How to remove a round door handle. Instructions for disassembling the door handle of an interior door How to remove a round door handle with a latch

The door handle is used several times a day, which leads to the need for repair of the device or complete replacement. The first stage of the work is to disassemble the handle and find out the causes of the breakdown. How to disassemble the interior door handle yourself, read on.

Main types of handles for interior doors

The following types of handles can be installed on an interior door:

stationary. The handle does not have any latch elements and serves solely to close or open the door. Stationary handles can be installed on one or both sides of the door;

push. When the door handle is pressed, the latch mechanism is pulled into the handle, allowing it to open. If the handle is located in a horizontal direction, then the door is closed and fixed in the selected position;

rotary. The locking latch is activated by turning the handle. For maximum user convenience, rotary handles are made in a round shape. Round pens are also called knob pens.

Push and turn handles can additionally be equipped with key-operated locks.

Disassembling handles

When is it necessary to disassemble the handle?

Self-disassembly of the handle may be required:

when the latch mechanism creaks or jams. In this situation, it is enough to lubricate all working elements. For lubrication, machine oil or a special mixture of WD-40 is used;
if the device is inoperable due to a long period of use or lack of careful treatment and periodic maintenance. All door handles require regular inspection and timely lubrication of moving elements, which increases the service life of the product;
for routine maintenance, for example, replacing a latch or tightening the fastening bolts that secure the device to the door leaf;
to replace the handle with a newer or more advanced model. New models are constantly appearing on sale, which can serve as a piece of furniture or have a greater degree of protection.

How to disassemble an interior handle for repair or replacement? To do this, you need to read the following instructions, which were developed by experts for the most popular types of pens.

Replacing stationary handles

To replace the stationary handle, you need to unscrew the fixing screws, which can be located:

on the front of the handle;
under the decorative trim.

To remove the decorative trim, just carefully pick it up on one side with a sharp tool.

Disassembling the rotary knobs

To disassemble the round handle, you need to prepare:

special wrench to loosen the locking pin. The key comes complete with a handle. If the special device is lost, you can use any hex key that fits the diameter;
screwdriver

The handle is disassembled as follows:

On the decorative trim you need to find a hole for a hex key. It is most often located below or on the side;
The key is inserted into the hole and pressed lightly. In this way, the locking pin is loosened;
The other hand removes the handle. To do this, just pull the device towards you;

at the next stage, the decorative trim covering the hole in the door leaf is removed;
Under the cover there are mounting bolts that need to be loosened using a screwdriver. After performing this operation, the door handle splits into two parts.

If you need to replace the rotary knob, you will also need to remove the latch. To do this, simply unscrew the fastening screws located on the end part and fixing the corresponding mechanism.

Removing the latch mechanism

The process of self-disassembling the rotary knob is presented in the video.

Disassembling lever handles

To disassemble the handle with a pressure mechanism, you will need a screwdriver that is most suitable for the mounting bolts.

The disassembly process is carried out according to the following scheme:

The first step is to remove the decorative trim. The cover can be attached in two ways:
- using thread. To remove the element, you need to turn the cover several times counterclockwise;
- using a locking tab. To remove the cover, you will need to move the tongue slightly in any direction with a sharp tool;

If, due to contamination or damage, the cover does not come off, you can use a screwdriver and a hammer. A screwdriver is inserted between the trim and the door. Hitting the screwdriver handle with a hammer allows you to move the mechanism and unscrew it completely.

The locking mechanism of the push handle is removed in the same way as handles with a rotary system.

After familiarizing yourself with the proposed diagrams for disassembling door handles, you can repair or replace the device without the help of a specialist. To install the handle, you can follow the instructions included with the new device or perform all the steps indicated in the diagrams in reverse order.

The door handle becomes an important element in the design of the door block. With its help, the traditional way of opening/closing the door is carried out. The handle is used intensively and, to a greater extent than other fittings, is subjected to extreme loads. As a result, its mechanical part suffers, its appearance acquires signs of wear and loses its attractiveness. Over time, the need for repairs arises. But often there is nothing left to do but change the door handle.

Different models differ in appearance, method of operation, and method of attachment to the door leaf. In some situations, it is not always possible to figure out on your own how to remove the handle without damaging it.

When is it necessary to remove the handle?

The need to remove the handle arises when the appearance cannot be restored or you need to get to the mechanical part. This part is also removed to repair the lock.

Malfunction of the foot or knob (sagging, loosening), breakage of the lock. To remove a mortise-type door lock, you must remove the handle. The mechanical part that returns the push or turn handles to their original position after pressing the lever or turning the knob is located under the decorative strip. To diagnose the cause of the breakdown and find out how to repair the handle, a number of manipulations are performed. These include: disassembling the part, inspecting the spring, retaining ring, and travel stop. Often lever models made of silumin break off from an accidental blow. In this case, dismantle the remaining fastenings.

Push type model device

Replacing an old model with a more modern one. Sometimes the device is working properly, but looks unattractive in appearance and spoils the impression of the door unit.
Wear of decorative coating. Expensive brass models can be easily restored, but a cheap product with a peeling coating cannot be restored.

How to remove different types of handles?

To determine how to remove a door handle, you need to find out what type a particular model is. Each type has its own installation and dismantling principles.

Stationary models

Usually made in the form of a ball (knob), staple. The models are attached to the door leaf with ties and self-tapping screws, and the latch or lock is not connected to the handle. Stationary models serve as a handle that opens the door.

Removal of the bracket/knob is necessary in case of damage to the appearance of the handle or loosening of the attachment of the pressure lever to the decorative strip or socket.

Round with rosette

The round knob, unlike the rotary model with a latch, is made of solid material and is solid. The typical method of attaching such models is to one central tie using threaded screws. Removing the round handle is simple: holding the knob on one side of the door leaf with your hand, twist the knob on the other.

Stationary round model with socket

The knob is attached to the central axial element not with a thread, but with a side screw. In such models, there is a hole on the side of the knob at the base where the head of the screw can be seen. Instead of a screw, there is also a latch; it is pressed, removing the round door handle from the rod.

The one-sided knob is attached to the socket. If there are no visible fasteners in the socket, it means that it is covered with a decorative cover. To remove it, first try to twist it counterclockwise. Usually the cover is unscrewed in 2-3 turns. If the cover cannot be removed using the specified method, it means that it is attached to the mounting strip using the snap-on method. The plate is carefully pryed off with a screwdriver and removed, opening access to the fastening screws.

Bracket

Bracket models are installed on heavy entrance doors. The bracket is often found on a bar; there are also models with ties. The latter include popular handles for plastic doors, often found in office spaces. The fastening screws in models on the bar are often not hidden by a decorative trim, so figuring out how to remove them is not difficult.

Important! There are exclusive models sold individually, since they are installed on one side of the door leaf. There are no mounting holes on the outside, since the bracket is screwed onto the back side of the door leaf.

Handle bracket

It is more difficult for an inexperienced craftsman to understand an office handle bracket, since it will not be possible to immediately figure out the method of fastening. It is held in place by a clamping nut located on the base. To unscrew it, you will first need to find the hole for the rod. It is convenient to use a thin hex key and a small screwdriver. The rod is inserted into the hole, the nut is unscrewed, and the bracket is removed.

Push model

The L-shaped halyard handle is becoming a popular model that is installed on interior doors. To dismantle a door handle of this type, you will need a thin Phillips and flat-head screwdriver.

Foley handle

For push handles, there are two types of devices: on the bar and on the socket. Each type has its own mounting features:

Models with a rosette are available in two types: with and without a decorative overlay. Handles without lining are equipped with open fastenings, so you can start unscrewing right away. In models with an overlay, the lever with the mounting strip is additionally held on the rotating square by side screws; the holes for them are located on the side of the base of the bracket. After twisting the decorative trim, the mounting screws are exposed.
Models on the bar are removed using the same principle. When the fastening is open, the screws are unscrewed immediately. The decorative trim is held in place by a snap, so it can be removed by prying it off with a screwdriver.

Important! Decorative strips are made of thin metal. To remove it without bending it, carefully inspect it and find a small hole on the side through which it can be pryed.

Rotary

Hollow knobs, sold complete with a latch, are mounted on a large-diameter rosette with a decorative strip. Despite the complexity of the design, disassembling such models is simple.

To disassemble a door handle with a built-in latch, you must perform the following steps:

Remove the knob;
Remove the trim;
Unscrew the tie screws.

To remove the knob, find the hole on the side of the base through which the latch is pressed out. To press down, use a thin metal object (knitting needle, nail). Press the locking pin and pull the knob towards you.

Pressing out the fixing element on the knobset

Important! After successful disassembly, the handle must be reinstalled correctly. When reinstalling, make sure that the fixing pin fits into the socket (you can hear a characteristic click). To do this, the knob is rotated around its axis. Otherwise, if you open it suddenly, it may remain in your hands.

The decorative strip is attached with threads or snap-on clips. It has a hole for prying. Having removed the bar, all that remains is to unscrew the screws on the ties.

Video on how to disassemble the round handle on a socket:

Removing any handle from a door yourself is not difficult if you correctly determine the method of its fastening.

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your...

New articles

New comments

Artem

Grade

Elena

Grade

nezabudka-1

Grade

Catherine

Grade

Vladimir

Grade

Latest reviews

adminadmin

Grade

The procedure for disassembling door handles is simple and does not require calling a specialist. Before you remove the door handle yourself, you need to determine the type of mechanism, and then read the simple instructions.

Common types of door handles

Handles are the most popular element for equipping external and interior doors. Global manufacturers offer a colossal variety of fittings of all sizes and configurations, which are united only by the type of fasteners and locks.

Main types of products:

stationary;
round with rosette;
push;
round knob handles;
with magnetic lock.

Reasons for dismantling door mechanisms

Door handles are exposed to mechanical stress every day. Therefore, despite the strength promised by manufacturers, the fittings quickly fail and need to be dismantled for subsequent replacement.

Various situations can lead to this need:

Breakdown - often under the most unforeseen circumstances, when the lock or outside handle of the front door accidentally jams.
Renovation – when radically changing the interior, door fittings are very noticeable.
Loss of appearance - the presence of scratches, abrasions and peeling coatings spoil the appearance of the room as a whole.

Detailed description and disassembly guide

It doesn't take long to learn how to disassemble a door handle. This simple procedure can be done independently. The specifics of the process depend on the type of structure.

Stationary handles

They are strips of various configurations: round, square, in the form of figures or staples. They are united by simple fastening to the door leaf using screws.

Fixed handles are sometimes mounted on both sides of the door on a single rod. This can be easily checked by fixing the fittings on one side and turning the second piece on the other. The handle on the reverse side should turn.

To know how to disassemble a door handle mounted on self-tapping screws, no special knowledge is required. All you need is:

Using a screwdriver, unscrew the screws from the very base of the handle or from the bar on which it is held (depending on the type of fittings).
Carefully remove the handle.

If the handle is mounted on a single axial rod:

Carefully unscrew the piece of hardware on one side of the door.
Then remove the structure from the reverse side.

Round door handle with rosette

The main feature of such handles is a rotating decorative element and the absence of holes for a screwdriver or key. You need to dismantle such a round handle, starting with removing the top element of the decoration.

The procedure requires attention and caution: the elements of the mechanism are often fragile and can easily burst.

The parsing process is quite simple:

Decorative elements need to be separated. To do this, you need to hold the base of the handle.
Rotate the top and carefully remove the socket from the thread.
Now you can see the opened elements of the mechanism inside the handle and begin to remove them.

Often such door mechanisms are mounted on a regular common rod, which can be easily removed, and the handle can be removed.

Lever handle

A common model, it is easy to install and easy to use. Suitable for all types of doors from internal to external. Contains two fittings that are fixed on a single axial rod. It is accompanied by a mechanical lock with a tongue that latches when the door is closed. Pressing the door opening handle activates the lock mechanism.

When disassembling the mechanism, you should memorize the process so that you can quickly assemble all the elements in the reverse order.

It’s not difficult to figure out how to remove the handle from the door:

Unscrew the screws holding the cover with a screwdriver. Remove the cover part.
A standard tetrahedral axle element will open. In some configurations, the axle is connected to the hardware by a rod that can be easily removed.
Unscrew the remaining part of the handle.
Remove the trim from the second fragment on the back side of the door.
Carefully remove the second fragment.

Knob handle

Knob handle is a common type of hardware, installed on interior doors and is a round lever with a lock in the center. Such mechanisms are installed on interior doors or in bathrooms. The main feature is the movable part of the spherical shape. It consists of two mirrored elements, one of which is opened with a key, the second has a locking button.

To disassemble a door knob, you will need a flathead and Phillips screwdriver, depending on the type of fastening.

The parsing process looks like this:

The first thing to do is pry off the edge of the trim that surrounds the door handle with a flat-head screwdriver.
Use a key or any thin object to press the opened stopper. At the same time, pull the handle slightly, then carefully pull it out and leave it dangling.
In the empty connector that appears, in place of the handle, unscrew several opened screws, after which you can remove both parts of the fittings.
Now you can unscrew the screws that hold the door lock in place. The door handle has been completely removed.

Lever handle with magnetic lock

A simple magnetic lock is called passive, consists of mechanical elements and is used in interior doors. The design is completely recessed into the canvas and is silent in use. This lock is perfect for bedrooms and children's rooms.

The mechanism is reliable and durable, but sooner or later it can fail and require dismantling. The force of the magnet can jam or warp the latch from time or prolonged rough use.

To dismantle a handle with a magnetic lock, you will need the smallest hexagon, a flat or Phillips screwdriver and a sharp thin object.

The process is not much different from disassembling a regular door handle:

The bar around the movable part of the handle is fixed. In its lower part there is a small hexagon connector, with which the base should be unscrewed and left to sag.
In the moving part of the handle there is usually a second connector with a small thread. Using a hexagon, unscrew the handle and remove it.
A single rod axis will open, to which the second part of the hardware is attached on the back side of the door. Repeat the same manipulations with the second door handle.
The main mount is held on by bolts that must be removed. After which the fittings can be easily removed.
After removing the handles, the magnetic lock is easily unscrewed from the end of the door with a screwdriver and removed.

A magnetic pen may look a little unusual. In this case, you need to follow the same principle: find the screws and unscrew them.

The dismantling process (using the example of a push handle) can be seen more clearly in the video.

Today there are a huge number of different types of door handles. All of them are quite reliable, but sometimes they still have to be replaced or repaired. However, a problem arises here - not everyone knows how to disassemble This is the most necessary element of furniture in everyday life.

How to properly remove a door handle installed on an interior door yourself? Read about it below.

Reasons for dismantling

In most cases, it is necessary to disassemble the handle if:

she got loose;
fell into disrepair;
the lock itself needs to be replaced.

In the first case, there is usually no need to remove it. It is enough to simply tighten the screws holding it, or replace them with thicker ones (if the wood is worn out).

Unfortunately, budget versions of handles, in principle, cannot last long, and besides, they are made completely unsuitable for repair. The coating on them is usually quite unstable and will quickly peel off during use. Therefore, when they fail, they are simply replaced with a new one.

Often, during renovations, owners decide to replace old handles with new ones that are more suitable for the design being created or simply look more modern.

When buying a new kit, try to choose those that are made of good metal with a minimum number of components. Reliable pressure models, for example, should be equipped with bearings - they can serve you for several decades. By the way, quality is very easy to determine: the heavier the fittings, the higher it is.

The most common types of door handles

Most often, the following three types of handles are installed on interior doors:

stationary;
nobs (round);
push.

The latter variety is considered universal, since it can be equally often seen on both entrance and interior doors. This mechanism in its normal position has an extended locking tongue, and when it becomes necessary to enter the room, the handle is pressed and it leaves the grooves. In this case, a lock is usually cut into the canvas, protected by special pads. In order not to damage the latter, disassembly must be carried out as carefully as possible.

In our country, a round handle equipped with a latch is used only on interior doors. Abroad (for example, in the USA) they are often placed on input. It has a key hole on the outside and a locking button on the inside.

Stationary models are installed mainly on swing doors. This design is convenient, but not very functional. In essence, it is an oblong bar on which a U-shaped bracket is attached. In the simplest versions, no locking mechanisms are provided - the door is closed with a separate bolt. More advanced models also have a roller latch, installed independently.

Prepare the following tools for dismantling:

flat and Phillips screwdrivers;
thrust wrench (included with the product).

If the model is without bolts (that is, with hidden fastenings), then you need to act in this order:

Using a flat screwdriver (being careful not to damage the decorative coating of the door), unclip the trim located at the base;
Unscrew the screws hidden under it;
use a stop wrench to press directly on the stopper;
remove the handle by carefully pulling it towards you;
After dismantling, unscrew the screws holding the locking mechanism.

In simpler round models, disassembly is much easier - just unscrew the two long bolts located on the back side on either side of the latch.

In this case, you just need to unscrew the self-tapping screws or screws securing the strip to the door leaf.

Here it is worth understanding that replacing this type of handle must be done with a similar one in size. Otherwise, traces from self-tapping screws will not be hidden. They are especially visible on varnished surfaces.

Individual models are connected with bolts through the door - this method of fastening is convenient for both the manufacturer and the consumer. In this case, you just need to unscrew them from the back and both handles will be removed.

Lever handle

All that is required is to remove the trim (in most models it is connected to the handle). In simpler versions, you just need to unscrew two screws from the door leaf.

In advanced ones, all fasteners are hidden behind a decorative cap - it either snaps off or is screwed onto a thread. By removing it, you will have access to 3-4 screws that need to be unscrewed with a screwdriver. Don't forget to also remove the clamping screw mounted directly on the handle - it secures the square pivot rod. After this, disassembly can be considered complete.

Assembly nuances

Before placing the handle in its intended place, secure the locking mechanism - turn its oblique surface in the direction of closing the door.

It is important to tighten all screws and screws as tightly as possible - the better you do this, the longer they will not come loose.

After assembly, check how the mechanism works - the latch should fit freely into the groove and ensure reliable fixation.

There are two types of broken interior door handles. Most often, when you press the handle, it simply scrolls, the door latch does not react to movement and the door does not open. Less often, the spring inside breaks, the handle sags lifelessly and no longer returns to the horizontal position.

Whichever option you encounter, to solve the problem, the door handle must first be disassembled and removed. The sequence of work depends on the design and features of the device of a particular model. Therefore, before we begin describing the technology for removing and disassembling the handle, let's look at what parts it consists of.

Door handle design

The photo below shows the design of the simplest door handle.

The first is the handle itself (in our case, a push handle). A plastic ring is attached to it, which ensures a tight fit of the handle to the base. It is also called a “rosette”, decorative flange or strip. There is a return spring inside it, which guarantees the stability of the horizontal position of the handle.

The next two elements are the travel stop and the locking ring. Their task is to prevent the handle from scrolling further than the required trajectory. All these components are sequentially located on the rod (Square in the image) and secured with a locking screw. The rod, in turn, is inserted into the locking mechanism and drives the latch.

The next photo shows the disassembled handle on the socket with a slightly more complex design of some parts.

Having understood the names and purposes of each of the elements, let’s move on to the sequence of removing the handle from the door and disassembling it.

Step-by-step instructions for performing the work

First of all, remove the handle (indicated in the photo above). It is attached to the rod with a locking screw, or, in the simplest case, secured with a spring-loaded locking pin. We unscrew the screw with a screwdriver or a hexagon, depending on the shape of the groove on it. If we are dealing with a spring-loaded pin, then you need to press it inward with a nail and forcefully pull the handle away from the door.
By removing the handle, we gain access to the socket. If the mounting screws are visible on the socket, then by unscrewing them we can immediately remove it from the rod. But more often there will be a special overlay on top of the fasteners (a decorative flange - in the photo above it is labeled as a socket). It will have a groove where it meets the door, by which it can be pryed with a screwdriver and removed. Perhaps the trim just needs to be turned counterclockwise if it is held on by the thread. By removing the decorative trim we gain access to the mounting screws that secure the socket itself. Since access to them is open and nothing is in the way, they will be easy to unscrew with a screwdriver.

It happens that the socket, just like the handle in other designs, has a hole in the end: there is a spring-loaded pin in the recess. In this case, to remove the socket, you need to press on it with a nail, while simultaneously pulling the socket off the rod. If you find a hole, but there is no pin in it, this means that when installing the handle, the socket was turned around its axis and the pin is located somewhere else. You can find it by smoothly turning the socket with a nail inserted into the recess until the nail rests on the pin.

After disassembling the handle in the suggested sequence, you will be able to determine the exact design of your particular model. And based on its characteristics, draw conclusions about what exactly caused the breakdown and how to fix it.

Types of handles for interior doors

Door handles are sold in two types: “knob” and “rosette”. The handle of the knob is usually hollow and light, while the handle on the rosette is made of more massive materials and is usually non-hollow inside. Over time, when the spring mechanism wears out, the first structure may begin to wobble or even sag. The second is that it will last longer and be more comfortable to use. Accordingly, their prices differ: the most budget-friendly options are knob handles.

The shape of the handles is divided into rotary And push. The push button has a classic handle shape: when you press it, the door latch is hidden in the lock body and the door opens. The rotary handle has a ball shape, which makes it less noticeable. In addition to the difference in design, these two designs differ in features that are not obvious at first glance.

The rotary handle is more compact: it is more difficult to accidentally touch it when passing by the door. And if this happens, it will not be as painful as with a push handle. At the same time, using a ball-shaped pen every day with wet or oily hands from cream is very inconvenient - your hands slip. So, if used regularly on kitchen or bathroom doors, the push handle will create fewer problems for you.