I offer an interesting dacha idea, which I found quite entertaining. Your patio can be decorated with this wonderful cable reel table. Of course, you need to understand that not everyone has the opportunity to easily get such a reel. However, if, for example, your husband is a cable engineer, then I fully admit the possibility of acquiring it.
The main idea of the idea is to use the second, lower part of the coil as the basis for the benches. Additionally, you will need to prepare boards for the legs of the benches. Otherwise, everything is simple - we cut out the bottom circle with a jigsaw, refine the cut, and mount the legs.
The benches can be pushed in when the table is not in use, this, as you can imagine, will help reduce the space occupied by the table. To stay attractive longer appearance Products and boards are recommended to be treated with protective impregnation and varnished.
Coils can be different sizes, and, probably, the large ones can be used for adults, and the small ones for children. Or simply for site decoration, as a stand for potted plants or landscape decoration.
If you are interested in this idea, show it to your man, perhaps he can understand from the photo how to make such a design.
And another nice feature of these coils is that there is a hole in the center where you can insert a garden umbrella so that you can sit in the shade even in hot sunny times, or take shelter from sudden summer “mushroom” rain.
Ru →
A wooden cable reel or a steel rope drum is a suitable base for making original table with your own hands. Depending on the size of the initial blanks, a large dining table, a small coffee table and even entire furniture sets are obtained.
Wooden drum - dimensions and materials
The cable drum consists of two circles and a hollow cylinder, firmly connected by fasteners, and is designed for winding electrical and metal wires for various applications onto a rod.
Industrial manufacturers offer a variety of coil sizes, guided by government standards and their own technical specifications(TU) and individual consumer requests. Thus, GOST 5151-79 and GOST 11127-78 contain several dozen possible standard sizes of drums with a width (circle diameter) from 40 to 350 cm and a height from 23 to 180 cm. Edged lumber of softwood and hardwood, as well as plywood, are used for the manufacture of products . Reels made from boards have stacked and multi-layered circles (pictured below on the left), those made from plywood are solid and thin (pictured on the right), which determines the aesthetics final products of them.
How to make a table from a cable reel
To get the table as much as possible natural form Simply clean the workpiece from dirt, sand it manually with sandpaper of different grain sizes or sand it with an electric tool, and finally remove the working dust with a brush or dry cloth. Your DIY reel table is ready!
To give the table more modern look it is covered with stain, oil or varnish, painted, patterns and inscriptions are applied, and pasted over mosaic tiles, decorated with fabric and leather, wrap the stand with jute, sisal, hemp, cotton or linen cord or rope, place it on top round glass or a mirror. If desired, wheels are attached to the table, lighting is built in, a sun umbrella is inserted into through hole in the center, and in wide feet arrange a storage compartment. From half the coil comes a semicircular console for placement against the wall.
Reels of different sizes are used to make furniture sets. So, to dining table, small drums are used to make stools, chairs and armchairs. Placed on top of each other and securely fastened in this way, the coils form a stand. The circle is used separately as a tabletop for a metal or other base, as well as a base for wall clock, mirrors or panels.
Surely many people sooner or later have this useless, at first glance, wooden bandura on their property. However, as it turns out, entire furniture sets can be made from this unsightly spool!
The most important thing is that to make a table or chair you will need this same wooden cable reel. And then - whatever your imagination tells you. For decoration you can use wallpaper, newspapers, glass, textiles.
Before you begin the creative stage, you need to properly prepare the coil: clean the surface with sandpaper or a sanding machine.
If you plan to make garden furniture, be sure to treat the coil with an anti-rot solution. Now you can start creating!
Reel furniture - tables
They are the easiest to make. The coil for the table does not need to be sawed. Simply paint it in your favorite color. But if you want an original piece of furniture, you will have to try. Fans of vintage style can cover the reel with white paint with the addition of soap solution until the surface becomes matte. For decoration, decorate the bottom shelf with old skates, lanterns, and dried daisies in a white vase.
If you want a bright, original table, you can cover it with newspaper clippings, decorate it with napkins or old wallpaper. Be sure to coat the top with clear varnish.
To make it possible to sit comfortably in the garden in hot sunny weather, drill a hole in the middle for an umbrella.
If you plan to install a table in the living room, screw on the wheels from an old sofa. In this case, the piece of furniture can become both a book stand and a mobile minibar. To make the table fit more organically into the interior, it can be decorated with rope or decorated with mosaics.
Reel furniture - sofas and armchairs
You will have to tinker a little with this furniture. First you need to disassemble the coil. Using a jigsaw, cut out grooves in the circles to install boards for the seat. The result depends on the length of the boards you choose - whether it will be a sofa or an armchair.
You can use the same slats that you will remove during disassembly. In addition, if you leave the circles in their original form, you will end up with a “rocking chair”. If you cut the supporting part evenly, you will have “static” furniture.
In the case of a rocking chair, the main thing is not to forget to nail the stops so that it does not tip over. Prepare locknuts along the length of the boards in advance, otherwise the structure will fall apart.
Now it's time to assemble. Insert prepared boards of the same length into the grooves, then fasten the circles together with rods and tighten them with nuts.
Now comes the creative process. A sofa or chair can be painted in a color suitable for the interior or landscape. When dry, pick up pillows or sew them yourself.
If you want furniture with upholstery, stock up on fabric and foam rubber. Using a furniture stapler, cover the slats with textiles, padding them with foam rubber. By the way, you can nail small square boards to the sides of the circles, and you will get convenient shelves.
From the reel small size make an ottoman. It turns out easy and fast. Prepare the drum in advance: sand, polish, paint. Then you will need foam rubber, textiles and a furniture stapler. Cut out fabric and foam rubber to fit the circle. Now use a stapler to nail the fabric, stuffing foam rubber underneath it. The cute ottoman is ready!
Reel furniture - garden set
You can make a whole set of furniture from one spool. Namely, a table and benches. The drum needs to be partially disassembled: just remove one circle. It will just be a table on a leg. Treat it and paint it as you wish. Cut a separate circle in half and cut out semicircles from each part. Now knock down the supports from the bars and attach them to the semicircles. The benches are ready! All that remains is to paint them in the color of the table.
A table made from a reel looks very beautiful and stylish. Moreover, this design requires a minimum of tools and materials. You can also save time and effort.
Features of a DIY reel table
The peculiarity of this design is that you do not have to create a preliminary design and cut out parts from the material. This will save a lot of time. There are several ways to make a table based on a coil:
- Place the reel on the floor. First, the room is cleared of dirt and debris. There is no need to do any additional steps. The design will look a little rough (due to the presence of cracks and scratches on the surface). But it will fit well into the interior of the room.
- You can also paint and varnish such a table. We do the same as in the previous step, having first painted the structure. Then it needs to be varnished. This will give a new and aesthetic appearance.
- Cover the table with mosaics or do decoupage. These types of decorations will make the table very beautiful. Anything is suitable for mosaic and decoupage, depending on your imagination.
- You can make a tabletop. This method requires more action. It is necessary to cut out the top part of the coil. This will be our tabletop. Then the legs are attached to it. You can place round glass on the tabletop (its size is equal to the size of the tabletop). It looks very nice.
- If the coil has a small height but a large width, this is an ideal basis for creating a book or coffee table. Books can be stored between the top and bottom. And on the top part put items needed in everyday life. Very often, wheels are mounted on such a structure so that it can be moved.
- Table-sink for a summer residence. Another great idea is to make a sink. To do this, you need to run a water supply to the coil and cut out places for the tap and sink. Such tables are good for washing vegetables and fruits, but you can also wash your hands.
Reference! You can make a table for changing baby's diapers. The process of changing diapers will be carried out on the surface, and you can store diapers between the bottom and top.
What tools and materials are needed?
Creating such a table requires a minimum of materials and tools:
- Ready cable reel.
- Paint and varnish.
- Moisture protection solutions.
- Decoration elements.
Attention! You can not use the whole coil, but disassemble it, taking only parts. For example, by removing one of the surfaces, we can do interesting table, where the main part (on which the cable is wound) will be the stand.
A table made from a cable reel yourself: step by step
As already mentioned, creating such a table does not involve creating a design plan or cutting out parts. You just need to install the coil. But there are still a few preliminary steps:
But there are still cases when you can’t do without a project plan and cutting. This is necessary when its base will be used as a stand, and one of the surfaces is cut out. Such tables are created as follows:
- We carry out all the preparatory steps described above.
- We remove one of the surfaces.
- Using a jigsaw, we process the second surface. Initially its shape will be round. But you can make the surface square or any other shape.
- We cover the table with paint and varnish.
Making a table from a reel with your own hands is very simple. There is no need to assemble the structure piece by piece, as is the case with a regular table. Such designs are suitable not only as a home table, but can also be used in the country.
From a large reel of cables you can make an original and interesting table with a designer print on the tabletop. How exactly, watch and read in the given master class.
Materials
To make a table from a cable reel with your own hands, prepare:
- the coil itself;
- rope;
- oil for wooden products;
- rags;
- paint;
- wood varnish, transparent;
- pencil;
- brushes;
- roulette;
- ruler;
- jigsaw;
- drill;
- stationery knife;
- saw, jigsaw or other tool for cutting wood.
Step 1. We will make the base of the table from a coil in the shape of a cross. To do this, you should draw the expected shape on one of its sides. Be sure to check the accuracy of the calculations and make sure the proportions of the resulting base template are correct.
Step 2. Trim off any excess on the base of the future table, following the outlined lines.
Step 3. Prepare sandpaper or sanding attachments of different grits. Sand all surfaces of the reel. You can treat the base with rough paper, but you will need to work more carefully with the tabletop. First, take 80-grit paper for processing, then change it to copies with a lower grain, up to 240. This is important, since the surface must be perfectly smooth, but the texture of the wood must be preserved.
Step 4. Wipe the entire reel completely with a dry cloth, clearing it of any working dust and garbage. After, her bottom part and coat the tabletop with a transparent special oil for wood. Rub everything and leave everything until the surface is completely dry.
Step 5. Drill a hole in the reel stand at the very base of the tabletop for the rope. Thread it in, bring it out through the hole at the top and, after tying a knot, pull the rope back.
Wrap it around the counter. Make the turns tight. Slightly short of the base, fix the rope in the same way.
Step 6. If you also want to print on the tabletop, use a stencil for painting. You can buy it ready-made, order it, or make it yourself. In this case, it was made by hand. To do this, the tabletop was sealed with strips of masking tape. Afterwards, an outline drawing was drawn on it. Cutting it out is not an easy task. To do this, you need a utility knife, care not to damage the tabletop, and patience.
Step 7. Paint the tabletop using a stencil. Apply matching paint to the table leg.