Do-it-yourself repair of iron doors. Do-it-yourself entrance door repair. What you can fix yourself

Does a rusty door leaf and a constantly jamming lock spoil your mood every time you return home? a cheap Chinese design, and you are ready to do anything just to get rid of the daily assault on your own home.

But don't rush. Most problems with the door leaf, frame and fittings can be fixed on their own. In addition to the restored door and saved money, you will receive joy and satisfaction from your own achievements when looking at the saved structure.

Problems that may arise

First, we carry out diagnostic procedures - we determine the causes and location of the breakdown. Only after this we begin.

Broken lock. Problems with constipation cannot be confused with damage to other parts of the metal structure:

The key is difficult to insert or turn.
When closing the door, it is necessary to press the door so that the bolt fits into the functional hole of the frame.
When slamming, the door is not locked in the closed position by latching the tongue.

There are several reasons for the appearance of breakdown symptoms. Often this is wear and tear. Interior may be damaged due to regular entry of moisture into the hole or attempts to break into the structure.

A warped door. Signs of structural geometry violation:

When moving, the door leaf touches the frame.
To open (close) it requires some effort.
Gaps and cracks appeared between the sash and the frame.

Sagging or distortion of the door occurs due to prolonged use, which has impaired the strength and balance of the connecting fastener. door block- loop. Less commonly, the cause is a manufacturing defect that appears immediately after installing the door. If we talk about interior wooden doors, then the malfunction may be caused by a wooden panel that has become deformed over time: from moisture, dryness, temperature changes.

The appearance of rust. Destruction metal surface appears as unaesthetic dirty yellow or brown spots. The appearance of rust is caused by improper operation: the outer coating does not match the installation site, the use of low-quality finishing materials, etc.
Scuffs and damage to the lining. The door gives guests the first impression of your home. At a minimum, it should be neat and clean. A shabby, scratched door, decorated with dents and deformations, evokes not the most pleasant feelings: both among visitors and owners.

How to fix each problem

If the lock is broken, it can only be repaired if there is minor damage to the mechanism:

Adjustment of crossbars and corresponding holes on the outer lining and body (for crossbar devices).
In other cases, parts may fail locking mechanism. Changing an apartment is not difficult when it comes to cylinder mechanisms: they are easily dismantled, and repairs in most cases come down to replacing the cylinder. Then the restored lock is fixed in its original place.
To remove the cylinder lock cylinder, you must begin dismantling the mechanism from the end of the door.

You will have to tinker longer with constipation of the lever type:

For replacement, it is advisable to select a lock with similarly located fasteners. Otherwise, you cannot avoid drilling new mounting holes.
This also applies to the location of the crossbars: they must match, or new holes will need to be formed in the metal.

Castles more complex structures(crab, digital) it is impossible to repair it yourself, without knowledge and experience. Even a repair team that arrives on call in many cases offers not repair, but replacement of the door block.

If the door is warped, the deformation is often eliminated by adjusting the hinges. They will need to be replaced:

If the weight is too heavy door leaf And insufficient quantities installed connecting fasteners. But removing and completely replacing the hinges is a temporary measure for this type of breakdown. After a few years, the door will sag again under the weight of the steel sheets.
Weakened long-term operation The hinges are easy to change if they are secured with a hinged fastening system. In this case, it is important to select new parts with fixing elements, the holes in which correspond to the failed hinges.

It is sometimes possible to repair or strengthen the hinges without reinstallation. To do this, select a washer that matches the diameter of the pin on which the door is hung. The washer is mounted in only one place - on the pin of the upper connecting fastening. All parts are pre-treated with machine oil or grease.

It is impossible to repair metal doors , when a violation of the geometric parameters of the structure occurred due to shrinkage of the house. Installing new hinges will not help, since the frame of the door block itself - the frame - has become deformed. is possible only in private houses: in some cases the problem is solved with the help of a wedge driven under the door block.
The visually noticeable appearance of rust indicates a violation of the integrity of the protective outer coating and destruction of the metal. Applying varnish or paint will not solve the problem: corrosion will spread underneath.

Restoration of metal doors consists of a set of measures:

On preparatory stage the fittings and insulating elastic seal are dismantled, and the internal coating is protected with film. When making repairs on a hinged door, do not forget to protect the walls and floor with cardboard.
Use a wire brush or drill with an abrasive attachment to remove paint residues and rust stains. Then the surface is leveled and polished with sandpaper: we start with coarse-grained sandpaper and finish with fine sandpaper.
Putty (automotive putty is suitable) is applied to the cleaned and polished area. After it dries, the surface is polished again.
We prime the surface. It is more convenient to do this with aerosol means.
Paint of the desired shade is applied to the dried primer. To ensure that it lies flat, the door is placed in horizontal position. The paint is applied several times: each subsequent one after drying and polishing the previous one.
The final stage is the installation of fittings and seals.

A worn finish is not a reason to change the door structure. You can easily repair metal doors on site , transforming or completely changing the appearance of the canvas:

Cards made of MDF canvas, plywood or wood. The advantage of finishing is that the card is cut to the size of your door and, when finished, is fixed to the metal part of the leaf with self-tapping screws. The lock and handles are first removed, and upon completion of the work, the screws are masked with plugs.
The most resistant to adverse atmospheric conditions are those impregnated with preservative (including fire-fighting) solutions and laminated plywood cards.
Laminate is also used as finishing. But the aesthetic qualities of the material prevail over the operational ones: the coating will not last for a long time, especially if the door faces the street.
A simple “grandmother’s” way of finishing the canvas - using leatherette. It's inexpensive and quick repair iron door. Modern materials and installation methods will give the door leaf a presentable appearance.

A significant drawback of the material is that the integrity is broken even with minor “contact” with sharp and hard objects.

Prevention

Regular service(cleaning, lubrication) of the moving, operated elements of the door block will prevent (or significantly delay) most breakdowns, and therefore repairs iron doors.

It is important to carry out preventive treatment regularly, selecting products for each working mechanism individually.

Metal is a strong thing, but sooner or later everything in this world falls into disrepair. Entrance doors, like no other, are constantly exposed to various loads and the likelihood of failure of one or another unit here is very high. Next, we will walk you through the repair of iron entrance doors step by step. That is, first we’ll talk about the most likely breakdowns, and then you’ll find out how you can fix them yourself.

Diagram of the most common version of an iron door.

Any repair, including repair of metal entrance doors, begins with diagnostics. Believe me, this design is not so complicated that you cannot figure it out. Here is a list of the main breakdowns:

Locks – there are relatively few lock designs; here you need to decide on the type of lock, after which it will become clear whether you can quickly repair it or whether it’s time to call a specialist;
Fittings - this includes handles, lock linings, hinges and a peephole;
Door frame – often metal doors have an all-welded frame. There is nothing special to break there, but there is a problem of distortions and improper fastening;
The door leaf itself - as a rule, for the average person, the repair of a metal entrance door is limited only to the door leaf. There are basically 2 problems here - the first is the loss of a respectable appearance, and the second is the destruction of integrity, in other words, hacking;
Platbands – external cladding doors are quite often subject to mechanical breakdowns, I am glad that the repair of iron or wooden overlay It's quite simple to do.

Not every door breakdown can be fixed with your own hands.

By the way, if you decide to repair some unit, for example, replace the lock cylinder, it would not be superfluous to carry out diagnostics and preventive maintenance of all components of the structure. It is easier to prevent a problem at the initial stage than to frantically search for ways to solve it later.

What can be repaired in iron doors and how

Repair of iron entrance doors directly depends on the location of their installation, so doors in city apartments break down much less often compared to structures that open directly onto the street, but breakages on all doors are approximately the same. Locks are the most common ones to break, so we'll start with them.

Lock repair

In general, there are 5 types of locks - cylinder, leaf, deadbolt, electromechanical and combined. But most often there are cylinder and lever ones. All types of locks are described in detail with photos and videos.

Repair steel doors With cylinder lock considered the simplest and least expensive. In such locks, the cylinder into which the key is directly inserted is removable. Replacing it will not be difficult even for a complete amateur. The general algorithm of actions is something like this:

At the end of the door on the lock plate, opposite the cylinder, you will find a locking screw, there is only one there, so it is impossible to confuse it;
Use a regular Phillips screwdriver to unscrew this screw and pull it out completely;
Next, insert the key into the keyhole and begin to turn it slightly and at the same time try to pull out the cylinder;

Location of the locking screw in the cylinder lock.

As soon as the tongue inside the mechanism “hides” into the cylinder, it will freely come out of the lock;
Now take the broken larva, go to the store with it and buy a similar one. After which all you have to do is insert the new cylinder into the lock and secure it with the locking screw;
But before going to the market, it would be a good idea to understand the types and subtleties of choosing cylinder locks; all this information is available.

You are unlikely to be able to repair a lever or deadbolt lock with your own hands, so here we are only talking about replacing the entire mechanism.

When replacing a lever lock, the handle is removed first.

If the lock has a handle, then it, together with the linings, is removed first. The mounting screws should be looked for on the inside;
Such locks can be embedded from the end of the leaf or installed inside the leaf. In the first case, you just need to unscrew the fixing screws at the top and bottom, after which the lock should come out easily;
If the lock was attached inside the canvas or a crab-type locking mechanism was installed (locking on 4 sides), then to get to the lock you will have to remove the entire internal cover panel. Having gained access to the lock, you unscrew the fixing screws in the same way and change it.

If the lock is inserted from the inside, you will have to completely remove the inner lining.

Some expensive models of lever locks have the ability to recode the lock for a different key. Therefore, if you lose your keys, it is not necessary to change the lock; you can simply recode it for a different set of keys.

Warp door frame

The box can warp for 2 reasons - the first is not enough good fastening with a heavy door leaf, and the second is shrinkage of the house, but it only happens in new buildings. As a rule, the frame warps gradually and if you notice that the doors begin to close poorly and rub against the upper or lower edge of the frame, then you can correct the situation in one of 3 ways:

If there are no obvious deformations of the frame itself, and the doors sag due to gravity, then you need to tighten and adjust the hinges, plus it is advisable to install an additional canopy in order to reduce the load on the existing ones. Methods for adjusting canopies are shown in detail, and regarding the choice hidden loops you can find out;
Old doors can sag due to wear on the hinges; there is no need to cut in anything additional, just adjust or change the existing canopies;
You can correct the deformation of the box by driving in several wedges, but when the box is in place, you will need to additionally fix it by driving 2 - 3 anchors next to the old fasteners. Box mounting technology different types the walls are shown in detail.

A deformed box can be corrected using wedges.

Loss of appearance

If the door leaf is worn out and the appearance leaves much to be desired, then the repair of metal doors will depend on what the door leaf is lined with.

The lowest budget option is painting. During operation, the paint on the metal is scratched and islands of rust appear; the lower sector suffers the most from this. In this case, before painting, it is advisable to completely remove old paint from the canvas.

If you don’t want to clean the entire canvas, then you need to sand at least the affected areas to white metal. There are many cleaning methods, but the easiest way is to buy an attachment with a metal cord brush for a drill or grinder. You can clean the entire door with it in an hour and a half, but fragmentary repairs will take 15–20 minutes.

The easiest and fastest way to clean metal is with a cord brush.

The cleaned canvas should be degreased with some solvent or acetone, after which at least 2 layers of paint are applied. Paint should be used for exterior work; for repairing iron doors, it is better to use so-called hammer paints.

For those for whom conventional coloring is not suitable, there is a whole range alternative options cladding entrance doors:

Leather – genuine leather is used extremely rarely for door upholstery. Budget options are lined with leatherette, and for the elite sector eco-leather is used. In appearance, eco-leather is practically no different from natural leather, but it costs several times less. The “carriage screed” looks best; step-by-step instructions for upholstering doors with leather are shown;

The carriage screed on the entrance doors looks luxurious.

Laminate – metal doors can be sheathed with regular laminate flooring, but when purchasing, you need to pay attention not to the level of abrasion, but to moisture resistance. The disadvantage of this method is that it is not advisable to veneer canvases facing the street with laminate. Step by step instructions There is a laminate covering for the door leaf;
MDF – laminated MDF panels now cost approximately 50% of iron doors; professionals call them MDF cards. This cladding looks luxurious, it is quite easy to change, the only negative is the high price. There are MDF cards for outdoors and indoors; if you mix them up, then in a year you will be repairing the doors again;

MDF cards are now installed on more than half of metal entrance doors.

Natural wood is a good option, but it is expensive. Plus, such wood must be thoroughly impregnated and varnished with high quality, otherwise it will not last long.

Detailed instructions for covering the door leaf with your own hands different materials There is .

The wooden cladding of the entrance doors speaks of the status of the owners.

Platbands on metal entrance doors are rarely installed, because their role is played by the outer part door frame. But if the platbands are still in place, then if they are damaged, this element is completely changed, and the replacement technology is shown.

Also, don’t forget about this important point in the operation of doors as a lubricant for canopies. If you do not lubricate squeaking doors in time, they will break very soon and then you will have serious repairs. Technology and choice of lubricant for door hinges shown .

Conclusion

We do not claim that absolutely any door damage can be repaired with your own hands, for example, if Chinese door opened how tin can, then a complete replacement is needed here. The same options that are described above have been tested many times in practice and work exactly, so you can safely use them.

If you do preventive maintenance in time, then repairs to iron doors will not be needed for a very long time.

The entrance metal door is regularly exposed to the negative effects of atmospheric phenomena, as well as the process of opening and closing. As a result: the door leaf, frame and fittings prematurely lose their appearance and fall out of working condition. There is an urgent need to carry out current repairs entrance metal door.

Regardless of what kind of repairs are planned, you need to remember that the external metal door is designed to be reliable protection from intruders, ensure the safety of warmth and silence in the house. It should also decorate the facade of a private house or the entrance to an apartment.

Main faults of the entrance door

Most often, the following elements of a metal entrance door fail:

A lock is a locking mechanism.
Accessories - handles, hinges, peephole.
Box. A common situation is when the box changes its geometry or simply falls out of the opening.
Door leaf. Loss of original appearance and violation of integrity is a fairly common problem for front door users.
Platbands - decorative element, which is very often subjected to mechanical stress.

Each problem, to one degree or another, occurs due to improper operation. The scorching sun heats the surface of the door leaf, causing it to lose its color, the paint begins to fall off, and the casing begins to burst. Rain, snow and ice also have a very negative impact on the integrity of the structure.

As a rule, repair of metal entrance doors includes the following activities:

lock replacement or repair;
elimination of distortion;
cleaning of corrosion stains on the door leaf;
restoration of worn upholstery;
worn out fittings.

Lock failure

The technological process of repairing and installing locks on metal doors completely depends on the features of their design. The most commonly used and easiest to repair iron doors are lever and cylinder mechanisms.

Replacing the cylinder lock

To begin, unscrew the locking screw, which is located in the strip of the end part of the door leaf. Insert the key into the hole from inside the house, and turning it lightly, remove the lock core. Prepare new components. The basic parameters of the new core must completely coincide with the part that requires replacement.

Insert the new cylinder into the corresponding hole in the door leaf. Secure the core with the locking screw. Check the quality of work.

Replacing the lever lock

Repairing lever locks on a metal entrance door follows almost the same pattern as installing a new cylinder-type lock.

Sections of the article:

Metal is a strong material, but everything in our world is not eternal. The entrance door is subject to constant loads various types, so the probability of breakdown is quite high. Repairs to iron entrance doors may be needed at any time. We will discuss how to do it yourself in this article.

Vulnerabilities of metal entrance doors

Repairing any item should begin with diagnosing the breakdown. Since the design of iron doors is not something incredibly complicated, anyone can figure it out. Most often the following can fail:

Castles There are not so many subtypes of locking mechanisms, so having determined the type, you can immediately say whether it is worth getting involved in the repair yourself or immediately calling professionals;
Fittings, namely handles, lock plates, hinges, peephole;
Door frame. Most often, metal doors have a completely welded frame, so that individual elements cannot break, but the structure may warp or be initially incorrectly fastened;
The door leaf itself. Problems usually lie in appearance, which can deteriorate significantly over time or after a hacking attempt;
Platbands. The exterior finish of the door may be subject to mechanical failure, but repair is fairly easy.

How and what can be repaired in an iron door

The need for repairs depends on where the door is installed. It is not surprising that doors in private houses are more susceptible to failure than in high-rise buildings due to unfavorable external influences. However, the nature of the breakdowns is usually quite similar. Most often locks fail, so we’ll start with them.

Lock repair

There are five types of locking mechanisms. Thus, there are cylinder, lever, crossbar, electromechanical and combination locks. The most popular are lever and cylinder.

The easiest way to repair an iron entrance door is one that has a cylinder lock. Locks of this type have a removable core that can be easily replaced. The procedure is as follows:

At the end of the door there is a lock plate on which a locking screw is located; it must be unscrewed;
Afterwards, you need to insert the key into the hole of the lock and turn it a little, at the same time pulling out the cylinder;
After the tongue inside the lock is hidden in the cylinder, it can be taken out of the door;
You can take out the dismantled secret and go to a store or market in search of a similar one;
After purchasing, insert the new cylinder into the lock and tighten the locking screw.

It seems unlikely that you can repair a lever or deadbolt lock yourself, so you will need to replace the entire mechanism.

The first step, if there is a handle, is to dismantle it, as well as the linings. The fastening elements will be located on the inside of the door. The lock can be installed at the end of the canvas or inside it. The first case dictates the procedure in which you need to unscrew the screws at the top and bottom of the lock, and then pull out the mechanism. If the lock is installed inside the door or a “crab” type locking mechanism is installed, then you will need to remove the door trim. When you reach the lock, remove the mounting screws and replace it with a new one.

Box skew

There are several reasons for the door frame to skew. The box may be poorly secured if the canvas is heavy, or shrinkage may occur at home. The latter can only occur in newly built houses. Most often, the box does not warp instantly, but gradually; when problems are discovered, the situation can be corrected in three ways:

When the box is not deformed, but the canvas has sagged due to its weight, it is necessary to tighten the hinges and adjust them; in addition, it is worth installing an additional hinge, which will reduce the load on the existing ones;
A door installed a long time ago may sag due to wear on the hinges; there is no need to install others additionally; it will be enough to adjust the existing ones;
If the box is deformed, this can be corrected by driving in several wedges. When the box is in place, they will need to be fixed with two or three anchor bolts next to the old mount.

Loss of appearance

Over time, the door wears out and the appearance of the canvas deteriorates significantly. The repair procedure depends on what material the door is lined with.

The easiest and cheapest way to paint a door. During use, the metal of the door leaf is scratched and traces of corrosion appear, especially often at the bottom of the door. Before applying paint, it is recommended to completely remove the old coating layer.

However, if you do not want to completely treat the door, then you should clean the affected areas down to visible metal. There are several ways to do the job, but the easiest way is to purchase a special attachment for a drill or grinder. You can clean the entire door in an hour, an hour and a half, and a separate section in 15-20 minutes.

After cleaning, it is necessary to degrease the surface using a solvent or acetone. Further painting of the door is done in at least two layers. It is required to use paint for exterior use; it is recommended to use hammer paint.

If the painting option does not suit you, there are many worthy alternatives for finishing the front door:

Use of leather. Usage natural material does not occur often. If the door is budget, then dermantin is usually used. In the premium segment, eco-leather is used. Its appearance is almost indistinguishable from genuine leather, and the cost is much lower. The most attractive finishing option is the “carriage screed”.

Application of laminate. The door can also be finished with laminate flooring, just pay attention to moisture resistance and not abrasion. The disadvantage of this option is that it should not be used for street doors.

Decoration using MDF. Laminated MDF panels are installed on almost half of the entrance doors; in the slang of professionals they are called MDF cards. The appearance of such a finish is attractive, it is quite simple to install or replace it, but it is expensive. There are panels for both apartment doors and street doors - it is recommended not to mix them up, otherwise repairs will be required again in the foreseeable future.

Natural wood. An excellent solution that has high price. In addition, wood needs high-quality impregnation and varnishing, otherwise its service life will be short.

The use of platbands on metal entrance doors is rare; their function is performed by the outer part door frame.

When operating the door, do not forget to lubricate the hinges. If a squeak appears, it is recommended to immediately lubricate these fittings so that they do not fail and require expensive repairs.

- this is exactly the element that constantly turns out to be negative impact environment. Accordingly, over time it may fail. Ultimately, various types of damage to the canvas, crust, loss of appearance and performance may occur. In this case, there is an urgent need for repairs. But how to repair a metal entrance door with your own hands? Next we will look at the main problems arising with this structural element and options for their solution.

Regardless of the type repair work that are planned to be carried out, do not forget about what the front door is intended for. And this:

Providing protection from intruders.
Performing decorative functions.
And of course, creating a cozy atmosphere, as well as maintaining heat inside the room.

Main faults of the entrance door

Considering the most common problems that arise, it should be noted:

Lock failure
Failure additional fittings, in particular, door handles, loops, etc.
Damage to the door leaf and loss of appearance.
Failure of platbands, which are most often exposed to impact.

Each of the emerging problems requires prompt work. The breakdowns themselves are mostly caused by improper operation. Moreover, the impact weather conditions has a negative impact, for example, color fades under the scorching sun, or cold, snow and rain damage the structure.

Directly repairing a metal entrance door with your own hands involves the following activities:

Replacement of the locking mechanism and the lock as a whole.
Elimination of distortions.
Getting rid of corrosion and replacing damaged areas.
Restoration of sheathing and replacement of fittings

Let's consider each of the problems separately.

Breakage of the locking mechanism

The process of repairing and replacing the lock itself depends directly on characteristic features certain type doors and the design of the mechanism itself. The most common option are cylinder and lever locking mechanisms, which are quite easy to repair. Let us consider in more detail the replacement of each of the two types.

Cylinder lock and its replacement

Work with such a mechanism is carried out as follows:

The first step is to unscrew the locking screw. It is located on the mechanism bar located in the end part.
After that, insert the key and pull out the core of the locking mechanism with a slight turn.
Afterwards, the components that will be installed are prepared.
We insert a new core in the same way and secure it with a locking screw, after which you should check the quality of the work done.

Note that the characteristics of the new element must completely coincide with the old one, otherwise the replacement will not be possible.

Level castle

Repair work on a lock of this type is carried out on approximately the same principle as in the previous version.

Move the bolts completely, to put it a little easier, open the lock, and then remove the key.
Next, you need to unscrew the fastener at the end of the door. Usually these are several screws.
Then we pull out the mechanism.
We install new components.
Then we insert the lock body into place and secure it with self-tapping screws.
We check the functionality of the mechanism.

Note that in some cases, a full replacement of the lock is not necessary, since manufacturers somewhat simplify the process by introducing recoding technologies. Those. changing the position of the levers, which allows you to change the keys without changing the mechanism.

Door frame distortion and how to deal with it

When a door frame is skewed, it is difficult not to pay attention to the problem, since it is clearly expressed, both visually and visually. mechanical action doors. In particular, the insulating qualities deteriorate, the door does not close well and does not fit tightly to the frame, and also catches the threshold. Let's look at the reasons and ways to eliminate this problem in a little more detail:

The first reason is the heavy weight of the canvas. It is the massive sash that in most cases becomes the main cause of misalignment. If the problem was noticed at the initial stage, then repairing a metal entrance door with your own hands will involve adjusting the fittings, in particular you will need to tighten the hinges and fix them. When elements lose their shape and qualities, they must be replaced.
Another problem is the wear of the hinges. It occurs with prolonged use door designs. In this case, if the hinges are fixed and not welded, they must be replaced. Directly new hinges should be stronger and of higher quality.
AND last option the box becomes deformed, which can be solved by installing spacers under the base.

In some cases, the deformation itself is absent, but closing the door is still very difficult. This sign symbolizes that the seal needs to be replaced.

Corrosive changes

If the doors cannot be painted, then over time spots of rust and a kind of rot will appear. Basically, it is initially subject to corrosion. bottom part doors. In this case, the door frame repair will be carried out as follows:

Repairing a metal entrance door with your own hands when the cladding is worn out

Before starting repair work, you should thoroughly examine the surface and determine the rationality and feasibility of carrying out this type of repair. In some cases, a full replacement facing material somewhat more profitable than repairing the old one.

So, let's look at the most common methods of cladding and its repair.

Painting

This option becomes the simplest and most economical. Considering this method globally, we can say that it is extremely rarely used today. The loss of popularity of this type of decoration is due to the many more inexpensive and interesting options finishes that have become available thanks to modern technology.

Faux leather

This option is also quite inexpensive. Leather finishing is done quite quickly, which is becoming a popular way to beautifully decorate your door. Due to mass color solutions, presented on the market, this option is in the greatest demand.

Among the advantages of this type of cladding, it is worth noting the additional improvement in insulating characteristics, i.e. protection from heat loss, moisture, noise.

Speaking about the disadvantages, it is necessary to mention the fragility of the coating and low strength. Therefore, if pets live in the house, then this coating will not last long.

Laminate

Talking about this method, we can say that its use will ensure maximum strength, beauty and durability of the coating. At the same time, such doors are easy to clean, do not get particularly dirty, and are generally easy to maintain and use. In addition, such cladding will complement almost any interior well. Among the disadvantages, only the high cost of the work should be noted. Compared to other types and types of cladding, it is quite high.

Powder coating

Speaking about such a coating, we should immediately say about its durability, and in addition good characteristics strength. This type of cladding is extremely resistant to damage and corrosion. But we note that you won’t be able to apply this coating yourself at home. Restoration and repair of doors can only be carried out in specialized workshops.

MDF panels

It is also a fairly expensive cladding method. At the same time, the high cost is easily compensated by the resulting quality. As a result, we get beautiful door with high strength characteristics, long service life and ease of maintenance. You will be satisfied with the result of the covering.

Natural wood

This type finishing material, is not used so often, since it is also not cheap. At the same time, he is able to create a work of art even from the most dull door configuration. Thus, the door finished natural wood, will become the property and pride of the owner.

Creaking door structure

And the last problem that you can repair yourself is the occurrence of a squeak, which should be eliminated. This is done as follows:

First of all, you should lift the door a little.
Next, you need to lubricate the hinges; for this, machine oil is most often used.
The last step is to distribute the lubricant along the hinges, which is done by opening and closing the door.

Conclusion

Thus, before you start repairing a metal entrance door with your own hands, you must first weigh your strengths. If, nevertheless, you can repair the lock yourself, then you need to be patient. Only in this case will there be a result. In addition, we offer you video material where you can find comprehensive information about production.