manager for the exact cost and delivery time in Moscow. Delivery to other regions of the Russian Federation and CIS countries is possible.
Easy returns and exchanges
You can return the tables within 7 calendar days from the date of receipt in Moscow.
Warehousing service
We offer storage in our own warehouse if you have ordered tables from us and the repairs have not yet been completed. Check the rates with the INMYROOM manager.