A phone stand can be made from the most unexpected materials. We have prepared for you the most interesting ideas and master classes with photos and videos, with the help of which you can easily make this useful accessory with your own hands. Stands made from paper clips, a sheet of paper, corks and other simple things - everyone will find suitable option for your phone.
Previously we told you how to make a popsocket. This is also a kind of phone stand. We recommend you look at this collection of ideas.
Paper clips
Using paper clips, you can make a great DIY phone stand in just a minute. This is very convenient when you need to watch something during any other activity, but you don’t have a popsocket or any other stand at hand.
We will need:
- any cardboard;
- 2 clamps.
Just attach them on both sides and the stand is ready. The phone will be firmly fixed in the “ears” of the paper clips.
This device can be used as a tripod. The holder is useful for taking group photos when you have nothing at hand.
Shell
You don't even need special instructions here. The main thing is to find a suitable shell from which you will make a phone stand. It should be big enough.
You will also need liquid nails or rubber glue that hardens into an elastic, plastic mass. If this is not available, you can use acrylic plasticine - it will not stain anything.
To make a phone stand, you need to apply a layer of this glue to the place where the gadget will come into contact with the surface of the shell. If it is not stable, glue can be applied to the bottom to firmly fix it.
Such homemade stand for a mobile phone it looks very beautiful and will fit into any interior.
Beautiful jar
The simplest stand for a mobile phone you can make it from a regular can. The main thing is to choose suitable size and design.
Choose a jar into which the phone fits freely and does not tip over under its weight. If the source doesn't look too pretty, arm yourself acrylic paints. With their help, you can make a beautiful phone stand with your own hands. Paint it in an original way, add splashes or patterns, or any inscription.
You can decorate the jar with twine or braid.
Wine corks
Don't throw away wine corks - this is a great material for creativity! They make just a great stand for your smartphone. Durable, environmentally friendly, beautiful, comfortable.
We will need:
- 20 wine corks;
- superglue;
- lace;
- leg-split;
- any decor.
Glue the corks together in columns and in a row. First, assemble the pieces for the back wall. Then glue the front completely. The bottom of the stand is glued gradually. Place the plugs against each other one at a time. Then lean back wall.
For beauty, you can add lace, thin twine or floss threads and any cute little things.
Bamboo chaise lounge
Very interesting option phone stands - homemade mini chaise lounge. It looks creative, and you can make it at home in just a few minutes.
We will need:
- bamboo mat;
- bamboo sticks;
- 6 coffee sticks;
- any paint;
- wire cutters;
- glue gun
Watch this short video master class in which the author shows step by step how to make original stand for a mobile phone with your own hands. The result is a bright, stylish accessory that can be used to decorate your desktop or even give as a gift to someone.
Origami
How do you like the idea of making a phone stand out of just paper? Previously, we told you in detail about the origami technique and its basic principles. We recommend reading our material on this topic, especially if you are a beginner.
For this craft you only need a sheet thick paper.
Watch the video tutorial in which the author makes a cool stand for his phone or tablet with his own hands. Repeat after him - it's quite simple. This accessory can be easily made in an office, university or school to use a mobile phone for reading or watching videos.
Simple and beautiful
The simplest phone stand without glue can be made not only from paper clips. You will need a plastic mayonnaise bucket and scissors, and the rest is a matter of taste. It is better to choose the most dense base so that the phone is securely fixed.
Step-by-step master class shown in the video below. You can decorate the craft with acrylic paints, markers, stickers, glitter and anything else.
We hope you were able to choose suitable master class to make a useful accessory for your phone. Each of them can be modified, improved or customized. Your coasters will turn out beautiful, original and very comfortable.
Views: 486
It happens that in some places there is not always a stable connection, in my case the Beeline operator, since the tower is located far away and nearby trees prevent it from transmitting a signal easily. I didn’t want to make any kind of antenna for the phone, I came up with a simpler one, this is a stand for the phone, which could be placed in the place where the connection is stable and does not depend on weather conditions. And I’ll tell you how to make a phone stand in this article.
As with any other homemade product, we need to decide necessary materials.
To make this stand you will need:
* Parquet.
* Board 8cm wide.
* Epoxy glue.
* Threads, matches.
* Black felt.
* Hacksaw on metal.
* Drill and drill bits for it with a diameter of 3 and 6 mm.
* Coarse and fine-grained sandpaper.
* Screw 55mm long.
These are all the materials we need, which are not difficult to obtain, and if there is no parquet, then any strong board will do.
Now you can begin the gradual production of the stand.
Step one.
The first step is to determine the dimensions of the future stand; to do this, measure the dimensions of the phone that you want to install in the stand in the future, and don’t forget to measure the thickness.
In my case, the thickness of the phone turned out to be quite large for the current time; after all, 1.5 cm is not small for a phone in 2017, but all this takes into account the fact that the phone has a protective bumper.
For convenience, we make a drawing on paper or in a program, as I did.
Step two.
After you have decided on the size of the stand, you can take up the tools and cut out the main part. The basis of the stand is its so-called back, the dimensions of which are 8*9cm. We take the thickness of the base to be 5 mm, no more and no less, since we don’t want the stand to be heavy or too fragile due to lack of thickness. To do this, I sawed an already cut 8*9 board across, reducing the thickness from 18 to 5 mm.
Now you need to drill a hole to attach the stand to the wall, first drill with a 3mm drill, then 6mm, but not all the way through, in order to hide the screw head. Then we round the corners with sandpaper.
Step three.
When the base is ready, you can start making the legs, which, due to their design, will prevent the phone from falling.
It seemed to me best to make the paws from the parquet that I found in my garage.
At first it was planned that the legs would be composite, that is, assembled from two parts.
But due to the loss of strength with such a connection, I decided to make them solid. The result is a foot in the shape of the letter G.
In my design there are three such legs.
Step four.
At first of great importance I didn’t give any attention to the appearance, but as production progressed I realized that all the sharp edges needed to be rounded, which is what I did.
It is best to round off sharp edges with coarse sandpaper. Once the desired result is achieved, sand with a finer grit to remove all burrs.
Also, do not forget to sand the main part, since the surface of contact with the phone should be smooth.
Step five.
After all the component parts have been sanded, you can proceed to attaching them to the base.
For these purposes, epoxy glue is best suited, which I have tested several times and has proven itself to be highly durable.
Using matches, mix the required amount of epoxy glue one to one and apply it to the places where the paws will be installed.
Epoxy glue takes a long time to dry, but you simply don’t have the patience to hold the parts being glued together with your hands for a long time. Without thinking twice, I decided that the easiest way to fasten such a structure was with thread and matches, wrapping a dozen turns around its edges. Because of large quantity turns of thread, everything is held securely, and most importantly, the parts are pressed tightly enough.
First we glue the bottom foot in the middle, and then the two side ones.
I had to tinker a little with the side ones, in this case it was better to ask a friend to help, since two hands were clearly not enough to hold two parts, and also to wrap it all around with thread.
Leave everything until completely dry.
Step six.
The epoxy glue has dried and despite the fact that the width of the contacting plane is only 5 mm, the paws hold on very tightly.
Mobile phones have become an integral part of our daily life. Even children already use them from the very first grades of school. In order not to simply leave your gadget on the table, let's look at how to make a phone stand from scrap materials.
First option: from binders
Let's figure out how to make a phone stand with your own hands from something that is found in almost every home. There are quite a lot of ways. In this master class we will make it from binders (paper clips).
This model is well suited for widescreen phones. It will turn out to be very convenient and practical, and it will take literally two minutes to create.
To work you will need binders and a suction cup.
Manufacturing procedure:
- Connect the binder with a suction cup (a towel holder will also work) in the place where the hook is located.
- This suction cup is what you attach to the back of your phone when you need to put it down, and you're done.
The advantage of this type is that the phone can be placed in any position, both horizontally and vertically, or at an angle.
Second option: made of paper
When you have a lot of pieces of paper of different colors at hand, the modular origami technique comes to mind. Let's figure out how to make a phone stand out of paper.
To work you will need 24 white ticks and 23 pink ones. Checkmarks are the simplest element of modular origami.
To make modules, do the following:
- The triangular module is folded from rectangles, so that they are the same size, take an A4 sheet and cut it into 16 or 32 small rectangles.
- Fold the rectangle in half.
- And in half again, then straighten it so that you get a fold line in the middle.
- Bend the edges of the rectangle to this line, including those where the first fold line goes.
- You have a protrusion at the bottom; bend its corners up to the edge of the first part.
- Now fold the remaining bottom sheet upwards to create a reverse side straight triangle.
- Fold it in half. And you will see that you have pockets on both sides.
Now let's move on to our question, how to make a phone stand from the following modules:
- Stick white checkmarks in a circle.
- Then place pink ones between each pair. This will give you a tapering cone.
- Continue assembling the structure to the desired height and you're done.
This method is suitable for those who like to work with paper using the modular origami technique; if you prefer to cut and stick everything, then pay attention to the next model.
Third option: from a shampoo bottle
How to make a DIY phone stand from a shampoo bottle? The work will turn out very stylish, despite simple materials, it will look expensive, as if purchased.
Manufacturing progress:
- Choose a suitable size shampoo bottle.
- Make a line in the middle and cut along it. For convenience, it is better not to make it straight, but to leave a protrusion with a slot on the back side so that you can not only install the stand on the table, but also hang it on the wall.
- Take beautiful paper with an ornament (you can use wrapping paper), wrap it around the stand and glue it.
- Carefully trim the excess wrapper along the outline. Your work is ready.
This craft will look great in your home, especially if you choose the right color and pattern of wrapping paper. You can come up with a form for such work yourself or make one based on a sample. This was one of many ways to make a phone stand.
Fourth option: from popsicle sticks
One of the most original options How to make a phone stand is to use Popsicle sticks. To do this, ask your friends and relatives in advance not to throw away such sticks.
When you have collected enough, you will need to glue them together:
- first make the bottom;
- then the backrest at the height of the phone;
- the side ones will look good at an angle.
You can connect parts not only with glue, but also by gluing a transverse stick for greater strength.
There are many ways to make a phone stand from scrap materials. We've only looked at a few of them. It all depends on your mood and imagination. Even from an old Lego constructor you can make great option or sew a wonderful wall cover from thick fabric.
Use any idea. Happy creativity!
Mobile communication devices are found in every home; they have become almost indispensable for modern man and perform many functions. Therefore, quite often they need to be kept not in your pocket, but on the desktop, so a stand for a smartphone necessary thing for everyone. There are many ways to make a phone stand, but one of the most best options This is, of course, wood, since, despite its hardness, it will not scratch the smartphone and will look good both in the office and on the table at home.
Most easy way How to make a phone stand with your own hands from wood is just to make it from an ordinary plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is already ready. Since the board has a large plane, after you put your mobile phone in the slot, it will stand firmly and securely on the table.
The most important thing in this wooden phone stand is the base area that will be in contact with the table; it must be large enough to cope with the functional load. As a base, such a homemade phone stand can have any wood and can be given any shape. But the manufacturing process itself is limited to the fact that a groove is simply made in the board using a router. The groove can be made flat or sloped, depending on the angle at which the device should be positioned.
When you make your own smartphone stand, it is important to sand it well, especially in the groove area where the mobile will sit. After all, if there are irregularities, you can scratch the glass, and this will ruin appearance your gadget.
Complex design
If you want your mobile device was always in sight, did not get lost in documents, and at the same time your table looked beautiful and solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don’t worry, you don’t need a lot of tools or material for this either. The most important thing is not to rush and carefully think through the design that your homemade product will have.
A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small planks.
The design of such a stand is as simple as possible; two identical wooden blanks are taken rectangular shape. On one side, approximately a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not go at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both workpieces, a slot is made up to half the width of the workpiece.
For someone just starting to work, it may be difficult to choose correct angle for the slot. But this is not difficult to do, just attach two parts to one another at the planned angle and simply make marks on the side at the end. Well, in addition, to prevent the phone from slipping, you need to make a groove on a horizontal board, or glue a small strip that will be a stopper.
After all the slots are ready, you just need to sand the stand well so that the bumps don’t scratch the phone’s body, and cover it with tinting or just varnish.
There are many ways to make a phone stand of this design; for example, you can make the vertical part of the stand shaped, which will significantly improve its appearance. The shapes can be a wide variety of hands, leaves, animals and in general anything you can think of, since a tree can be given almost any shape.
How to choose a stand design
There are quite a few ways to make a smartphone stand, but wooden options are not only durable, but also beautiful view. In addition, they look much more noble than other materials, since a properly selected wooden accessory will decorate any design, regardless of its style.
Therefore, to make your handmade mobile phone stand beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it may simply be damaged.
You can make a variety of phone accessories at home and you don’t need to have a special tool to do this. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home this will also be easy.
Don’t be afraid to experiment and imagine so that the stand you make is unique and not like everyone else’s. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly varied things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores; you can only order them or make them yourself. The second option is much better, not only in terms of savings, but also in terms of showing individuality.
Even if you do not have experience in making any crafts from wood, do not be upset, as there is nothing complicated about it. It is enough to plan everything carefully, calculate what tools and materials will be needed, and only then begin the work itself. If something doesn’t work out for you, you can try again, rarely does anyone manage to do everything correctly the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do everything right.
Having cute, cozy touches in your home helps create a warm atmosphere. Making something interesting and useful at the same time is not so difficult. Today, almost everyone has a mobile phone. When we return home, we most often put it on the table. It happens that we don’t notice and throw papers or other things on top, and sometimes we even lose them on the desktop. A DIY phone stand solves two problems at once: you will forever be able to allocate a place for your phone and develop the design yourself.
How to make a phone stand?
Surely you have at least one at home carton. From such waste material you can create something unique. We suggest making a phone stand from paper and an old box.
- To work, you need to prepare office glue, a pencil with a ruler, and a knife.
- Before you make a phone stand, you need to prepare the cardboard. Cut rectangles measuring 10x20cm. We will need 9 such blanks.
- Now you need to glue them together in threes.
- On two we draw such a detail. This will be the side of the DIY phone stand.
- Cut it out. In order for everything to be beautiful and the structure not to lose stability, you need to put the sidewalls one on top of the other and check how similar they are.
- Let's take it stationery knife and cut a hole in the shape of a rectangle.
- Next, you need to make the base for the phone stand with your own hands. We measure the width of the phone and cut out a stand to fit the size of the third piece. The width of the phone is the length of our rectangle. The width of the rectangle should be such that it can fit into the grooves on the sides.
- We assemble the structure. You will also need a small circle made of cardboard, its diameter is slightly less than the distance between the sides. (photo 8)
- All blanks must be covered with paper. This could be a newspaper clipping or scrapbooking paper.
- To make the back, take two pencils or something similar. We make holes in the sides and insert them there. We put our cardboard circle on the axle.
- Your DIY mobile phone stand is ready!
Another DIY phone stand option
You can make a simpler version of this stand from cardboard.