Which product cleans the bath better? Proper care of an acrylic bathtub. How to remove traces of various dyes

Olga Nikitina

Reading time: 13 minutes

A A

The bathroom is, as you know, the “face” of the owner of the apartment. It is by the cleanliness of the bathroom that one judges the cleanliness and hard work of the fair half of a particular house. Of course, cleaning always takes a lot of time, but the bath should remain perfectly clean - even if there is a creative mess around.

True, to a large extent the cleanliness of the bathtub depends on the material from which it is made. If, for example, it is enough to wipe an acrylic bathtub with a regular sponge and soap, then washing a cast-iron bathtub is sometimes not so easy...

8 best store-bought cast iron bathtub cleaners - what to look for when purchasing?

Each cast iron bath, as is known, is covered with enamel, which is applied inside the container using an electrostatic method, after which the product is “baked” in a heat chamber.

It is with cleaning the enamel that the housewife has problems: the enamel on cast iron bathtubs ah quite quickly loses its appearance under the influence external factors and in the absence of preventive measures.

What is usually used to clean a cast iron bathtub?

First of all, from limescale , which covers the enamel with a nasty color due to bad water and the presence of various impurities in it.
Rust. How older pipes, the more unpleasant rusty stains there will be on the bathtub. It is worth noting that in old cast iron baths, zirconium components were used in the production of enamel to increase strength and improve other properties, but, alas, they contribute to the faster formation of rust, corrosion and scratches with cracks. Modern production processes use titanium salts, which ensure smoothness of the product and high wear resistance.
Fat. All the dirt that a person washes off the body, along with sweat and skin particles, settles on the bathtub machines. Naturally, when the container is rarely cleaned, all this settles on the walls of the bath and gradually builds up on top of each other, resulting in the formation of a serious and difficult-to-clean deposit.

It is also important to note that the enamel of old bathtubs is very, very fragile, and cleaning with aggressive agents can quickly damage the coating, even leading to terrible “gaping” dark spots on the bottom.

How do Russian buyers clean their cast iron bathtubs?

Video: How to clean a bath quickly? How to make a bath snow-white?

8 Best Store-Bought Cast Iron Bathtub Cleaners

White. With its help, you will return your bathtub to its original whiteness and get rid of bacteria, grease stains, paint stains, fungus and mold. True, it will not cope with either limescale or rusty stains. Therefore, it is recommended to use the product where strict and emergency resuscitation of the container is not required - just “add gloss and return whiteness.”
The product is diluted 1 to 2 and the container is washed with a hard sponge (not metal!). You can also pour into full of water bath 100 ml of white, shake and leave overnight. It is strictly not recommended to use the product in its pure form! The average cost is about 60-80 rubles.
Mister Muscle. It will help you disinfect the bathtub, clean it from limescale, dirt, and grease. This composition penetrates very deeply (with correct use) into the structure of stains and quickly destroys them.
Plus, unlike white, Mister Muscle is much easier and more enjoyable to use. Pros: presence of a trigger, absence of abrasives. The average cost is about 200 rubles.
Cif. One of the most popular cleaning products in general today. Sif is used successfully both in the kitchen and in the bathroom.
This product instantly and effortlessly removes even old rust and heavy limescale deposits, leaving all surfaces shiny. We recommend Sif Ultra White, which has whitening properties. The average cost is about 180 rubles.
Comet. Another ideal product for cleaning cast iron bathtubs. Today it is available in convenient plastic bottles in the form of a gel; it does not scratch the enamel and easily removes all “troubles” from the surface of the bathtub, and at the same time all microbes.
It is enough to apply the product and wait 10 minutes, then wash off the dirt with a sponge. The average cost is about 190 rubles.
Sanox. A powerful product for the most difficult stains. You could say "heavy artillery" in household chemicals. Sanox allows you to wash away everything that previous products couldn’t deal with. And white-hot. This gel will also remove all bacteria and unpleasant odors. Remember that this product is very strong, and for thin enamel it is better to choose a product with a more gentle composition. The average cost is about 100 rubles.
San Klin. This product contains no phosphates or harsh abrasives and is suitable for any bath. It does not have a nasty chemical smell, it is easy to apply using a trigger, and quickly removes any dirt. Average cost – 170 rubles.
Frosh. Aromatic eco-product based on fruit acids. Not suitable for heavily soiled bathtubs, but ideal for preventive maintenance and regular cleaning of the container.
The product is safe for people and washes off easily. Average cost – 250 rubles.
Mr. Chister. A product with an effective composition that will help remove fungus and mold, destroy bacteria and odors, and wash away light stains. It has a spray bottle and has a pleasant aroma. The average cost is 150 rubles.

How to clean a cast-iron bathtub from rust and plaque at home - 7 best folk remedies for cleaning bathtubs

Not everyone uses store-bought products when cleaning their home.

Some fundamentally do not want to spend their money on expensive household chemicals, others fundamentally do not use them, choosing safe home remedies. Still others are allergic to household chemicals, while others simply suddenly ran out of all the “saving bottles” in the nightstand under the bathroom. In these cases, “grandmother’s remedies” are used.

Among all the folk recipes used when cleaning a cast-iron bathtub, we have chosen for you the most popular and effective:

To remove rust. We take 1:1 ammonia and regular hydrogen peroxide, mix and apply to areas with stains.
We remove rust and yellowness. Mix salt and vinegar 1:1 and lubricate problem areas with this paste. You can leave the mixture for several hours - it will not harm the coating.
From limescale. Mix salt and soda 1:1, apply the mixture to problem areas for 2 hours, then wash off the already softened plaque with a regular sponge.
From limescale. Dilute oxalic acid to a semi-liquid consistency, lubricate the plaque, wait 1.5 hours.
For regular cleaning. We apply regular soda to a sponge and treat the bath with it instead of powder. Simple, economical and without harm to the surface.
From rust. Mix turpentine (35 ml) and salt (about 100 g), apply to the surface and clean.
From rust and plaque. Mix 3 parts mustard (dry) and 1 part soda, clean as with regular powder. Ideal for cleaning your bathtub once a week.

Video: How to clean a cast-iron bathtub from plaque at home?

Bathtub cleaning tools and products - what should not be used to clean a cast iron bathtub

If you inherited an old and rusty cast-iron bathtub along with your apartment (or, while you were on a business trip, your family brought the bathtub to the point of “easier to throw away”), then you should remember: What products and tools are not recommended to be used so as not to damage the enamel:

Products with chlorine (unless you're dealing with mold).
Products with aggressive acids. They are used only “spotwise” on problem areas and are not left for long.
Products with abrasives . They can scratch the enamel, which in turn will be the beginning of the end of your bath. Through the scratches, rust and plaque will penetrate deeper and deeper, the cracks will become larger, and then it won’t be long until the cast iron itself.
Products with concentrated hydrochloric acid.
GOI paste. It is not used for polishing enamel! If you decide to polish, use a super-soft auto polish and a regular soft white cloth for the enamel. Polishing will take you 20-30 hours, but you will like the result.

When choosing tools to clean your cast iron bathtub, avoid...

Hard brushes.
Sponges and brushes with metal.
Fiberglass sponges.
Blades and other auxiliary tools.

Ideal option - a moderately hard sponge or a regular brush with a handle.

Also today, housewives successfully use and melamine sponges - But, for all their magical effectiveness, they remain extremely toxic when melamine enters the body, so their use remains controversial.

Prevention of dirt and deposits on cast iron bathtubs

No one will argue that it is much easier to keep a bathtub white if you wash it regularly and care for it properly. Moreover, if it is a cast iron bathtub, which requires a special approach.

You can extend the life of your bathtub and postpone its replacement (installation of liners, etc.) through simple manipulations called prevention:

Rinse the bathtub with a mild detergent every evening after everyone has washed . Be sure to dry it with a towel to prevent rust.
Twice a week - or at least once - we thoroughly clean the bathtub - with a serious remedy.
We repair taps/mixers immediately upon detection of a malfunction. Leaky faucet = deep rust.
We use soft remedies and tools for cleaning.
We monitor the water temperature. At temperatures above 65 degrees, cracks may form in the enamel.
We quickly remove all cracks and chips - with the help of a specialist or independently - using a special putty and epoxy resin.
We prefer gel and paste cleaning products . Powder products contain abrasives that scratch enamel.

If you follow all the rules, you can extend the life of your favorite bath by 10-15 years.

However, there is always an option with an acrylic liner, which is placed directly in a cast-iron bathtub.

The site site thanks you for your attention to the article! We will be very pleased if you share your feedback and tips in the comments below.

This material is subjective in nature, does not constitute advertising and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

Regular cleaning and maintaining hygiene standards is the key to the health and well-being of family members. The bathroom also deserves attention, where it is important to maintain cleanliness and order. A dirty bathtub with stains is a breeding ground for pathogenic microorganisms. To get rid of this, choose cleaning products. There is a huge range of household chemicals for plumbing to choose from, so all that remains is to choose the right one.

Rating of the best bath cleaning products

nomination	place	name of goods	price
The best products for cleaning cast iron bathtubs	1		125 RUB.
	2		177 RUB.
The best cleaning products for acrylic and enamel bathtubs	1		145 RUB.
	2		155 RUB.
	3		487 RUB.
The best product for removing plaque and rust	1		164 RUB.
Best Safe Bath Cleaner	1		410 rub.

Bathtub cleaner. Which company should you choose?

The household chemicals segment offers a huge range of products. Visit a hardware store to see for yourself. Buyers are offered both universal and specialized products for cleaning bathtubs and other plumbing fixtures. The price range also varies greatly. At the same time, cheap drugs cope well with the tasks, but for complex stains it is better to select products from proven professional brands.

Cif

The Cif trademark belongs to the Dutch-British company Unilever. Detergents from this manufacturer have already gained popularity in the Russian market. Cif abrasive creams with a unique formula are sold in 50 countries around the world.

Comet

A popular brand in the household cleaning chemicals segment. The US company was founded in 1956 and is popular. Products under the Comet brand occupy the budget segment in our country and are intended for regular use at home.

This brand produces universal cleaning products belonging to the manufacturer Benckiser. The company's products have been represented on the Russian market since 1994 and have consistently enjoyed great success. These are inexpensive detergents for plumbing fixtures and dishes.

The best products for cleaning cast iron bathtubs

Cast iron bathtubs are popular today, despite the emergence of analogues. This material is famous for its reliability, so plumbing fixtures will last for decades if properly cared for.

According to customer reviews, this is a popular cream for whitening cast iron bathtubs. Difference from classic cream CIF consists of special micro granules that remove grease and whiten the surface. It is safe for all types of coatings and is often used to remove stubborn stains on enamel. For many housewives, CIF has become a means of regular use, thanks to quick effect and affordable price.

One of the most inexpensive products. Cif produces a lather that helps remove soap stains and salt deposits. But it is unlikely to cope with serious contamination in the form of mold and water stone.

Advantages

soft and safe whitening of enamel and acrylic;

balanced price-quality ratio;

economical consumption;

Flaws

not suitable for combating water scale, mold and stubborn stains;

does not damage the skin of the hands;

effort must be made to remove stains;

Comet Gel

Inexpensive and effective gel for cleaning the bathroom. The texture of the gel provides a soft effect on the surface without damaging the enamel, especially recommended for cast iron bathtubs. The cleaning base does a good job of removing yellow stains and limescale. The foam is applied for 10 minutes, after which the stains are easily wiped off with a sponge. In addition to this, there are disinfectant additives that prevent the spread of germs.

The product in the form of a gel belongs to the budget segment, although it costs more than its competitors. Unlike Cif, it does a good job of removing rust and limescale in 10 minutes. But for such a procedure they are selected individual means protection for precaution.

Advantages

removal of all types of contaminants;

effective whitening;

disinfection;

soft effect on enamel without scratches;

Flaws

pungent odor;

stains must be removed manually using protective products.

Rating of the best cleaning products for acrylic and enamel bathtubs

Acrylic and enamel bathtubs have an attractive appearance. But they require protection and regular cleaning using detergents.

Luxus Professional “Clean Bath” active foam is suitable for acrylic and enamel bathtubs, which provides intensive cleaning of plumbing fixtures. The product in the form of a spray is easy to apply, and thanks to the 15% anionic surfactant, it fights well against stains, rust, limescale, and pathogenic microorganisms. Luxus Professional has repeatedly won various competitions where its effectiveness was noted.

Luxus Professional foam is applied to the surface for 10-15 minutes and then washed off. This is a powerful product that costs more than its competitors.

Advantages

convenient dosage using a spray bottle;

effective whitening and disinfection;

antibacterial coating;

absence of aggressive components;

universal product for various surfaces;

Flaws

strong and pungent odor.

Unicum

Unicum universal spray cleaner helps fight stains and stubborn dirt. The acid content in the composition does not exceed 5-10%, but this allows you to remove not only soap stains, but also rust and mold. The dispenser helps you select the quantity detergent, thanks to this, economical consumption is ensured. The composition contains surfactants and acids, so precautions must be taken. This effective remedy, although you can find cheaper options on the market.

Unicum's powerful cleaning solution will help clean your bathtub, sink and kitchen. Unlike other competitors, Unicum has an acid base, so you need to handle the surface of the bath carefully and use protective gloves.

Advantages

effective cleaning various contaminants- mold, rust, plaque;

versatility of use for washing plumbing fixtures;

convenient sprinkler;

Flaws

acrid odor;

hazardous if in contact with skin.

Bagi "Akrilan" is the best product, according to ordinary buyers. It contains active chemical compounds And citric acid. Thanks to this combination, it is possible to achieve effective cleaning and disinfection at the same time. At the same time, it does not damage acrylic and enamel, so you can use it without fear, but do not forget about gloves and masks. The main disadvantage is the cost - for a more powerful composition you will have to pay almost 2 times more.

Acrilan copes with rust, mold, plaque, but is one of the most expensive in the segment. It cleans cracks well and destroys germs, but the active chemical components are dangerous to health, so you need to work carefully.

Advantages

convenient dosing using a spray bottle;

quick impact in 5-10 minutes;

effective whitening of acrylic and enamel surfaces;

Flaws

acrid odor;

high cost compared to competitors.

The best product for removing plaque and rust

A common problem when using a bathtub for a long time is limescale and rust. To remove them, it is better to select special cleaning products that can corrode the stains without damaging the enamel.

Cilit Bang is the market leader as the best all-purpose bath cleaner. It effectively fights pollution. It can be used to clean bathroom fixtures, kitchen stoves, tiles and other surfaces. Unlike competitors, hazardous substances in the composition are replaced with oxalic acid, so Cilit Bang can be used regularly. Housewives love that you can wash almost everything in the house with one product.

An inexpensive product for cleaning bathtubs and other plumbing fixtures from rust and stubborn plaque. Cilit Bang offers one of optimal options in terms of price and final result.

Advantages

effective splitting of rust on enameled surfaces;

creating a dirt-repellent surface;

convenient application using a spray bottle;

Flaws

persistent chemical odor;

contains chlorine.

Best Safe Bath Cleaner

Amway products belong to the professional category of cleaning products that are used in organizations. Amway Lock is a universal product that can cope well with dirt. It is applied in the form of a gel, which does not contain chlorine or active acid. Amway Home LOC is safe, so it is used even in rooms with children and animals, but it is unlikely to be able to cope with severe pollution.

The product has a very reasonable price, which is why it is popular. If you need to choose a safe composition for home use no chemical smell, then Amway Home LOC is suitable for this. Although severe rust sometimes requires products based on acidic components.

Advantages

versatility of application;

hypoallergenic and biodegradable base;

economical consumption during cleaning;

pleasant aroma due to additives;

safe composition and absence of strong odors;

Flaws

Not suitable for stubborn stains.

Which bath cleaner should I buy?

Popular cleaning products for combating stains are Cif Crem and Comet Gel. They attract with a balanced price-quality ratio, so many housewives keep them on hand. These products are universal, so they can be used to wash cast iron, acrylic and enamel bathtubs, kitchen utensils and much more. The budget price also contributes to its popularity.

Powerful products include Bagi “Akrilan” and Luxus Professional. They contain active chemical components and a concentrated composition. Thanks to this, they cope well with stubborn dirt, including rust and plaque.

Attention! This rating is subjective, is not an advertisement and does not serve as a purchase guide. Before purchasing, consultation with a specialist is required.

In spring, not only the body requires renewal and freshness, but also housing =) Therefore, I continue to write about environmentally friendly bathroom cleaning products that will not cause harm to health.

This year I went to European cities several times and looked into every store healthy eating who met! It’s nice to see the familiar Ecover brands and Natracare hygiene products in Germany and Italy, and at prices higher than we buy them.

Therefore, I did not bring safe chemicals from Europe, but I’m currently collecting a basket on iHerb with household supplies, for spring cleaning =)

Bathroom cleaning products

Last year, a large-scale audit by EWG (an independent organization) showed these results for bathroom cleaning products. We tested 227 products from 58 popular brands, half fell into category F: the most dangerous for human health and the environment.

Safety was assessed using five points:

asthma/lung toxicity
allergic reactions/skin irritation
reproductive toxicity
carcinogenicity
environmental impact

I looked through the entire list and chose the safest health products, which can be purchased on iHerb. They are not sold in Russia, and no one tests “our chemicals” for irritation and toxicity.

Bathroom cleaning products rating

⇒ ATTITUDE, Daily Shower Cleaner, Citrus Zest(cat. B), daily cleaning product for bathrooms, tiles, showers. EcoLogo certified, Canada's internationally recognized environmental standard. I love this brand, I use everything I buy with pleasure.

⇒ Bio Kleen, Bac Out, Bathroom Cleaner(cat. B), a universal bathroom cleaner with ″living enzymes″ and citrus fruits, does not require rinsing. Cleans and removes unpleasant odors.

⇒ Bio Kleen, Bac-Out Drain Care, Gel Coating Action(cat. B), a clogged drain clearing gel with enzyme and live bacteria technology that breaks down organic matter and clears blockages. Cleans and deodorizes drains and prevents clogging.

⇒ Bio Kleen, Soy Toilet Cleaner (cat. B), soy scrub for cleaning the toilet, removes stains and dirt, deodorizes with mint essential oil. In addition to cleaning toilets, it is suitable for tiles, sinks, bathtubs and showers.

⇒ Ecover, Toilet Cleaner, Pine Fresh(cat. B), toilet bowl cleaner based on plant-based, biodegradable ingredients, with a fresh pine scent.

⇒ Method, Daily Shower, Natural Shower Cleaner, Ylang Ylang(cat. B), daily spray for cleaning showers and bathtubs, prevents soap deposits on tiles and glass, no rinsing required. Suitable for tiles, glass, fittings.

⇒ Mrs. Meyers Clean Day, Multi-Surface Everyday Cleaner, Basil Scent(cat. B), a universal assistant for daily removal of dirt, cleaning surfaces and adding freshness. Spray suitable for: wood, tile floors, countertops, porcelain, plumbing fixtures, artificial stone and granite. And the smell of basil calms the nerves =)

⇒ Mrs. Meyers Clean Day, Multi-Surface Concentrate, Lavender Scent(Category B), this relaxing lavender scented concentrate is as versatile as the basil product above. For daily cleaning it needs to be diluted with water, but to remove heavy dirt it can be used in its pure form.

⇒ Mrs. Meyers Clean Day, Toilet Bowl Cleaner, Lavender Scent(cat. B), toilet bowl cleaner with essential oils lavender and orange. Removes dirt and unpleasant odors, refreshes surfaces.

⇒ Citra-Solv, Homesolv, CitraDrain, Natural Enzyme Drain Cleaner(Cat. C), a powerful enzymatic drain cleaner, safely unclogs drains and removes debris while leaving behind a citrus scent. Safe for all plastic and metal pipes, domestic wastewater and septic systems. Does not damage water supply.

⇒ Method, Bathroom Cleaner, Eucalyptus Mint(cat. D), bathroom and tile cleaner. Non-toxic, easily dissolves soap scum, removes mold and mildew stains. When cleaning, you don’t need to hold your nose and be afraid of getting poisoned by the fumes. Suitable for: showers, tiles, fittings, porcelain and chrome surfaces.

These are the bathroom cleaning products. Have you tried anything from the list? What ″chemistry″ do you prefer?

Everyone likes a snow-white, ideally clean bathtub, but does everyone love and know how to care for it? It is clear that this matter cannot be done without the best cleaning agent. “Price Expert” has compiled a list of the ten most effective and popular bath cleaning products among housewives.

How to choose the best bathtub cleaner?

Experts advise cleaning the bathtub with gel or liquid composition, avoiding harsh abrasives and concentrated acids. The composition should be relatively safe, cope well with rust stains, lime deposits and soap deposits and not harm the surface. Disinfectants in the composition will help get rid of germs and unpleasant odors.

Enamel bathtubs and acrylic bathtubs require different cleaning compounds:

Enamel bath Hard particles and high concentrations of acids can damage. To preserve enamel, use products with surfactants that form large number foam that literally absorbs dirt. It is possible to use soft abrasives and weak acids. Use more aggressive formulations only in the most exceptional cases and specifically in particularly contaminated areas.
Acrylic bathtubs consist of a polymer that is easily scratched, absorbs dirt and is painted. This means that excellent appearance and whiteness must be maintained with special liquids and sprays for acrylic and plastic. No cleaning particles (even soft ones), solvents or strong acids. If the packaging does not indicate that the product is suitable for a given type of bath, it is better not to use it at all. The same recommendations can be applied to shower cabins that have a base and elements made of acrylic.

One of the main conditions for a comfortable stay in the bathroom is the cleanliness of the plumbing equipment. To comply with hygiene requirements and keep your bathroom in order, all you need to do is buy a bath cleaner.

Let's consider what products are in demand in domestic stores, why they are good, and why they do not satisfy users.

Due to low demand, it is not profitable for manufacturers to produce special solutions for washing bathtubs, cleaning or sinks, so most of the compositions on the market are universal. Modern sprays and gels are suitable for ceramics, tiles, glass and chrome elements.

If the bottle label says “for cleaning plumbing fixtures,” this does not mean that the solution is suitable for acrylic or enamel - be sure to read all the fine print

Oddly enough, the best means Universal solutions are used for cleaning bathtubs. The TOP 10 presents the samples that scored the most positive feedback and are relatively safe for health.

Place #1 – Synergetic spray

The pleasant-smelling composition took first place due to its versatility, environmental friendliness and low cost. It is biodegradable and does not contain chlorine. Hypoallergenic, therefore suitable for cleaning bathrooms used by children. In addition to plumbing fixtures, the spray can be used to treat tiles, artificial stone surfaces, plastic, and enamel.

The composition of the product does not harm the systems biological treatment water, which is why Synergetic is often purchased by owners of private houses and summer cottages. Cleans away stains efficiently, and works effectively in combination with cold water.

Specifications:

antibacterial - yes;
removes odor - yes;
from rust - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

The main advantages of the detergent are its composition, which does not destroy chrome, nickel, ceramic, and plastic surfaces. The liquid smells pleasant and does not cause discomfort when inhaling the aroma. Copes well with lime and stains, especially fresh ones.

According to reviews, the spray cannot handle old stains; it is better to use it for daily or frequent cleaning. You may encounter complaints about enamel being washed off from bathtubs - it is possible that the acid contained in the spray destroys low-quality enamel coatings on steel and cast iron bathtubs.

Place #2 – GraSS Gloss spray

The liquid product, applied using a sprayer, is universal and suitable for almost all surfaces that can be found in the bathroom: ceramics, tiles, plastic, glass. The manufacturer recommends using a cleaning spray acrylic bathtubs and guarantees preservation appearance and structures.

The active ingredient is citric acid, which actively fights lime deposits and salt stains. A well-chosen composition also copes with rust, especially fresh marks from metal objects - chains, tubes of shaving foam. Suitable for processing acid-sensitive materials, but with one condition: the cleaning liquid is applied for half a minute and immediately washed off with water.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - yes;
from rust - yes;
from lime deposits- yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

Due to its availability and low cost, GraSS spray is one of the popular products. Buyers like that with one bottle they can tidy up the walls, floors, plumbing fixtures and mirrors in the bathroom. Fresh stains and smudges can be easily removed. Users claim that even without protection, the liquid does not corrode the skin, although the manufacturer still advises wearing rubber gloves.

The product copes worse with stubborn stains and old limescale stains. Perhaps this is the only disadvantage of the spray.

Place #3 – Comet gel

Comet brand products are known to a wide range of users thanks to successful advertising. And, as a result, sales of bath gel are booming. However, the cleaning composition really efficiently removes dirt from ceramics and tiles, as evidenced by hundreds of positive reviews. It is especially good at eliminating rusty stains that tap water leaves on the surface of the bathtub.

The name of the series “7 days of cleanliness” partially reflects reality - after cleaning the bathroom with a universal gel, the tiles and plumbing fixtures begin to shine, and the gloss remains for some time. The manufacturer warns that the product should not be used to clean products made from natural stone, metals, as well as for washing dishes.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - yes;
from rust - yes;
from lime deposits - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

The product with acid was rated mostly positively by users. They note the high-quality cleaning of ceramics and tiles from rusty stains and lime. The composition is great for cleaning sinks and toilets, but caution is required when handling other items. The manufacturer advises doing a test cleaning to make sure the composition is safe.

The main complaints relate to the pungent odor, which persists for some time after cleaning. Many people notice that the gel is not thick enough, which is why it is quickly used up and is less effective.

Place #4 – Sanfor Expert gel

A highly scented, versatile, inexpensive option for bathroom and bathroom cleaners. The pronounced floral scent that spreads during use is called “Alpine freshness”. The blue gel foams strongly when mixed with water, resulting in more water required to rinse off.

Does not contain chlorine, the main components are acids. For this reason, the manufacturer does not recommend cleaning products on which the enamel has been chipped, as well as objects made of natural stone. It is also customary to test small areas before washing enamel and acrylic bathtubs, so as not to end up with an unpleasant surprise.

Like other acidic products, Comet Gel should not be mixed with other cleaning powders, gels and sprays in order to avoid an unexpected reaction that is primarily dangerous to the health of users.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - yes;
from rust - yes;
from lime deposits - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

Buyers do not complain about the quality of cleaning of bathrooms with light stains - fresh stains are removed without a trace. It is more difficult with an old water stone; for some it disappears after “soaking” in the gel, for others it remains. The smell does not cause irritation; many people find it pleasant and appropriate.

There are few negative aspects - a large amount of foam and the inability to clean acid-sensitive surfaces.

Place #5 – Unicum spray

An effective product for owners of acrylic bathtubs who are not content with universal solutions, but prefer special formulations. The spray is suitable for regular cleaning of both bathtubs and showers, the body of which is also made of acrylic.

Sprayed onto a polymer surface, the product acts gently, while removing rusty stains, lime and soap stains, making the surface shine and remain clean for a long time. But it has a big drawback - a very pungent odor, which is caused either by the antifungal component included in the composition, or by other aggressive additives.

Perhaps this is why the composition needs to be applied for only 15-20 seconds, for a maximum of 1 minute, and then needs to be washed off.

Specifications:

purpose – cleaning acrylic surfaces;
antibacterial - yes;
removes odor - yes;
from rust - yes;
from lime deposits - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

The cleaning quality of the spray is rated as good. It easily copes with dirt, removes even old stubborn stains on bathtubs and limescale stains on the transparent plastic of cabins. The liquid is consumed sparingly thanks to the spray nozzle, so the bottle lasts a long time.

The main disadvantage is the pungent smell, which not everyone can stand. Because of the spray, tiny droplets enter the air and interfere with breathing. The product is not recommended for use by people with sensitive skin.

Place #6 – SARMA gel

The main active ingredient is oxalic acid, which is often used to remove lime. However, the gel is universal and is designed to fight rust, dirt, germs and even mold with equal effectiveness. Simply put, it is a good disinfectant that will help keep your plumbing clean when used regularly.

There are similar varieties: Universal, Anti-Rust, Disinfection, etc. Bath cleaning products are distinguished by a standard bottle shape, while toilet gel is in containers with an easily recognizable neck. The composition of all the listed funds is practically the same. Therefore, any of them can be used to tidy up sinks, bathtubs, toilets, bidets, and stalls.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - yes;
from rust - yes;
from lime deposits - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

Buyers positively assessed the quality of cleaning with an inexpensive product: just apply the gel, leave for a few minutes and rinse off, and the tiles, ceramics or enamel begin to sparkle clean. Many people have the opinion that the solution not only removes dirt, but also whitens surfaces.

Unfortunately, like many acidic products, Sarma does not cope with the yellowness and stubborn stains characteristic of old cast iron baths.

Place #7 – Tub&Shower spray

The hypoallergenic product of the Canadian company Eco mist is designed to remove all types of dirt in the bathroom. It removes soap stains and splashes from the walls of booths, smudges from taps, and stains on the bathtub. Cleans tiles until they shine. Fights fungus and mold: to do this, spray the product over the entire affected area and leave for 10-11 minutes, then rinse.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - no;
from rust - no;
from lime deposits - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

Users like the safety of using the product at home, the lack of toxicity, and the convenient dispenser.

Inconvenience is caused by the lack of effectiveness inherent in more aggressive universal means. For example, the composition does not deal well with traces of rust on enamel and ceramics, so you will have to use another product to remove them. And another negative point is the high cost that is typical for natural biodegradable cleaning solutions.

Place #8 – Ecover spray

An acidic product that many consider natural due to the absence of chlorine. The main active ingredient is citric acid. The composition also includes fragrances with the smell of citrus fruits and non-ionic surfactants. The product, made in Belgium, copes well with lime deposits, but a little worse with rust.

In addition to performing basic cleaning functions, it fights mold and muffles the smell of sewerage with a pleasant aroma. Not suitable for cleaning granite, marble, and enameled surfaces. But it cleans nickel-plated and chrome-plated taps and shower heads to a shine, and does not harm plastic.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - yes;
from rust - yes;
from lime deposits - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

According to reviews, it is an excellent tool for daily bathroom care. Using a spray bottle is convenient and pleasant. Does not cause irritation to the skin, refreshes the air during cleaning. Suitable for sewer systems with septic tanks and SBO.

The main disadvantage is the high cost. Buyers who regularly use bathroom cleaning products prefer cheaper domestically produced analogues.

Place #9 – Sanox gel

An inexpensive universal product for those who value price-quality ratio. The composition is not concentrated, so it takes a lot to clean the bathtub. But, given the low cost of the bottle, you can use it without saving much. Removes grease stains and dirt natural origin, rust and limescale stains.

Kills bacteria, but does not effectively fight unpleasant odors. Your own “aroma” is not pleasant and causes negative sensations. It is immediately noticeable that the composition is “chemical”. Like all acidic products, it is considered aggressive to enamel, so before the first cleaning it is necessary to carry out a test cleaning small area.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - no;
from rust - yes;
from lime deposits - yes;
acrylic bathtub - yes;
There is no chlorine in the composition.

The main positive quality is low cost. Thanks to her, the product is bought not only for home use, but also for cleaning the bathrooms of children's institutions, hotels, public institutions, catering outlets.

Disadvantages: pungent odor, lack of dispenser. Contraindicated for housewives with sensitive skin and allergies to chemicals.

Location #10 – EasyWork Cleaning Liquid

Large five-liter plastic canisters gained popularity due to its efficiency. Inside the containers there is a liquid, which for high-quality cleaning must be distributed over the surface, and this is quite difficult to do due to its fluidity. As a result, cleaning is labor-intensive and ineffective.

However, the manufacturer states that the product is intended for cleaning surfaces of various kinds, especially for ceramic products, sanitary ware, chrome taps - that is, for almost all items in the bathroom.

The liquid obtains its cleaning properties due to the presence of chlorine, or more precisely, hypochlorite, which contains more than 90% active chlorine. This component can fight mold and mildew, which can be useful in rooms with high humidity.

Specifications:

purpose – cleaning plumbing;
antibacterial - yes;
removes odor - yes;
from rust - yes;
from lime deposits - yes;
acrylic bathtub - yes;
chlorine in the composition - yes.

The main advantage of the product is its economical cost. Technical containers are often purchased not for household use, but for cleaning toilet rooms in public institutions. For home use, it is better to choose a more concentrated, but less safe and effective composition.

The main disadvantage is toxicity. Many buyers have abandoned household chemicals containing chlorine, since it has long been proven negative influence on human health, especially with constant contact. Before cleaning your home bathtub with chlorine liquid, try a more gentle composition - at least a solution of soda and laundry soap.

Household chemicals do a good job of removing limescale, soap stains, greasy dirt, and traces of rust thanks to the aggressive substances included in the solutions. However, caustic components along with dirt can remove part of the coating, after which the bathtub will look unkempt.