GESN 10-05-011-02

Device suspended ceilings from plasterboard sheets(GKL) according to the system: single-level (P 113)

LOCAL RESOURCE STATEMENT GESN 10-05-011-02

Name	Unit of measurement
Installation of suspended ceilings made of plasterboard sheets (GKL) according to the system: single-level (P 113)	100 m2 ceiling
Scope of work
01. Marking the design position of the metal frame. 02. Sticker sealing tape on the guide profiles. 03. Installation and fastening of guide profiles with dowels. 04. Installation of hangers with clamps and rods. 05. Installation of main and supporting profiles. 06. Connecting profiles to each other using single-level connectors. 07. Sticker of dividing tape in places where it meets the surface of walls and partitions. 08. Covering the frame with plasterboard sheets and fastening them with self-tapping screws. 09. Sealing longitudinal seams with putty using reinforcing tape, transverse seams and screw holes - without tape. 10. Surface priming.

PRICE VALUES

The price indicates the direct costs of work for the period March 2014 for the city of Moscow, which are calculated based on standards 2014 with additions 1 by applying indices to the prices of used resources. Indices were applied to federal prices 2000.
The following indices and hourly rates from the “Union of Estimating Engineers” were used:
Index to the cost of materials: 7,485
Index to the cost of cars: 11,643

Hourly rates used:
The monthly wage at a given hourly rate is indicated in brackets.
Hourly rate 1st category: 130.23 rubles. per hour ( 22 920 ) rub. per month.
Hourly rate 2nd category: 141.21 rubles. per hour ( 24 853 ) rub. per month.
Hourly rate 3rd category: 154.46 rubles. per hour ( 27 185 ) rub. per month.
Hourly rate 4 categories: 174.34 rubles. per hour ( 30 684 ) rub. per month.
Hourly rate 5th category: 200.84 rubles. per hour ( 35 348 ) rub. per month.
Hourly rate 6th category: 233.96 rubles. per hour ( 41 177 ) rub. per month.

By clicking on this link, you can see this standard calculated in 2000 prices.
The basis for the use of the composition and consumption of materials, machines and labor costs are GESN-2001

LABOR COSTS

№	Name	Unit Change	Labor costs
1	Labor costs of construction workers Grade 3.5	person-hour	97
Total labor costs for workers		person-hour	97
Workers' compensation = 97 x 164.4		Rub.	15 946,80

OPERATION OF MACHINES AND MECHANISMS

№	Cipher	Name	Unit Change	Consumption	Article number Rub.	Total Rub.
1	134041	Screwdriver	mach.-h	2,2	34,93	76,85
2	330901	Electric scissors	mach.-h	0,32	391,09	125,15
3	331451	Electric rotary hammers	mach.-h	1,3	24,22	31,49
Total			Rub.	233,48

CONSUMPTION OF MATERIALS

№	Cipher	Name	Unit Change	Consumption	Article number Rub.	Total Rub.
1	101-2430	Primer, KNAUF	kg	10	97,9	979,00
2	101-2437	Putty, KNAUF	kg	4	55,84	223,36
3	101-2438	Putty, KNAUF	kg	42	20,21	848,82
4	101-2474	Paper tape for increasing the crack resistance of gypsum board and gypsum board joints	m	68	1,27	86,36
5	101-2480	Separating tape for connecting the LGK ceiling to the wall	m	1,35	1294,9	1 748,12
6	101-2484	Elastic self-adhesive tape for guide profiles 30/30000 mm	m	135	2,77	373,95
7	101-2509	GKL plasterboard sheets 12.5 mm	m2	111	112,28	12 463,08
8	101-2582	Self-tapping screw (LN) 3.5/9.5 mm	pcs.	3,68	14,97	55,09
9	101-2583	Self-tapping screw (TN) 3.5/25 mm	pcs.	22,21	14,97	332,48
10	101-2589	Dowel-nail 6/39 mm	pcs.	0,81	523,95	424,40
11	101-2590	Dowel with screw 6/35 mm	pcs.	3,22	59,88	192,81
12	201-0797	Guide profile PN 28/27/0.6	m	136	29,94	4 071,84
13	201-0802	Ceiling profile PP 60/27/0.6	m	306	41,17	12 598,02
14	201-0816	Suspension with clamp for PP profile 60*27 mm	pcs.	0,81	935,62	757,85
15	201-0823	Single-level profile connectors PP	pcs.	1,83	1197,6	2 191,61
16	201-0831	PP profile extension 60*27	pcs.	0,81	441,62	357,71
17	201-9010	Suspension traction	pcs.	81	0	0,00
Total			Rub.	37 704,50

TOTAL BY RESOURCES: 37,937.98 RUB.

class="eliadunit">

From the author

I continue the series of articles about Knauf’s technologies for installing plasterboard structures. Today the suspended ceiling is on a single-level frame made of metal profiles, under the brand name P113 (P-113, P113).

How does the P113 ceiling differ from the P213 ceiling

A suspended ceiling on a single-level frame in the designations of KNAUF complex systems is designated as P113 or P213. Let me explain the difference between these markings.

The framework of both systems is the same. This is a single-level frame made of standard metal KNAUF profiles hanging on suspensions. The crosshairs of the frame are connected single level connector"crab" type. The difference between the P113 and P213 systems lies in the types of sheets used for covering the ceiling.

The P113 ceiling uses KNAUF plasterboard sheets.
In the P213 ceiling, gypsum-fiber KNAUF supersheets are used for cladding.

Important! The frame structures of both types of ceilings are the same.

Ceiling structures P113 (P213)

Let's look at the P113 ceiling diagram. In listing the structural elements, I will indicate the need for materials for one square. meter of ceiling, which weighs 13 kilograms.

KNAUF sheets new marking: GSP-A/or H 2/or DF). Thickness 12.5 mm;
Metal profile PP (ceiling) 60/27: you need 3 meters;
Profile PN (guide) 28/27 – footage around the perimeter of the room + 10%;
Extension for profiles (if needed) 60x27;
Crab connector 60\27 – 2 pieces;
Ceiling suspension with clamp 60\27 – 1;
Suspension rod or straight suspension – 1;
Screw TN 25 -23 pcs;
Anchor – 1 piece;
Dowel K6/35 for fastening the guide profile (2 pcs per 1 meter of profile);
Painting tape – 1200 mm;
Putty – 400 g;
Primer – 100 gr.

Installation diagram

class="eliadunit">

The most large number The issues in installing suspended ceilings are the distances between the suspension fastenings and, as a result, the technological distances between the profiles in the frame structure. To this question, the answer is:

Maximum height of ceiling suspension (lowering): 1.1 meters;
Max. gap between supporting profiles: 0.5 meters;
Max. Gap between main profiles: 1.2 meters;
From the wall to the first main frame profile: 1.2 meters.

Note: The main profile is short sections of profiles between long supporting profiles. Load-bearing profiles, profiles to which plasterboard sheets are attached.

Where are P113 ceiling structures used?

The integrated system “Ceiling P113” is used in any premises. Depending on the type of room, the type of cladding sheet changes. So, for a normal room, a sheet of GSP-A is used, in damp room GSP-H2 sheet. In a flammable room GSP-DF.

Installation stages

I will list the main stages of installation (briefly):

Clear the ceiling of old structures;
Make markings for attaching hangers;
Attach the hangers to the base ceiling;
Assemble the frame, constantly checking the level of the frame;
Attach to frame KNAUF sheets(GKL) observing the offset of the sheets;
The seams between the sheets are puttied;
If necessary, the ceiling surface is completely puttied in 2-4 layers;
When ready, the ceiling is painted or decorated.

Electrical wiring performed behind suspended ceilings is considered hidden. It is carried out according to PUE standards for hidden wiring with the ability to replace it without dismantling the ceiling, in pipes or corrugation. For access to junction boxes, technical hatches are equipped. Recommended cable VVGng or imported analogues (NYUM). Electrical wiring is installed before the ceiling is installed.

You can download the instructions (Yandex.Disk)

Raster ceilings are found in public institutions. Most offices and institutions are finished with standard frame and square slab construction. Such systems are quickly installed and look good. Leading manufacturer building materials- the Knauf concern - also produces similar designs that are successful.

Characteristics of suspended structures

IN residential apartments Such ceilings are rarely used; more often raster systems are installed in offices, retail establishments, educational organizations and others public buildings. This is primarily due to fire safety requirements. Stretch ceiling will not save you in the event of a fire, and it is difficult to mount temperature sensors and automatic extinguishing equipment in it, while the office-style hanging system allows you to place fire safety systems.

The basis is a frame made of metal profiles, in which slabs of various materials. The quality of the slabs differs between different manufacturers. Materials from Knauf company are made from natural raw materials using modern technology. Therefore, the plates have the following properties:

Maintaining the original shape when high humidity, which allows them to be used even in swimming pools. The maximum bending of the plate guaranteed by the manufacturer is 2 mm at temperatures up to +35˚;
High light reflection – 92%;
Good noise absorption – sound reduction up to 40 dB;
Environmentally friendly, since the material is based on natural raw materials, unlike other boards containing formaldehyde components and asbestos;
The construction is lightweight, with a classic design;
Value for money, superior to analogues from other manufacturers.

Ceiling system Knauf P113

This is a set of products and materials designed for installing a single-level ceiling. It is based metal frame, which is not load-bearing element. The main profiles are attached with hangers to the ceilings, and the supporting profiles are the place where the plasterboard sheet is fixed. Main parts of the system:

plasterboard sheets;
metal ceiling profile;
metal supporting profile;
pendants.

A special feature of the Knauf P113 system is the location of the ceiling and guide profiles in the same vertical plane. The delivery set, in addition to the plasterboard sheet and profiles, includes necessary tools, components and recommendations for installation. The components of the system are manufactured according to modern technologies, with strict quality control. Structures made from HA sheets, assembled using the company’s technology, are reliable and durable.

The Knauf P113 ceiling system is used both during reconstruction and during the construction of new facilities. Solves the following tasks:

improves the decoration of premises;
hides unevenness of the base ceiling and communications;
increases sound insulation of rooms;
improves the fire situation.

Installation steps:

Marking on the floors for placing the frame;
Fixing frame elements on the ceiling;
Fastening plasterboard sheets to the frame;
Sealing joints between slabs, putty (complete or partial);
Primer of sheets for painting;
Painting sheets or applying decorative finishes.

Ceiling system Knauf AMF Ecomin Planet

New products of the concern, manufactured using modern technologies. In it high quality and elegant appearance are combined with a very reasonable price. The slabs included in the system are produced using modern equipment from mineral wool and coated with highly reflective dyes. Improves sound insulation in the room.

Specifications:

Knauf Danotile

New on Russian market building materials, presented by the Knauf concern, is the Danotile raster ceiling. The properties of the product allow it to be used in rooms with special hygienic requirements. Similar systems are successfully used in Europe in medical and children's institutions. The products meet European quality standards. In Russia, the certification stage has also been passed and documents on safety and proper quality have been received.

The Danotile ceiling complements the Knauf line of similar products. The basis is fiberglass covered with a gypsum layer with a film coating. The film prevents getting wet and damaged. Unexpected leaks are not a problem for slabs, nor is the formation of condensation.

The Danotile surface is not wipeable and is resistant to alkali solutions and acids. Such properties allow frequent wet cleaning of the ceiling using detergents and cleaning with hard brushes.

Technical characteristics of Danotile from Knauf

Tiles for installation suspension system are manufactured with the following parameters:

Dimensions: 0.6 x 0.6 m, 1.2 x 0.6 m, 0.625 x 0.625 m;
The thickness of the slabs is 6.5 mm, 9.5 mm and 12.5 mm, respectively;
Color – white;
Light flux reflection coefficient - 85.3%;
The weight of one slab is 6.2 kg per m²;
The weight of the assembled structure is 7.5 kg per m²;
Moisture resistance - maintaining the configuration and appearance at a relative humidity of 91.0% and a temperature of 30 degrees Celsius;
Temperature range – preservation of properties up to 55 degrees.

Knauf suspended ceiling is a whole set of materials and components suitable for finishing premises of any purpose, both commercial and residential. German-made structures are presented in the form of plasterboard sheets different types for installation on a wooden sheathing or a standard metal frame based on components of the same brand.

The knauf system opens up almost unlimited possibilities for implementation design ideas and can be implemented as in simple version based on one level, and in a more complex one - with two or even three levels.

Digital indexes of systems - what are they for?

For the convenience of consumers, the manufacturer has developed its own ceiling division system marked with digital indices. You can choose from the following options:

P 112 - the kit consists of two parts of a metal frame.
P 113 - the system is based on a single-level frame.
P 212 is a base based on two levels with gypsum sheets and components for installation included in the kit.
P 213 is an analogue of the previous set, with the exception of two options for profiles for the frame.
P 211 - ceiling with wooden lathing, fixed to a concrete floor finished with gypsum plasterboard.

All of the above options are collected according to Knauf technologies, including with your own hands, according to a certain algorithm.

How to assemble a Knauf plasterboard ceiling: main steps

For those wishing to install systems without the participation of craftsmen, the company has developed step by step instructions with a whole range of useful brochures describing the details of the process. But before moving on to installation, you need to decide on the choice of gypsum boards.

It all depends on the room where the ceiling will be installed. If this is a room with increased level humidity, then you need to choose special moisture resistant sheets with marking GSP-N2 and characteristic green. Both regular and moisture-resistant plasterboard sheets are quite light and durable, have the ability to allow air to pass through, and help maintain a comfortable microclimate in the room.

Installation of Knauf sheets is carried out in several stages:

Markings are carried out on the surface of the walls and ceiling. To do this, determine the lowest corner in the room, put a mark and mark the remaining points along the perimeter from it, connecting them with a horizontal line. This line will become the main one for securing the guide profile.
The next stage is the installation of ceiling profiles in the guides. Here you need to correctly calculate the distance, taking into account that the plasterboard sheets will be attached in 15 cm increments to avoid sagging. At the same stage, mineral wool is laid in the inter-ceiling area to increase the level of sound insulation.
The finished frame is sheathed with gypsum board. Considering the considerable weight of the sheets, it would be correct to do this together, using galvanized (corrosion-proof) screws and a screwdriver to speed up the process.
After fixing the gypsum board, the joining seams are treated with gypsum putty from the same manufacturer, complete with reinforcing tape for strengthening.

The final stage is painting or pasting the surface of the suspended ceiling.

Self-installation of the Knauf suspension system - basic requirements

There are certain conditions that must be observed by anyone who decides to install a knauf suspended ceiling on their own.

One of the main ones is the installation time. This must necessarily be a period when others finishing work in the room are completed, a stable microclimate and temperature have been established.

The process must be carried out in accordance with the documentation accompanying the kits ceiling structures. Drywall sheets must undergo acclimatization for several days before installation.

To fasten the sheets, screws are screwed in at an angle of 90 degrees, penetrating into the metal frame to a depth of 10 mm and wooden frame to a depth of up to 20 mm. If the screws become deformed during installation, they must be replaced with new ones.

To treat coating seams, optimal temperature and humidity conditions are maintained. During the period of work and two days after its completion, the temperature should not fall below 10 degrees.

Sudden temperature changes or drafts in the room will lead to a decrease in the quality of seam processing. To increase strength, special reinforcement tapes and proven Uniflot or Fugenfuler mixtures are used. The first is more plastic and elastic, while the second is resistant to moisture.

Processing of seams occurs in the following sequence: the mixture is applied to a spatula and the seams are filled with the main putty layer. A tape is applied on top of the first layer, after which a subsequent leveling layer is applied. Additionally, putty the places where the sheets are attached using grinding devices for finishing.

Working certain requirements and in relation to the final finishing of the canvas. Before processing, the gypsum board must be puttied with finishing paste, achieving the formation of a perfectly smooth surface. Paint or wallpaper are suitable as finishing materials. If this is the first option, then it is better to use water-dispersed types. It is more convenient to apply the compositions with a roller or a special compressor.