Require the creation of conditions for the performance of professional duties, including the provision necessary equipment, equipment, workplace that complies with sanitary and hygienic rules and regulations, etc. 4.5. Require the management of the organization to provide assistance in the performance of their professional duties and the exercise of rights. 4.6. Get acquainted with draft decisions of the organization’s management relating to its activities. 4.7. Improve your professional qualifications. 4.8. [Other rights provided for by labor legislation Russian Federation]. 5. Responsibility Controller measuring instruments and automation of the 5th category is responsible for: 5.1. For non-fulfillment or improper fulfillment of the duties provided for in these instructions - within the limits determined by the labor legislation of the Russian Federation. 5.2.
Error 404 page does not exist
For offenses committed in the course of carrying out their activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation. 5.3. For causing material damage to the employer - within the limits determined by the current labor and civil legislation of the Russian Federation.
The job description has been developed in accordance with [name, number and date of document].
Instrumentation and automation adjuster
Industrial television equipment, electronic engraving machines - adjustment. 4. Telecontrol equipment for contactless and relay systems - setup and adjustment.
5. Ultrasonic industrial equipment and flaw detection of medical equipment, photo telegraphs - adjustment. 6. Blocks on semiconductor devices - adjustment. 7. Blocks, units of complex chemical-thermal and electric-vacuum equipment - adjustment.
8. Vibration stands with electronic system controls - adjustment, checking. 9. Relay protection - adjustment. 10. Machines, automatic recording devices, electrical and electronic - adjustment and testing.
11.
Attention
Automated washing machines - repair and adjustment of software devices. 12. Open hearth furnaces, hardening furnaces, induction furnaces - adjustment of automation circuits.
Oxygen and pyrometric devices - adjustment and testing. 14. Corrective and software devices - adjustment.
Instrument technician: what kind of profession, ranks, training
Info
Industrial gas installations (oxygen, hydrogen and acetylene stations) - adjustment of equipment, automation and circuits. 12. Electrical circuits - oscillography of current and voltage.
Instrumentation and automation adjuster, 5th category. Characteristics of work. Setting up automatic control devices and installations of medium complexity with a summing mechanism and remote transmission of readings.
Adjustment, testing and delivery of medium-complexity units and power systems for electronic computing and control machines, instruments and information-measuring systems. Examination electrical parameters adjustable equipment using all kinds of control and measuring instruments.
Drawing up prototype diagrams for regulating and testing complex mechanisms, devices, and systems.
Etc. instrumentation and automation adjuster (5th category)
Autonomous and comprehensive adjustment of electrical, pneumatic, hydraulic control and protection systems, computer equipment, automated systems regulation with “P” and “I” regulation law. 7th category. Characteristics of the work. Pre-installation check, autonomous and comprehensive adjustment of complex devices and equipment automatic control, regulation and management.
Important
Pre-installation testing and regulation of autoregulators, automatic analyzers of the composition of liquids and gases, electronic equipment, oxygen meters, electronic level meters, sensors of radiation monitoring systems, equipment containing radioactive substances. Autonomous and comprehensive adjustment of control and protection systems based on contactless devices.
3.
The adjuster of instruments, equipment and automatic control systems (instrumentation and automation adjuster) (hereinafter referred to as the Worker) is classified as a worker. 1.2. Real job description defines functional responsibilities, rights and responsibilities of the Employee when performing work in their specialty and directly at the workplace in the "" (hereinafter referred to as the Employer).
1.3. An employee is appointed to a position and dismissed from a position by order of the Employer in the manner prescribed by current labor legislation. 1.4. The employee reports directly. 1.5.
Level 5 instrumentation operator job description
Industrial gas installations (oxygen, hydrogen and acetylene stations) - adjustment of equipment, automation and circuits. 3.12. Electrical circuits - oscillography of current and voltage.
3.13. Automation of power supply, pressure and temperature - adjustment and testing. 3.14. In-plant dispatch communication equipment for radio stations and intercoms - setup and adjustment. 3.15. Industrial television equipment, electronic engraving machines - adjustment. 3.16. Telecontrol equipment for contactless and relay systems - setup and adjustment. 3.17. Ultrasonic industrial equipment and flaw detection of medical equipment, photo telegraphs - adjustment. 3.18. Blocks on semiconductor devices - adjustment. 3.19.
Blocks, units of complex chemical-thermal and electric-vacuum equipment - adjustment. 3.20. Vibrating stands with an electronic control system - adjustment, testing.
3.21.
Instrumentation and A with a lower category; 5.19 be able to use all laboratory and standard instruments, stands necessary for the production of work and follow the rules of their operation; 5.20 treat tools, standard and calibration instruments with care; 5.21 do not make any experiments and changes in SBS circuits ;5.22 consider tasks related to the repair of SBS completed after: - completion of the work is documented by the relevant entries of the work manufacturer in the “Logbook” Maintenance SBS”, passport for SBS, form of gas alarm; - gas detectors have been verified with appropriate documentation; - the work order has been fully completed and closed - admission; - the SBS commission has been tested and act 5.23 has been issued. Constantly improve your professional level, learn new equipment.
Failure to comply with orders, instructions and instructions of the Employer. 4.4. Violation of safety rules and labor protection instructions.
Failure to take measures to suppress identified violations of safety, fire and other rules that pose a threat to the activities of the Employer and its employees. 4.5. Failure to comply with labor discipline. 5. WORKING CONDITIONS 5.1. The Employee’s work schedule is determined in accordance with the internal labor regulations established by the Employer. 5.2. Due to production needs, the Employee is required to go on business trips (incl.
local significance). The job description was developed on the basis of (name, number and date of the document) Head of the structural unit (initials, surname) (signature) » » g. Agreed: legal service (initials, surname) (signature) » » g.
B) 16 PUE Rules for the installation of electrical installations 17 T-29 Instructions for organizing safe traffic Vehicle and pedestrians on the territory of the joint-stock company18 Regulations on the system of organizing work on operation, maintenance and checking the serviceability of SBS (locking and alarm systems)19 Instructions on safety measures when working with methanol at enterprises and organizations of MNHP20 Regulations on the delimitation of functions for metrological support of production between workshops and divisions of JSC21 Regulations on the management system industrial safety and labor protection in JSC 4 QUALIFICATION REQUIREMENTS: 4.1 Level of required professional training of the employee. An instrumentation mechanic must have a document on specialized education or undergo training at the enterprise by a course method according to a program agreed with Rostechnadzor.
An adjuster of instrumentation and automation must know: - the principles of establishing operating modes of individual devices, instruments and units; — principles of regulation of blocks of medium complexity and stabilized power supplies; — principles of encoding and decoding in telemechanics systems; — techniques for setting up digital tracking systems; — design, purpose and principle of operation of complex mechanisms of radio systems and devices; — methods and methods of electrical, mechanical and complex adjustment of complex devices and the technological sequence of adjustment; — prototyping of complex circuits with processing of their elements; — fundamentals of mechanics. 2. PROFESSIONAL RESPONSIBILITIES 6. The adjuster of instrumentation and automation is charged with: 6.1. Setting up automatic control devices and installations of medium complexity with a summing mechanism and remote transmission of readings.
Women's Issues Never do this in church! If you are not sure whether you are behaving correctly in church or not, then you are probably not acting as you should. Here is a list of terrible... Christianity What happens to the body of a person who does not have sex? Sex is almost as basic a need as eating.
At least once you start doing it, you won’t stop. Even if you adhere to...
Unified Tariff and Qualification Directory of Work and Professions of Workers (UTKS), 2019
Part No. 2 of Issue No. 2 of ETKS
The issue was approved by Resolution of the Ministry of Labor of the Russian Federation dated November 15, 1999 N 45
(as amended by Order of the Ministry of Health and Social Development of the Russian Federation dated November 13, 2008 N 645)
Instrumentation and automation adjuster
§ 53. Instrumentation and automation adjuster, 4th category
Characteristics of work. Adjustment of simple electronic thermal devices, automatic gas analyzers, control and measuring, electromagnetic, electrodynamic, counting and analytical mechanisms with adjustment and fine-tuning of parts and assemblies. Adjustment of control circuits for contact-relay, ion, electromagnetic and semiconductor electric drives. Adjustment, testing and delivery of elements and simple electronic units with characterization. Drawing up and prototyping of simple and medium complexity circuits.
Must know: device, operating principle and methods of setting up the equipment being serviced; technical conditions for operation; rules for characterization during testing; the design and principle of operation of radio tubes, triodes, semiconductor diodes, transistors and their main characteristics; methods and methods of electrical and mechanical adjustment of elements and simple electronic units computers, gain generation principle; rules for receiving radio waves and setting up stations of medium complexity; purpose and use of instrumentation (oscilloscope, standard generator, cathode voltmeter, etc.); rules for taking measurements and drawing up graphs based on them; fundamentals of electrical engineering, electronics and radio engineering in the scope of the work performed.
Work examples
1. Automation in the gas industry - adjustment.
2. Automatic power supply units, contactors, limit switches, protection and interlocking elements - checking operation.
3. Blocks, units and devices of chemical-thermal and electric-vacuum equipment - regulation.
4. Tube generators - adjustment with selection of screen voltages, removal of graduated frequency curves of circuits with power measurement.
5. Loop oscilloscopes - medium repair and adjustment.
6. Electrical converters - circuit assembly, adjustment and elimination of defects.
7. Counting devices - regulation of units.
8. Simple receivers with four to six stages - tuning with frequency response readings.
9. Selsyns - regulation and coordination in the station diagram in accordance with technical specifications and instructions.
10. Metal-cutting machines, electric drives for shut-off and control devices of all types - simple adjustment of the automation circuit.
11. Industrial gas installations (oxygen, hydrogen and acetylene stations) - adjustment of equipment, automation and circuits.
12. Electrical circuits - oscillography of current and voltage.
§ 54. Instrumentation and automation adjuster, 5th category
Characteristics of work. Setting up automatic control devices and installations of medium complexity with a summing mechanism and remote transmission of readings. Adjustment, testing and delivery of medium-complexity units and power systems for electronic computing and control machines, instruments and information-measuring systems. Checking the electrical parameters of adjustable equipment using all kinds of instrumentation. Drawing up prototype diagrams for regulating and testing complex mechanisms, devices, and systems.
Must know: principles for establishing operating modes of individual devices, instruments and units; principles of regulation of medium complexity units and stabilized power supplies; principles of encoding and decoding in telemechanics systems; equipment for setting up digital tracking systems; design, purpose and principle of operation of complex mechanisms of radio systems and devices; methods and methods of electrical, mechanical and complex adjustment of complex devices and the technological sequence of adjustment; prototyping of complex circuits with processing of their elements; fundamentals of mechanics.
Work examples
1. Automation of power supply, pressure and temperature - adjustment and testing.
2. In-plant dispatch communication equipment for radio stations and intercoms - setup and adjustment.
3. Industrial television equipment, electronic engraving machines - adjustment.
4. Telecontrol equipment for contactless and relay systems - setup and adjustment.
5. Ultrasonic industrial equipment and flaw detection of medical equipment, photo telegraphs - adjustment.
6. Blocks on semiconductor devices - adjustment.
7. Blocks, units of complex chemical-thermal and electric-vacuum equipment - adjustment.
8. Vibration stands with an electronic control system - adjustment, testing.
9. Relay protection - adjustment.
10. Machines, automatic recording devices, electrical and electronic - adjustment and testing.
11. Automated washing machines - repair and adjustment of software devices.
12. Open hearth, hardening, induction furnaces - adjustment of automation circuits.
13. Oxygen and pyrometric devices - adjustment and testing.
14. Corrective and software devices - adjustment.
15. Radio units - connecting the unit to the electrical network in a circuit with a power supply, adjusting the wavelength of the high-frequency part, removing the mode by DC, radio frequency gain check.
16. Computer systems - adjustment.
17. Metal-cutting machines of varying complexity and program-controlled, flexible equipment technological processes- setting up automation.
18. Television and electronic-mechanical plotters - adjustment.
19. High and low frequency amplifiers (two to five amplification stages) - adjustment with adjustment and adjustment of all parameters of incoming radio tubes, adjustment of local oscillator circuits and equalization of the frequency band in band-pass amplifiers and cut-off filters, adjustment of resonance, reading and plotting frequency characteristics.
§ 55. Instrumentation and automation adjuster, 6th category
Characteristics of work. Adjustment, testing and commissioning of complex circuits of industrial automation, telemechanics, communications, electronic-mechanical testing and electro-hydraulic machines and stands equipped with information-measuring systems. Setting up cash counting machines with electronic counters and reject conveyors for checking and counting coins of different denominations. Comprehensive testing of an electronic computer control system with a testing machine. Adjustment and testing of circuits of electronic computer control machines. Drawing up schematic and wiring diagrams for adjusting and testing complex and prototype models of mechanisms, devices, systems. Development of setup methods and connection diagrams for adjustable equipment with instrumentation and power supplies. Adjustment and testing of equipment and units of radio stations, direction finders, radar installations and automatic electronic equipment.
Must know: technology for assembling equipment units of any complexity; design, circuits and principles of operation of electronic counters of cash counting machines, rejection conveyors, counting and summing and computing control machines; methods and methods for setting up various electrical units and complex regulators; methods for calculating individual elements of control devices; rules for preparing delivery technical documentation; basics of telemechanics within the scope of the work performed.
Secondary vocational education required.
Work examples
1. Complex automation of industrial installations for the production of oxygen, argon, hydrogen, acetylene and other gases - comprehensive setup.
2. Medical electronic equipment - adjustment.
3. Radio-electronic equipment, generators of all types, electronic oscilloscopes, complex non-contact telecontrol systems - adjustment with detection and elimination of damage.
4. Ultrasonic equipment is complex - adjustment.
5. Light-photometric, magnetoelectric, optical-acoustic gas analyzers - adjustment.
6. Gas cutting machines with program control - adjustment.
7. Experimental samples of equipment for the manufacture of electronic products - adjustment.
8. Optical radiation pyrometers and potentiometers - adjustment and testing.
9. Metal-cutting machines and machine tools with program control, equipment for flexible technological processes - setting up automation.
10. Test installations - adjustment.
11. Industrial television installations - setup.
§ 56. Instrumentation and automation adjuster of the 7th category
Characteristics of work. Setup, adjustment and commissioning of complex systems of devices and equipment control systems based on microprocessor technology with the implementation of restoration and repair work on elements of these systems, programming controllers, micro- and mini-computers and other equipment of electronic computers, ensuring their output to the specified operating parameters. Diagnosis of equipment control systems using special test programs.
Must know: basic principles of constructing control systems based on microprocessor technology, functional and structural diagrams of programmable controllers, micro- and mini-computers; design of microprocessor devices; basics of programming and theory of automated electric drive; methods of introducing technological and test programs; methodology for setting up systems in order to obtain the specified static and dynamic characteristics of devices and devices of converter technology; installation of basic instrumentation and diagnostic equipment created on the basis of microprocessor technology; methods and organization of building “memory” in control systems; methods for setting up electronic units various devices, methods for calculating individual rigged devices; rules for preparing delivery technical documentation.
Secondary vocational education required.
§ 57. Installer of instrumentation and automation of the 8th category
Characteristics of work. Comprehensive setup, adjustment and commissioning of complex and unique systems devices and control systems of equipment based on microprocessor technology with the implementation of restoration and repair work on these systems, programmable controllers, micro- and mini-computers and other equipment of electronic computers, as well as peripheral equipment and their diagnosis using test programs and stands using computer facilities. Setup, repair, adjustment and commissioning of digital electric drives using “intelligent” sensors. Development of non-standard boards for control systems. Drawing up test corrections of technological equipment programs. Analysis, systematization of failures in the operation of technological equipment and development of recommendations for their elimination. Adjustment and repair of radio interference suppression devices for frequency generators with power over 1 kW. Recalculation of electronic devices to domestic denominations. Drawing up the necessary diagrams for setting up and repairing devices. Repair and adjustment of electronic units in ultrasonic installations.
Must know: methods for constructing control systems based on microprocessor technology; circuit diagrams programmable controllers, micro- and mini-computers; methods for correcting technological and test programs; organizing a set of works on setting up and troubleshooting devices and computer systems; design and diagnostics of unique measuring and control systems and complexes; theory of automatic control; the main programming “languages” used in specific technological equipment; diagrams and principles of operation of electronic devices that suppress radio interference, rules for drawing up technical acceptance documentation; basics of telemechanics within the scope of the work performed.
Secondary vocational education required.
The profession of a mechanic who deals with control and measuring instruments is becoming more and more relevant every day. What is the reason? This will be discussed further.
Who is an instrumentation engineer?
Almost any enterprise has many different instruments, sensors, meters and other technical devices. All such equipment must be monitored by someone. An instrumentation and automation engineer is the very specialist who is able to control the safe and efficient work all devices available in production. Thus, a professional is obliged to carry out periodic inspection of equipment, its high-quality repair or replacement.
It’s worth noting right away that the profession in question is not so simple. After all, a competent specialist must have a fairly wide range of knowledge, skills and abilities. Without all this, you will not be able to carry out your work functions efficiently.
What should an instrumentation and automation engineer know?
The profession has as many as seven categories, and therefore the knowledge of specialists with different qualifications can differ significantly. However, it is worth highlighting the most basic points that are enshrined in the employee’s special job description. Here are some of them:
- fundamentals of technological methods of metalwork production;
- device of the working tool and its purpose;
- techniques, methods and means of working with springs in a hot or cold state;
- methods of performing plumbing work;
- basics of electrical installation work;
- basics of connecting wires;
- properties of materials for tinning;
- basic safety precautions, methods and means of protection during work.
And much more. It is also worth citing the basic practical skills that an employee must have. Among them:
- performing metalworking;
- competent use of tools;
- high-quality soldering;
- elimination of defects, etc.
Thus, an automation mechanic must have a fairly large stock of knowledge and skills. Moreover, this employee must constantly develop his knowledge and skills. After all, progress does not stand still, but work equipment is constantly being improved.
Rights of an instrumentation and control equipment operator
The specialist in question, like any other officially working person, has a certain range of rights. What are these rights? How and when can they be implemented? The instrumentation and automation engineer, according to a special job description, has the right:
- constantly improve your skills and professional skills;
- demand from management the documents or tools necessary for work;
- arrange all necessary benefits or social guarantees;
- receive in a timely manner wages in full size;
- propose to superiors various kinds of ideas or plans for improving the organization.
Above, only the most basic rights that the specialist in question has were mentioned.
Responsibility of the instrumentation and control equipment operator
An instrumentation and automation mechanic has not only rights, but also a certain amount of responsibility for some of his actions. What does the special job description stipulate in this case? Here are the main excerpts from this document:
- the employee bears disciplinary liability for being at the workplace in a state of drug or alcohol intoxication;
- the employee is obliged to bear responsibility for complete failure or improper performance of his basic job functions and duties.
In addition, the employee is responsible for:
- for causing material damage to the organization;
- for committing offenses or crimes in the workplace;
- for conflicts or inciting discord in the work team.
Thus, Instrumentation mechanic, like any other employee, is obliged to bear disciplinary, administrative or criminal liability for certain types of acts, depending on their severity and scale.
Education required for work
How and where do you need to study to get the profession of “instrumentation and automation engineer”? Training for this profession is available almost everywhere, and obtaining the education necessary for the specialty will not be difficult. Thus, the specialty of the same name is present in almost any technical school or college, which can be entered on the basis of 9 years of school. The duration of training is about 3-4 years. However, it is worth noting that there are also special courses where you can obtain qualifications much faster. There are, however, they are not everywhere; but the number of disciplines and curricula compared to it is not much different.
Among the educational cycles necessary for obtaining an education are:
- educational practice;
- Physical Culture;
- professional certifications.
About the 2nd and 3rd category in the profession
The Unified Tariff and Qualification Directory characterizes the profession in question as a job with seven categories. Each skill level has its own range of responsibilities and functions. The 2nd and 3rd categories in the profession are, one might say, initial. As a rule, college graduates who have just completed their studies, workers with little experience, etc. are concentrated here. Here are examples of work typical for a specialist with a 2nd or 3rd category:
- work with large relays, distributors and regulators; their assembly and repair;
- assembly and calibration of copper or platinum resistance thermometers;
- assembly, repair and adjustment of compact thermocouples;
- production, repair and commissioning of clamps of varying degrees of complexity;
- drilling, grinding, reaming, pinning and other work with gears, bushings, mounting rings, screws, etc.
About the 4th and 5th ranks in the profession
The Unified Tariff and Qualification Handbook contains instructions on job descriptions for specialists of the 4th and 5th categories. It is in these documents that the main examples of the work of specialists are fixed. Here approximate types works that should be carried out by a mechanic with the 4th category:
- capital or scale commodity or automobile scales with an indicating device, bunker or analytical scales;
- repair or restoration of adding machines;
- replacement of necessary parts in auto regulators;
- inspection, repair or adjustment work.
An instrumentation and automation engineer with a 5th category is capable of carrying out work of approximately the following type:
- repair and adjustment of sights;
- replacement of gear axes;
- balancing of moving devices;
- repair of assembly tables;
- revision of polarized relays, etc.
About the 6th and 7th ranks in the profession
The ranks of an instrumentation engineer indicate a lot: the level of education, work experience, professional skills, etc. The 6th and 7th qualification levels are considered quite important and prestigious.
What types of work are typical for specialists with the 6th category?
- Adjustment of autoregulators and heat measuring instruments on existing equipment.
- Repair of electronic equipment.
- Working with automatic portion scales.
- Work with wagon standard scales.
- Oscilloscope repair.
- Works with
- Repair, adjustment and commissioning of various electronic sampling devices.
What types of work are typical for a specialist with the 7th category? Here are some examples:
- testing and verification of microprocessor devices (pressure sensors, differential pressure gauges, etc.);
- verification and testing work with gas analyzers, measuring instruments (moisture, salt, pressure, etc.).
About the 8th category in the profession
A specialist with the eighth category is considered the most important and experienced specialist in production. Naturally, this kind of employee is endowed with especially complex functions. What does the professional standard establish in this case?
An instrumentation fitter with the latest level of qualification, in addition to managerial responsibilities, must also:
- draw up and maintain programs for microprocessor controllers, regulators and other devices;
- select the necessary characteristics that would meet the efficient, but at the same time economical and optimal operation of the equipment;
- check, test and commission level gauges, recorders, vibration meters, devices with intelligent pressure sensors, paperless recorders, computer-based devices, etc.
A specialist may have many other functions, but everything here will depend on the orders of his superiors and his place of work.
I APPROVED
Managing Director of the Qualifications Development Department
All-Russian public organization "Russian Union of Industrialists and Entrepreneurs"
Yu. V. Smirnova
JOB DESCRIPTION
adjuster of instrumentation and automation, 8th category
Divisions " Complex technologies»
1. General Provisions
1.1. This job description defines the functional, job responsibilities, rights and responsibilities of the 8th category instrumentation and automation adjuster of the “Complex Technologies” division (hereinafter referred to as the 8th category instrumentation and automation adjuster) All-Russian public organization “Russian Union of Industrialists and Entrepreneurs” ( hereinafter Institution).
1.2. A person who meets the following education and training requirements is appointed to the position of instrumentation and automation adjuster of the 8th category:
with practical work experience:
Special conditions for admission to work as an adjuster of instrumentation and automation of the 8th category:
1.3. An adjuster of instrumentation and automation of the 8th category must know:
1.4. An 8th grade instrumentation and automation technician must be able to:
1.5. An adjuster of instrumentation and automation of the 8th category is appointed to the position and dismissed from the position by order of the managing director of the qualifications development department of the Institution in accordance with the current legislation of the Russian Federation.
1.6. The instrumentation and automation adjuster of the 8th category reports to the managing director of the qualifications development department of the Institution and the head of the “Complex technologies” department
2. Labor functions
3. Job responsibilities
4. Rights
An adjuster of instrumentation and automation of the 8th category has the right to:
4.1. Request and receive the necessary information, as well as materials and documents related to the activities of an adjuster of instrumentation and automation of the 8th category.
4.2. Improve your qualifications, undergo retraining (retraining).
4.3. Enter into relationships with departments of third-party institutions and organizations to resolve issues within the competence of an adjuster of instrumentation and automation of the 8th category.
4.4. Take part in the discussion of issues included in his functional responsibilities.
4.5. Make suggestions and comments on how to improve activities in the assigned area of work.
4.6. Contact the relevant local government bodies or the court to resolve disputes arising during the performance of functional duties.
4.7. Use information materials and regulatory documents necessary to fulfill your job responsibilities.
4.8. Pass certification in the prescribed manner.
5. Responsibility
The instrumentation and automation adjuster of the 8th category is responsible for:
5.1. Failure to perform (improper performance) of one’s functional duties.
5.2. Failure to comply with orders and instructions from the Managing Director of the Qualifications Development Department of the Institution.
5.3. Inaccurate information about the status of fulfillment of assigned tasks and instructions, violation of deadlines for their execution.
5.4. Violation of internal labor regulations, fire safety and safety regulations established in the Institution.
5.5. Causing material damage within the limits established by the current legislation of the Russian Federation.
5.6. Disclosure of information that has become known in connection with the performance of official duties.
For the above violations, an operator of control and measuring instruments and automation of the 8th category may be subject to disciplinary, material, administrative, civil and criminal liability in accordance with current legislation, depending on the severity of the offense.
This job description has been developed in accordance with the provisions (requirements) of the Labor Code of the Russian Federation dated December 30, 2001 No. 197 FZ (Labor Code of the Russian Federation) (with amendments and additions), professional standard“Specialist in the field of instrumentation and automation” approved by order of the Ministry of Labor and Social Protection of the Russian Federation dated February 15, 2017 No. 181n and other regulations governing labor relations.
\Standard job description for an adjuster of instruments, equipment and automatic control, regulation and control systems (instrument and automation adjuster) 4th category
Job description of an adjuster of instruments, equipment and automatic monitoring, regulation and control systems (instrument and automation adjuster) 4th category
Job title: Installer of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) 4th category
Subdivision: _________________________
1. General Provisions:
- Subordination:
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) of the 4th category is directly subordinate to...........................
- An adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) of the 4th category follows the instructions......................... ...........................
- Installer of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) of the 4th category replaces........................... ........................................................ ....
- Replaces the 4th category instrument, equipment and automatic monitoring, regulation and control system adjuster (instrument and automation adjuster) ........................... ........................................................ ..
(the instructions of these employees are followed only if they do not contradict the instructions of the immediate supervisor).
Substitution:
Hiring and dismissal:
An adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) is appointed to the position and dismissed by the head of the department in agreement with the head of the department.
- Must know:
- basics of electrical engineering and electronics. Purpose, design and principle of operation of automatic control, regulation and control equipment of category I complexity. Model instruments and devices designed to test working measurement systems. Methods of installation and adjustment of devices of category I complexity. Instructions of the State Committee of Standards, Measures and Measuring Instruments of the USSR for testing working devices of category I complexity. Rules for reading electrical diagrams.
- Pre-installation check, autonomous and comprehensive adjustment of automatic monitoring, regulation and control equipment of category I complexity.
page 2 Job description Installer of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster)
4. Rights
- An adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) has the right to give instructions and tasks to his subordinate employees on a range of issues included in his functional responsibilities.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) has the right to monitor the implementation of production tasks and the timely execution of individual orders by employees subordinate to him.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) has the right to request and receive necessary materials and documents related to issues of his activities and the activities of his subordinate employees.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) has the right to interact with other services of the enterprise on production and other issues included in his functional responsibilities.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) has the right to get acquainted with draft decisions of the enterprise management concerning the activities of the Division.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (kit and automation adjuster) has the right to submit proposals for the manager’s consideration to improve the work related to the responsibilities provided for in this Job Description.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) has the right to submit for consideration to the manager proposals on rewarding distinguished employees and imposing penalties on violators of production and labor discipline.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) has the right to report to the manager about all identified violations and shortcomings in connection with the work performed.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) is responsible for improper performance or failure to fulfill his job duties provided for in this job description - within the limits determined by the labor legislation of the Russian Federation.
- The adjuster of instruments, equipment and automatic control, regulation and control systems (balance and automation adjuster) is responsible for violating the rules and regulations governing the activities of the enterprise.
- When transferring to another job or dismissal from a position, the adjuster of instruments, equipment and automatic control, regulation and control systems (balance and automation adjuster) is responsible for the proper and timely delivery of work to the person taking up the present position, and in the absence of one, to the person replacing him or directly to your manager.
- The adjuster of instruments, equipment and automatic control, regulation and control systems (the adjuster of bales and automation) is responsible for offenses committed in the course of his activities - within the limits determined by the current administrative, criminal and civil legislation of the Russian Federation.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) is responsible for causing material damage - within the limits determined by the current labor and civil legislation of the Russian Federation.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (balance and automation adjuster) is responsible for compliance with the current instructions, orders and instructions for preservation trade secret and confidential information.
- The adjuster of instruments, equipment and automatic monitoring, regulation and control systems (kit and automation adjuster) is responsible for compliance with internal regulations, safety and fire safety rules.
Head of structural